Lookup Fails When Package Runs In Development On Another PC Than The One Where It Was Created Error: 0xC020824E
Feb 27, 2007
Hi all,
I try to make SSSIS packages made on my pc accesible to an other user of SSIS (both running on Windows 2000). The packages are on a shared drive in our LAN.. Some configurationfiles are use to configure the Oracle DBconnection.The same files are on the same location on both PC's
The other user can open and run the packages but from the moment the lookup buffers are loaded, we get the following errors:
Error: 0xC0202009 at AB_ADDRESS_DF, LOOKUP_POST_ID [22801]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "".
Error: 0xC020824E at AB_ADDRESS_DF, LOOKUP_POST_ID [22801]: OLE DB error occurred while populating internal cache. Check SQLCommand and SqlCommandParam properties.
Error: 0xC004701A at AB_ADDRESS_DF, DTS.Pipeline: component "LOOKUP_POST_ID" (22801) failed the pre-execute phase and returned error code 0xC020824E.
Any suggestion would be most welcome.
View 3 Replies
ADVERTISEMENT
Jul 10, 2006
When I run a package I created in the development Studio it runs fine but if I create a job and run it I get an error "The AcquireConnection method call to the connection manager "ODS" failed with error code 0xC0202009"
I have the package setup to use a XML config file and it works fine on all the other packages but this one will not work.
View 6 Replies
View Related
Dec 18, 2000
I'm trying to run a job which moves data from one machine to another. I can manually execute the package successfully, but the job always fails. I get the dreaded error message 18456, "login failis for user "". I have double checked the logins for both machines,(sql server agent AND the sql server authentication).
Also, I can run a select statement (from server_ to server_2) successfully from query analyzer i.e.
Select *
from <linked_server_name>.<database>.<database_owner>.<table_name>
however, if I run this query from server_2 to server_1 I get the failed login message similar to the error message found in the job history. Since both servers accept nt logins, where is my problem? They are both set up as linked servers, and they are both mssql oledb.
Any suggestions will be appreciated!
thanks
View 1 Replies
View Related
Dec 31, 2007
Like the name says, I'm trying hard, but I'm obviously missing something. Okay, I'm new to SSIS. I'm trying to write a job that deletes some Excel files on the server, copies some Excel files from a Sharepoint instance to the location where the deleted files were, runs an executable to manipulate those files, and then imports them to my SS instance.
the package runs fine when I run it from Managment Studio after installing it on the server. The 'execute task' fails when I run the job containing the package. After creating a proxy to have the SQL Server agent Service run with appropriate permissions, I thought I would have been rid of permissions issues (I gave the proxy way too much permission in an effort to narrow in on my issue), but I could still be missing something.
The job doesn't get into the package enough to even start writing to my log file, and all I get in the job history is the very cryptic 'DTExec: The package execution returned DTSER_FAILURE (1) ' error. If anyone has ideas, I would greatly appreciate being shown the error of my ways.
Thanks!
View 6 Replies
View Related
Dec 28, 2007
I have a 7 step SSIS package that manipulates some data on a DB2 database. The package executes perfectly in Business Intelligence Development Studio. I save the package to my SSIS store and then point my scheduled task to it and it fails after about 9 seconds everytime. I have an identical job that works with a different DB2 database that works without any problem. The only difference is the database it's pointing to.
The package is executing as the same user who created it, which has sysadmin to both the SSIS store and the SQL instance the package is executing on. When I saved the package I selected "Rely on server storage roles for access control" for the protection level.
This one is driving me crazy, can't figure it out. Any idea's?
View 7 Replies
View Related
Jun 14, 2007
I have created an SSIS package which, as its 2nd step, picks up a .dbf table and does a Data Flow Task of putting the .dbf table into a SQL Server 2005 table (which was just truncated in Step 1).
The Connection Manager that works on the .dbf table is Native OLE DBMicrosoft Jet 4.0 OLE DB Provider.
The entire SSIS package runs perfectly when i run it from my development environment.
I then assigned this Package to a SQL Server 2005 Job. The entire package is the sole step of the job.
But when I run the SQL Job, the Job fails immediately on Step 2.
