I'm looking for some code snippet that will allow me to use ADO.NET and the SQL Native client for database failover scenarios.
Currently what I have does not work and am running out of options.
I would greatly appreciate any help.
Thanks,
Luis B
Hi everyone,
Does anyone has ever written VbScript .Net stuff which do anything like that?? I've got a dtsx package and I'd need covering along folder looking for subfolders and so on
objFSO = CreateObject("Scripting.FileSystemObject")
objFolder = objFSO.GetFolder("c: est")
colSubfolders = objFolder.Subfolders
For Each objsubfolder In colSubfolders
...
...
Thanks in advance and best regards,
Has anyone else bought SQL Server 2005 Practical Troubleshooting The Database Engine?
On page 32 there is this sample query that uses the amalgam.dm_os_waiting_tasks_filtered view. But the view creation script is not included and I haven't been able to get a response on this from any of the websites/email addresses mentioned in the book.
Can anyone help?
selectwt.*,
er.wait_resource
fromamalgam.dm_os_waiting_tasks_filtered wt
left joinsys.dm_exec_requests er on wt.waiting_tasks_address=er.task_address
Hello, I've a problem with a software developed in C# with the framework 2.0. This is the error I receive : The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "XXX_LINKED_SERVER" was unable to begin a distributed transaction. OLE DB provider "SQLNCLI" for linked server "XXX_LINKED_SERVER" returned message "No transaction is active.". If I try directly to restart the process, it works fine. Is there someone who can help me ? This is the process 1. In C# --> Call of a Query : select from the linked server (db in sql 2005) and insert into a table SQL 2005 2. In the C# --> using (TransactionScope scope = new TransactionScope()) and insert in a table in SQL 2005 which is link server Thank in advance.
View 1 Replies View Relatedhi guys,
I'm using MS SQL Server 2005 with MDAC 2.8. When I test my project into TCP/IP, the project does not pick the records completely.
My connection string is using Provider=SQLNCLI.1
Do I need to install SQL Native Client to work-stations ?
Do I need to remove the MDAC ?
Than you.
I have a strange problem.
On almost all clients I can connect to mys database server using sqlcmd -S <server> and the connection is authenticated using kerberos.
One one of my clients the command fails. When I have Named Pipes enabled the connection works fine but is made with NTLM authentication.
All servers and clinets are members of the same domain and thay are ll on the same LAN segment. No firewalls are active anywhere.
Where do I look for a solution?
Hello Folks,
We are using the Redistributable installer for the SQL Native client, SQLNCLI.MSI, with our solution. On MSDN here: http://msdn.microsoft.com/en-us/library/ms131334.aspx it recommends using the APPGUID keyword to specify your application product code. This is to ensure that the installer will know the dependancy between the Native Client and your application.
Unfortunately there doesn't seem to be much info around APPGUID itself. Does anyone know how that ID is generated? What the rules around it are? Or just some better definition of where it comes from?
Thanks, Mark
I was trying to update a named instance of SQL Express SP1. I double clicked it and during extraction I get this error message:
The file C:Document and SettingsByersNLocal SettingsTempBSISQLEXP05TRACTsetupsqlcli.msi could not be opened.
SQL Express came bundled with another porgram so I'm thining it could be a bad cd. I also thought about reinstalling Windows Installer 3.1. Anybody experience this error?
I recently my hosting company to provide SQLNCLI provider for MS SQL2005 DB. Right now, they are only providing SQLOLEDB provider for connection.
Connection is slow and unreliable at this point using sqloledb while it was running fine with SQL 2000 db.
When I asked them for SQLNCLI, they replied...
------------------
Unfortunately we cannot install the SQLNCLI driver for MSSQL 2005 as it runs under the system context which would be a security risk to the server. I apologize for the inconvenience.
If you have any questions or require additional assistance, please do not hesitate to contact our support team anytime at
----------------------
How true is this? Will it be really risk? It doesnt make sense to me if this would be risk why microsoft even will produce it.
Can anyone throw some light on this issue?
