I'm currently designing an ETL process and I'm using lookup transformations.
In one of them, I encountered an 0x80070057 error which I cannot explain.
When I'm looking at the number of rows already processed, the number is not always the same when the error occurs. This is the first strange thing. A second strange thing is the explanations given by SSIS (log):
OnError,DWHAPP1,AWWRS9906,ODSTran1_1_1_DFT1,{002D0747-8F3E-43EF-A0EA-FE925E668ECB},{BAF1A259-7A26-49ED-B4E5-4BB9BB0BF004},08/03/2006 13:01:15,08/03/2006 13:01:15,-1073450974,0x,
The ProcessInput method on component "ODSTran1_1_1_D1_LU2" (15452) failed with error code 0x80070057. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
I really don't get it :-(
To explain you a bit what I'm doing, I do a lookup to check if the codes used in the facts (transaction table) exist in the referential tables (dimensions). The lookup in which the problem appears is a simple select on a table.
If someone has an explanation or (better) a solution, shoot! :-)
I'm working with an existing package that uses the fuzzy lookup transform. The package is currently working; however, I need to add some columns to the lookup columns from the reference table that is being used.
It seems that I am hitting a memory threshold of some sort, as when I add 3 or 4 columns, the package works, but when I add 5 columns, the fuzzy lookup transform fails pre-execute:
Pre-Execute Taking a snapshot of the reference table Taking a snapshot of the reference table Building Fuzzy Match Index component "Fuzzy Lookup Existing Member" (8351) failed the pre-execute phase and returned error code 0x8007007A.
These errors occur regardless of what columns I am attempting to add to the lookup list.
I have tried setting the MaxMemoryUsage custom property of the transform to 0, and to explicit values that should be much more than enough to hold the fuzzy match index (the reference table is only about 3000 rows, and the entire table is stored in less than 2MB of disk space.
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
I have a table called Orders with three fields, OrderID, Action,Status.Action and Status are code values with FK lookup to dbo.Action anddbo.Status respectively.Is it possible for me to return not just the code values but the filednames?For example:SELECT OrderID,Action,Status FROM Orders:Returns 1001,B,FHowever I would like dboAction.ActionName and dbo.Status.StatusName to bereturned instead.I.e Returns 1001,BUY,Filled.Is this possible?Thank you.
I cannot execute a package by using Execute Package task. I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
I'm using a Lookup object, but it dosn't works. Anybody knows this error?
[Lookup [29018]] Error: Row yielded no match during lookup.
[Lookup [29018]] Error: The "component "Lookup" (29018)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (29020)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The ProcessInput method on component "Lookup" (29018) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0209029.
I am trying to run a SSIS package that contains a fuzzy lookup. I am using a flat file with about 7 million records as the input. The reference table has about 2000 records. The package fails after about 40,000 records with the following information:
------------------------
Warning: 0x8007000E at Data Flow Task, Fuzzy Lookup [228]: Not enough storage is available to complete this operation. Warning: 0x800470E9 at Data Flow Task, DTS.Pipeline: A call to the ProcessInput method for input 229 on component "Fuzzy Lookup" (228) unexpectedly kept a reference to the buffer it was passed. The refcount on that buffer was 2 before the call, and 1 after the call returned. Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: The ProcessInput method on component "Fuzzy Lookup" (228) failed with error code 0x8007000E. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0x8007000E. Error: 0xC02020C4 at Data Flow Task, Flat File Source [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020. Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039. Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
-------------------------------
I have tried many things - changing the BufferTempStoragePath path to a drive that has plenty space, changed the MaxInsertCommitSize to 5,000...
I get the following error when I use Fuzzy Lookup in a Data Flow task with TransactionOption property set to €œRequired€?
[Fuzzy Lookup [61]] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Cannot create new connection because in manual or distributed transaction mode.".
When I Change the TransactionProperty to €œSupported€? it works fine. I need the property set to Required for it does an undo in the event of a failure. Any ideas on how to get the Fuzzy Lookup to work
I would like to know if the following is possible or if there is another way to implement this. I have a lookup transformation which i check to see if a specific record is stored. If nothing is returned i would like to insert a record into the table and then try the lookup again so that this time it will find the record and continue processing. How could i redirect the data flow to allow something like this to be done. I have tried linking the lookup failure constraint to an oledb destination and then attempted to link this back to the lookup but this has not worked.
I have a Fuzzy Lookup in a Data Flow Task that is performing a simple text match based on a data view in SQL Server.
I keep obtaining the error below and I have no idea why. Is there a minimum number of rows required in the view in order for the lookup to work properly?
