I'm looking for Ideas on how to handle a Pldege Reminder process. For example; a pledge is made to pay $2400 over the next two years. They will pay $100 per month and each month a reminder will be sent. No real mistery if there is a balance you send a reminder. My problem is how to handle things like what if they want to pay quarterly or annually and how to determine if a payment is really due based on when they paid last, etc... You most likely see what I mean.
If anyone has done this in the past and/or has any ideas and is willing to share I would greatly appreciate any help.
I was trying to extract data from the source server using OLEDB Source and SQL Server Destination when i encountered this error:
"Transaction (Process ID 135) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".
What must be done so that even if the table being queried is locked, i wouldn't experience any deadlock?
Hello all, I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.
So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with
FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation. and it also logs FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).
I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone. As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.
Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.
Dear list Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server
What Im trying to do is convert this cmd that works into an execute process task D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log the above dos cmd works 100%
However when I use the Execute Process Task I get this error [Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".
There are two package varaibles User::gsPreplogInput = ex.log User::gsPreplogOutput = out.log
How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".
Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".
The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
The customer.bat file will have the following code: tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"
the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.
The Problem: The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
I'm pulling data from Oracle db and load into MS-SQL 2008.For my data type checks during the data load process, what are options to ensure that the data being processed wouldn't fail. such that I can verify first in-hand with the target type of data and then if its valid format load it into destination table else mark it with error flag and push into errors table... All this at the row level.One way I can think of is to load into a staging table then get the source & destination table -column data types, compare them and proceed.
should I just try loading the data directly and if it fails try trouble shooting(which could be a difficult task as I wouldn't know what caused error...)
I am having this table locking issue that I need to start paying attention to as its getting more frequent.
The problem is that the data in the tables is live finance data that needs to be changed and viewed almost real time so what I have picked up so far is that using 'table Hints' may not be a good idea.
I have a guy at work telling me that introducing a data access layer is the only way to solve this, I am not convinced but havnt enough knowledge to back my own feeling up. (asp system not .net).
Hi, I'm trying to upload the ASPNETDB.MDF file to a hosting server via FTP, and everytime when it was uploaded half way(40% or 50%) I would get an error message saying: "550 ASPNETDB.MDF: The process cannot access the file because it is being used by another process" and then the upload failed. I'm using SQL Express. Does anybody know what's the cause? Thanks a lot
Hi. When I try to start a package manually clicking the Start Debugging button I get this after a little while:
Cannot process request because the process (3880) has exited. (Microsoft.DataTransformationServices.VsIntegration)
How can I prevent this from happening? This happens every time I want to start the package and every time the process id is different. Here it is 3880.
I need for a database to give my users and indication that a renewal has been complete. Basically what happens is every year once a month a report is generated from sql of how many employees need their gaming license renewed the filter is based off of a field called final suit. I need to find a way to let them know through the database that an employee has been renewed. anyone got any ideas??
Hi all I am fishing for ideas on the following scenario and hope someone can point me in the best direction.
I create a new table and insert data from relevant other tables but i want to set the data in the new table colums to set widths that have leading zeros where applicable. I.E the new table column is varchar (10) the data going in to the column is coming from another table where the size was varchar (8) but the data was only 2 characters in size so i want to pad it out to the full new varchar (10) with leading zeros if that makes sence.
I am really just trying to get some ideas on the best possible way to do this thanks.
I have a table with 18,000 records with beg_eff_date since the year 2005. I need to separate the entries based on their daily activity. For example if Beg_eff_date 01/0/2005 then day is "1" if Beg_eff_date is 01/27/2005 then the day is "27". Repeating the same process until I reach "NOW" present time. Any ideas of how can I do this?
Thank You for all your previous help and the current one!!
I created a Temp Table that hold a collection of records by date.
I need to do create calculation that give me the Total fuel used per day:
c.rcpt_nom_vol -c.rcpt_fuel- c.rcpt_act_vol = Total Fuel used per day. Then pull the result of this calculation and assign the result to the specific day of the month. For example is the Calculation Result is 4.25 on Feb 12, 2007. Then the record is insert into a Temp Table as 4.25 day #12.
Does anyone has an idea of how to do this? Thanks and Let me know!!!!