Thanks
I have spend days trying to install SQLEXPR_ADV.EXE. I need it to run the Pinnacle Studio 10 installation fully. I have managed to switch on all the services that the set up demanded, but I keep getting stuck because the installation cannot find sqlncli.msi. I have a copy of it from the SQL site, but where do I stick it so that the installer can find it. I have tried to place it in the SQL directory in Program Files, I have placed it in the folder which is generated by the installer, I have sat it next to the Installer itself but to no avail. I have installed the msi independently nd the process says that it was successfully installed but the SQL2005 Express Installed still cannot find it.
Help!
Hi all,
I need to be able to create a DSN through code that connects to SQL Server using SQL Native Client. I have found the following article: http://support.microsoft.com/kb/q184608/. This demonstrates most of what I need, but it does not show how to set the username and password, which is something that I need to do.
Any ideas how I can do this?
Regards,
Stephen.
I tried to install a sql 2005 desktop engine. This fails with the error: An installaton package for the product Microsoft SQL Server Native Client cannot be found. Try the installation again using a valid copy of the installation package €˜sqlncli.msi€™ I used a fresh, new download SQLEXPR.EXE. What shall I do?
I've been assigned with finding the issue behind this error on one of our production systems:
TCP Provider: The semaphore timeout period has expired. [SQLSTATE 07008] (Error 121) OLE DB provider "SQLNCLI" for linked server "SERVER1" returned message "Communication link failure". [SQLSTATE 01000] (Error 7412). The step failed.
I've Googled the error to death, searched the forums here and at other SQL sites as well and have found nothing that points me at the cause. I've found the individual parts of the error but not the whole. Maybe I've just been looking at it too long and am missing something simple. Anyone have any ideas?
These are two linked SQL2005 64bit enterprise Win2k3 servers. The error comes when an automated daily job is run. Sometimes it happens at once, sometimes after 5 minutes, sometimes after an hour. I can see nothing wrong with the server itself or the network.
Thanks in advance.
I am running a SQL2K on a Server2K box. I have linked servers to SQL2005 Express on WinXP. I am trying to get data off of the SQL2005 DB to the central DB on SQL2K. This has been running for about a year. I am now getting an error message as follows:
Server: Msg 7356, Level 16, State 1, Line 1
OLE DB provider 'SQLNCLI' supplied inconsistent metadata for a column. Metadata information was changed at execution time.
OLE DB error trace [Non-interface error: Column 'TestVarChar' (compile-time ordinal 2) of object '"WKS"."DBo"."testtable"' was reported to have changed. The exact nature of the change is unknown].
When I run the following Queries on the SQL2K box:
SELECT * from WKSA400.WKS.DBo.testtable
or
SELECT * from OPENQUERY(WKSA400, 'SELECT * from WKS.DBO.testtable')
I did notice that if my testtable has only numeric fields, it works fine. It only has a problem with alphanumeric fields.
If I run 'exec sp_tables_ex WKSA400' on the SQL2K, it works fine. I get a listing of all the tables on the remote server. This tells me that my security is fine. It seems to be a conversion from the 2005 to 2000 SQL. If it had not been working for over a year, the dent in the wall the size of my head would be much smaller.
Howdy Folks!
So I tried the typical IDBDataSourceAdmin:estroyDataSource() command to destroy an existing sql server 2005 express database and guess what it returned:
E_NOTIMPL (not implemented)
This leaves me in the dark on how I'm supposed to drop an existing database in SQL Native Client OLEDB. Any ideas?
My specific code is:
//Set initialization properties.
hr = m_pIDBInitialize->QueryInterface(IID_IDBProperties, (void **)&m_pIDBProperties);
CHKHR(hr, L"Failed to obtain IDBProperties interface", _ExitCreate);
// Sets properties in the Data Source and initialization property groups
hr = m_pIDBProperties->SetProperties(uiNumPropsets, dbpropset);
CHKHR(hr, L"Failed to set data source properties", _ExitCreate);
//Attempt to initialize connection
hr = m_pIDBInitialize->Initialize();
hr = m_pIDBDataSourceAdmin->DestroyDataSource();
hr = m_pIDBInitialize->Uninitialize();
Thanks!!
