MDX Query To Display No Records For Empty Rows
Jan 9, 2007
Hi,
I am facing with the following problem.
I am using bar chart to display my report.
My MDX query is as follows:
SELECT
NON EMPTY { [Measures].[SUM_COUNT] } ON COLUMNS,
TopCount ( Filter ( {[DIM].[NAME].[NAME]}, [Measures].[SUM_COUNT] <> 0 ) , 10, [Measures].[SUM_COUNT] ) ON ROWS
FROM
[USAGE]
where <criteria>
I want to show the topmost 10 records. For some criteria I get the results in the chart.
But for some criteria or say for wrong criteria, there are no records. In such a case the X-axis contains all values for {[DIM].[NAME].[NAME] and value for the Y-axis is all 0. Its kind of blank report it will restrict to 10 records.
In such a scenario I want to show a message to the user saying "No records found", which I have set in the No Rows property of the chart.
If I remove the TopCount clause then I get the above message, which is obvious.
So how do I acheive the same message but at the same time limiting the records to 10?
How can I acheive this in my scenario? Can something be done at the query end?
any help is appreciated.
Thanks in advance!
View 3 Replies
ADVERTISEMENT
Aug 30, 2004
I am wanting to make a query to find out if there are any columns in a table that are null for all records.
So far I am using a cursor that holds all the column names of that table and then a stored procedure that would use a loop to cycle through all the column names in a query to essentially count the number of nulls for each column and then an If statement to check to see if the #of nulls = to the number of records.
What isn't working is my query to count the number of nulls...Here is my query
select count(*)
from XYZ
where @cName is null
Ive tried declaring cName as a sysname, and varchar, neither work.
Also, I've tried using COL_NAME(OBJECT_ID('XYZ'), someColumnIndx)...I think this would be the better choice just because I wouldn't need to use a cursor, but both aren't working.
I am a bit new to MSSQL and don't know my way around the system tables. Is there a sys table that would give me this info so I wouldn't need to perform a query?
Any info would be great.
View 4 Replies
View Related
Feb 11, 2005
Hello,
I have two tables, Promotion and Promolocation. The Promotion table is used to set up promotions or sales, and consists of a PromoID, StartDate, and EndDate. Each PromoID is referenced in the Promolocation table, which is used to assign items to a promotion for various locations or stores. The Promolocation table consists of PromoID, LocID, SkuID, PromoPrice, and DiscLevel.
There are times where an item or SkuID will exist in more than one promotion, however, our application is currently not intelligent enough to determine which promotion to use, so it sets the active promotion based on the StartDate being before other promotions' StartDate and the EndDate being after other promotions' EndDate.
I want to find all promoid's where a sku exists in more than one promotion. I want to signify which promotion is active, using 1 as the first active promotion, 2 as the next active, 3 as the next, etc. To determine which promotion is the first active promotion, the StartDate must be before any of the other promotions' StartDate, and the EndDate must be after other promotions' EndDate. If the promotions' StartDate is after the other promotions' StartDate but not before the other promotions' EndDate, and the EndDate is before or on other promotions' EndDate, then that's the second active promotion. If the StartDate is the same as other promotions' StartDate, but the EndDate is before other promotions' EndDate, then that's the third active promotion.
For example:
PromoID StartDate EndDate
------- --------- -------
PROMO1 1/1/2004 1/1/2006 (1st Active Promotion)
PROMO2 2/1/2004 1/1/2006 (2nd Active Promotion)
PROMO3 1/1/2004 12/1/2005 (3rd Active Promotion)
Here's a query I am using to display all active promotions:
select
pl.promoid,
pr.startdate,
pr.enddate,
pl.locid,
pl.skuid,
pl.promoprice,
pl.disclevel
from
promolocation pl
inner join
promotion pr
on
pl.promoid = pr.promoid
where
pr.enddate >= getdate()
Thanks for your help.
D
View 4 Replies
View Related
May 11, 2015
I have a column in the table which contains below values
Range
XXXX100
xxxx101
xxxx102
...
xxxx1020
below values are strings. I tried using below query but it does not return all values in the range.
