Lookup Error How To Figure Out What's Wrong
Mar 19, 2008
I'm new to the SSIS world and am writing my first package. What the package is supposed to do is to take the XML export from one database and import into an identical database (production). There's no connection between the two DBs. During import, the SSIS package checks if there's any primary key values in a table already exist in the production DB and only imports the new records.
So here's the data flow of my package: XML Source -> Lookup -> Conditional Split -> SQL Server Destination. I'm doing a lookup against the same destination DB to check if a record (primary key value) already exists or not, and doing the condition ISNULL(id_out) in the Conditional Split. I really don't know if this is the correct way to implement it. The Lookup control errors out during debugging in Visual Studio. Here's what;s on the progress tab:
[Lookup [1745]] Error: The "component "Lookup" (1745)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (1747)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The ProcessInput method on component "Lookup" (1745) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
How do I get more specific error on what went wrong?
Thanks
Bob
View 3 Replies
ADVERTISEMENT
Oct 27, 2006
Table A, Table B. need to update table A balance field from table b sum of amount
UPDATE CUSTOMERS SET BALANCE=(SELECT SUM(AMOUNT) FROM PAYMENT,CUSTOMERS
WHERE CUSTOMERS.ID=PAYMENT.ID GROUP BY PAYMENT.ID)
Msg 512, Level 16, State 1, Line 25
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
The statement has been terminated.
View 4 Replies
View Related
May 29, 2008
Hello,
I use OPENROWSET to read values from Excel and store them in a SQL Server table. In the Excel file I have a row having format 'Number' with two decimal places.
Example: 1225000.00
When I select this value using SSMS I get the correct value:
1225000
Strange enough, I cannot see the decimals anymore. However, when I now store this value into my table and then select it from there I get: (the datatype in the table is VARCHAR(max))
1.225e+006
I would not care if I could convert this back to a numeric datatype but this seems not to work: CAST('1.225e+006' as INT) throws an exception. Obviously OPENROWSET sends the data strictly as a character string. Storing this into varchar(max) works for small figures but it starts to use exp values for big figures.
Does anybody has an idea how to bring huge Excel based figures safely into a MS SQL Table ?
Thanks: Peter
View 5 Replies
View Related
Sep 26, 2007
I'm working with an existing package that uses the fuzzy lookup transform. The package is currently working; however, I need to add some columns to the lookup columns from the reference table that is being used.
It seems that I am hitting a memory threshold of some sort, as when I add 3 or 4 columns, the package works, but when I add 5 columns, the fuzzy lookup transform fails pre-execute:
Pre-Execute
Taking a snapshot of the reference table
Taking a snapshot of the reference table
Building Fuzzy Match Index
component "Fuzzy Lookup Existing Member" (8351) failed the pre-execute phase and returned error code 0x8007007A.
These errors occur regardless of what columns I am attempting to add to the lookup list.
I have tried setting the MaxMemoryUsage custom property of the transform to 0, and to explicit values that should be much more than enough to hold the fuzzy match index (the reference table is only about 3000 rows, and the entire table is stored in less than 2MB of disk space.
Any ideas on what else could be causing this?
View 4 Replies
View Related
Feb 4, 2008
Hello,
I have a query that returns a daily revenue figure. The query is as follows:
SELECT top 1000
ds.AcctCode,
ds.TxnDate,
SUM(isnull(ds.FuelFee,0)) + SUM(isnull(ds.CashFee,0)) + SUM(isnull(ds.ScFee,0)) AS TotalDailyRevenue,
--"MTD" = ?,
--"YDT" = ?,
ps.TC,
CASE
WHEN ps.Proj = 100 THEN 'New Account'
WHEN ps.Proj = 200 THEN 'Current Account'
END AS ProjStatus,
ps.FSR,
ps.SubmitRep1
FROM
TxnRptg.dbo.tbl_DailySummary ds
INNER JOIN SalesData.dbo.tbl_CYProcessedSales ps
ON ds.AcctCode = ps.Acct
WHERE
MONTH(ds.TxnDate) = 1
AND
Proj IN (100,200)
AND TC = 'HV'
GROUP BY
ds.AcctCode, ds.TxnDate, ps.TC, ps.Proj, ps.FSR, ps.SubmitRep1
ORDER BY
ds.AcctCode, ds.TxnDate
--*********************************
TxnDate represents a single day of the month. How can I include MTD so that the dates for the revenue total are from DATEADD(mm, DATEDIFF(mm,0,getdate()), 0) (beginning of current month) to TxnDate, and YTD so that the revenue totals are from DATEADD(yy, DATEDIFF(yy,0,getdate()), 0) (beginning of the current year) to TxnDate?