When I take the Store/Manage Index options off the lookup seems to work properly.
Thank you!
[Fuzzy Merchant Lookup [2832]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "A .NET Framework error occurred during execution of user-defined routine or aggregate "sp_FuzzyLookupTableMaintenanceInstall": System.Data.SqlClient.SqlException: Error number 8197 is invalid. The number must be from 13000 through 2147483647 and it cannot be 50000. System.Data.SqlClient.SqlException: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnectionSmi.EventSink.DispatchMessages(Boolean ignoreNonFatalMessages) at Microsoft.SqlServer.Server.SmiEventSink_Default.DispatchMessages(Boolean ignoreNonFatalMessages) at System.Data.SqlClient.SqlCommand.RunExecuteNonQuerySmi(Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.SqlServer.Dts.TxBestMatch.TableMaintenance.RaiseErrorId(SqlCommand cmd, FltmErrorMsgId MsgId, FltmErrorState State, SqlServerSeverity Severity) at Microsoft.SqlServer.Dts.TxBestMatch.TableMaintenance.ReportErrors(SqlCommand cmd, ExceptionType Type, String ErrorMessage, FltmErrorMsgId MsgId, FltmErrorState State, SqlServerSeverity Severity, SqlErrorCollection errors) at Microsoft.SqlServer.Dts.TxBestMatch.TableMaintenance.TranWrap(DataCleaningOperation c) at Microsoft.SqlServer.Dts.TxBestMatch.TableMaintenance.ServerInstall(String etiTableName) .".
I'm creating my first SSIS package. The data source is a csv file and the destination is a SQL server table. I have several lookups. The date and time lookups are working fine. The string lookups are failing. I can see the records when I open the table in SQL Server. Do I need special handling for strings? Truncating?
Here are the error messages. I'd appreciate any input and help. Thanks.
[Lookup Commodity [2560]] Error: Row yielded no match during lookup.
[Lookup Commodity [2560]] Error: The "component "Lookup Commodity" (2560)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (2562)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The ProcessInput method on component "Lookup Commodity" (2560) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0209029.
We did some "at scale" fuzzy lookup tests today and were rather disappointed with the performance. I'm wanting to know your experience so I can set my performance expectations appropriately.
We were doing a fuzzy lookup against a lookup table with 25 million rows. Each row has 11 columns used in the fuzzy lookup, each between 10-100 chars. We set CopyReferenceTable=0 and MatchIndexOptions=GenerateAndPersistNewIndex and WarmCaches=true. It took about 60 minutes to build that index table, during which, dtexec got up to 4.5GB memory usage. (Is there a way to tell what % of the index table got cached in memory? Memory kept rising as each "Finished building X% of fuzzy index" progress event scrolled by all the way up to 100% progress when it peaked at 4.5GB.) The MaxMemoryUsage setting we left blank so it would use as much as possible on this 64-bit box with 16GB of memory (but only about 4GB was available for SSIS).
After it got done building the index table, it started flowing data through the pipeline. We saw the first buffer of ~9,000 rows get passed from the source to the fuzzy lookup transform. Six hours later it had not finished doing the fuzzy lookup on that first buffer!!! Running profiler showed us it was firing off lots of singelton SQL queries doing lookups as expected. So it was making progress, just very, very slowly.
We had set MinSimilarity=0.45 and Exhaustive=False. Those seemed to be reasonable settings for smaller datasets.
Does that performance seem inline with expectations? Any thoughts to improve performance?
I am trying to run the Fuzzy Lookup on a SQL2K ref table using 2005 SSIS package and keep getting the following error:
[Fuzzy Lookup [2601]] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Cannot create a row of size 8061 which is greater than the allowable maximum of 8060.".
Regardless of the changes I make I cannot get this to work and it would make a huge difference if I could get it to run.
Can I create the FuzzyLookupIndex on a SQL2K database?
Error: 0xC020901E at Load_tblDelayfact, Lookup_DL_CODE [184]: Row yielded no match during lookup.
Error: 0xC0209029 at Load_tblDelayfact, Lookup_DL_CODE [184]: The "component "Lookup_DL_CODE" (184)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (186)" specifies failure on error. An error occurred on the specified object of the specified component.
Although the Lookup table is filled in with the following SELECT ststement:
SELECT DISTINCT DL_CODE, DL_COMMENT FROM DL_Temp AS T1
WHERE NOT EXISTS(
SELECT * FROM DL_CODE AS T2 WHERE T1.DL_CODE = T2.DL_CODE AND T1.DL_COMMENT = T2.DL_SENT_COMMENT
)
So there is no way that there is a record in DL_Temp (The data source) that does not exist in DL_CODE( the lookup table). Indded, I did serveral queries and tests to check that no such data exist and I found that no such record exists.