Hi,
I just migrated a SQL7 instance into SQL2005. Use the backup and restore method. The following was the steps done :
1) Database Backup from sql7 and restore on sql2005
2) Create user on sql2005
3) Configure SQL Native client for instance
- When apps tried to access the server, they encounter the following error
Could not find server ServernameSQL7 in sys.servers. Verify that the correct server name was specified. If necessary, execute the stored procedure sp_addlinkedserver to add the server to sys.servers. - /elogs/lib/db.asp, line 70
4) As requested, i ran sp_addlinkedserver Servername. After which the apps got back with this error
OLE DB provider "SQLNCLI" for linked server "Servername" returned message "Login timeout error" - /elogs/lib/db.asp, line 70
I am unsure of how to proceed from here. Please assist.
Thanks and Regards,
Siva
Hi~~.
In client side, the sqlncli is needed.
Below is the script of installing sqlncli.msi package.
msiexec /i sqlncli.msi /quiet /norestart /le C:sqlncli.log
Question is, how can I check the installation?
If it is already installed skip the installing process.
If not install the package.
I am running an SSIS package to extract data from a source SQL Server database to our own database. The source is on a linked server. The package worked until a column size was increased on a table on the source.
If I run a query against the linked server table I get the following error:
'OLE DB provider 'SQLNCLI' for linked server 'GSC-RPT.SVR.BANKONE.NET' returned data that does not match expected data length for column '[GSC-RPT.SVR.BANKONE.NET].[Peregrine].[dbo].[scProblem].short_description'. The (maximum) expected data length is 100, while the returned data length is 160.'
I've tried deleting the links and recreating them. Nothing works. I don't understand why my database query is expecting a data length of 100. Why does it not pick up the definition of the field length from the linked server? How has it retained this expectation when I have deleted the linkage and recreated it?
Hi,
I am trying to setup up a linked server in our test environment that allows Server A to run a stored procedure that writes to server B. However, I am receiving the following errors when attempting to make the connection and execute the stored procedure.
OLE DB provider "SQLNCLI" for linked server "TEST2" returned message "Invalid authorization specification".
Msg 7399, Level 16, State 1, Procedure Test_SP, Line 230
The OLE DB provider "SQLNCLI" for linked server "TEST2" reported an error. Authentication failed.
Msg 7303, Level 16, State 1, Procedure Test_SP, Line 230
Cannot initialize the data source object of OLE DB provider "SQLNCLI" for linked server "TEST2".
I've created a user (linkuser) that has db_reader/db_writer access to the destination box. I'm using SQL Server under the Server type on the General Tab. I've added the user(linkuser) as the local login to impersonate on the destination box. However, the stored procedure is still erroring. Any Suggestions?
Thanks,
J
I have a client/server app with a connection string:
Provier=SQLNCLI;Server=ServerIP;Database=DBName;UID=Name;PWD=Password
This connection string works for Vista 64bit but not for Vista Business 32bit...
What have I done so far to the Vista Business 32bit...
1. Downloaded/Installed SQLNCLI from Microsoft Site
2. Tested the connection string several ways with no luck...
3. Was able to get Vista Business 32bit to connect via a File DSN with the same credentials... DSN route is not an option for this app...
Any ideas?
I am linking to another SQL Server database to extract data into my own system. Following an increase in size on one of the columns in a table I am extracting, I am getting the following error:
'OLE DB provider 'SQLNCLI' for linked server 'gsc-rpt.svr.bankone.net' returned data that does not match expected data length for column '[gsc-rpt.svr.bankone.net].[Peregrine].[dbo].[scProblem].short_description'. The (maximum) expected data length is 100, while the returned data length is 148'
The column short_description has been increased from 100 to 1024. Writing a simple query, SELECT (max(len(short_description)) FROM dbo.Peregrine_Problem will generate the error, but if I embed the same SQL into an Excel VBA macro and connect to the server, it happily returns the result 1024. Our Access databases also link to the table on the remote server and handle the increased column size properly.