Thank you for your help!
cdun2
View 5 Replies
View Related
Jun 8, 2007
Here is my code below. When I attempt to run the data flow task that calls this script, I get this error:
"Index was outside the bounds of the array."
I honestly do not know what the problem is here. There are definitely 6 columns in the file. In fact, even if comment out everything except the first line (myCol1), I still get the "Index was outside the bounds of the array." error.
Any ideas??? Need help.
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Dim rowValues As String()
rowValues = Row.Line.Split(columnDelimiter) 'parse row by comma
If Row.Line Like "*OPENING BALANCE*" Then
Row.AccountNumber = Nothing 'set to null for conditional split
Row.OpeningBalance = CDec(rowValues(3)) 'get the 4th value
ElseIf Row.Line Like "*CLOSING BALANCE*" Then
Row.AccountNumber = Nothing 'set to null for conditional split
Row.ClosingBalance = CDec(rowValues(2)) 'get the 3rd value
Else
Row.myCol1 = CStr(rowValues(0)).Replace("""", String.Empty)
Row.myCol2 = CStr(rowValues(1)).Replace("""", String.Empty)
Row.myCol3 = CStr(rowValues(2)).Replace("""", String.Empty)
Row.myCol4 = CStr(rowValues(3)).Replace("""", String.Empty)
Row.myCol5 = CStr(rowValues(4)).Replace("""", String.Empty)
Row.myCol6 = CDec(rowValues(5))
End If
End Sub
View 10 Replies
View Related
Oct 16, 2007
Can someone please look at my stored procedure? I am trying to create the following stored procedure, but get the following errormessages:
Msg 102, Level 15, State 1, Procedure InsertWork, Line 3Incorrect syntax near '7'.Msg 102, Level 15, State 1, Procedure InsertWork, Line 25Incorrect syntax near '@7am8am'.
USE [Work]GO
SET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOCREATE PROCEDURE [dbo].[InsertWork]( 7am8am nvarchar(500), 8am9am nvarchar(500), 9am10am nvarchar(500), 10am11am nvarchar(500), 11am12noon nvarchar(500), 12Noon1pm nvarchar(500), 1pm2pm nvarchar(500), 2pm3pm nvarchar(500), 3pm4pm nvarchar(500), 4pm5pm nvarchar(500), 5pm6pm nvarchar(500), 6pm7pm nvarchar(500), 7pm8pm nvarchar(500), 8pm9pm nvarchar(500), 9pm10pm nvarchar(500), 10pm11pm nvarchar(500), Notes nvarchar(500), Date nvarchar(15))AS BEGIN INSERT INTO WorkDay VALUES @7am8am, @8am9am, @9am10am, @10am11am, @11am12Noon, @12Noon1pm, @1pm2pm, @2pm3pm, @3pm4pm, @4pm5pm, @5pm6pm, @6pm7pm, @7pm8pm, @8pm9pm, @9pm10pm, @10pm11pm, @Notes, @DateEND
View 3 Replies
View Related
Mar 30, 2008
I found every several minutes, sometimes one or twice in an hour, I still get a dozen error like below logged in SQL Log. See the error is "You do not have permission to access the service". I found some articles on other errors, but nothing about this error. I want to get more information on this, and a way to trace what is the permission about and which user doesn't have the permission.
Source spid26s
Message
The query notification dialog on conversation handle '{E6FC299F-8BFE-DC11-A4E1-000D5670268E}.' closed due to the following error: '<?xml version="1.0"?><Error xmlns="http://schemas.microsoft.com/SQL/ServiceBroker/Error"><Code>-8494</Code><Description>You do not have permission to access the service 'SqlQueryNotificationService-9ff8b39d-90a8-45bc-83a7-23837920774d'.</Description></Error>'.
thanks
View 7 Replies
View Related
Dec 11, 2004
I am receiving the following error when trying to insert values from textboxes on a registration form:
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: BC30205: End of statement expected.
Source Error:
Line 19: Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(connectionString)
Line 20:
Line 21: Dim queryString As String = "INSERT INTO [UserID_db] ([Code], [UserID], [Password], [Email1], [Name_First], [Name_Last], [Admin_level]) VALUES ('" & txtUserID.Text"', '" & txtUserID.Text"', '" & txtPassword.Text"', '" & txtEmail1.Text"', '" & txtFirstName"', '" & txtLastName.Text"', '" & txtAdminLevel.Text"')"
Line 22: Dim dbCommand As System.Data.IDbCommand = New System.Data.SqlClient.SqlCommand
Line 23: dbCommand.CommandText = queryString
My code is below. Can anyone help me figure out what is wrong with my code?