Select * from table where Range Between 'XXXX100' AND 'xxxx1020'
May be in need to extract the number to display the values in given range.
View 4 Replies
View Related
Jul 23, 2005
I have a new installation of SQL Server 2000 Dev Edition on a Win2K3 Standard Edition Server that I used for development. I just set this machine up in th last week and installed all Win2K3 patches and then installed SQL2K and SP3a. I have a single named instance. I just noticed today that I cannot view table data or use the Query part of EM. When I right click a table and select Open Table->Return All Rows it gives me an error dialog "An unexpected error happened during this operation". While the EM is diplaying this dialog the EM screen looks like Internet Explorer and says "Action Canceled - You might not have permission to view this directory or page using the credentials you supplied." I believe that this is a EM issue as I cannot view table content on other remote server. ANy ideas? Might this be an IE security patch disallowing some connectivity ?--Frank--Message posted via http://www.sqlmonster.com
View 1 Replies
View Related
Jul 23, 2005
I'm using the query desinger in ASP.NET , however the number of recordsin the resultset are not displaying, so I cut and paste it into Queryanalyzer which is silly.How do I set this in the output window, or result grid?Thanks Moe
View 1 Replies
View Related
Oct 6, 2005
Good day!
I just can't figure out how I can display only the top record for the duplicate records in my table.
Example:
Table1
Code Date
01 10/1/05
01 10/2/05
01 10/3/05
02 9/9/05
02 9/9/05
02 9/10/05
My desired result would be:
Table1
Code Date
01 10/1/05
02 9/9/05
Thanks.
View 12 Replies
View Related
Oct 8, 2015
Im trying to get query by selecting the month from dropdownlist and display the records .by using the below query I need to enter the date in tecxtboc then it will show the output
select Standard, Total, MonthName
from (SELECT Standard, COUNT(Standard) AS Total,
datename(month, ReportDate) as [MonthName]
FROM CPTable where
ReportDate >= @ReportDate
[Code] .....
View 5 Replies
View Related
Nov 2, 2006
Hello
Im searching for a solution to set all matrix row or cell the same height.
it schoud looks like this example:
This is a simple matrix
test a
text b
text c
text d
text e
text f
text g
This is a matrix with all the same row-height.
test a
text b
.
text c
.
.
text d
text e
text f
text g
.
.
Thx you a lot
View 3 Replies
View Related
Sep 7, 2015
declare @table table (
ParentID INT,
ChildID INT,
Value float
)
INSERT INTO @table
SELECT 1,1,1.2
[code]....
This case ParentID - Child 1 ,1 & 2,2 and 3,3 records are called as parent where as null , 1 is child whoose parent is 1 similarly null,2 records are child whoose parent is 2 , .....
Now my requirement is to display parent records with value ascending and display next child records to the corresponding parent and parent records are sorted ascending
--Final output should be
PatentID ChildID VALUE
33 1.12
null3 56.7
null3 43.6
11 1.2
null1 4.8
null1 4.6
22 1.8
null1 1.4
View 2 Replies
View Related
Apr 24, 2015
Is there a way to display a friendly message if a sub-report does not have content ex "No additional products available"...