Here is the error message in View History of the SQL Job:
-----------------------------------------------------------------------------
Executed as user: DBASE01SQLExec. ...on 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:48:37 AM Progress: 2007-06-14 11:48:37.91 Source: DBF to ScanUS_Process Validating: 0% complete End Progress Progress: 2007-06-14 11:48:37.91 Source: DBF to ScanUS_Process Validating: 33% complete End Progress Error: 2007-06-14 11:48:37.91 Code: 0xC0202009 Source: DBF to ScanUS_Process ScanUS DBF Output File [1] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37. End Error Error: 2007-06-14 11:48:37.91 Code: 0xC02020E8 Source: DBF to ScanUS_Process ScanUS DBF Output File [1] Description: Opening a rowset for "scanus_process" failed. Check that the object exists in the database. End Error Error: 2007-06-14 11:48:37.95 Code: 0xC004706B Source: DBF to ScanUS_Process DTS.Pipeline Description: "component "ScanUS... The package execution fa... The step failed.
-----------------------------------------------------------------------------
Could someone suggest why this works OK within SSIS but not when the SSIS Pakcage is called from SQL?
thx very much/spirits.
seth j hersh
View 7 Replies
View Related
Oct 16, 2007
I was facing some issue on MP. Yesterday I changed the SQL services to use the local admin account. That didn't help my MP issue. But it may have created another issue.
When I run the package manually/locally it runs fine. But the scheduled job run and fails with the Title string.
---------------------------------
Executed as user: IL06EDM00SYSTEM. ...tart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnStart: DTSStep_DTSExecuteSQLTask_2 DTSRun OnStart: DTSStep_DTSExecuteSQLTask_3 DTSRun OnError: DTSStep_DTSExecuteSQLTask_2, Error = -2147467259 (80004005) Error string: Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error Detail Records: Error: -2147467259 (80004005); Provider Error: 18452 (4814) Error string: Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_2 DTSRun OnError: DTSStep_DTSExecuteSQLTask_3, Error = -2147467259 (80004005) Error string: Login failed for user '(null)'. Reason: Not associated with ... Process Exit Code 2. The step failed.
--------------------------------------------------------------
Any ideas.
View 1 Replies
View Related
Jun 23, 2006
I am attempting to write a Windows service that watches a database for uploaded files to import. When a new file is found, the corresponding SSIS package is run from the file system with variables passed through. I started development as a Windows app and copied the functionality to a service.
The app runs fine. The service does not. I get a "Failure" each time a package is executed. Everything is identical behind the scenes with the obvious exceptions that OnStart and OnStop handlers are buttons in the app. I added a script task at the beginning of one of the SSIS packages to notify me that it is even running at all. It doesn't even hit that initial task.
Again, the app will run all packages just fine. The data is imported and the results return as "Success."
The following is the code executing the package. Any help is appreciated. I've been banging my head on this one for a few days now. (Is there a tag to format a code sample?)
Dim pkgLocation As String
Dim pkg As New Package
Dim app As New Application
Dim pkgResults As DTSExecResult
pkgLocation = sPackageFolder & PackageName & ".dtsx"
pkg = app.LoadPackage(pkgLocation, Nothing)
Dim vars As Variables = pkg.Variables
vars("ImportId").Value = ImportId
vars("ProductionServer").Value = ProductionServer
vars("ProductionDatabase").Value = ProductionDatabase
vars("SourceFileName").Value = FileName
vars("SourceFilePath").Value = FilePath
pkgResults = pkg.Execute()
View 3 Replies
View Related
Apr 27, 2004
Hi ,
I am trying to run DTS package (stored on SQL Server) using Visual basic but i am getting the following error
Runtime error '-2147217843 (80040e4d)'
Login failed for 'MyUserID'
*************************************
i used the following code in VB program
Sub Command1_Click()
Dim dtsp As New DTS.Package
dtsp.LoadFromSQLServer _
ServerName:="MyServer", _
ServerUserName:="MyUserID", _
ServerPassword:="MyPassword", _
PackageName:="DTSDemo"
dtsp.Execute
End Sub
*************************************
I can Run the package direct from SQL server but get error by Vb program. Any idea why it is so.
Thanks
View 3 Replies
View Related
Jun 30, 2014
I have two servers: one production and one development. There is a third party query that runs on both servers. Yes, the query is poorly tuned - I cannot change it. In production, it runs in 54 minutes. In development, I have tried to let it run for days and it never completes.
Here's what I have tried so far:
Compared the settings of production vs. development. The settings are very similar - the development box is larger, 4 times more memory.
Max degree of parallelism is the same on both boxes.