I have done everything I can think of, including deleting the linked server within SQL Server MS, and recreating it, but I can't override the setting of 100.
Any ideas?
Does anyone know how to configure a mirrored pair as a linked server on a 3rd instance?
Say I have a mirrored database on two servers: PRIMARY and SECONDARY.
I want to create a linked server on a 3rd machine that allows me to access the database on the mirrored pair.
This is what I'm using:
EXEC master.dbo.sp_addlinkedserver
@server = N'MIRROR',
@srvproduct=N'',
@provider=N'SQLNCLI',
@provstr=N'Server=PRIMARY;FailoverPartner=SECONDARY;'
select count (*) from mirror.pubs.dbo.authors
and it works fine if the database on PRIMARY is alive. however when the mirror has failed over to SECONDARY and PRIMARY is no longer available, I get the following when I try to query the database via the linked server:
OLE DB provider "SQLNCLI" for linked server "MIRROR" returned message "Login timeout expired".
OLE DB provider "SQLNCLI" for linked server "MIRROR" returned message "An error has occurred while establishing a connection to the server. When
connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.".
Msg 10061, Level 16, State 1, Line 0
TCP Provider: No connection could be made because the target machine actively refused it.
As far as I can tell, it doesn't try to contact SECONDARY at all. It seems like SQL Server is ignoring the FailoverPartner attribute.
If I switch PRIMARY and SECONDARY in the connection string (ie @provstr=N'Server=SECONDARY;FailoverPartner=PRIMARY;') then it works when SECONDARY is online, but not when the mirror has failed back to PRIMARY.
Any ideas?
Piers.
I have .NET Framework 2.0 and Visual studio 2005 installed on my machine. I also have SQL Server 2000 Developer Edition installed with Service Pack 4.
When I try to install SQL Server 2005 express, I get an error when the setup tries to install SQL Native Client. I have read many forums, but couldnt find a resolution. I can not see SQL Native Client in my Add Remove Programs either.
I tried to unzip the SQLEXPR.exe into a temp folder and when I right click sqlncli.msi and say Repair or Uninstall. It says "This action is valid for products that are currently installed."
When i try to run the sqlncli.msi file ..i get an error message saying "Installation of Microsoft SQL Server Native Client failed because a higher version already exisits on the machine. To proceed uninstall the higher version and then run Microsoft SQL Server Native Client Setup"
Please help as I am unable to install SQL Server 2005 Express....
SQL Server Native Client -- Set up failed
SQL VSS Writer -- Set up failed
Database Services -- Set up failed
Thank you in advance
Log mesg -==
Verbose logging started: 12/17/2007 23:18:36 Build type: SHIP UNICODE 3.01.4000.4039 Calling process: c:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe ===
MSI (c) (74:B4) [23:18:36:828]: Resetting cached policy values
MSI (c) (74:B4) [23:18:36:828]: Machine policy value 'Debug' is 0
MSI (c) (74:B4) [23:18:36:828]: ******* RunEngine:
******* Product: {50A0893D-47D8-48E0-A7E8-44BCD7E4422E}
******* Action:
******* CommandLine: **********
MSI (c) (74:B4) [23:18:36:828]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (74:B4) [23:18:36:828]: Grabbed execution mutex.
MSI (c) (74:B4) [23:18:36:828]: Cloaking enabled.
MSI (c) (74:B4) [23:18:36:828]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (74:B4) [23:18:36:828]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (100) [23:18:36:828]: Grabbed execution mutex.