View 2 Replies
View Related
Jul 5, 2006
I'm currently running the following statement that is used in a CrystalReport. Basically, a record is returned when the T_PAYMENT.amounthas a record in the database based on the value of the T_MULTILIST.codefield. Currently, if there is no record returned, there is no listingin the report for the given T_MULTILIST.code.The user now wants a record to be displayed on the report when there isno record in the database - she wants it to display a value of '$0'for the given T_MULTILIST.code record. I tried to explain the fact thatis not possible the way things stand at the moment. Basically I needsome typeof case statement that says 'if there is no record returned, create asingle record and set T_PAYMENT.amount = 0' AFTER each query has beenexecuted.Anyone have any idea how to accomplish this?SELECT DISTINCT'English Language Arts, Grade 1' as Rec_Type, 'English Language Arts(Consumable)' as Super_Type, '' as Other_Type, 'Continuing Contracts'as Proc_Type,T_MULTILIST_GRADE.grade, T_MULTILIST.description, T_MULTILIST.code,T_PAYMENT.amountFROM (T_MULTILIST T_MULTILIST INNER JOIN (T_PAYMENT T_PAYMENTINNER JOIN T_SHIPPING_DETAILT_SHIPPING_DETAIL ONT_PAYMENT.transaction_id=T_SHIPPING_DETAIL.transac tion_id)ON T_MULTILIST.code=T_SHIPPING_DETAIL.multilist_code) INNER JOINT_MULTILIST_GRADE T_MULTILIST_GRADE ONT_MULTILIST.code=T_MULTILIST_GRADE.multilist_code, T_ORDER, T_REQUISITION, T_REQUISITION_DETAILWHERET_ORDER.id = T_SHIPPING_DETAIL.order_id ANDT_REQUISITION.id = T_ORDER.requisition_id ANDT_REQUISITION_DETAIL.requisition_id = T_REQUISITION.id ANDT_REQUISITION_DETAIL.latest_record_flag = 1 ANDT_REQUISITION.latest_record_flag = 1 ANDT_ORDER.latest_record_flag = 1AND (T_MULTILIST.code='1040')AND (T_MULTILIST.expiration_year >= '2006' )AND (T_REQUISITION.requested_shipment_date >= '2006' + '0601'AND T_REQUISITION.requested_shipment_date < dateadd(YY, 1,'2006' + '0601' ) )UNIONSELECT DISTINCT'English Language Arts, Kindergarten' as Rec_Type, 'EnglishLanguage Arts (Consumable)' as Super_Type,'' as Other_Type, 'Continuing Contracts' as Proc_Type,T_MULTILIST_GRADE.grade, T_MULTILIST.description,T_MULTILIST.code, T_PAYMENT.amountFROM (T_MULTILIST T_MULTILIST INNER JOIN (T_PAYMENT T_PAYMENTINNER JOIN T_SHIPPING_DETAIL T_SHIPPING_DETAILON T_PAYMENT.transaction_id=T_SHIPPING_DETAIL.transac tion_id)ON T_MULTILIST.code=T_SHIPPING_DETAIL.multilist_code) INNER JOINT_MULTILIST_GRADE T_MULTILIST_GRADE ONT_MULTILIST.code=T_MULTILIST_GRADE.multilist_code, T_ORDER, T_REQUISITION, T_REQUISITION_DETAILWHERET_ORDER.id = T_SHIPPING_DETAIL.order_id ANDT_REQUISITION.id = T_ORDER.requisition_id ANDT_REQUISITION_DETAIL.requisition_id = T_REQUISITION.id ANDT_REQUISITION_DETAIL.latest_record_flag = 1 ANDT_REQUISITION.latest_record_flag = 1 ANDT_ORDER.latest_record_flag = 1AND (T_MULTILIST.code='0040')and (T_MULTILIST.expiration_year >= '2006' )AND (T_REQUISITION.requested_shipment_date >= '2006' + '0601'AND T_REQUISITION.requested_shipment_date < dateadd(YY, 1,'2006' + '0601' ) )Up to 40 more UNION statements follow the above 2.
View 3 Replies
View Related
Jul 20, 2005
In Access I have a macro that, each night, takes a table with aprimary key defined in it, and deletes all the rows. Then itimports/appends records from a fixed width text file. In this way,since the table is not deleted and recreated, the primary key is keptintact.What would be the equivalent SQL method for doing this in an automatedway? I've tried letting DTS import the table from Access, but theprimary key is lost. Is there some way to "empty" a table instead ofdropping it, and then append new records so that the table will end uphaving the primary key I want it to have?Thanks.Larry- - - - - - - - - - - - - - - - - -"Forget it, Jake. It's Chinatown."