Please help me and tell me what can be the reason for this error. I used the same package on the same data yesterday and every thing went fine. Is that a bug that any of you faced before.
Error at Data Flow ACH Validate File and Header Info [Lookup ACH Batch Number [506]]: input column "ID" (571) and reference column named "BANKBATCHNBR" have incompatible data types.
"Lookup ACH Batch Number" is the name of the lookup transformation. input column "ID" has a string data type. reference column "BANKBATCHNBR" has a varchar(50) data type. can someone please tell me how i should go about debugging this validation error? thanks.
i configure the lookup transform in the data flow task "Input column has a data type that cannot be matched".
This is the query that i use to set the reference table dataset
select firstname, lastname, address, email from customers_dimension cd , cust_test ct where cd.address<>ct.address.
I basically want to try and find all those records that have the same firstname, lastname, email in the customer dimension table where the records do not match. Both the input fields and the lookup fields have the same data type [varchar(max)].
It is pretty confusing, so much so that i did the lookup against the exact same table and got the same error.
Does anyone have a better idea as to what the problem is?
Thankyou
P.S.-This is the caching statement in the advanced tab select * from
(SELECT firstName FROM Customers_Dimension) as refTable where [refTable].[firstName] = ?
Using the lookup on a table, working with Haselden book, I plug into table on the reference table tab and then press columns tab and get "Unspecified Error" Any thoughts?
I am new to using SSIS. I need to know how can I retrieve the records in a Lookup component that cause an error to use them in a Data Transfer task. I created the error event handler but I don't know how to retrieve the records causing the error to use them in the Data Transfer task.
I've been searching around for a while now and slowly been making progress but I've finally hit a road block and I'm wondering if anyone else has ever gotten this to work. I'm using SS SP2 and the Microsoft OLE DB Provider for Oracle.
I have a lookup task in the data flow. The lookup table is in Oracle and it works fine as long as I don't check the "Enable Memory Restriction" box on the Advanced tab. As soon as that box is checked, the task will throw an error when I try to run it. I need to check it though to get to the Modify SQL Statement. Here is what I do: Create new Lookup task Set the Oracle OLE DB connection Use the following SQL for the reference table source: SELECT COST_CENTER_ID, COST_CENTER_NB, start_dt, end_dt, decode(SIGN(TO_NUMBER(TO_CHAR(START_DT,'MM'))-9),-1, TO_CHAR(START_DT,'YYYY'), 0, TO_CHAR(START_DT,'YYYY'), 1, TO_CHAR(START_DT + 365,'YYYY') ) START_FY, decode(SIGN(TO_NUMBER(TO_CHAR(END_DT,'MM'))-9), NULL, decode(SIGN(TO_NUMBER(TO_CHAR(SYSDATE,'MM'))-9), -1, TO_CHAR(SYSDATE,'YYYY'), 0, TO_CHAR(SYSDATE,'YYYY'), 1, TO_CHAR(SYSDATE + 365,'YYYY') ), -1, TO_CHAR(END_DT,'YYYY'), 0, TO_CHAR(END_DT,'YYYY'), 1, TO_CHAR(END_DT + 365,'YYYY') ) END_FY FROM DIM_COST_CENTER
Then I go to the columns page and connect 1 field from the input column to the lookup column. Then click ok and it runs fine. However, now I go to the advanced page and click the Enable Memory Restriction (at this point is where the problem occurs). As soon as the memory restriction is checked, the thing throws errors: [Lookup [4732]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E14 Description: "ORA-00933: SQL command not properly ended ". Then if I go in and Modify the SQL Statement into the Oracle syntax by removing the word AS and the [ ]'s it will get a new error: select * from (SELECT COST_CENTER_ID, COST_CENTER_NB, start_dt, end_dt, decode(SIGN(TO_NUMBER(TO_CHAR(START_DT,'MM'))-9),-1, TO_CHAR(START_DT,'YYYY'), 0, TO_CHAR(START_DT,'YYYY'), 1, TO_CHAR(START_DT + 365,'YYYY') ) START_FY, decode(SIGN(TO_NUMBER(TO_CHAR(END_DT,'MM'))-9), NULL, decode(SIGN(TO_NUMBER(TO_CHAR(SYSDATE,'MM'))-9), -1, TO_CHAR(SYSDATE,'YYYY'), 0, TO_CHAR(SYSDATE,'YYYY'), 1, TO_CHAR(SYSDATE + 365,'YYYY') ), -1, TO_CHAR(END_DT,'YYYY'), 0, TO_CHAR(END_DT,'YYYY'), 1, TO_CHAR(END_DT + 365,'YYYY') ) END_FY FROM DIM_COST_CENTER) refTable where refTable.COST_CENTER_NB = ?
