Lookup Transformation
Mar 27, 2006
Hi Everyone,
I'm trying to perform a lookup transformation. But the deal is, I have this one value that I am passing into the transformation, but I would like to gather all values that match the value I put in....does the lookup transformation do this? I tried it, and it appears as if it only returns one value for the one input. After the lookup, I have an access OLE DB destination setup...so I can capture all those values that corresponds to that one value I passed into the lookup. Does anyone have any ideas on how I can go about this?
Thanks!
View 1 Replies
ADVERTISEMENT
Aug 1, 2007
Hi All,
I am doing something really simple and it doesnt work, may be I am missing something, What I am trying to accomplish is to load a fact table using lookup transaformation, however my source data was different from the data in my dimension (or the datatype ) I had to use a data conversion task before my lookup , so the data flow is something like this source -> Data Conversion -> Lookup -> destination , I am getting an error at my lookup task where it says the "[Lookup [82]] Error: Row yielded no match during lookup". and then it just fails. I know for sure that there has to be matching data. donno what is it that I am missing.
Thanks
View 10 Replies
View Related
Jan 8, 2007
Is there a way to ignore the unmatched rows using Lookup without creating another destination (Error Transformation for red connector)?
View 5 Replies
View Related
Nov 27, 2007
Hi,
I am totally new to SSIS.
I need an example of how to use a Lookup transformation. Basd on that i need to lookup for some recs and delete records from transaction table. I have used the Execute SQL task for this and i am able to achive my requirement. But now i am using XML configurations for Connection Managers and for that very reason i dont want to hard code the catalog names(database names) inside my Execute SQL task.
Can any one suggest me how to do the same using a Lookup transformation or any other.
Any suggestions will be greatly appreciated.
Thank Q,
priya
View 3 Replies
View Related
Dec 24, 2007
Hi,
I have a Dataflow task which loads data from a flat file to a Fact table named Inventory , doing a dimensional Key lookup with DIMStores - which is the dimension table for stores information.
If I have some rows in the flatfile whose 'Store' column doesnt have a corresponsing key in the DIMStores table, I want to insert all these stores in to DIMStores table and then update the Inventory table accordingly ..
Any idea how do to this ?
Thanks in Advance,
Sun
View 3 Replies
View Related
Feb 27, 2008
I have a question based on Lookup Transformation component. If using Lookup component, the data cannot be NULL for available columns mapping. How about I want to keep the NULL value like outer join instead of inner join? Is there any way to do since I have several Lookup components inside of my dataflow?
View 5 Replies
View Related
May 11, 2000
I have a question. I'm using a lookup table which contains descriptions for a field from one of my tables. I have added a lookup query that looks like this:
SELECT STORE_DESRIP, BANNER, STORE_ID
FROM `stores.txt`
WHERE (STORE_ID = ?)
My main table (stagging) contains the store_id field. What I want to do is populate my destination fields (Store_descriptin and Banner) from the lookup table, based on the Store_id. I have written an ActiveX script that looks like this:
Function Main()
DTSDestination("Store_id") = DTSSource("store_id")
DTSDestination("Store_description") = DTSLookup("storelookup").Execute(DTSSource("store_ id")).value
Main = DTSTransformStat_OK
End Function
I receive an error when I try to test this script. It complains about line 8, which is the line that contains the DTSLookup function. Does anyone have any ideas what I'm doing wrong?
The process I see here is that when it comes to populating the "Store_description" field is will look the lookup table and based on the store_id, pass the description back. I would also like to add another destination field into this script, but won't until I resolve this.
Thanks for yoour support.
View 1 Replies
View Related
Nov 8, 2006
Hello,
I have a table like this:
Customer
Group
A
10
B
20
I need to do a translation of "group" to €ślocal group€?:
Customer
Group
Local Group
A
10
11
B
20
21
When a match is found, the group code should be replaced by the local group code ... but, when no match is found the group code should stay.
Is there any way to do this using Lookup ? I tried but when you set the error output to ignore it replaces the value that has no match with a NULL value. Maybe there is another way to get this done with or without the lookup component ?