View 4 Replies
View Related
Dec 5, 2007
How to pull null (empty) records from SQL database,
what query am I suppose to use to get result
help me
thank you
maxs
View 4 Replies
View Related
May 7, 2007
Good day,
I just like to ask if anybody has experienced getting empty rows from SQL data adapter? I'm using SQL Server 2005. Problem is when the sql is run on Query Analyzer it retrieves a number of rows but when used in my application it returns 0 or empty rows.
I thought the connection is not the problem since I got my columns right. Below is my code snippet.
Thanks!
const string COMMAND_TEXT = @"select distinct somefield as matchcode, count(somefield) "
+ "as recordcount from filteredaccount where StateCode = 0 group by somefield having count(somefield) > 1";
SqlDataAdapter adapter = new SqlDataAdapter(COMMAND_TEXT, connection);
DataTable dt = new DataTable(sometablename);
adapter.Fill(dt);
View 13 Replies
View Related
Mar 3, 2008
When i try to insert new rows using SSIS into an emty table in my database, SSIS freezes. The same happens when i use a lookup on an empty table.
The only solution i have found is to manualy insert a row and remove it afterwards. When i have done this SSIS works without a glitch.
I start off by taking a script of a existing database and applying this script on a new database. So that i create an empty duplicate of my current database.
Any ideas why SSIS freezes? Do i have to initialize something first in my database? It is really annoying that i have to insert a row and delete a row into every table i want to use.
View 9 Replies
View Related
Nov 5, 2007
How do I go about iterating through every table in my database and empty each table so they contain no data?
I don't want to drop the tables and re-create them either.
Thanks.
View 6 Replies
View Related
Mar 3, 2008
Hi all I am having some issues in selecting items from my database where the record is NOT NULL. I have the code below however although some fields do contain soem data in it, others are blank which I believe are empty spaces. How do I do a SELECT command which ignores empty spaces and NULLS?
Code Snippet
SELECT CustomSearch FROM OfficesTable WHERE CustomSearch IS NOT NULL
Thanks, Onam.
View 10 Replies
View Related
Mar 1, 2004
Hi Everyone,
I am using a DTS package where one of the inputs is an Excel Sheet. Actually this sheet is updated manually whenever required i.e once a week or sometimes once a month, but the DTS package runs everyday.
Whenever new rows are added or deleted manually in the excel sheet, empty rows are showed in the sheet after the last row of data. This hinders the DTS package, because the destination table to which the data in the Excel sheet is sent has Primary keys in it.
Can anyone suggest me how to avoid getting the empty spaces in the excel sheet.
Thanks in advance.
Regards,
kalyan
View 3 Replies
View Related
Aug 18, 2007
Hi, is there a way I can check if a table is empty and contains norows?I have a Table1 which being dynamic can sometimes end up with nowcolumns what so ever. I'm using Table1 in one of my views along with 2other tables and I would like put a condition at the...something likeAND Table1 IS NOTEMPTYIs there a way to do this in MS SQL?Many thanksYas
View 7 Replies
View Related
Nov 19, 2007
I have had at least 2 occurences of a DFT OLEDB source returning the correct number of rows but all rows are empty (they contain zeros or ''). This has happened in two different places in different SSIS packages within an ETL task. In one case the source was on a different server running SQLServer and in the other it was a different database on the same server as the SSIS package. This occured running on different servers, one with SQL 2005 SP2 and the other without. Both are 64 bit AMD systems running 64 bit SQL 2005. As there is a derived column transformation that has performed the derivation on the blank columns I assume the problem is with the OLEDB source but it could be with the data stream from the OLEDB source to to whatever follows. Has anyone else had this problem and does anyone know of a fix?
View 7 Replies
View Related
Mar 20, 2014
writing the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
ID effdate termdate
556868 1999-01-01 1999-06-30
556868 1999-07-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-01-31
556872 2004-02-01 2004-02-29
output should be ......