MSI (s) (10:E0) [23:18:36:843]: Resetting cached policy values
MSI (s) (10:E0) [23:18:36:843]: Machine policy value 'Debug' is 0
MSI (s) (10:E0) [23:18:36:843]: ******* RunEngine:
******* Product: {50A0893D-47D8-48E0-A7E8-44BCD7E4422E}
******* Action:
******* CommandLine: **********
MSI (s) (10:E0) [23:18:36:843]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (10:E0) [23:18:36:843]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (10:E0) [23:18:36:843]: User policy value 'DisableMedia' is 0
MSI (s) (10:E0) [23:18:36:843]: Machine policy value 'AllowLockdownMedia' is 0
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Media enabled only if package is safe.
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Looking for sourcelist for product {50A0893D-47D8-48E0-A7E8-44BCD7E4422E}
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Adding {50A0893D-47D8-48E0-A7E8-44BCD7E4422E}; to potential sourcelist list (pcode;disk;relpath).
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Now checking product {50A0893D-47D8-48E0-A7E8-44BCD7E4422E}
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Media is enabled for product.
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Attempting to use LastUsedSource from source list.
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Processing net source list.
MSI (s) (10:E0) [23:18:36:843]: Note: 1: 1706 2: -2147483647 3: sqlncli.msi
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Processing media source list.
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Trying media source G:.
MSI (s) (10:E0) [23:18:36:843]: Note: 1: 2203 2: G:sqlncli.msi 3: -2147287038
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
MSI (s) (10:E0) [23:18:36:843]: Note: 1: 1706 2: -2147483647 3: sqlncli.msi
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Processing URL source list.
MSI (s) (10:E0) [23:18:36:843]: Note: 1: 1402 2: UNKNOWNURL 3: 2
MSI (s) (10:E0) [23:18:36:843]: Note: 1: 1706 2: -2147483647 3: sqlncli.msi
MSI (s) (10:E0) [23:18:36:843]: Note: 1: 1706 2: 3: sqlncli.msi
MSI (s) (10:E0) [23:18:36:843]: SOURCEMGMT: Failed to resolve source
MSI (s) (10:E0) [23:18:36:843]: MainEngineThread is returning 1612
MSI (c) (74:B4) [23:18:36:859]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (74:B4) [23:18:36:859]: MainEngineThread is returning 1612
=== Verbose logging stopped: 12/17/2007 23:18:36 ===
Does anyone know how to configure a mirrored pair as a linked server on a 3rd instance?
Say I have a mirrored database on two servers: PRIMARY and SECONDARY.
I want to create a linked server on a 3rd machine that allows me to access the database on the mirrored pair.
This is what I'm using:
EXEC master.dbo.sp_addlinkedserver
@server = N'MIRROR',
@srvproduct=N'',
@provider=N'SQLNCLI',
@provstr=N'Server=PRIMARY;FailoverPartner=SECONDARY;'
select count (*) from mirror.pubs.dbo.authors
and it works fine if the database on PRIMARY is alive. however when the mirror has failed over to SECONDARY and PRIMARY is no longer available, I get the following when I try to query the database via the linked server:
OLE DB provider "SQLNCLI" for linked server "MIRROR" returned message "Login timeout expired".
OLE DB provider "SQLNCLI" for linked server "MIRROR" returned message "An error has occurred while establishing a connection to the server. When
connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.".
Msg 10061, Level 16, State 1, Line 0
TCP Provider: No connection could be made because the target machine actively refused it.
As far as I can tell, it doesn't try to contact SECONDARY at all. If I switch PRIMARY and SECONDARY in the connection string (ie @provstr=N'Server=SECONDARY;FailoverPartner=PRIMARY;') then it works when SECONDARY is online, but not when the mirror has failed back to PRIMARY.
Any ideas?
Piers.
I'm trying to retrieve native character data (SQL_WCHAR) through ODBC into an SQL_C_CHAR buffer using SQLBindCol and SQLFetch.
The database is SQL Server 2005 Developer Edition.
If I use DRIVER={SQL Server}, i.e., use SQLSRV32, everything gets converted properly.
If I use DRIVER={SQL Native Client}, i.e., use SQLCNLI, I apparently get garbage. This is true for ntext, nchar and nvarchar. I also have problems with xml, but I haven't gotten far enough to isolate what's going on with it.