View 5 Replies
View Related
Mar 31, 2008
I have a lookup transformation that retrieves a key for a certain column of values, in this case, a name. So, I go in to the lookup table with a name and come out with its key. I had it working and then I added new entries to the lookup table for a bunch of new names. Now, for some reason, I am not getting the matches for the new names. But I am still getting the matches for the names that existed before I added the new ones.
I'm wondering if the lookup transformation is using the old set of data and some how not picking up the new names. Do I have to trigger something in the lookup transformation to let it know that the lookup table data has changed?
View 4 Replies
View Related
Sep 21, 2006
Hello all,
I needed to lookup some table values based on a join of two fields...
I've configured the lookup transform to get the values via a SQL statement to minimize loading time.
However, when creating the relationships between the input columns and the lookup columns I receive following error:
input column [BATCH_ID] has a datatype which cannot be joined on
I've checked both input and lookup columns, both are of type DT_R8... Both columns in the different tables do have the same datatypes
Any idea how to solve this problem??
Thanks in advance
View 5 Replies
View Related
Oct 16, 2007
How to compare NULL to NULL in Lookup transformation?
I have a column (key) that has NULL value
and In my look up table, i assign NULL to -1, so i can get -1 when I join key to CD ( in lookup) ...
Num CD
-1 NULL
1 12
2 56
but when i run my package I keep getting no matching record.. i thnk it;s because of NULL value...
how can I resolve this?
View 6 Replies
View Related
Dec 10, 2007
I've been going round in circles trying to understand what design I should use for a particular transformation/lookup problem I have. Would appreciate a few pointers.
On the data flow, I can create the data source easily with a SQL Query that returns 4 columns...
eg. myDb.dbo.Table1
Col1,
Col2,
Col3,
Col4
The end result at the Destination is:-
myDb.dbo.Table2
Col1,
Col5
Table1.Col1 maps directly to Table2.Col1 -- easy
Table2.Col5 is a result of a lookup query to different tables in the same db based on the value of Table1.Col1, Table1.Col2 & Table1.Col3.
I've already had problems with the Lookup component that forced me to give up using it because it wouldn't adequately support parameters. I was forced to use the Script component instead. However, this problem is a bit different because I don't need to try and reference variables as parameters and, instead, I need to use the values from the source query (Col1, Col2 & Col3).
Suggestions?
Thanks in advance,
Clive
View 2 Replies
View Related
Jul 2, 2007
Hi,
There is one data flow task in the package. I have a column in the input set called "ID". The total number of rows in the input set is > 50000.
There is one table in the database which has the description for all the IDs. I need to get the "Description" value from the database for each row. The table contains nearly 12 lack records.
For that I am using lookup transformation. In lookup, I specified the query and column mapping and I got the new column "Description".
Here is the problem.
while running the package, the lookup is getting all the 12 lack rows from table and then it is matching the rows.
It is taking huge time.
Can any one suggest me how to improve the performance of this situation?
Thanks in advance.
View 5 Replies
View Related
Oct 22, 2007
Hi all
when using advanced tab in lookup transformation ?, for whatany suggest i will be appreciated , thanks in advance
View 4 Replies
View Related
Mar 6, 2007
Hi,
I just wanted to know if there is any way to Allow Null values while doing a lookup on a table in SSIS.
Let me elaborate the situation...
I have a flat file source that has a field called 'code'. I want to lookup in a code table to see if the code in the file is a valid code but the flat file may contain a NULL value as a 'code' (i.e. zero length string which treated as NULL by my package).
My problem is, the SSIS package tries to search for the NULL in the table and the lookup fails and an error is logged as per the business logic but actually NULL is also an acceptable value and the error should not be logged.
I tried inserting a NULL value in the lookup column but that doesn't work. I am not sure but I think I have read somewhere that two null values cannot be compared for equality. I cannot use conditional split to check the null value because I have to use a large number of lookups and a conditional split everywhere will mess up the things.