Now when running I get the error:
[Lookup [4732]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E5D. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E5D Description: "Parameter name is unrecognized.". Followed by: [Lookup [4732]] Error: OLE DB error occurred while binding parameters. Check SQLCommand and SqlCommandParam properties.
This is where I get stuck. I've gone into the XML and looked through everything and it all seems to match up in terms of variables lineage ID's and such, but I can't see any place to set the parameter name, which should be 0 since it is OLE DB. When I click the Enable Memory Restriction, the only difference I can notice in the XML is that the cachetype line changes from 0 to 2.
<property id="4738" name="CacheType" dataType="System.Int32" state="default" isArray="false" description="Specifies the cache type of the lookup table." typeConverter="CacheType" UITypeEditor="" containsID="false" expressionType="None">2</property>
Has anyone ever got parameters to work with Oracle and a lookup? Any work arounds? I have used a Merge Join with Conditional Split successfully, but I have about 5 other lookups that have to be done and it will be a killer and lots of work to try and re-sort for each merge join and conditional splits for each of them. Looking for any help with making the lookup work or some nicer work arounds.
Maybe someone can assist me in solving the following error. I created a facttable with surrogate keys. In the package that processes the fact data a lookup-task is supposed to find the appropriate dimension key. If a certain dimension row is not found, this error is redirected. In this errorflow a stored procedure will add the missing row in the dimensiontable, after which another lookup takes place. Then the results of both lookups are brought together in a union all task.
When I test this errorflow I notice that the missing dimension row is indeed added to the dimensiontable. The only task that turns red is the first lookup. Please refer below for the errormessages. I understand the first one; that is why I created the redirection. But what does the rest mean? And even if I redirect the error for further processing is it still counted as a raised error? If the maximum allowed is 1 (as indicated) will the task still fail?
Any help will be greatly appreciated. Thanks in advance and regards,
Albert.
The errormessages are as follows: Error: 0xC020901E at Xforms, lookups en wegschrijven, Lookup LosplaatsKey [5071]: Row yielded no match during lookup. Error: 0xC0047072 at Xforms, lookups en wegschrijven, DTS.Pipeline: No object exists with the ID 5317. Error: 0xC0047022 at Xforms, lookups en wegschrijven, DTS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Lookup nwe losplaats" (5315) failed with error code 0xC0047072. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. Error: 0xC0047021 at Xforms, lookups en wegschrijven, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0047072. There may be error messages posted before this with more information on why the thread has exited. Error: 0xC0047039 at Xforms, lookups en wegschrijven, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread2" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled. Error: 0xC0047039 at Xforms, lookups en wegschrijven, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled. Error: 0xC0047021 at Xforms, lookups en wegschrijven, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread2" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited. Error: 0xC0047021 at Xforms, lookups en wegschrijven, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread3" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited. . . . Task failed: Xforms, lookups en wegschrijven Warning: 0x80019002 at FactRittenInit: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (8) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. SSIS package "FactRittenInit.dtsx" finished: Failure.
I'm new to the SSIS world and am writing my first package. What the package is supposed to do is to take the XML export from one database and import into an identical database (production). There's no connection between the two DBs. During import, the SSIS package checks if there's any primary key values in a table already exist in the production DB and only imports the new records.
So here's the data flow of my package: XML Source -> Lookup -> Conditional Split -> SQL Server Destination. I'm doing a lookup against the same destination DB to check if a record (primary key value) already exists or not, and doing the condition ISNULL(id_out) in the Conditional Split. I really don't know if this is the correct way to implement it. The Lookup control errors out during debugging in Visual Studio. Here's what;s on the progress tab:
[Lookup [1745]] Error: The "component "Lookup" (1745)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (1747)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The ProcessInput method on component "Lookup" (1745) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
How do I get more specific error on what went wrong?
Say I want to lookup a value in another dataset, but there is a grouping that requires you to know what the values for each level is in order to get to the correct detail record.  Can you still use the lookup function with more than one field to compare against? So for example
Department \___SalesPerson     \___Measure
I want to be able to add a new row at the Measure level, but lookup each field from another dataset. In order to do that I will need the Department AND SalesPerson values to do the lookup, but I dont think the Lookup function will let us do that will.
the SQL Management Studio keeps crashing out on me everytime i try to open a Lookup in one of my DTS packages i am using in the Legacy section.