SELECT Distinct a.contract_nbr, a.contract_sub_type, a.contract_type_code,a.current_expirtn_date, b.nom_id, b.nom_rev_nbr, c.beg_eff_date, c.rcpt_dlvry_ind, c.rcpt_nom_vol, c.rcpt_fuel,c.rcpt_act_vol from TIES_Gathering.dbo.contract a Inner Join TIES_Gathering.dbo.NOm b on a.contract_nbr = b.contract_nbr Inner Join TIES_Gathering.dbo.Nom_vol_detail c on c.Nom_id = b.Nom_id where (a.contract_sub_type = 'INT') and (a.Contract_type_code ='GTH') and (DATEADD(mm, DATEDIFF(mm,0,getdate()), 0) < a.current_expirtn_date) and (c.rcpt_dlvry_ind ='R')
We've got currenlty around 500 dts 2000 in production.
In order to know in what ETL processes we have Oracle connections, or FTP tasks or whatever, we did a VB6 app using dtspkg.dll which load all the properties for each DTS into Sql server tables. So that, then you could see from a specific DTS how many connections, Sql Tasks it had and so on..
How to accomplish the same with SSIS? I know, doing the same but using .Net, of course, but is there any else approximation? I am little bit concerned when we will have hundreds of them up.
Maybe 2005 is offering this feature automatically, I don't know.
Am working on an SSIS project and I am not sure how to handle this situation. I have four tables in two completely separate networks {AB} {CD} and I want to populate one of the tables D based on the information from tables A and C with the following scenario I get data from from table A make a lookup transformation to check what did has changed if the data has changed or if there is a new entry in table A get the identity key from table C {they both share a common field} and add the identity key as part of my data inserted in table D
A ----lookup <
data that has changed --- get the identity key from C ---- insert data from table A + identity key into D
I have some performance issues which I can not explain; The database it is running on on a dedicated SQL server box with 8 cpu€™s 4 GB memory. Users are connecting with a fat client.
There is hardly on users using it but they are getting long delays. So I kicked of a profiler trace and sp_blocker. I noticed some queries taking over 30 sec to complete in profiler but when I run them in query analyzer they run in under a second.
I check the output from the blocker and there was no blocking over that time period and it was the only processes actually running.
How can it be so slow I have run out of ideas please any ideas would be welcome
I'm new to asp.net. Please help me with some ideas about the design of databases and interface of the web site. We are a public school district, I want to create a website for families to go on line to update their family and student's demographic information. Basically I put the students' infomation pulled from our student information system software on the web, the parents can log in on line to update it at the beginning of school year. After that, I will create some report and let secretary manually do the update to our student information system. The demographic infor includes 3 parts, 1. family street address, city, state, zip2 guardian1 primary phones,second phone, emails. primary phones,second phone3, student date birth, gender. may have multiple students in one family But how can I track which field parents changed, shall I do it in programming in the web form, or later when I create some kind of reports. For I only want to pull students with the fields that updated and give them to secretary to update manully, and I don't want to generate a full report and let them compare which field is changed and then update, it will take them too much time. Thanks much in advance
I've read thru all the threads here which say basically the same thing, use a drop table & then a create table to clear the spreadsheet. My problem is the process works the first time to create the table in a new Excel file but fails to clear excel after that. The processes drop, create, & pump data all work without fail but the spreadsheet data is appended to. I've used the wizard as well, saved the package and ran it again without success. Anyone ran into this one?
I have tried to make my basic audit log do more, but i haven't gotten very far;
In my basic audit log, i record this information:
table type of change field modified old value new value db user date/time
This audit records everything, which is great, but it cannot relate information when i go back to analyze the changes; for example, when a "directory" record is added, a user's information may be entered into several different tables, such as:
name (different table) addresses (different table) phone numbers (different table)
If one wanted to look up the changes to addresses of a person in the directory based on the person's name, i could not do it with my existing audit log because the addresses would be in a different table than the name table and there is no relating data in the audit log to relate the address changes to a persons name;
What might be a solution? I have tried a few approaches and am at a loss;
it is working but takes about 3-4 seconds per exec.