No compression on both boxes.
The production server is fairly busy, the development server is empty - this is the only process running on it.
Plenty of free disk space.
Updated all statistics on all databases touched by the query on dev.
Indexing is the same on both boxes.
The development box is running MSSQL2012.
The production box is running MSSQL2008R2.
What I've noticed:
The query consumes a massive amount of CPU time.
HUGE number of reads (16 million reads for 10 writes according to sp_WhoIsActive)
Largest wait types are CXPACKET, SOS_SCHEDULER_YIELD and TRACEWRITE respectively.
wait_typesum_wait_time_mspct_wait_timesum_waiting_tasksavg_wait_time_ms
CXPACKET4142765580.7176307423.5
SOS_SCHEDULER_YIELD24146944.7532725530.0
TRACEWRITE19856343.914831338.9
View 9 Replies
View Related
Mar 30, 2007
Hi All,
I have created a SSIS package with a Fuzzy lookup transformation.
It matches on 18 columns, looks for a 95 % match and has 50 variables that are passed through the transformation.
When I run the transformation it fails with the following error :-
Warning: 0x8007000E at Data Flow Task, Fuzzy Lookup [228]: Not enough storage is available to complete this operation.
Warning: 0x800470E9 at Data Flow Task, DTS.Pipeline: A call to the ProcessInput method for input 229 on component "Fuzzy Lookup" (228) unexpectedly kept a reference to the buffer it was passed. The refcount on that buffer was 2 before the call, and 1 after the call returned.
Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: The ProcessInput method on component "Fuzzy Lookup" (228) failed with error code 0x8007000E. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0x8007000E.
Error: 0xC02020C4 at Data Flow Task, Flat File Source [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039.
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
I have tried all suggestions to fix this e.g. implement SQL Server 2005 service pack 2 - didn't fix it, up your virtual memory - didn't fix it.
Can anyone suggest what to do next ? Thx - Gary
View 8 Replies
View Related
Feb 7, 2007
I've migrated a package that has worked in our development environment. In both environments (dev & staging) I am in the BUILTIN/Administrators local group which is in the sysadmin server role.
In our staging environment, I execute DTEXEC command from the command line and get the following results.
D:Reporting>"D:Program FilesMicrosoft SQL Server90DTSBinnDTEXEC.EXE" /SQL "MSDBProcessReportingDatabase" /SERVER USFKL16DB1CI01 /MAXCONCURRENT " -1 " /
CHECKPOINTING OFF /REPORTING V /SET "Package.Variables[User::RunID].Value";65 /
SET "Package.Connections[RSAnalytics].InitialCatalog";"VR New Test 1 Dec28-FndPrj 1 Dec28"
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 1:46:43 PM
Could not load package "MSDBProcessReportingDatabase" because of error 0xC0014062.
Description: The LoadFromSQLServer method has encountered OLE DB error code 0x80004005 (Login timeout expired). The SQL statement that was issued has failed.
Source:
Started: 1:46:43 PM
Finished: 1:47:02 PM
Elapsed: 18.797 seconds
In addition to my login, all logins that access this package are in the sysadmin role; and I have gone back and included these logins in msdb's dts_operator role. Has anyone seen this before?
Thanks - Dave
View 1 Replies
View Related
Mar 16, 2006
Running eval. edition of Sql Server Standard 2005. "Insufficient product level" error is thrown during validation phase of an OleDBCommand data flow task. This task type is not licensed in Sql Server 2005 standard? The component runs a very simple sql update statement against a one row table in Sql Server 2005.
If it works from BIDS, should it not work from dtexec.exe on the same box?
Does dtexec run under the security context of the logged in user?
Thanks,
Ken
View 6 Replies
View Related
Aug 17, 2006
I have an SSIS package that runs fine through command pormpt although when I try to run it from a SQL Servr Agent Job CmdExec step it bombs out. Please help this has me stumped...the SSIS package uses an XML connection string so certain key settings such as connection strings and email info can be changed easily. Currently this is all on the same machine. I have not moved it beyond where I am developing.
On the command line I am using the following command...
dtexec /F "S:connectionscontacts.dtsConfig" /DE "password"
Below is the output log...