ID effdate termdate
556868 1999-01-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-02-29
View 0 Replies
View Related
Oct 16, 2006
A SQL Server 2005 stored procedure expects a parameter UserID depending upon which it retrieves the no. of records & OrderIDs corresponding to the UserID from a DB table (note that OrderID & UserID are two of the columns in the DB table). So for e.g. consider a user whose UserID=6 & the DB table has 3 records where UserID=6. In other words, there are 3 OrderID records of the user whose UserID=6, say, OrderID=8, OrderID=17 & OrderID=29. The stored procedure will finally return 2 columns - the OrderCount (which is 3 for UserID=6) & the OrderID (which will be 8, 17 & 29 for UserID=6). This is the stored procedure:ALTER PROCEDURE dbo.OrderCount @UserID intASDECLARE @OrderCount intSET @OrderCount = (SELECT COUNT(OrderID) FROM NETOrders WHERE UserID= @UserID)SELECT @OrderCount AS OrderCount, OrderIDFROMNETOrdersWHEREUserID = @UserIDIn a VB class file, I am invoking the stored procedure in a function named GetOrderCount which returns a SqlDataReader back to the calling ASPX page. I want the ASPX page to display the 3 OrderIDs of UserID=6 in a Label control. Unlike the DataBinding controls like DataList, DataGrid, Repeater controls, the Label control will not automatically loop through the recordset. So I tried to accomplish this using a For....Next loopDim i As IntegerDim sqlReader As SqlDataReaderiUserID = Request.Cookies("UserID").Value'ShopCart is the name of the class in the VB class fileboShopCart = New ShopCartsqlReader = boShopCart.GetOrderCount(iUserID)While (sqlReader.Read) If (sqlReader.GetValue(0) > 1) Then pnlLinks.Visible = True For i = 1 To sqlReader.GetValue(0) lblLinks.Text = sqlReader.GetValue(1)(i) Next i Else pnlLinks.Visible = False End IfEnd WhileBut this generates the following error:No default member found for type 'Integer'.pointing to the linelblLinks.Text = sqlReader.GetValue(1)(i)in the above shown ASPX code. Can someone please correct me & suggest how do I loop through the recordset so that I can display the records in a Label control?
View 8 Replies
View Related
Apr 11, 2008
I have the following sql table and would like to group the results by "StoryTitle" to display in a datalist. The Storytitle field in the datalist is a LabelID StoryTitle StoryAuthor Rating StoryID Comments
1 About Me goodyone 6 20 Great Story
2 About Me goodyone 5 20 Love your work
3 Hello World magicme 6 26 What a Story
4 Hello World magicme 7 26 This Reminds me of...
I know i have to do something in the SQL Datasource statement. Not sure how to do it. here is my statement below
<asp:SqlDataSource ID="SqlDataSource3" runat="server" ConnectionString="<%$ ConnectionStrings:BrillConnectionString1 %>"
SelectCommand="SELECT * FROM [iaw.comments]">
</asp:SqlDataSource>
View 5 Replies
View Related
Dec 7, 2011
TableName: Order_Archive
Fields:
orderid
load_date
filename
order_date
dollar
I load a file each week into a table, each file has unique orderid, load_date, filename, order_date and dollar. However the same orderid, order_date and dollar could appear in another file with different load_date and file_name.
File1:
orderid, load_date, file_name, order_date, dollar
'1000', '2011-01-01', 'File1', '2011-01-01', '101'
'1001', '2011-01-01', 'File1', '2011-01-01', '102'
'1002', '2011-01-01', 'File1', '2011-01-01', '103'
File2:
orderid, load_date, file_name, order_date, dollar
'1001', '2011-01-08', 'File2', '2011-01-01', '102'
'1002', '2011-01-08', 'File2', '2011-01-01', '103'
'1003', '2011-01-08', 'File2', '2011-01-01', '104'
Question:
whats is the best way to retrieve the distinct records that has the most recent load_date? expected results below:
Expected Results:
orderid, load_date, file_name, order_date, dollar
'1000', '2011-01-01', 'File1', '2011-01-01', '101'
'1001', '2011-01-08', 'File2', '2011-01-01', '102'
'1002', '2011-01-08', 'File2', '2011-01-01', '103'
'1003', '2011-01-08', 'File2', '2011-01-01', '104'
View 3 Replies
View Related
Apr 15, 2008
hi friends,
how to display the records for this week?
for today i used this query to dispaly the values
select count(*) from tbl_voting v,tbl_lkvotefor l where v.voteforid=l.voteforid and v.creationdatetime=CONVERT(VARCHAR(10), GETDATE(), 101)
View 4 Replies
View Related
Apr 15, 2008
hi friends,
how to display the records for current month?