I am copying the DTS package across and need to change the server connections (which i do), but then i was getting a permissions based error when the package ran when it tries to access the Lookup.
I tried to open the Lookup and the SQL Management Studio hanged when it tried to display the details for the lookup. It's done this many times and i have tried different files incase one was corrupted to no avail.
I'm trying to lookup a value in another table linking on a column of datatype DT_R8. The lookup transform is complaining that I can't link on that datatype. However, the documentation says that it should work. I'm using the April CTP. Is this fixed in a later version? Any suggestions?
I recieve an error when I use the Lookup component in SSIS that reads:
Statement(s) could not be prepared.
I'm using a SQL 2005 DB as the source which runs into a lookup table and is use to compare records with an SQL 2000 Database. I've created connection managers successfully to both these databases. When trying to use the results of an SQL Query for the lookup to the SQL 2000 database (which is a linked server) and I try to map the columns, the error pops up and exits out of the lookup properties Window
The details to the error read:
Program Location: at Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.Connections.SQLTaskConnectionOleDbClass.PrepareSQLStatement(String sql, Boolean bypassPrepare) at Microsoft.DataTransformationServices.Design.DtsConnectionCommonControl.CheckSqlQuery()
I'm looking to use the results of this comparison to output in some form of a report. Ideas would be greatly appreciated!
I'm building a package that is using the Fuzzy Lookup data flow item and I'm receiving an error message that is troubling me!!! "Fuzzy Lookup The length of input column is not equal to the length of the reference column that it is being matched against"
If anyone can provide me any insight it would be greatly appreciated!
I have a data flow task and trying to transform datas OLTP to STG db and i have lookup tables.
I do lookuping like this
first a lookup that lookup my table with connected input column parameter
second a derived column is connected to lookup's error output for when lookup can't find the value and this derived column returned "0" or "-1" this means that lookuped value can't find and insert this value to my table
third a union that union lookup and derived column
i want to ask this is there any different solution for doing this, because if i more than 5 or 6 lookup in my ssis package i add all of them derived columns and unions and when i change something i have to change or correct the unions step by step.
I have a table t1 and t2 with following structure.
t1(
ID1 int IDENTITY PRIMARY KEY,
name1 varchar(20),
addr1 varchar(20)
)
t2(
ID2 int IDENTITY PRIMARY KEY,
name2 varchar(20),
addr2 varchar(20)
)
Objective here is to match name1 and name2 column using fuzzy look up. So, I used t1 as source table and t2 as reference/lookup table and mapped name1 and name2 column in Fuzzy look up editor. As output column I selected "ID2" column from t2.
Now when i run the package, it throws error
"Multiple identity columns specified for table '##FLRef_070522_14:16:39_5064_c1c6cbbd-5a54-4e36-9154-1371118f0931'. Only one identity column per table is allowed."
I suppose that during Fuzzy lookup, SSIS internally created temporary table and thats where this error occurs when adding two columns as identity. Can someone help me in resolving this issue.
Thanks
Sid
PS: I need ID2 column as output for further calculation.
I Can't reproduce the error if I run the package stand-alone.
I'm using the same lookup call (same table, etc.) in 2 packages that are running in parallel (called by a parent package).
[LKP_UnderwriterId [72283]] Error: An OLE DB error has occurred. Error code: 0x80040E05. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80040E05 Description: "Object was open.".
I have created a SSIS package with a Fuzzy lookup transformation.
It matches on 18 columns, looks for a 95 % match and has 50 variables that are passed through the transformation.
When I run the transformation it fails with the following error :-
Warning: 0x8007000E at Data Flow Task, Fuzzy Lookup [228]: Not enough storage is available to complete this operation. Warning: 0x800470E9 at Data Flow Task, DTS.Pipeline: A call to the ProcessInput method for input 229 on component "Fuzzy Lookup" (228) unexpectedly kept a reference to the buffer it was passed. The refcount on that buffer was 2 before the call, and 1 after the call returned. Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: The ProcessInput method on component "Fuzzy Lookup" (228) failed with error code 0x8007000E. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0x8007000E. Error: 0xC02020C4 at Data Flow Task, Flat File Source [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020. Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039. Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
I have tried all suggestions to fix this e.g. implement SQL Server 2005 service pack 2 - didn't fix it, up your virtual memory - didn't fix it.