CREATE PROCEDURE isp_ap_calc_apt_totals @p_comp char(2), @p_vend char(6), @p_asofdatechar(8) as
if (@p_asofdate <= '00000000') begin set @p_asofdate = '99999999' end
delete from XAPAPTTOT where xapt_comp = @p_comp and xapt_vend = @p_vend and xapt_asof_date = @p_asofdate
insert into XAPAPTTOT select apph_comp, apph_vend, apph_type, apph_id, @p_asofdate, sum(apph_paymnts), sum(apph_discts), sum(apph_adjts), count(apph_paymnts), sum(apph_paymnts)+ sum(apph_discts) + sum(apph_adjts) + b.apt_gross, 0, max(str(yy,4) + replace(str(mm,2),' ','0') + replace(str(dd,2),' ','0')) from APPHISTF.a join APTRANF.b on b.apt_comp = a.apph_comp and b.apt_vend = a.apph_vend and b.apt_type = a.apph_type and b.apt_id = a.apph_id where ((a.apph_comp = @p_comp) and (a.apph_vend = @p_vend) and (a.apph_unpost_dt = 0) and (str(a.yy,4) + replace(str(a.mm,2),' ','0') + replace(str(a.dd,2),' ','0') <= @p_asofdate)) or ((a.apph_unpost_dt > 0 and a.apph_unpost_dt <= @p_asofdate and b.apt_unposted_fg = 1 and b.apt_comp = @p_comp and b.apt_vend = @p_vend and b.apt_type = a.apph_type and b.apt_id = a.apph_id)) or (((str(a.yy,4) + replace(str(a.mm,2),' ','0') + replace(str(a.dd,2),' ','0') <= @p_asofdate) and a.apph_unpost_dt > @p_asofdate and b.apt_comp = @p_comp and b.apt_vend = @p_vend and b.apt_type = a.apph_type and b.apt_id = a.apph_id)) group by apph_comp, apph_vend, apph_type, apph_id
update XAPAPTTOT set xapt_last_payck = (select max(apph_payck) from APPHISTF where apph_comp = xapt_comp and apph_vend = xapt_vend and apph_type = xapt_type and apph_id = xapt_id and str(yy,4) + replace(str(mm,2),' ','0') + replace(str(dd,2),' ','0') = xapt_last_paydt ) where xapt_comp = @p_comp and xapt_vend = @p_vend and xapt_asof_date = @p_asofdate GO
To Whom It Concerns - MS Product Design - SQL Server Reporting Services:
I've been working with an ASP.NET web based project utilizing SQL Server Reporting Services for a while and have some things that I think need to be addressed in the next version:
1) I finally got security working utilizing the form based authentication of my Web based app and passing that to SSRS through the ReportViewer control. Not that it was easy. From what I see, a lot of people are having problems with this and so I didn't feel like I was alone. That said, instructions on how to do it need to be easier. Ultimately, it would be better if on the ReportViewer control, you could add properties as follows:
* Impersonate SSRS User
* Impersonization Password 2) Maybe I'm missing something, but in the web app the system logs in to different production databases based on the user id. The only way that I can figure out how to make the same reports available to each database (all on the same SQL Server DB) is to copy the reports and change the data source in the copied directory to copy to the new DB in SQL Server. Could ReportViewer contain a property that allows you to override the connection sring? 3) You have the ability to create PDF's. This is a very nice feature. However, I would like to extend the capabilities that you have. I want to be able to embed a PDF inside the report and have it generated in-line with the report. As an example, I have meta data concerning the PDF kept in the database. When the report prints, I want the meta data printed and the full PDF referenced by the meta data to print. I actually posted a message concerning this to find that there is no solution - I've seen that many people have looked at the message indicating that they are interested in the same feature. 4) It would be nice to have additional controls available - panel, calendar , checkbox, checkboxlist, radiobutton, radiobuttonlist and hyperlink in particular. 5) Dashboard widgets that we can use. Your promoting SSRS as a way to build data decision front ends. It would be nice if out of the box SSRS included several widgets that we could use as indicators to metrics being tracked by the system. As it stands, I can do simple bar, line and pie charts and that is about it. No progress bar, no guages. It would be nice to have some sexier graphing components. All in all, I do like the product. It was a pain to get setup due to the authentication issues, but I do like it. David L. Collison Any day above ground is a good day!