Hi
i am try to execute a command " SELECT * FROM [SQLSERVER].[DATABASENAME].[DBO].[TABLE] ".. but i am receiving a error message
Msg 7319, Level 16, State 1, Line 19
The OLE DB provider "SQLNCLI" for linked server "SQLSERVER" returned a "NON-CLUSTERED and NOT INTEGRATED" index "MSmerge_index_1348915877" with the incorrect bookmark ordinal 0.
but when i try to check the linked server it's shows me the linked is okay.. The following command i use to check wethare the link is fine or not..
CREATE TABLE #foo
(
pingResult SYSNAME NULL
);
INSERT #foo
EXEC master..xp_cmdshell
'ping SQLSERVER;
IF EXISTS
(
SELECT 1
FROM #foo
WHERE pingResult LIKE '%TTL%'
)
BEGIN
PRINT 'Feel free to use linked server.';
END
ELSE
BEGIN
PRINT 'Linked server not available.';
END
DROP TABLE #foo;
and Following result i receive..
(13 row(s) affected)
Feel free to use linked server.
Can any One tells me where i m making mistake or how can i resolve this problem
Ok here is a run down of the situation:
I'm running Server 'A' and Server 'B' which are both on SQL 2005 SP2. Server B connects to Server A using the linked server functionality via the SQLNCLI provider. I am issuing an update statement from a web api in a nested transaction that uses a distrubted transaction.
However, I am receiving the following error :
Unable to start a nested transaction for OLE DB provider "SQLNCLI" for linked server "A". A nested transaction was required because the XACT_ABORT option was set to OFF.
OLE DB provider "SQLNCLI" for linked server "A" returned message "Cannot start more transactions on this session.".
I've researched the issue and understand how XACT_ABORT works.
Also, I looked at the Linked Server provider options for SQLNCLI and came accross the Nested Queries option being unchecked. I checked the option and applied it to the Linked Server.
Okay, so after my long post my questions are: Do i need to restart SQL in order for this to take effect? If not, what do i need to do? I 've restarted IIS to no avail .
I find this most perplexing.
I have two servers, DEV and PROD. Now my DEV server works just great, I can connect to the linked server, query, etc... all is well.
So I'm setting up my PROD server and when I go to add the linked server I get:
Cannot initialize the data source object of OLE DB provider "SQLNCLI".... and Unable to complete login process due to delay in opening server connection.
Now I am running SQL Server 2005 and connecting to an SQL 2000 server.
The odd part is that this works just fine on DEV.
When I go to create the linked server I set:
Linked Server: "LinkedServerName"
Server Type: "SQL Server"
and that's it.
I go to Security and enter my DOMAINUSER.ACCOUNT and then enter the login creds for the linked server.
When I click "OK" I get the above mentioned error code.
Any thoughts?
I just installed a SQL Server 2005 Express SP2 instance on a server with an existing SQL Server 2000 SP3 installation. (I need SQL Server 2005's INSERT from an EXEC capability). It's working great now except for one thing: I can't link any other SQL servers! I've already successfully added and queried a linked Oracle server, but attempting to add a linked SQL server gives me the following error, no matter which SQL provider I try to use:
Code Snippet
"The linked server has been created but failed a connection test. Do you want to keep the linked server?"
Additional information:
--> An exception occured while executing a Transact-SQL statement or batch (Microsoft.SqlServer.Express.ConnectionInfo)
--> Cannot create an instance of OLE DB provider "SQLNCLI" for linked server "SERVERNAME". (Microsoft SQL Server, Error: 7302)
The technical details reveal the error source as "sp_testlinkedserver".
I've scoured the net and premier support for advice on this problem, but the little I found wasn't helpful. I've tried reinstalling the SQL Native Client, but it didn't help. I've tried uninstalling SQL Server 2005 Express completely (including management studio and native client), rebooting, and reinstalling everything, with no luck. The server (obviously) does not have a firewall enabled. I've tried stopping the SQL 2000 Server installed on the system, no help. If I create a test .UDL file on the system, pointing to any of the SQL servers I'm trying to link, clicking the "Test Connection" button returns successful. I'm also able to connect to and query the servers directly from the SQL 2005 Express Management Studio. I just can't add them as linked servers.