View 7 Replies
View Related
Mar 5, 2014
finding the solution for the below query?It displays repeated records.
select distinct ku.username,rro.role_name,rp.resource_type_code,kr.region_name,kc.currency_name,
fcr.cost_rule_id RULE,fcr.rate current_rate,pp.project_name,kou.org_unit_name ORG_UNIT
from
[code]....
View 2 Replies
View Related
Mar 31, 2008
in my sql query,when it run then it displays records as follows
dt_id daily_type dates emp_mgmt_id emp_name etc--------
48 Electrical 03/14/2008 22 abc
----------
49 Mechanical 03/14/2008 35 xyz
-------------
48 Electrical 03/14/2008 22 abc
----------
49 Mechanical 03/14/2008 35 xyz
-------------
i want to display records only once like as follows
dt_id daily_type dates emp_mgmt_id emp_name etc--------
48 Electrical 03/14/2008 22 abc
----------
49 Mechanical 03/14/2008 35 xyz
-------------
if i use group by on some fields then it gives error as follows
Column 'Daily_Time_Entry.daily_type' is invalid in the select list because it is
not contained in either an aggregate function or the GROUP BY clause.
so how can i design query so records display only once not repeated,or is any
alternative,to solve this .
my sql query as follows
SELECT dl.dt_id, dl.daily_type, convert(char,dl.dt_date,101) as
dates,dl.emp_mgmt_id,
emp.emp_name,emp.employee_id,dl.project_type,dl.project_id,
dl.cec_job_id,
cec.cecjobname,dl.time_st,dl.time_ot,dl.time_dt,op.other_proj_id,
op.customer_name,op.project_name,op.owner_rep_phone_num1,dl.work_desc,
m.material_id,m.material_type,m.material_date, m.project_type
,m.project_id,
m.qty,m.description,m.material_unit_price,m.material_markup,
m.material_subtotal,
m.cec_job_id,m.location
FROM material m left outer join
Other_Project op on m.project_id=op.other_proj_id left outer join
Daily_Time_Entry dl on
dl.project_id =op.other_proj_id inner join Employee_Mgmt emp
on emp.emp_mgmt_id = dl.emp_mgmt_id inner join CEC_Job cec
ON dl.cec_job_id = cec.cec_job_id
where (dl.dt_date='3/14/2008'and m.material_date='3/14/2008') and
(dl.project_type='Other Project' and m.project_type = 'Other Project')
and (dl.cec_job_id=m.cec_job_id) and (dl.daily_type='Electrical') and
(dl.project_id='18')
uday
View 3 Replies
View Related
Mar 13, 2008
hi i want to display records as per data in ms sql 2005
my data is as follows
Table name & fields are as follows :--
1) Ab_Corporate_Project
Fields are :
Ab_crp_id- int
Contract_no varchar
Project_no varchar
Field_order_no varchar
Ab_type varchar
Owner_id int
Records in Table Ab_Corporate_Project is as follows :
Ab_crp_id Contract_no Project_no Field_order_no Ab_type Owner_id
1 123 pr123 fd222 LS 2
2 323 pr323 fo122 GMS 3
3 243 pr243 fo233 EMC 1
2) Ab_Plant_Project
Fields are :
Ab_plant_id int
Service_order varchar
p_type varchar
Owner_id int
Records in Ab_Plant_Project is as follows
Ab_plant_id Service_order p_type Owner_id
1 so111 LS 1
2 so123 T&M 3
3 so110 EMC 2
3)Other_Project
Fields are
Other_proj_id int
Po varchar
Otype varchar
Owner_id int
Records in Other_Project is as follows
Other_proj_id Po Otype Owner_id
1 p123 LS 3
2 p22 EMC 3
3 p231 GMS 2
4)Owner_representative
Fields are
Owner_id int
Owner_names varchar
Records in Owner_representative are as follows
Owner_id Owner_names
<!--[if !supportLists]-->1 <!--[endif]-->john