<%@ Page Language="VB" Debug="true" %>
<%@ Register TagPrefix="wmx" Namespace="Microsoft.Matrix.Framework.Web.UI" Assembly="Microsoft.Matrix.Framework, Version=0.6.0.0, Culture=neutral, PublicKeyToken=6f763c9966660626" %>
<%@ import Namespace="System.Data" %>
<%@ import Namespace="System.Data.OleDb" %>
<script runat="server">
Sub btnSubmit_Click(sender As Object, e As EventArgs)
Dim UCde as string = txtUserID.Text
Dim UserID as string = txtUserID.Text
Dim Password as string = txtPassword.Text
Dim Email1 as string = txtEmail.Text
Dim FirstName as string = txtFirstName.Text
Dim LastName as string = txtLastName.Text
Dim AdminLevel as string = dropAccountType.SelectedItem.Value
Dim connectionString As String = "server='(local)'; trusted_connection=true; database='master'"
Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(connectionString)
Dim queryString As String = "INSERT INTO [UserID_db] ([Code], [UserID], [Password], [Email1], [Name_First], [Name_Last], [Admin_level]) VALUES ('" & txtUserID.Text"', '" & txtUserID.Text"', '" & txtPassword.Text"', '" & txtEmail1.Text"', '" & txtFirstName"', '" & txtLastName.Text"', '" & txtAdminLevel.Text"')"
Dim dbCommand As System.Data.IDbCommand = New System.Data.SqlClient.SqlCommand
dbCommand.CommandText = queryString
dbCommand.Connection = dbConnection
Dim rowsAffected As Integer = 0
dbConnection.Open()
dbCommand.ExecuteNonQuery()
dbConnection.Close()
End Sub
Thanks for your help.
Chris
View 5 Replies
View Related
Mar 14, 2006
I create an sql string as so, add parameters to it and execute it:
string cmdstr = "INSERT INTO locations(id1, id2, companyname, address, city, province, postalcode, phonenumber, faxnumber, contact, contactemail) VALUES (@id1,@id2,@companyname,@address,@city,@province,@postalcode,@phonenumber,@faxnumber,@contact,@contactemail)";
SqlCommand sqlCmd = GetCommandSQL(cmdstr);
sqlCmd.CommandTimeout = TimeOut;
sqlCmd.Parameters.Add("@id1", SqlDbType.Int).Value = itID;
sqlCmd.Parameters.Add("@id2", SqlDbType.Int).Value = Convert.ToInt32(ddlDPCLocation.SelectedValue);
sqlCmd.Parameters.Add("@companyname", SqlDbType.VarChar).Value = ((TextBox)dvShippingInformation.FindControl("tbCompanyName")).Text;
sqlCmd.Parameters.Add("@address", SqlDbType.VarChar).Value = ((TextBox)dvShippingInformation.FindControl("tbAddress")).Text;
sqlCmd.Parameters.Add("@city", SqlDbType.VarChar).Value = ((TextBox)dvShippingInformation.FindControl("tbCity")).Text;
sqlCmd.Parameters.Add("@province", SqlDbType.VarChar).Value = ((TextBox)dvShippingInformation.FindControl("tbProvince")).Text;
sqlCmd.Parameters.Add("@postalcode", SqlDbType.VarChar).Value = ((TextBox)dvShippingInformation.FindControl("tbPostalCode")).Text;
sqlCmd.Parameters.Add("@phonenumber", SqlDbType.VarChar).Value = ((TextBox)dvShippingInformation.FindControl("tbPhoneNumber")).Text;
sqlCmd.Parameters.Add("@faxnumber", SqlDbType.VarChar).Value = ((TextBox)dvShippingInformation.FindControl("tbFaxNumber")).Text;
sqlCmd.Parameters.Add("@contact", SqlDbType.VarChar).Value = ((TextBox)dvShippingInformation.FindControl("tbContact")).Text;
sqlCmd.Parameters.Add("@contactemail", SqlDbType.VarChar).Value = ((TextBox)dvShippingInformation.FindControl("tbContactEmail")).Text;
sqlCmd.ExecuteNonQuery();
for testing purposes ive added the max text in each textbox area, so each textbox has 50 characters or so
and i get an error message as follows, when executing the query:
"System.Data.SqlClient.SqlException: String or binary data would be truncated.