Hi, I want to write a sproc whose main table is Order and it inner joins another table called OrderShipTo with a one to many relationship so the way i have written the first query is as follows SELECT o.OrderId, o.OrderDate, o.PlanId, o.CreatedByUserId, o.Quantity, o.BillToCompany, o.BillToContact, o.BillToAddress, o.BillToCity, o.BillToState, o.BillToZip, o.BillToEmail, o.BillToPhone, o.ShipToIsBillTo, o.BookTypeId, o.RequiredDeliveryDate, o.SpecialInstructions, o.ApprovedBy, o.ApprovedByPhone, o.ApprovedByEmail, os.ShipToId, os.ShipTypeId, os.ShipToCompany, os.ShipToContact, os.ShipToAddress, os.ShipToAddress1, os.ShipToCity, os.ShipToState, os.ShipToZip, os.ShipToEmail, os.ShipToPhone, os.Quantity FROM [Order] o Inner Join OrderShipTo os on o.OrderId = os.OrderId WHERE o.OrderId = @OrderId So suppose if i give an OrderId of 15 In the OrderShipTo table they may be 3 Or 2 or none entries for this order in the Ordership to Table So if there is 3 entries in the OrderShip i will get 3 rows of data which is correct... But i just want o.Columns to appear once and i want n rows for the os.Columns to appear. So in Order To acheive i wrote this query DECLARE @OrderId int SET @OrderId = 311 SELECT o.OrderId, o.OrderDate, o.PlanId, o.CreatedByUserId, o.Quantity, o.BillToCompany, o.BillToContact, o.BillToAddress, o.BillToCity, o.BillToState, o.BillToZip, o.BillToEmail, o.BillToPhone, o.ShipToIsBillTo, o.BookTypeId, o.RequiredDeliveryDate, o.SpecialInstructions, o.ApprovedBy, o.ApprovedByPhone, o.ApprovedByEmail FROM [Order] o WHERE o.OrderId = @OrderId EXEC usp_OrderShipToLoadByOrderId @OrderId
But at the end i want all the rows o.Columns + the rows from os.columns... I also tried giving a union of both the tables but that didnt work of type mismatch.. How can i acheive that??? Regards Karen
Up until recently one of our SQL 7 databases has been running quite happily. However over the last 2 weeks the users have started to complain about performance levles, operations that would normally take 2-3 seconds now run for about 40 seconds. I have rebuilt all indexes and even ran update statistics althought both the 'Auto create Statistics' and 'Auto update statistics' are turned on. This failed to help so I ended up stopping and starting SQL server but still no luck.
I have run a DBCC SHOWCONTIG and the fragmentation is well within acceptable levels, scan desnity is at 94%. The only other thing I can think of is to reboot the NT server as it has been up for 67 days now. Can anyone else think of anything I might have overlooked?
I have about 20 remote databases that I need a query/scheduled task to run that generates a .rpt file. That part I can get.
However, I need to get this file to another company (via email or ftp, etc) and make it automated.
For example:
Scheduled task runs twice a month and generates a file that then needs to be emailed to an individual or ftp'd to a ftpsite. Is there a way to do this in SQL 7.0 (or 6.5)?
I need to do a stored proc in sql server 2005 where I have to count the total work orders based on their wo_type + wo_status, i.e. open, compltd, incomplete. For example I may have (wo_types) AB, AC, AD, orders that are in open status. I need to count the total AB_Type, AC_Type, AD_Type then the total of all 3 in another column (as Total Open). I must do this for all wo_status.
I also have to allow the user to be able to enter the date they want. I.e. if they would want to know on 3/17/08 how many orders were opened that day only. I know I have to use a parameter for this but how do i do that?
Should I do separate select statments for each status, multiple tables ?
Also for 'open' wo_status the wo_status_code can change from O to S but it is still considered 'open'. For this wo_status how can I get the most recent status_code for the open order, i.e., I want to count a particular 'open'work order's - most recent status_code in the work order count for a given wo_type -->> the order should only be counted once on any given date entered. So if the status changed from O then S the same at 1pm then 2pm, respectively, then only the 2pm status should be counted. Thanks in advance for your assistance.