The server is running Windows 2003 SP1, SQL Server 2000 SP3, and SQL Server 2005 Express SP2 (the default "SQLExpress" named instance). I've tried setting up SQL 2005 Express to run under the network service account and under a domain account used by the other SQL 2000 servers.
From other SQL 2000 servers, I can connect and link to the SQL Server 2005 Express instance successfully. I can also successfully add linked SQL servers in SQL Server 2000 instance installed on the same server. Only adding linked SQL servers in 2005 Express seems to be broken.
Anyone have any other suggestions? I'm totally baffled. Thank you so much for any helpful advice.
Hi all--I'm trying to convert a function which I inherited from a SQL Server 2000 DTS package to something usable in an SSIS package in SQL Server 2005. Given the original code here:
Function Main()
on error resume next
dim cn, i, rs, sSQL
Set cn = CreateObject("ADODB.Connection")
cn.Open "Provider=sqloledb;Server=<server_name>;Database=<db_name>;User ID=<sysadmin_user>;Password=<password>"
set rs = CreateObject("ADODB.Recordset")
set rs = DTSGlobalVariables("SQLstring").value
for i = 1 to rs.RecordCount
sSQL = rs.Fields(0).value
cn.Execute sSQL, , 128 'adExecuteNoRecords option for faster execution
rs.MoveNext
Next
Main = DTSTaskExecResult_Success
End Function
This code was originally programmed in the SQL Server ActiveX Task type in a DTS package designed to take an open-ended number of SQL statements generated by another task as input, then execute each SQL statement sequentially. Upon this code's success, move on to the next step. (Of course, there was no additional documentation with this code. :-)
Based on other postings, I attempted to push this code into a Visual Studio BI 2005 Script Task with the following change:
public Sub Main()
...
Dts.TaskResult = Dts.Results.Success
End Class
I get the following error when I attempt to compile this:
Error 30209: Option Strict On requires all variable declarations to have an 'As' clause.
I am new to Visual Basic, so I'm on a learning curve here. From what I know of this script:
- The variables here violate the new Option Strict On requirement in VS 2005 to declare what type of object your variable is supposed to use.
- I need to explicitly declare each object, unless I turn off the Option Strict On (which didn't seem recommended, based on what I read).
Given this statement:
dim cn, i, rs, sSQL
I'm looking at "i" as type Integer; rs and sSQL are open-ended arrays, but can't quite figure out how to read the code here:
Set cn = CreateObject("ADODB.Connection")
cn.Open "Provider=sqloledb;Server=<server_name>;Database=<db_name>;User ID=<sysadmin_user>;Password=<password>"
set rs = CreateObject("ADODB.Recordset")
This code seems to create an instance of a COM component, then pass provider information and create the recordset being passed in by the previous task, but am not sure whether this syntax is correct for VS 2005 or what data type declaration to make here. Any ideas/help on how to rewrite this code would be greatly appreciated!
Dear Friends,
I am having 2 Tables.
Table 1: AddressBook
Fields --> User Name, Address, CountryCode
Table 2: Country
Fields --> Country Code, Country Name
Step 1 : I have created a Cube with these two tables using SSAS.
Step 2 : I have created a report in SSRS showing Address list.
The Column in the report are User Name, Address, Country Name
But I have no idea, how to convert this Country Code to Country name.
I am generating the report using the Layout tab. ( Data | Layout | Preview ) Report1.rdl [Design]
Anyone help me to solve this issue. Because, in our project most of the transaction tables have Code and Code description in master table. I need to convert all code into corresponding description in all my reports.
Thanks in advance.
Regards
Ramakrishnan
Singapore
28 March 2007
Hello,
I'm using ASP.Net to update a table which include a lot of fields may be around 30 fields, I used stored procedure to update these fields. Unfortunatily I had to use a FormView to handle some TextBoxes and RadioButtonLists which are about 30 web controls.
