I have some contracts that run from different times:
jan 2007 to dec 2007
feb 2008 to jan 2009
I would look like to get all values between the months,
I can create it in the cube browser (see link),
but it would like to have it in mdx so it's automatic
calculated. I don't know if it's possible.
http://users.telenet.be/hanavan/question.jpg
thx in advance
I am attempting to write a SQL query that retrieves info processed between two times (ie. 2:00 pm to 6:00 pm) during a date range (ie. 8/1/06 to 8/14/06)... I am new to SQL and am perplexed... I have referenced several texts, but have not found a solution. Even being pointed in the right direction would be greatly appreciated!!
View 6 Replies View RelatedI'm running a pre-defined script which used to work fine on a file which was resupplied every month. below is the script used and the error message. looking at the error I assume that there is a rouge record within the file but have looked in Textpad and cannot find it.
UPDATE [matching].[dbo].[hot_nov] SET [AOV] = (CAST([Demand] AS DECIMAL)/CAST([Orders] AS INT)) WHERE [Demand] <> '';
UPDATE [matching].[dbo].[hot_nov] SET [POST2] = left([PostCode], PATINDEX('%[0-9]%', [PostCode] + '1') - 1) ;
UPDATE [matching].[dbo].[hot_nov] SET [POST4] = left([PostCode],LEN([PostCode])-4);
UPDATE [matching].[dbo].[hot_nov] SET [POST6] = left([PostCode],LEN([PostCode])-2);
error message
(1000 row(s) affected)
Msg 245, Level 16, State 1, Line 181
Conversion failed when converting the varchar value '2014-09-03 00:00:00' to data type int.
I have 2 tables, one is table A which stores Resources Assign to work for a certain period. The structure is as below
Name StartDate EndDate
Tan 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Max 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Alan 2015-04-01 16:30:00.000 2015-04-02 00:30:00.000
The table B stores the item process time. The structure is as below
Item ProcessStartDate ProcessEndDate
V 2015-04-01 09:30:10.000 2015-04-01 09:34:45.000
Q 2015-04-01 10:39:01.000 2015-04-01 10:41:11.000
W 2015-04-01 11:44:00.000 2015-04-01 11:46:25.000
A 2015-04-01 16:40:10.000 2015-04-01 16:42:45.000
B 2015-04-01 16:43:01.000 2015-04-01 16:45:11.000
C 2015-04-01 16:47:00.000 2015-04-01 16:49:25.000
I need to select the item which process in 2015-04-01 16:40:00 and 2015-04-01 17:30:00. Beside that I need to know how many resource is assigned to process the item in that period of time. I only has the start date is 2015-04-01 16:40:00 and end date is 2015-04-01 17:30:00. How I can select the data from both tables. There is no need for JOIN, just seperate selections.
Another item process time is in 2015-04-01 10:00:00 and 2015-04-04 11:50:59.
The result expected is
Table A
Name StartDate EndDate
Alan 2015-04-01 16:30:00.000 2015-04-02 00:30:00.000
Table B
Item ProcessStartDate ProcessEndDate
A 2015-04-01 16:30:10.000 2015-04-01 16:32:45.000
B 2015-04-01 16:33:01.000 2015-04-01 16:35:11.000
C 2015-04-01 16:37:00.000 2015-04-02 16:39:25.000
Scenario 2 expected result
Table A
Name StartDate EndDate
Tan 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Max 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Table B
Item ProcessStartDate ProcessEndDate
Q 2015-04-01 10:39:01.000 2015-04-01 10:41:11.000
W 2015-04-01 11:44:00.000 2015-04-01 11:46:25.000
I have a need to select rows where values in a column are within a range AND ALSO the first row that is highest (MAX) but just UNDER the range. For example:
NAME VAL
Jim 4
John 5
Tom 6
Julie 7
Rich 8
Rob 9
RANGE TO SELECT is 6-8 (inclusive)
Rows with a value in the range are returned (6, 7, & 8) as well as the row with a highest value that is JUST BELOW the range (5)
NAME VAL
John 5
Tom 6
Julie 7
Rich 8
How do i round a float value to its previous and next tenth place?
Example:
1.34
Previous 10th : 0
Next 10th: 10
45.67
Previous 10th : 40
Next 10th: 50
Basically I am trying to generate range for my FLOAT Column
1.34
Req o/p: Between 0 and 10
45.67
Req o/p: Between 40 and 50
Thanks,
Prakash.P
Prakash.P
The secret to creativity is knowing how to hide your sources!
is there a way to get a range of records using a query for example if only want rows from 10 to 20
View 7 Replies View Related
I have a order table which has a orderdate and despatchdate
i want to write a query in such a way that i want to get all the details from the table for a range specified date as the oderdate and despatchdate are user
interactable. I search the google to solve this problem but could not find a answer
Is it possible to create a constraint at the database level which implements the needs when cardinallity between two tables is definied as a range in the logical datamodel (examle 1 to 5-10). When yes, how can this be reached? When no, what is the best practise for these situations?