This is a tuffie, but I think I'll learn new techniques in SQL.I wish to put data from MS Active Directory and put it into a table.Specificly I want user information (first name, last name and so forth)and the groups that they belong into a SQL table.LDIFDE is a utility that can create a csv file from an AD server. Thisis a sample output:dn: CN=rob camarda,OU=Corporate,OU=GeographicLocations,DC=strayer,DC=educhangetype: addobjectClass: topobjectClass: personobjectClass: organizationalPersonobjectClass: usercn: rob camardagivenName: robmemberOf: CN=Arlington Admin,OU=Campus Domain Admin,DC=strayer,DC=edumemberOf:CN=Arlington,OU=Arlington,OU=Region2,OU=Geographic Locations,DC=strayer,DC=edumemberOf: CN=RN Report Consumers,OU=Cognos ReportNet,DC=strayer,DC=edusAMAccountName: rob.camardadn: CN=Robert A. Camarda,OU=TechnologyGroup,DC=strayer,DC=educhangetype: addobjectClass: topobjectClass: personobjectClass: organizationalPersonobjectClass: usercn: Robert A. CamardagivenName: RobertmemberOf: CN=Role Regional Director,OU=Roles,DC=strayer,DC=edumemberOf: CN=Role Campus Director,OU=Roles,DC=strayer,DC=edumemberOf: CN=TLSAdmin,OU=Talisma-Users,DC=strayer,DC=edumemberOf: CN=ASPTestReports,OU=Roles,DC=strayer,DC=edumemberOf: CN=IT Report Authors,OU=Roles,DC=strayer,DC=edumemberOf: CN=Developers,OU=TechnologyGroup,DC=strayer,DC=edu memberOf: CN=SQL Backup Admin,OU=TechnologyGroup,DC=strayer,DC=edumemberOf: CN=RN Report MetaData Modelers,OU=CognosReportNet,DC=strayer,DC=edumemberOf:CN=RN Corporate,OU=Corporate,OU=Region2,OU=GeographicLocations,DC=strayer,DC=edumemberOf:CN=Arlington,OU=Arlington,OU=Region2,OU=Geographic Locations,DC=strayer,DC=edumemberOf: CN=RN Administrator System,OU=CognosReportNet,DC=strayer,DC=edumemberOf: CN=RN Administrator Server,OU=CognosReportNet,DC=strayer,DC=edumemberOf: CN=RN Report Authors,OU=Cognos ReportNet,DC=strayer,DC=edumemberOf: CN=Backup Operators,CN=Builtin,DC=strayer,DC=edumemberOf: CN=Domain Admins,CN=Users,DC=strayer,DC=edumemberOf: CN=Administrators,CN=Builtin,DC=strayer,DC=edusAMAccountName: robert.camardaIn this output, each user is separated by a blank line. sAMAccountNameis the user's login ID to ADS. Lines starting with memberOf: shows thepath for each group the user belongs.My thought is to load the text data into a SQL table with the PK beingthe line number. This way the data will stay together. The secondcolumn would be just text, varchar(100).I'd like to end up with a table something likeUSER_ID, GROUP_MEMBERSHIP, GIVENNAMEIn the example of robert.camarda, that user belongs to 7 groups, sothere would be 7 records, one for each group. I think once I have thispart, I can build my final table with PK's an all the good-housekeeping of a SQL Table.Now the part that I have no idea how to solve:How do I convert the data from unfriendly for databases, to something Ican use?1. I know I have a new user when I find dn:2. I know I am done with the user when I get a blank (null) line.3. I know what I want to populate rows with name and the contents onceI find rows starting with memberOf:4. It appears there is a max line length that LDIFDE will export, andstarts a new line. So, it will be necessary to join lines.I would think this is a combo of CURSORS, a do/while loop and otherassorted magic.If someone can help me get started, I would have something to reseachor model from. As of now, im staring and a blank page and not sure howto start. Maybe someone knows of a simular problem that can share theSQL.TIARob
I would like to write a user defined function that takes as an input a varchar and returns an xml. If the string is valid xml the function would just return it. If the string is not valid xml then the function would encode the value before returning it.
The function would look something like this:
Code Snippet
CREATE FUNCTION dbo.EncodeXMLIfNotValid (
@InputString varchar(max)
)
RETURNS xml
AS
BEGIN
DECLARE @xml xml
BEGIN TRY
SET @xml = CAST(@InputString as xml)
END TRY
BEGIN CATCH
SET @xml = '<![CDATA[' + @InputString + '>]]>'
END CATCH
RETURN( @xml )
END
However, after writting this I figured out that using BEGIN TRY and CATCH is not allowed in a UDF.