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 6:59:40 PM
Progress: 2006-08-16 18:59:41.29
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.29
Source: Data Flow Task
Validating: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.71
Source: Data Flow Task
Validating: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.73
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.81
Source: Data Flow Task
Pre-Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.84
Source: Data Flow Task
Pre-Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.90
Source: Data Flow Task
Pre-Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.90
Source: Data Flow Task
Pre-Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Cleanup: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.95
Source: Send Mail Task
The SendMail task is initiated.: 0% complete
End Progress
Progress: 2006-08-16 18:59:42.09
Source: Send Mail Task
The SendMail task is completed.: 100% complete
End Progress
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 6:59:40 PM
Finished: 6:59:42 PM
Elapsed: 1.984 seconds
When I try to use the same command within SQL Server Agent Job using a CmdExec step I get the following error...
Description: The package is attempting to configure from the XML file "S:connectionscontacts.dtsConfig". End Info Warning: 2006-08-16 18:40:03.15 Code: 0x80012012 Source: contactsPackage Description: The configuration file name "S:connectionscontacts.dtsConfig" is not valid. Check the configuration file name. End Warning Warning: 2006-08-16 18:40:03.15 Code: 0x80012059 Source: contactsPackage Description: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed. End Warning Info: 2006-08-16 18:40:03.20 ... Process Exit Code 1. The step failed.
Thanks in advance for any help!!!
View 2 Replies
View Related
Jun 1, 2007
Hi all,
the SQL Management Studio keeps crashing out on me everytime i try to open a Lookup in one of my DTS packages i am using in the Legacy section.
I am copying the DTS package across and need to change the server connections (which i do), but then i was getting a permissions based error when the package ran when it tries to access the Lookup.
I tried to open the Lookup and the SQL Management Studio hanged when it tried to display the details for the lookup. It's done this many times and i have tried different files incase one was corrupted to no avail.
Anyone have any ideas of what i can try?
Thanks
Jordan
View 2 Replies
View Related
Jul 5, 2006
Has anybody seen this issue already?
If you try to "enable memory restriction" from the Lookup component GUI you need to input both 32 and 64 bit size of maximum memory. However when clicking "OK" on the editor you get a message like :
TITLE: Microsoft Visual Studio
------------------------------
Error at Update Execution Logs [Lookup folder path 1 [4429]]: Failed to set property "MaxMemoryUsage64" on "component "Lookup folder path 1" (4429)".
------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC0204006 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
BUTTONS:
OK
------------------------------
You can only set the properties directly for mthe Properties window (F4).
I think this is a post SP1 bug in Visual studio designer...
View 5 Replies
View Related
May 2, 2008
Hi All,
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
Other times I get this error message:
.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)
And still other times
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
Does anyone have any other suggestions to try?
Thanks.
View 4 Replies
View Related
Jun 26, 2006
I've mined countless threads all over the Net where people are having my problem, but none of the solutions I've seen seem to apply.
When I run a DTS package from Enterprise Manager, everything works great. When I schedule the same package as a job, it fails immediately and reports this error:
Executed as user: SERVER-NAMESYSTEM. DTSRun: Loading... Error: -2147221005 (800401F3); Provider Error: 0 (0) Error string: Invalid class string Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts80.hlp Help context: 713. Process Exit Code 1. The step failed.
My hunch is the SERVER-NAMESYSTEM.DTSRun account doesn't have sufficient privileges, but I can't find how/where to fix that.
Help, please.
Thanks,
Doug
View 2 Replies
View Related
Oct 8, 2007
I have a stored procedure that syncs 2 databases. It runs fine if I go into the stored procedures and execute it manually, there are a few errors but it doesnt choke on them it completes with the desired end result. However if I create a job to run this dbo, it fails, The error log shows this:
Date,Source,Severity,Step ID,Server,Job Name,Step Name,Notifications,Message,Duration,Sql Severity,Sql Message ID,Operator Emailed,Operator Net sent,Operator Paged,Retries Attempted
10/03/2007 16:06:00,sync,Error,0,MACHINENAME,sync,(Job outcome),,The job failed. The Job was invoked by User MACHINENAMEAdministrator. The last step to run was step 1 (sync).,00:00:19,0,0,,,,0
10/03/2007 16:06:00,sync,Error,1,MACHINENAME,sync,sync,,Executed as user: companyname. ... 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) DNN User Exists [SQLSTATE 01000] (Message 0) Updaing Roles __noelle(5281) [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) DNN User Exists [SQLSTATE 01000] (Message 0) Updaing Roles 0(5036) [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) New DNN User [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) DNN User Exists [SQLSTATE 01000] (Message 0) Updaing Roles 0000000(3795) [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) DNN User Exists [SQLSTATE 01000] (Message 0) Updaing Roles 007(8) [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exis... The step failed.,00:00:19,14,3621,,,,0
So the error is 3621, and the severity is 14 which as I understand it means Insufficient Permissions.