<!--[if !supportLists]-->2 <!--[endif]-->amey
<!--[if !supportLists]-->3 <!--[endif]-->nickols
5)Employee_table
Fields are
emp_id int
Emp_name varchar
Records in Employee_table are as follows
Emp_id Emp_name
1 andrue
2 handy
3 sims
4 sandy
6)Daily_Time_Entry
Fields are
Dt_id int
Daily_type varchar
Dt_date datetime
Emp_id int
Project_type varchar
Project_id int
Time_st int
Time_ot int
Time_dt int
Records in Daily_Time_Entry are as follows
Dt_id Daily_type Dt_date Emp_id Project_type Project_id Time_st Time_ot
1 Elect 12/03/2008 1 AB Corporate 2 10 8
2 Mech 13/03/2008 2 AB Corporate 1 10 10
3 Mech 13/03/2008 1 AB Plant 2 5 6
4 Elect 13/03/2008 3 AB Plant 3 7 8
5 Mech 13/03/2008 2 Other Project 2 5 6
6 Elect 13/03/2008 4 Other Project 3 10 8
Where dt_date is in dd/mm/yyyy format
Also in project_type field -- AB Corporate is taken for Ab_Corporate_Project ,
AB Plant for Ab_Plant_Project, Other Project for Other_Project
This means if Project_type = AB Corporate then search into Ab_Corporate_Project
Else if Project_type = AB Plant then search into Ab_Plant_Project
Else if Project_type = Other Project then search into Other_Project
Now I want to display records as per datewise suppose I want to view records by date 13/03/2008
Record display as follows
Dt_id,Dt_date,emp_id,Emp_name, Project_type ,project_id, contract_no, service_order,ab_type,p_type,otype,owner_id,owner_name,time_st,time_ot
So how can I write query to display records as per datewise display
Plz send me a query for this solution
View 1 Replies
View Related
Sep 1, 2006
I am saving files in SQL Server 2005 with a datetime field called news_date_time and I want to display all today's records regardless of the record time.
I tried this code but didn't work..
[code]
SqlCommand sql_command = new SqlCommand("SELECT * FROM files_news WHERE news_date_time = TODAY ORDER BY news_date_time DESC", sql_connection);
[/code]
View 12 Replies
View Related
Jul 9, 2015
I am facing a strange problem in executing stored procedure. Basically my sproc will take a values from Java application and create a Insert statement. see stored procedure below.Just to give some more background- I am re writing the procedure which was written in oracle already.
Problem I am facing now is with the statement below . When I execute the procedure for first time it works fine however when I execute for second time onwards it is setting to empty. Not sure what is the problem with my declaration and setting up with values. For reference I have pasted my complete stored procedure code below.
select @L_STMT= 'INSERT INTO '+ @l_table_name + '(' + LTRIM(RTRIM((substring (@L_INS_STMT,2,len(@L_INS_STMT))))) + ') VALUES (' + LTRIM(RTRIM((substring (@L_INS_STMT1,2,len(@L_INS_STMT1))))) +')';
ALTER PROCEDURE [dbo].[PKG_OBJ_API$CREATE_OBJ]
(
@P_TYPE VARCHAR(4000),
@P_SCOPE VARCHAR(4000),
@Arrlist varchar(max),
[code]....
View 3 Replies
View Related
Dec 27, 2007
How would I list the users in the users table that have duplicate IDs or count of IDs > 1?The UserName field is unique.
State UserName First Last ID City CountTX Kkeaton Kathryn Keaton 1001 Dallas 2TX KakiKeaton Kathryn Keaton 1001 Dallas 2I think I have to use a subselect? If I use group by then it won't show both records. It shows only one of them.Thanks
Craig
View 4 Replies
View Related