Is there any way to solve this problem?
View 6 Replies
View Related
Oct 15, 2007
I have the following query:
SELECT EMPID,EMPNAME from EMPLOYEE
where EMPID = (SELECT MAX(EMPID) from EMPLOYEE group by EMPNAME,insert_date)
Here one can use above query in Dataflow of SSIS and specify SQL to create temporary table and later can use as lookup to join to other table.
Is there any way in SSIS to directly do the MAX of EMPID in lookup and join to the main source table.
Any help is really appreciated.
Thanks.
View 3 Replies
View Related
Feb 21, 2008
I may have misunderstood how Lookupu works because it's not doing what I want.
From the OLTP datasource I have a long list of revenue items (from a SQL server database). I want to assign these to specific accounts as they are transferred into our accounting system. I have another table with a list of words to search for and which account they belong to.
For example if the OLTP source might be
Description - Amount
"Sales of cars"- "$20,000"
"Motorcycle sales" - "$15,000"
"Bike rentals" - "$2,000"
The account lookup table is like
Wordsearch - Account
"sale" - "ACCT_SAL"
"rental" - "ACCT_RENT"
So by looking up whether "wordsearch" is found in "desription" I should get an output of
ACCT_SAL - $20,000
ACCT_SAL - $15,000
ACCT_RENT - $2,000
Back in DTS I did this with an array and "If Instr" using VBScript in the Data Transformation Task. I'm sure there must be something in SSIS to do this - it should be something like a Fuzzy Lookup ?, but I'm drifting toward Script Component. Anyone got any ideas for SSIS
View 6 Replies
View Related
Nov 30, 2006
Hi,
Here is my problem for a lookup transformation:
I have an input flow with dates and fields like this :
ID BEGINNING_DATE ENDING_DATE
1 12/01/2006 12/16/2006
and a reference table like this:
ID PRICE BEGINNING_PRICE_DATE ENDING_PRICE_DATE
1 400 11/28/2006 12/03/2006
1 500 12/03/2006 12/06/2006
1 600 12/06/2006 12/09/2006
I have to get the intersection periods between the two tables joining on ID. I would like to have this result flow :
ID BEGINNING_DATE ENDING_DATE PRICE
1 12/01/2006 12/03/2006 400
1 12/03/2006 12/06/2006 500
1 12/06/2006 12/09/2006 600
I'm using a lookup transformation and modifying the SQL instruction in advanced tab like this:
select *
from
(select * from [dbo].[Price]) as refTable
where [refTable].[ID] = ?
and (? between [refTable].[BEGINNING_PRICE_DATE] and [refTable].[ENDING_PRICE_DATE]
or ? between [refTable].[BEGINNING_PRICE_DATE] and [refTable].[ENDING_PRICE_DATE]
or ([refTable].[BEGINNING_PRICE_DATE] between ? and ?
and [refTable].[ENDING_PRICE_DATE] between ? and ?))
In that case I have to define 7 parameters:
ID : parameter0
BEGINNING_DATE : parameter1, parameter3, parameter5
ENDING_DATE : parameter2, parameter4, parameter6
My problem is that the transformation looks for only one matching element and outputs 0 or 1 row per input row... In that case the 3 rows of my lookup table are matching with the row in my input table, but I have only the first one.
How could I do to resolve my problem?
Thanks... I hope it's clear...
Arnaud.
View 6 Replies
View Related
Mar 6, 2008
I used to use Lookup Transformation for my SSIS, now I am having problem and cannot find the problem. I have my source table, one lookup to join source column to my lookup column as L1. I then have another lookup to join L1 to L2, and will show L2. It seems not working. I used to have source to join several lookup and get different Li, not this one. Any help?
View 14 Replies
View Related
Jan 11, 2006
Has anyone else noticed this? I want to be able to use a paremter in my reference table of my Lookup Transformation. I couldn't find any way for the dialog to accept SQL with a parameter so I checked on MSDN How to: Implement a Lookup Using the Lookup Transformation and sure enough in the article is says to click on the Parameter button. I don't have a Parameters button on this dialog. Error? Is this possible?