I have already tried this:
Making the Job Agent service logon as MACHINeNAME/Administrator instead of System, giving the user here (companyname) more permissions, but I am at a loss as to why this runs ok when manually executed but fails when run as a job. I have created the job by scripting the dbo "Execute to a file" and having the job run that file as a step, I have also tried copying and pasting the code from the stored procedure into the job step. It always fails for the same reason.
I must say I am very new to SQL, I am a network admin and have inherited this database and server from another client and have to get this sync task to run daily at certain intervals.
Please can anyone shed light on this issue?
Thanks,
View 7 Replies
View Related
Jul 20, 2005
A colleague of mine has a query which fails to run under SQLAgentbatch with the following error:The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value. [SQLSTATE 22007] (Error 242) Thestatement has been terminated. [SQLSTATE 01000] (Error 3621). Thestep failed.He can run the same query sucessfully via query analyzer (i.e. noerrors, and it does what he wants)If I try to run the same query through Query Analyzer on myworkstation, I get a different error altogether:Server: Msg 242, Level 16, State 3, Procedure DateForGrouping, Line 11The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.Any idea what might be causing these differences in behaviourdepending on how and/or where the query is run from?The (working) statement in question is:================================================== ======================insert into Summary_ReferrerSalesselect DateCreated,ReferrerID,ReferrerIDCount,PUIDCount,ReferrerDescription,0 as TotalOrderValue,0 as TotalOrderLinesfrom vw_ReferrerPopularityWarning: Null value is eliminated by an aggregate or other SEToperation.(11996 row(s) affected)================================================== ====================And the table / view / function definitions (I take no responsibilityfor the view definition!) are:CREATE TABLE [Summary_ReferrerSales] ([DateCreated] [datetime] NULL ,[ReferrerID] [char] (2) NULL ,[ReferrerIDCount] [int] NULL ,[PUIDCount] [int] NULL ,[ReferrerDescription] [nchar] (100) NULL ,[TotalOrderValue] [numeric](18, 0) NULL ,[TotalOrderLines] [numeric](18, 0) NULL) ON [PRIMARY]CREATE VIEW dbo.vw_ReferrerPopularityASSELECT TOP 100 PERCENT COUNT(dbo.LogReferrerID.Referrer) ASReferrerIDCount,COUNT(DISTINCT dbo.LogReferrerID.PUID) AS PUIDCount,dbo.DateForGrouping(dbo.LogReferrerID.DateUsed)AS DateCreated,dbo.LogReferrerID.Referrer AS ReferrerID,dbo.LookupReferrerID.ReferrerDescriptionFROMdbo.LogReferrerID INNER JOIN dbo.LookupReferrerIDON dbo.LogReferrerID.Referrer = dbo.LookupReferrerID.ReferrerIDWHERE (dbo.LogReferrerID.DateUsed > CONVERT(DATETIME, '2003-09-0100:00:00', 102))GROUP BY dbo.LogReferrerID.Referrer,dbo.DateForGrouping(dbo.LogReferrerID.DateUsed),dbo.LookupReferrerID.ReferrerDescriptionHAVING (dbo.LogReferrerID.Referrer <> 'WS')AND (COUNT(dbo.LogReferrerID.Referrer) IS NOT NULL)AND (dbo.LookupReferrerID.ReferrerDescription IS NOT NULL)AND (dbo.DateForGrouping(dbo.LogReferrerID.DateUsed) >CONVERT(DATETIME, '2003-09-01 00:00:00', 102))AND (COUNT(DISTINCT dbo.LogReferrerID.PUID) IS NOT NULL)ORDER BY dbo.DateForGrouping(dbo.LogReferrerID.DateUsed) DESCCREATE TABLE [LogReferrerID] ([LogReferrerID] [int] NULL ,[Referrer] [varchar] (2) NULL ,[DateUsed] [smalldatetime] NULL ,[HTTPReferrer] [varchar] (1000) NULL ,[TargetURL] [varchar] (1000) NULL ,[QueryString] [varchar] (1000) NULL ,[PUID] [varchar] (50) NULL) ON [PRIMARY]CREATE TABLE [LookupReferrerID] ([ReferrerID] [char] (2) NOT NULL ,[ReferrerDescription] [varchar] (100) NOT NULL ,CONSTRAINT [PK_Lookup_ReferrerID] PRIMARY KEY CLUSTERED([ReferrerID]) ON [PRIMARY]) ON [PRIMARY]CREATE FUNCTION dbo.DateForGrouping (@RowDate datetime)RETURNS datetime ASBEGINdeclare @datestring char(10)set @datestring=cast(datepart(dd,@RowDate) as char(2)) + '/' +cast(datepart(mm,@RowDate) as char(2)) + '/' +cast(datepart(yyyy,@RowDate) as char(4))return cast(@datestring as datetime)END
View 3 Replies
View Related
Sep 18, 2007
The following error occurred but did not provide any additional info.