The statement has been terminated.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at _default.InsertGKShippingLocation() in c:\Inetpub\wwwroot\cleanapp\default.aspx.cs:line 125
at _default.InsertOrder() in c:\Inetpub\wwwroot\cleanapp\default.aspx.cs:line 93
at _default.InsertandSend() in c:\Inetpub\wwwroot\cleanapp\default.aspx.cs:line 178"
Anybody have any ideas why this is happening
View 1 Replies
View Related
Oct 12, 2007
hi folks,
i have this error when trying to run the package in development mode.
and i can not decipher this non-intuitive message:
Error: 0xC001604D at <package name>: Checkpoint file "" failed during creation due to error 0x80070003 "The system cannot find the path specified.".
please note that i have no checkpoints on package anymore; i had two but i deleted them but this message still appears.
i have searched the web but no luck in finding an answer.
maybe someone would be able to point out my obvious mistake here.
many thanks,
Nicolas
View 1 Replies
View Related
Oct 4, 2007
I am trying to move data from Access to SQL Server 2000 using DTS.
I have an Access Source and SQL Server Desitination, My destination table has a field called tableID that is not in the source. TableID is a Primary Key and an Identity column.
I have Enable Identity Insert checked in the options of the Transform Data Task.
When I execute ythe task, I get the error
"Cannot insert the value NULL into column 'TableID'. Does not allow nulls. Insert Fails.
Does anyone know why this simple task would fail?
Mike
View 6 Replies
View Related
May 16, 2007
hi all,
good day!
i have dataflowtask_a and dataflowtask_b
i also have a send mail task
inside dtf_a i have a very long transformation which has 10 lookup task
each lookup task is configured to have an error output. should every lookup
encountered an error, the error output of the
lookup sends a unique error msg per lookup and is appended to a
string variable errorlst. Should dtf-a encounter an error it sets the variable
@nogo=true.
In the control flow if @nogo=false it proceeds to dtf_b otherwise it proceeds to
sendmail the consolidate error message.
Questions:
1. I only want to have one unique error message sent per lookup. if there are two
lookup error it should send only one message
2. the message should look like this: "error lookup1 : error lookup2 :and so soon"
how can i do this
thanks!
joey
.
View 2 Replies
View Related
Jun 21, 2006
Hi,
I'm using a Lookup object, but it dosn't works. Anybody knows this error?
[Lookup [29018]] Error: Row yielded no match during lookup.
[Lookup [29018]] Error: The "component "Lookup" (29018)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (29020)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The ProcessInput method on component "Lookup" (29018) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0209029.
View 3 Replies
View Related
Dec 6, 2005
select CAST(convert(char(10), convert(varchar(2),datepart(MM, getdate())) + '/1/' + convert(char(4),datepart(yyyy, getdate())), 101)AS datetime),
count(*)
from Participant_Status
--where date_in between (DATEADD(yy, DATEDIFF(yy,0,getdate()), 0)) AND (dateadd(mm, datediff(mm,0,getdate()), 0))
where date_in between (DATEADD(yy, DATEDIFF(yy,0,getdate()), 0)) AND DATEADD(day, -1, DATEADD(month, -1, DATEADD(dd,1-DAY(getdate()), getdate())))
group by CAST(convert(char(10), convert(varchar(2),datepart(MM, getdate())) + '/1/' + convert(char(4),datepart(yyyy, getdate())), 101)AS datetime)
Server: Msg 164, Level 15, State 1, Line 6
GROUP BY expressions must refer to column names that appear in the select list.
View 1 Replies
View Related
Feb 19, 2006
Im trying to insert a record in my sql server 2005 express database.The following function tries that and without an error returns true.However, no data is inserted into the database...Im not sure whether my insert statement is correct: I saw other example with syntax: insert into table values(@value1,@value2)....so not sure about thatAlso, I havent defined the parameter type (eg varchar) but I reckoned that could not make the difference....Here's my code: Function CreateNewUser(ByVal UserName As String, ByVal Password As String, _ ByVal Email As String, ByVal Gender As Integer, _ ByVal FirstName As String, ByVal LastName As String, _ ByVal CellPhone As String, ByVal Street As String, _ ByVal StreetNumber As String, ByVal StreetAddon As String, _ ByVal Zipcode As String, ByVal City As String, _ ByVal Organization As String _ ) As Boolean 'returns true with success, false with failure Dim MyConnection As SqlConnection = GetConnection() Dim bResult As Boolean Dim MyCommand As New SqlCommand("INSERT INTO tblUsers(UserName,Password,Email,Gender,FirstName,LastName,CellPhone,Street,StreetNumber,StreetAddon,Zipcode,City,Organization) VALUES(@UserName,@Password,@Email,@Gender,@FirstName,@LastName,@CellPhone,@Street,@StreetNumber,@StreetAddon,@Zipcode,@City,@Organization)", MyConnection) MyCommand.Parameters.Add(New SqlParameter("@UserName", SqlDbType.NChar, UserName)) MyCommand.Parameters.Add(New SqlParameter("@Password", Password)) MyCommand.Parameters.Add(New SqlParameter("@Email", Email)) MyCommand.Parameters.Add(New SqlParameter("@Gender", Gender)) MyCommand.Parameters.Add(New SqlParameter("@FirstName", FirstName)) MyCommand.Parameters.Add(New SqlParameter("@LastName", LastName)) MyCommand.Parameters.Add(New SqlParameter("@CellPhone", CellPhone)) MyCommand.Parameters.Add(New SqlParameter("@Street", Street)) MyCommand.Parameters.Add(New SqlParameter("@StreetNumber", StreetNumber)) MyCommand.Parameters.Add(New SqlParameter("@StreetAddon", StreetAddon)) MyCommand.Parameters.Add(New SqlParameter("@Zipcode", Zipcode)) MyCommand.Parameters.Add(New SqlParameter("@City", City)) MyCommand.Parameters.Add(New SqlParameter("@Organization", Organization)) Try MyConnection.Open() MyCommand.ExecuteNonQuery() bResult = True Catch ex As Exception bResult = False Finally MyConnection.Close() End Try Return bResult End FunctionThanks!