I 've built and tested my stored procedure, and it worked successfully thru the SQL Builder.The problem I faced that I have to define the variable in the stored procedure and define it again the code behind againALTER PROCEDURE dbo.UpdateItems
(
@eName nvarchar, @ePRN nvarchar, @cID nvarchar, @eCC nvarchar,@sDate nvarchar,@eLOC nvarchar, @eTEL nvarchar, @ePhone nvarchar,
@eMobile nvarchar, @q1 bit, @inMDDmn nvarchar, @inMDDyr nvarchar, @inMDDRetIns nvarchar,
@outMDDmn nvarchar, @outMDDyr nvarchar, @outMDDRetIns nvarchar, @insNo nvarchar,@q2 bit, @qper2 nvarchar, @qplc2 nvarchar, @q3 bit, @qper3 nvarchar, @qplc3 nvarchar,
@q4 bit, @qper4 nvarchar, @pic1 nvarchar, @pic2 nvarchar, @pic3 nvarchar, @esigdt nvarchar, @CCHName nvarchar, @CCHTitle nvarchar, @CCHsigdt nvarchar, @username nvarchar,
@levent nvarchar, @eventdate nvarchar, @eventtime nvarchar
)
AS
UPDATE iTrnsSET eName = @eName, cID = @cID, eCC = @eCC, sDate = @sDate, eLOC = @eLOC, eTel = @eTEL, ePhone = @ePhone, eMobile = @eMobile,
q1 = @q1, inMDDmn = @inMDDmn, inMDDyr = @inMDDyr, inMDDRetIns = @inMDDRetIns, outMDDmn = @outMDDmn,
outMDDyr = @outMDDyr, outMDDRetIns = @outMDDRetIns, insNo = @insNo, q2 = @q2, qper2 = @qper2, qplc2 = @qplc2, q3 = @q3, qper3 = @qper3,
qplc3 = @qplc3, q4 = @q4, qper4 = @qper4, pic1 = @pic1, pic2 = @pic2, pic3 = @pic3, esigdt = @esigdt, CCHName = @CCHName,
CCHTitle = @CCHTitle, CCHsigdt = @CCHsigdt, username = @username, levent = @levent, eventdate = @eventdate, eventtime = @eventtime
WHERE (ePRN = @ePRN)
and the code behind which i have to write will be something like thiscmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.AddWithValue("@eName", ((TextBox)FormView1.FindControl("TextBox1")).Text);cmd.Parameters.AddWithValue("@ePRN", ((TextBox)FormView1.FindControl("TextBox2")).Text);
cmd.Parameters.AddWithValue("@cID", ((TextBox)FormView1.FindControl("TextBox3")).Text);cmd.Parameters.AddWithValue("@eCC", ((TextBox)FormView1.FindControl("TextBox4")).Text);
((TextBox)FormView1.FindControl("TextBox7")).Text = ((TextBox)FormView1.FindControl("TextBox7")).Text + ((TextBox)FormView1.FindControl("TextBox6")).Text + ((TextBox)FormView1.FindControl("TextBox5")).Text;cmd.Parameters.AddWithValue("@sDate", ((TextBox)FormView1.FindControl("TextBox7")).Text);
cmd.Parameters.AddWithValue("@eLOC", ((TextBox)FormView1.FindControl("TextBox8")).Text);cmd.Parameters.AddWithValue("@eTel", ((TextBox)FormView1.FindControl("TextBox9")).Text);
cmd.Parameters.AddWithValue("@ePhone", ((TextBox)FormView1.FindControl("TextBox10")).Text);
cmd.Parameters.AddWithValue("@eMobile", ((TextBox)FormView1.FindControl("TextBox11")).Text);
So is there any way to do it better than this way ??
Thank you
Hi all,
Could someone tell me if custom code function can capture the event caused by a user? For example, onclick event on the rendered report?
Also, can custom code function alter the parameters of the report, or refresh the report?
Thanks.