[DTS.Pipeline] Error: The PrimeOutput method on component "Pgrs - tr_hist" (14596) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
For this package I am trying to use DataDirect's ODBC driver for a Progress OpenEdge Database version 9.1E to move data to SQL Server 2005 in order to make use of SQL's BI suite. I have consulted the DataDirect and have that the driver is functioning properly. The driver works perfectly from another application. They suggest that the problem is in the the datareader's or the connection manager's implementation of the driver.
Please tell me what is the cause of this or at least how to troubleshoot this problem.
View 18 Replies
View Related
Oct 10, 2007
I am using SQL 2000 (SP4) and trying to save a DTS Package. When I do that it gives me an error:
Error Source : SQL OLE DB Provider
Error Description : Unspecified error
The package runs fine and I can change global variables, etc. But I just can't save it. Any help would be appreciated.
Thanks,
Amir
View 1 Replies
View Related
Jun 18, 1999
I have a number of test databases which were created from the same backup. Set up SQLMaint to run on them each night. SQL Maint seems to run clean on all of them, but on two the Scheduled Task shows "Failed". All tasks have been set up exactly the same.
Has anyone run into something like this?
Here's the output from the maintenance job for one of the failing db's:
Microsoft (R) SQLMaint Utility, Version 6.50.240
Copyright (C) Microsoft Corporation, 1995 - 1996
Logged on to SQL Server 'COSTGUARD2' as 'sa' (trusted)
Starting maintenance of database 'Test15' on Thu Jun 17 23:10:01 1999
[1] Check Data and Index Linkage...
** Execution Time: 0 hrs, 0 mins, 1 secs **
[2] Check Data and Index Allocation...
** Execution Time: 0 hrs, 0 mins, 2 secs **
[3] Check System Data...
** Execution Time: 0 hrs, 0 mins, 1 secs **
[4] Update Statistics...
** Execution Time: 0 hrs, 0 mins, 27 secs **
End of maintenance for database 'Test15' on Thu Jun 17 23:10:30 1999
SQLMAINT.EXE Process Exit Code: 0 (Success)
View 2 Replies
View Related
Feb 19, 2007
When I try to load an SSIS package via C# code I get the following error message:-
"The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails.
"
The code is pretty straightforward:-
Application app = new Application();
PackageEvents evts = new PackageEvents();
Package pkg = new Package();
Package pkg = app.LoadPackage("C:\Documents and Settings\dominic_s\My Documents\Visual Studio 2005\Projects\SSIS_Util\bin\Debug\DTS\Cleanup_Staging.dtsx",evts,true);
return pkg;
What's interesting is this error message only appear's when I Start Debugging (F5 in VS 2005). If I Start without Debuggging (CTRL+F5) I dont get this error message. I've tried almost everthing suggested by other posts in this forum related to the same issue but nothing seems to work.
Any help will be greatly appreciate...thanks!!!
View 4 Replies
View Related
Jul 17, 2007
Good day all,
I am having an interesting SSIS problem where the package fails to load with the following error message:
Code: 0xC0010018
Source: {BE86A659-AB44-403A-9C89-3524821879E0}
Description: Error loading value "" DTS:Name="SqlStatementSource">"Select dbo.fnGetLastOpenExtract('" + @[User::in_ExtractName] + "') as eh_ID"" from node "DTS: PropertyExpression".
This very same package runs on our test server, but fails to even load on UAT server.
SSIS packages are the same on both Test and UAT servers (I compared not just dates and sizes - they are literally the same: byte-to-byte)
DTExec version is 9.00.3042.00 on both servers.