View 1 Replies
View Related
May 16, 2006
I am trying to run a SSIS package that contains a fuzzy lookup. I am using a flat file with about 7 million records as the input. The reference table has about 2000 records. The package fails after about 40,000 records with the following information:
------------------------
Warning: 0x8007000E at Data Flow Task, Fuzzy Lookup [228]: Not enough storage is available to complete this operation.
Warning: 0x800470E9 at Data Flow Task, DTS.Pipeline: A call to the ProcessInput method for input 229 on component "Fuzzy Lookup" (228) unexpectedly kept a reference to the buffer it was passed. The refcount on that buffer was 2 before the call, and 1 after the call returned.
Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: The ProcessInput method on component "Fuzzy Lookup" (228) failed with error code 0x8007000E. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0x8007000E.
Error: 0xC02020C4 at Data Flow Task, Flat File Source [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039.
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
-------------------------------
I have tried many things - changing the BufferTempStoragePath path to a drive that has plenty space, changed the MaxInsertCommitSize to 5,000...
What else can I do?
Thanks!
View 10 Replies
View Related
Oct 18, 2006
Hi
I get the following error when I use Fuzzy Lookup in a Data Flow task with TransactionOption property set to €śRequired€?
[Fuzzy Lookup [61]] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Cannot create new connection because in manual or distributed transaction mode.".
When I Change the TransactionProperty to €śSupported€? it works fine.
I need the property set to Required for it does an undo in the event of a failure.
Any ideas on how to get the Fuzzy Lookup to work
View 3 Replies
View Related
Sep 14, 2006
Hi,
I would like to know if the following is possible or if there is another way to implement this. I have a lookup transformation which i check to see if a specific record is stored. If nothing is returned i would like to insert a record into the table and then try the lookup again so that this time it will find the record and continue processing. How could i redirect the data flow to allow something like this to be done. I have tried linking the lookup failure constraint to an oledb destination and then attempted to link this back to the lookup but this has not worked.
Does anyone have any ideas on this?
Thanks in advance,
Grant
View 5 Replies
View Related
Sep 30, 2007
I have a Fuzzy Lookup in a Data Flow Task that is performing a simple text match based on a data view in SQL Server.
I keep obtaining the error below and I have no idea why. Is there a minimum number of rows required in the view in order for the lookup to work properly?
When I take the Store/Manage Index options off the lookup seems to work properly.
Thank you!
[Fuzzy Merchant Lookup [2832]] Error: SSIS Error Code DTS_E_OLEDBERROR.
An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available.
Source: "Microsoft SQL Native Client"
Hresult: 0x80040E14
Description: "A .NET Framework error occurred during execution of user-defined routine or aggregate "sp_FuzzyLookupTableMaintenanceInstall": System.Data.SqlClient.SqlException: Error number 8197 is invalid. The number must be from 13000 through 2147483647 and it cannot be 50000.
System.Data.SqlClient.SqlException:
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnectionSmi.EventSink.DispatchMessages(Boolean ignoreNonFatalMessages) at Microsoft.SqlServer.Server.SmiEventSink_Default.DispatchMessages(Boolean ignoreNonFatalMessages)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQuerySmi(Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.SqlServer.Dts.TxBestMatch.TableMaintenance.RaiseErrorId(SqlCommand cmd, FltmErrorMsgId MsgId, FltmErrorState State, SqlServerSeverity Severity)
at Microsoft.SqlServer.Dts.TxBestMatch.TableMaintenance.ReportErrors(SqlCommand cmd, ExceptionType Type, String ErrorMessage, FltmErrorMsgId MsgId, FltmErrorState State, SqlServerSeverity Severity, SqlErrorCollection errors)
at Microsoft.SqlServer.Dts.TxBestMatch.TableMaintenance.TranWrap(DataCleaningOperation c)
at Microsoft.SqlServer.Dts.TxBestMatch.TableMaintenance.ServerInstall(String etiTableName) .".