Any thoughts or ideas how I could write a function with this behavior?
I have a table containing a list of source table names to be transferred to destination.I need to pass each and every table name as a variable and based on the name of the variable I need to select data from source and insert into destination.The source and destinations are on 2 different servers.The source tables have different metadata (different column names and data types).Any help how to implement this would be greatly appreciated.
To be more clear I have List table which has below format
TABLE NAME CUSTOMER PRODUCT INVENTORY
Customer , product, inventory are tables names. So my package should first go and collect the table name from LIST table and then transfer the Customer table data from Server A to Server B. This should be repeat untill all the tables listed in LIST table are transferred.
I am trying to insert a value into a field in a database named ASPNETDB.MDF. The table name is "profiles_BasicProperties" and the field name is "UserID". I get an error when I attempt to do this. See the code I am using to try to do this below...and then the error that I get which is further down in this post. Note...both the code and the database are on my laptop. I can connect to the database just fine using Server Explorer in MS VS 2005. Thanks in advance for any help anybody can offer... Here is the code I am using: <%@ Page Language="VB" MasterPageFile="~/Master02.master" Title="Create Your Free Account" Debug="true"%><%@ Import Namespace="System.Data.SqlClient" %><%@ Import Namespace="System.Web.Configuration" %> <asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder_Main" Runat="Server"> <script runat="server"> Sub CreateUserWizard_CreatedUser(ByVal sender As Object, ByVal e As EventArgs) Dim CWZ As CreateUserWizard CWZ = CType(Me.LoginView1.FindControl("CreateUserWizard"), Wizard) CreateUserProfile(CWZ.UserName) Private Sub CreateUserProfile(ByVal UserName As String) Dim conString As String = WebConfigurationManager.ConnectionStrings("Main").ConnectionString Dim con As New SqlConnection(conString) Dim cmd As New SqlCommand("INSERT profiles_BasicProperties (UserName) VALUES (@UserID)", con) cmd.Parameters.AddWithValue("@UserID", UserName) Using con con.Open() cmd.ExecuteNonQuery() End Using End Sub </script> ...and here is the error and stack trace (the offending Line 49 is in bold): Server Error in '/Site_Dev' Application.-------------------------------------------------------------------------------- An attempt to attach an auto-named database for file ~App_DataASPNETDB.MDF failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An attempt to attach an auto-named database for file ~App_DataASPNETDB.MDF failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share. Source Error: Line 47: cmd.Parameters.AddWithValue("@UserID", UserName)Line 48: Using conLine 49: con.Open()Line 50: cmd.ExecuteNonQuery()Line 51: End Using Source File: C:UsersmdcraggDocumentsWebsiteSite_DevUser_Create.aspx Line: 49 Stack Trace: [SqlException (0x80131904): An attempt to attach an auto-named database for file ~App_DataASPNETDB.MDF failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +736211 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1959 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +237 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +374 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +192 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 ASP.user_create_aspx.CreateUserProfile(String UserName) in C:UsersMatthewDocumentsGroup 02 - PoliticoreSite_DevUser_Create.aspx:49 ASP.user_create_aspx.CreateUserWizard_CreatedUser(Object sender, EventArgs e) in C:UsersMatthewDocumentsGroup 02 - PoliticoreSite_DevUser_Create.aspx:30 System.Web.UI.WebControls.CreateUserWizard.OnCreatedUser(EventArgs e) +105 System.Web.UI.WebControls.CreateUserWizard.AttemptCreateUser() +341 System.Web.UI.WebControls.CreateUserWizard.OnNextButtonClick(WizardNavigationEventArgs e) +105 System.Web.UI.WebControls.Wizard.OnBubbleEvent(Object source, EventArgs e) +453 System.Web.UI.WebControls.CreateUserWizard.OnBubbleEvent(Object source, EventArgs e) +149 System.Web.UI.WebControls.WizardChildTable.OnBubbleEvent(Object source, EventArgs args) +17 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
--------------------------------------------------------------------------------Version Information: Microsoft .NET Framework Version:2.0.50727.312; ASP.NET Version:2.0.50727.312