6. In the Lookup Transformation Editor, on the Reference Table tab, select a connection manager in the Connection manager list, and then do one of the following:
Click Use a table or a view, and then select either a data source view, a data source reference, or an OLE DB connection manager.
Click Use results of an SQL query, and then build a query in the SQL Command window, or click Build Query to build a query using the graphical tools that the Query Builder provides. Alternatively, click Browse to import an SQL statement from a file.
If the query includes parameters, click Parameters to map parameters to variables. For more information, see How to: Map Query Parameters to Variables in Data Flow Components.
To validate the SQL query, click Parse Query.
To view a sample of the data that the query returns, click Preview.
View 10 Replies
View Related
Aug 27, 2007
I found that sometimes when the cache is filled up, the performance drops significantly. Anyone knows the caching strategy behind the Lookup Transformation?
If it's LRU or FIFO for example, I may have to sort the input based on FK to get better performance.
If it's frequency based then sort might not help.
Cheers,
View 1 Replies
View Related
Nov 3, 2006
Hi,
I have to perform a lookup in a table based on a query like:
"... where ? = [RefTable].fieldID and ? between [RefTable].AnotherFieldValue and [RefTable].AThirdFieldValue"
So, SSIS has put the CacheType to none. As I really need to speed up the job I want to set the CacheType to partial (full isn't an option due to the custom query I use here).
But here it comes: when using partial CacheType, one has to set the cache size manually - and I really don't know what value I should assign to it - is there a guideline on this topic?
I work on a Win2003 server platform with sql server 2005 - 2 processors - 2Gb Ram - enough disc space
Thanks in advance,
Tom
View 2 Replies
View Related
May 28, 2007
Hi,
I am trying to use a lookup in a package and check for some conditions. On the advanced tab, I am trying to modify the condition from = to <=. But the same doesnt work when the target is on oracle, but the same works fine on SQL Server and DB2.
Any idea regarding the same?
Thanks,
Manish Singh
View 3 Replies
View Related
May 13, 2006
below is the error message:
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Data Flow ACH Validate File and Header Info [Lookup ACH Batch Number [506]]: input column "ID" (571) and reference column named "BANKBATCHNBR" have incompatible data types.
"Lookup ACH Batch Number" is the name of the lookup transformation. input column "ID" has a string data type. reference column "BANKBATCHNBR" has a varchar(50) data type. can someone please tell me how i should go about debugging this validation error? thanks.
View 1 Replies
View Related
Aug 2, 2007
Hi Gurus,
I have a Dataflow Task which has an OLE DB Source calling a SP with parameters (?, ?). Then this OLE DB Source is conencted to a Lookup Transform which also calls a SP but on a different database. I am unable to figure out how to pass parameters in a Look up Transform.
In the 'Use Results of an SQL Query' pane of Lookup Transform:
Code SnippetEXEC GetMonthlyDataExtract 4, 2007
( I am passing month and year values) this works ok.
But when I chage to
Code SnippetEXEC GetMonthlyDataExtract ?, ?
It says EXEC not supported. Also I can not figure out how to configure parameters since 'Reference Table' Tab of the Lookup Transform does not have any option where we can attach variables to parameters.
Also I am interested to map parameters to variables not to input columns.
If mention if that is not possible or any other alternative.
Your help will be appreciated.
Thanks,
Paraclete
View 3 Replies
View Related
May 21, 2007
My lookup data is in a csv file, not a table. Is there a way to get the Lookup transformation to use the csv file as the source 'table'? Obviously the alternative is to load the file into a SQL Server table and use that, but I want to keep it simple if possible.
View 4 Replies
View Related
Dec 1, 2006
Hi to all!
i hope that You could help me, because i must build a release version of my SSIS package in 2 hours..
This is my big issue:
i've a SQL Server 2005 (SP1 64bit version) and a remote SQL Server 2000 (SP4)..