View 4 Replies
View Related
Jan 3, 2007
I'm creating my first SSIS package. The data source is a csv file and the destination is a SQL server table. I have several lookups. The date and time lookups are working fine. The string lookups are failing. I can see the records when I open the table in SQL Server. Do I need special handling for strings? Truncating?
Here are the error messages. I'd appreciate any input and help. Thanks.
[Lookup Commodity [2560]] Error: Row yielded no match during lookup.
[Lookup Commodity [2560]] Error: The "component "Lookup Commodity" (2560)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (2562)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The ProcessInput method on component "Lookup Commodity" (2560) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0209029.
View 5 Replies
View Related
May 12, 2008
Hello All, i am trying to connect to SQL Database using OleDb connection, but i keep getting error. here is my connection code. string strCon = "Provider=SQLOLEDB.1;Data source=.\SQLEXPRESS;AttachDbFileName=|DataDirectory|\Database.mdf;Integrated Security=True;User Instance=True"; OleDbConnection con = null; OleDbCommand cmd = null; con = new OleDbConnection(strCon); con.Open(); // deleting the exisitng one//
cmd = con.CreateCommand();
cmd.CommandText = "DELETE FROM Detail"; cmd.ExecuteNonQuery(); con.Close(); con.Dispose(); con = null;this is the error i am getting ..........No error message available, result code: DB_E_ERRORSOCCURRED(0x80040E21). Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.OleDb.OleDbException: No error message available, result code: DB_E_ERRORSOCCURRED(0x80040E21).Source Error:
Line 43: OleDbCommand cmd = null;Line 44: con = new OleDbConnection(strCon);Line 45: con.Open();Line 46: // deleting the exisitng one//Line 47: cmd = con.CreateCommand(); can some please tell me where i am making the mistake. I really appreciate it.Thanks
View 4 Replies
View Related
Mar 21, 2007
Hi heres my script, why does it not work?
CREATE PROC [dbo].[sp_append_CemexSQLDB_to_EQuIS5_V2]
@DBINnvarchar(50),
@DBOUTnvarchar(50)
AS
DECLARE @SQLStrVarchar(1000)
/* Start Transaction, incase of error */
BEGIN TRAN
/* Appending Ref tables */
SET @SQLStr = 'INSERT INTO ' + QUOTENAME(@DBOUT) '.dbo.rt_action_level_type'
SET @SQLStr = 'SELECT *'
SET @SQLStr = 'FROM ' + QUOTENAME(@DBIN) '.dbo.rt_action_level_type;' + ' OPTION (KEEP PLAN)'
EXEC (@SQLStr)
IF @@ERROR <> 0 GOTO ERRORHANDLER
COMMIT TRAN
RETURN 0
ERRORHANDLER:
PRINT "Unexpected Error Ocurred!"
ROLLBACK TRAN
RETURN 1
GO
The error is 'Server: Msg 170, Level 15, State 1, Procedure sp_append_SQLtables_to_NewDB_V2, Line 13
Line 13: Incorrect syntax near '.dbo.rt_action_level_type'.'
can anybody help
View 5 Replies
View Related
Oct 31, 2007
We did some "at scale" fuzzy lookup tests today and were rather disappointed with the performance. I'm wanting to know your experience so I can set my performance expectations appropriately.
We were doing a fuzzy lookup against a lookup table with 25 million rows. Each row has 11 columns used in the fuzzy lookup, each between 10-100 chars. We set CopyReferenceTable=0 and MatchIndexOptions=GenerateAndPersistNewIndex and WarmCaches=true. It took about 60 minutes to build that index table, during which, dtexec got up to 4.5GB memory usage. (Is there a way to tell what % of the index table got cached in memory? Memory kept rising as each "Finished building X% of fuzzy index" progress event scrolled by all the way up to 100% progress when it peaked at 4.5GB.) The MaxMemoryUsage setting we left blank so it would use as much as possible on this 64-bit box with 16GB of memory (but only about 4GB was available for SSIS).
After it got done building the index table, it started flowing data through the pipeline. We saw the first buffer of ~9,000 rows get passed from the source to the fuzzy lookup transform. Six hours later it had not finished doing the fuzzy lookup on that first buffer!!! Running profiler showed us it was firing off lots of singelton SQL queries doing lookups as expected. So it was making progress, just very, very slowly.
We had set MinSimilarity=0.45 and Exhaustive=False. Those seemed to be reasonable settings for smaller datasets.
Does that performance seem inline with expectations? Any thoughts to improve performance?