HKLMSOFTWAREMicrosoftMicrosoft SQL Server90DTSSetupVersion = 9.2.3042.00 on both machines.
This started to happen when the UAT machine was upgraded to Service Pack 2 of SQL Server 2005. Please note that the UAT server only runs SSIS packages and does not have SQL 2005 database engine installed. There is, however, an older installation of SQL Server 2000 on UAT machine (I am not sure if Test machine has it - will check tomorrow).
Any help is greatly appreciated.
Thanks,
Alex
Here is the compete output from DTExec:
Code Snippet
D:AM5Jobs>"C:Program FilesMicrosoft SQL Server90DTSBinnDTExec.exe" /File "D:ExtractsGBG_ExtractSSISImport_ExtractStartComplete_03.dtsx" /Checkp OFF /Cons MT /Set Package.Variables[User::in_ExtractName].Properties[Value];SagittaMapping_Replication /Set Package.Variables[User::in_StartComplete].Properties[Value];Start
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 12:33:21 PM
Error: 2007-07-17 12:34:52.98
Code: 0xC0010018
Source: {BE86A659-AB44-403A-9C89-3524821879E0}
Description: Error loading value "<DTS:PropertyExpression xmlns:DTS="www.microsoft.com/SqlServer/Dts" DTS:Name="SqlStatementSource">"Select dbo.fnGetLastOpenExtract('" + @[User::in_ExtractName] + "') as eh_ID"</DTS:PropertyExpression>" from node "DTS:PropertyExpression".
End Error
Error: 2007-07-17 12:34:52.98
Code: 0xC0010018
Source: {BE86A659-AB44-403A-9C89-3524821879E0}
Description: Error loading a task. The contact information for the task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server v9; ? 2004 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". This happens when loading a task fails.
End Error
Error: 2007-07-17 12:34:52.98
Code: 0xC0010021
Source:
Description: Element "{1c66489c-2a3f-4c8a-b9e7-0161875427a2}" does not exist in collection "Executables".
End Error
Error: 2007-07-17 12:34:52.98
Code: 0xC0010018
Source:
Description: Error loading value "<DTS:Executable xmlns:DTS="www.microsoft.com/SqlServer/Dts" IDREF="{1c66489c-2a3f-4c8a-b9e7-0161875427a2}" DTS:IsFrom="-1"/>" from node "DTS:Executable".
End Error
Error: 2007-07-17 12:34:52.98
Code: 0xC0010018
Source:
Description: Error loading value "<DTS:PrecedenceConstraint xmlns:DTS="www.microsoft.com/SqlServer/Dts"><DTS:Property DTS:Name="Value">0</DTS:Property><DTS:Property DTS:Name="EvalOp">2</DTS:Property><DTS:Property DTS:Name="LogicalAnd">-1</DTS:Property><DTS:Property DTS:Name="Expression"></" from node "DTS:PrecedenceConstraint".
End Error
Could not load package "D:ExtractsGBG_ExtractSSISImport_ExtractStartComplete_03.dtsx" because of error 0xC0010014.
Description: The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails.
Source:
Started: 12:33:21 PM
Finished: 12:34:53 PM
Elapsed: 91.938 seconds
View 7 Replies
View Related
Sep 26, 2007
I'm working with an existing package that uses the fuzzy lookup transform. The package is currently working; however, I need to add some columns to the lookup columns from the reference table that is being used.
It seems that I am hitting a memory threshold of some sort, as when I add 3 or 4 columns, the package works, but when I add 5 columns, the fuzzy lookup transform fails pre-execute:
Pre-Execute
Taking a snapshot of the reference table
Taking a snapshot of the reference table
Building Fuzzy Match Index
component "Fuzzy Lookup Existing Member" (8351) failed the pre-execute phase and returned error code 0x8007007A.
These errors occur regardless of what columns I am attempting to add to the lookup list.
I have tried setting the MaxMemoryUsage custom property of the transform to 0, and to explicit values that should be much more than enough to hold the fuzzy match index (the reference table is only about 3000 rows, and the entire table is stored in less than 2MB of disk space.
Any ideas on what else could be causing this?
View 4 Replies
View Related
Jun 11, 2007
I did a small package with only one ODBC connection (Merant 3.70 32-Bit Progess). This package runs well in Visual Studio and fails when runs by SQL Server Agent.