I've created a Data flow task that contains an OLEDB source (native client on SQL 2005 local server) and a Lookup Transformation that has to connect to remote SQL Server 2000 and returns me some columns..
I see all, tables, columns.. no problem at first sight.. I choose some columns to use in Lookup output and confirm..
When i re-open my lookup task, columns are not selected (checked)..
obviously my oledb destination can't see that cols..
I choose, but my SSIS don't store any cols in output..
I've tried using error output, advanced editor, creating another package with sql 2005 tables only.. but no change.. the same silent error.. i cant use the columns for output to add to my sets..
can you help me plz??
i extremely need you a lot!!!
thanx in advance..
View 3 Replies
View Related
Jul 13, 2006
Hi,
I need to perform a lookup based on a business key and a date in the source that must be between an effective from and effective to date in the reference table. I've been able to achieve this by updating the SQL caching command on the advanced tab but the performance is very slow. I have 6 lookups of this type in the data flow with a source SQL statement that returns approx 1 million rows and this package takes over 90 minutes to run.
The caching SQL command now looks like this
select * from
(select * from [ReferenceTable]) as refTable
where [refTable].[Key] = ? and ? BETWEEN [refTable].[StartDate] AND [refTable].[EndDate]
and I've set up the parameters so that the business key is the first parameter and the source date is the second.
I have another lookup in the flow that does a straight equality comparison using 2 columns and the Progress tab shows that this lookup is cached (even though I haven't enabled it on the Advanced tab of the transformation editor) but none of the other lookups (using the date) appear to be cached, even though I have enabled them to be.
Can anyone suggest how I can improve the performance?
Thanks.
View 2 Replies
View Related
Sep 1, 2006
Does anyone have a clue as to why DT_R4, DT_R8 are not allowed as join columns? This means I cannot join tables on AccountNumbers, InvoiceNumbers, etc. What a pain...
View 3 Replies
View Related
Feb 22, 2008
Hello,
I am using the lookup transformation. I made a change on reference view, but I can't seem to get the transformation to recognize the fact that the underlying table has changed.
Is this possible? Surely you don't have to redo the entire lookup task in order to caputre a new column that is added onto a table / view.
Chris
View 4 Replies
View Related
Jun 28, 2006
Hi,
Can you please tell me the way to configure the LOOK UP transformation so that it will ignore all the null values ? I want to configure a Look up component for the column "Col1" as follows
All the NULL values of Col1 should not be considered for look-up process. They should be passed to the downstream component as valid rows.
All NOT NULL values of Col1 should be processed by the Look up component.
If there is no matching value present for any NOT NULL value of Col1 then it should be directed to error output.
Regards,
Gopi
View 3 Replies
View Related
Feb 6, 2006
Hello,
I searched around and not been able to find any guidance on this question: if I am designing a lookup transformation, how do I decide what I should set the cache size to?
For the transformation on which I am currently working, the size of the lookup table will be small (like a dozen rows), so should I just reduce it to 1MB? Or should I not even bother with caching for a lookup table that small?
Hypothetically speaking, if I am working with much larger lookups in the future (let's say 30,000 rows in the lookup table), is there some methor or formula that I should use to try to figure out the best cache size?
If the cache size is set larger than the actual data being cached, is the entire cache size allocated in memory, or is the cache size managed to only be as large as it needs to be? In other words, is the cache size a maximum to which the cache will grow, or is it a preset that sets the cache for that lookup to exactly the specified size?
Thanks,
Dan Read
SSIS Blogging
View 4 Replies
View Related
Jan 9, 2008
How would you do the following in SSIS?
SELECT a.TestID,
a.TestCode
FROM TableA a
WHERE UPPER(RTRIM(a.TestCode)) IN SELECT (SELECT UPPER(RTRIM(b.TestCode)) FROM TableB b)
Of course the above query is missing a few things but with ETL the where clause UPPER(RTRIM does not appear to be something that has an object or property that I can use in the Lookup.
Please correct and educate me.
View 4 Replies
View Related