View 4 Replies
View Related
Jul 31, 2006
I am trying to run the Fuzzy Lookup on a SQL2K ref table using 2005 SSIS package and keep getting the following error:
[Fuzzy Lookup [2601]] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Cannot create a row of size 8061 which is greater than the allowable maximum of 8060.".
Regardless of the changes I make I cannot get this to work and it would make a huge difference if I could get it to run.
Can I create the FuzzyLookupIndex on a SQL2K database?
Any help or advice would be greatly appreciated.
Many thanks
C.
View 4 Replies
View Related
Aug 18, 2006
Hi,
I am getting this error in a Lookup component:
Error: 0xC020901E at Load_tblDelayfact, Lookup_DL_CODE [184]: Row yielded no match during lookup.
Error: 0xC0209029 at Load_tblDelayfact, Lookup_DL_CODE [184]: The "component "Lookup_DL_CODE" (184)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (186)" specifies failure on error. An error occurred on the specified object of the specified component.
Although the Lookup table is filled in with the following SELECT ststement:
SELECT DISTINCT DL_CODE, DL_COMMENT
FROM DL_Temp AS T1
WHERE NOT EXISTS(
SELECT * FROM DL_CODE AS T2
WHERE
T1.DL_CODE = T2.DL_CODE
AND
T1.DL_COMMENT = T2.DL_SENT_COMMENT
)
So there is no way that there is a record in DL_Temp (The data source) that does not exist in DL_CODE( the lookup table). Indded, I did serveral queries and tests to check that no such data exist and I found that no such record exists.
Please help me and tell me what can be the reason for this error. I used the same package on the same data yesterday and every thing went fine. Is that a bug that any of you faced before.
Thanks,
Aref
View 3 Replies
View Related
May 10, 2006
Hi,
Trying to get a particular SSIS is package working - while running the Package Installation wizard a package is reported with the following errors:
AcquireConnection method fails with error code 0xC0202009
Then Lookup fails validation and returns code 0xC020801C
The odd thing is the Lookup does not exist in the package, it did exist at one point but was deleted.
I have tried searching the XML and can't find any reference to the Lookup
Any suggestions appreciated...
Thanks,
John
View 4 Replies
View Related
May 13, 2006
below is the error message:
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Data Flow ACH Validate File and Header Info [Lookup ACH Batch Number [506]]: input column "ID" (571) and reference column named "BANKBATCHNBR" have incompatible data types.
"Lookup ACH Batch Number" is the name of the lookup transformation. input column "ID" has a string data type. reference column "BANKBATCHNBR" has a varchar(50) data type. can someone please tell me how i should go about debugging this validation error? thanks.
View 1 Replies
View Related
Mar 8, 2006
Hi there,
I'm currently designing an ETL process and I'm using lookup transformations.
In one of them, I encountered an 0x80070057 error which I cannot explain.
When I'm looking at the number of rows already processed, the number is not always the same when the error occurs. This is the first strange thing. A second strange thing is the explanations given by SSIS (log):
OnError,DWHAPP1,AWWRS9906,ODSTran1_1_1_DFT1,{002D0747-8F3E-43EF-A0EA-FE925E668ECB},{BAF1A259-7A26-49ED-B4E5-4BB9BB0BF004},08/03/2006 13:01:15,08/03/2006 13:01:15,-1073450974,0x,
The ProcessInput method on component "ODSTran1_1_1_D1_LU2" (15452) failed with error code 0x80070057. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
I really don't get it :-(
To explain you a bit what I'm doing, I do a lookup to check if the codes used in the facts (transaction table) exist in the referential tables (dimensions). The lookup in which the problem appears is a simple select on a table.
If someone has an explanation or (better) a solution, shoot! :-)
Renaud
View 3 Replies
View Related
May 14, 2008
Hi,
I get the following error when
i configure the lookup transform in the data flow task "Input column has a data type that cannot be matched".
This is the query that i use to set the reference table dataset
select firstname, lastname, address, email from customers_dimension cd , cust_test ct where cd.address<>ct.address.
I basically want to try and find all those records that have the same firstname, lastname, email in the customer dimension table where the records do not match. Both the input fields and the lookup fields have the same data type [varchar(max)].
It is pretty confusing, so much so that i did the lookup against the exact same table and got the same error.
Does anyone have a better idea as to what the problem is?
Thankyou
P.S.-This is the caching statement in the advanced tab
select * from
(SELECT firstName
FROM Customers_Dimension) as refTable
where [refTable].[firstName] = ?
View 1 Replies
View Related
Aug 10, 2007
Using the lookup on a table, working with Haselden book, I plug into table on the
reference table tab and then press columns tab and get "Unspecified Error" Any thoughts?