Configuration:
SQL Server Agent on a 32Bit server.
The ODBC connection configuration in available on System DSN on this server.
The user of Server Agent have full access (Admin).
Connect Manager Provider: ".Net ProvidersOdbc Data Provider"
SQL Server version: 9.0.3042
Error Message:
Executed as user: TEKCON cadmin. ...ion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 16:50:33 Error: 2007-06-11 16:50:33.62 Code: 0xC0047062 Source: Data Flow Task DataReader Source [1] Description: System.Data.Odbc.OdbcException: ERROR [HYC00] [MERANT][ODBC PROGRESS driver]Optional feature not implemented. ERROR [HY000] [MERANT][ODBC PROGRESS driver]msgOpen: unable to open message file: PROMSGS ERROR [IM006] [MERANT][ODBC PROGRESS driver]Driver's SQLSetConnectAttr failed. ERROR [HYC00] [MERANT][ODBC PROGRESS driver]Optional feature not implemented. ERROR [HY000] [MERANT][ODBC PROGRESS driver]msgOpen: unable to open message file: PROMSGS ERROR [IM006] [MERANT][ODBC PROGRESS driver]Driver's SQLSetConnectAttr failed. at System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) at System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcCon... The package execution fa... The step failed.
I created a .bat file with this instruction and It's run well:
dtexec /f "C:Program FilesMicrosoft SQL Server90DTSPackagesIntegration Services Project estcom.dtsx"
pause
Why it's not running with SQL Server Agent???
View 7 Replies
View Related
Aug 22, 2007
Hi,
I have a package in which i have programatically created dataflow task. It used to work fine but now it fails with series of errors out of which one is below
Error 30002: Type 'MainPipe' is not defined. Line 63 Columns 33-40 Line Text: Dim DataFlowTask As MainPipe = CType(DataFlowTaskHost.InnerObject, MainPipe)
It seems all the function and classes referd from following dlls is not working:
Microsoft.SqlServer.DTSRuntimeWrap.dll
Microsoft.SqlServer.DTSPipelineWrap.dll
I say so because i get the following error also:
Error 30652: Reference required to assembly 'Microsoft.SqlServer.DTSRuntimeWrap, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' containing the type 'Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager90'. Add one to your project. Line 86 Columns 33-64 Line Text: DtsConvert.ToConnectionManager90(ChildPackage.Connections(""Source"")) These dlls are in GAC and in C:Program FilesMicrosoft SQL Server90SDKAssemblies with same version but still it gives above error.
Thanks
Mohit
View 11 Replies
View Related
Aug 30, 2006
Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
Thank you
Tej
View 7 Replies
View Related
May 28, 2007
Hi,
I am trying to use a lookup in a package and check for some conditions. On the advanced tab, I am trying to modify the condition from = to <=. But the same doesnt work when the target is on oracle, but the same works fine on SQL Server and DB2.
Any idea regarding the same?
Thanks,
Manish Singh
View 3 Replies
View Related
Sep 15, 1999
I have created a package that takes a Visual FoxPro .dbf and imports into SQL7. If I run the job, it works fine. If I schedule the job it fails stating that I can't find the .dbf, the same one that it just found when run manually. What gives?
View 1 Replies
View Related
May 11, 2000
I have a Local DTS Package that I created that runs fine. I have scheduled it to run daily but it errors out when run it from the agent. This is an excerpt of the error from the Job history.
Delete from Table [Intranet].[dbo].[Employees] Step, Error = -2147217887 (80040E21)
This Local DTS Package, deletes the records in the file and reimports the data from an AS400 file that is recreated for me daily.
The only thing that has occured to me so far is that perhaps the SQL Agent Service Account needs permission to delete the records. (I'm using NT Security).
Am I on the right track or do you think it's something else?
View 1 Replies
View Related
Sep 18, 2007
Hello,
I have a package which runs several child packages. All works well and everything runs, but when it runs each of the children packages, it opens it, runs it and then it stays open. When the whole thing is done, there are about 25 or so open packages. Should they close after they run? Is there a setting I need to do this?
The point I am in SSIS is that I have gotten a decent feel for creating packages, but everything is still in debug mode. I need to take the next step to learn how to have this stuff run automatically or from a procedure outside the SSIS interface. Does that make any sense? If so, where can I learn about that.
Thanks for the help.
-Gumbatman
View 3 Replies
View Related