View 1 Replies
View Related
Aug 21, 2006
Hi,
I am new to using SSIS. I need to know how can I retrieve the records in a Lookup component that cause an error to use them in a Data Transfer task. I created the error event handler but I don't know how to retrieve the records causing the error to use them in the Data Transfer task.
Thanks in advance for help!
Thanks,
Aref
View 3 Replies
View Related
Jan 31, 2008
I've been searching around for a while now and slowly been making progress but I've finally hit a road block and I'm wondering if anyone else has ever gotten this to work. I'm using SS SP2 and the Microsoft OLE DB Provider for Oracle.
I have a lookup task in the data flow. The lookup table is in Oracle and it works fine as long as I don't check the "Enable Memory Restriction" box on the Advanced tab. As soon as that box is checked, the task will throw an error when I try to run it. I need to check it though to get to the Modify SQL Statement.
Here is what I do:
Create new Lookup task
Set the Oracle OLE DB connection
Use the following SQL for the reference table source:
SELECT COST_CENTER_ID, COST_CENTER_NB, start_dt, end_dt,
decode(SIGN(TO_NUMBER(TO_CHAR(START_DT,'MM'))-9),-1, TO_CHAR(START_DT,'YYYY'),
0, TO_CHAR(START_DT,'YYYY'),
1, TO_CHAR(START_DT + 365,'YYYY')
) START_FY,
decode(SIGN(TO_NUMBER(TO_CHAR(END_DT,'MM'))-9), NULL,
decode(SIGN(TO_NUMBER(TO_CHAR(SYSDATE,'MM'))-9),
-1, TO_CHAR(SYSDATE,'YYYY'),
0, TO_CHAR(SYSDATE,'YYYY'),
1, TO_CHAR(SYSDATE + 365,'YYYY')
),
-1, TO_CHAR(END_DT,'YYYY'),
0, TO_CHAR(END_DT,'YYYY'),
1, TO_CHAR(END_DT + 365,'YYYY')
) END_FY
FROM DIM_COST_CENTER
Then I go to the columns page and connect 1 field from the input column to the lookup column. Then click ok and it runs fine.
However, now I go to the advanced page and click the Enable Memory Restriction (at this point is where the problem occurs). As soon as the memory restriction is checked, the thing throws errors:
[Lookup [4732]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E14 Description: "ORA-00933: SQL command not properly ended ".
Then if I go in and Modify the SQL Statement into the Oracle syntax by removing the word AS and the [ ]'s it will get a new error:
select * from
(SELECT COST_CENTER_ID, COST_CENTER_NB, start_dt, end_dt,
decode(SIGN(TO_NUMBER(TO_CHAR(START_DT,'MM'))-9),-1, TO_CHAR(START_DT,'YYYY'),
0, TO_CHAR(START_DT,'YYYY'),
1, TO_CHAR(START_DT + 365,'YYYY')
) START_FY,
decode(SIGN(TO_NUMBER(TO_CHAR(END_DT,'MM'))-9), NULL,
decode(SIGN(TO_NUMBER(TO_CHAR(SYSDATE,'MM'))-9),
-1, TO_CHAR(SYSDATE,'YYYY'),
0, TO_CHAR(SYSDATE,'YYYY'),
1, TO_CHAR(SYSDATE + 365,'YYYY')
),
-1, TO_CHAR(END_DT,'YYYY'),
0, TO_CHAR(END_DT,'YYYY'),
1, TO_CHAR(END_DT + 365,'YYYY')
) END_FY
FROM DIM_COST_CENTER) refTable
where refTable.COST_CENTER_NB = ?
Now when running I get the error:
[Lookup [4732]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E5D. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E5D Description: "Parameter name is unrecognized.".
Followed by:
[Lookup [4732]] Error: OLE DB error occurred while binding parameters. Check SQLCommand and SqlCommandParam properties.
This is where I get stuck. I've gone into the XML and looked through everything and it all seems to match up in terms of variables lineage ID's and such, but I can't see any place to set the parameter name, which should be 0 since it is OLE DB. When I click the Enable Memory Restriction, the only difference I can notice in the XML is that the cachetype line changes from 0 to 2.
<property id="4738" name="CacheType" dataType="System.Int32" state="default" isArray="false" description="Specifies the cache type of the lookup table." typeConverter="CacheType" UITypeEditor="" containsID="false" expressionType="None">2</property>
Has anyone ever got parameters to work with Oracle and a lookup? Any work arounds? I have used a Merge Join with Conditional Split successfully, but I have about 5 other lookups that have to be done and it will be a killer and lots of work to try and re-sort for each merge join and conditional splits for each of them. Looking for any help with making the lookup work or some nicer work arounds.
Thanks.
View 2 Replies
View Related