View 5 Replies View RelatedHello All,
I've been trying to get a range of values out of my SQL Server 2000 db without sucess. The field in question has the data type of char(8) and looks like this:
House_numbr_pub (leading spaces in front of each value)
140A
140
141
142
143
144
145
146
147
148
149
150
151
14500
Does anyone know of a sql statement that will return 140-150 including the 140A, but excluding the ' 14500'
Please Help,
James
What is the best way to do a where clause that includes a date range. Ex. WHERE date1 BETWEEN @Begin Date AND @EndDate. I want to include all of the @EndDate.
View 6 Replies View RelatedHi, I have a page working with not problem since 3 years, and now that we've moved our database from a SQL Server 2000 to SQL Server 7 and i receive this error everywhere a date is used.The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The error append on this line "While myReader.Read()" .. what can i do to solve this problem ?Thank you
View 1 Replies View RelatedHi,
I'm getting an error that reads "The conversion of a char data type to a datetime data type resulted in an out of range value data time value"
for the following view sql:
CONVERT (datetime, System . dbo.zStatus.MyDate)
MyDate is a char(8)
Any suggestions?
Thanks,
Denise
hi!
i have one datatable with date and some more fields are there in that. i want to query to return values from a particular date to another date. how can i do this? please help me!
thanks in advance!
I want to do a check to see if a number falls within a range specified by the user. Basically, they enter in a min and max value and I return a hit if a number falls inbetween.
I have having trouble with my SQL statement:
Code:
SELECT DISTINCT *
FROM Table
WHERE ( (0=0)
AND
(min.value <= Table.Value <= max.value) )
(This isn't my actual code, but just the logic)
It will return all the results everytime. Does anyone have any suggestions on what I could be missing here?
Thanks in advance!
Hi there:
This one's a bit tricky. I want to be able to take an IP address of a request on my website and find it in a table. Specifically, I need to be able to record IP address RANGES for search engines so that when they attempt to find a page that isn't there, I can programmatically send a 404 header instead of give them the human-friendly page (please don't make suggestions on this - I'm using PHP, etc., and can't send both a 404 header and a human-friendly page).
Anyway. Let's say a search engine has the IP range 33.33.0.0 through 33.33.255.255 (I made that up). if I receive a request from IP 33.33.101.221, how can I store ONE record (as either a regular expression or maybe multiple fields or somehow else) so that I can match that IP? I'm normally pretty good at figuring stuff like this out, but this one has me stumped for the moment.
All help is greatly appreciated.
I'll be posting a similar request on the PHP forum - I hope that's not considered cross-posting.
Jay
Hey all,
I have a table of errors, where many of the records are the same error, with times very close to each other. I want to be able to group by the error number and time. But the time grouping is a special case, it should return the MAX(Time) within the records that are less than 1 minute apart. So if my records were:
Code:
ErrorTime
4561:23:23
4561:23:46
4602:14:34
4602:15:15
4562:22:23
My query should return:
Code:
ErrorMaxTime
4561:23:46
4602:15:15
4562:22:23
I've tried using GROUP BY ... HAVING ... with variations on MAX(Time) and DATEDIFF, but no luck. Any help is appreciated, thanks.
Hi guys,
I have these 3 fields :-
1. Name (varchar)
2. Sex (varchar)
3. DateBirth (datetime)
I want to display data which group by count for Male n Female and devide to 3 range group.
1. 18-21
2. 25-30
3. 35-40
the date different will be count by field datebirth, with year and getdate().
Can anyone help me on this. thx
Regards,
Shaffiq
I am working on a report for staff productivity, and have to get a summary figure for how much productivity was expected for a date range. The problem is that the amount expected from an employee can change if they move from full time to part time etc.
So I have a view that has the begin date, end date, expected daily production # by employee, and have to figure out how to get the multiplication to work correctly.
Example:
Employee 1 had a daily production # of 10 from 1/1/07-3/31/07 and daily production of 5 from 4/1/07 - now
If I run the production report for 1/1/07 - 6/30/07 what I want is one summary figure of for the entire range which would be 10*Datediff(d,1/1/07,3/31/07)+5*Datediff(4/1/07,6/30/07) or 890+450=1340.
Of course the actual date range for the report will be a variable, and the dates for the begin and end of a production date range will be all over the place.
Any quick and easy way to do this?
I have the following table:
ID - Reference - Number
1 - null - 9000
2 - null - 9001
3 - 123 - 9002
4 - 123 - 9003
5 - null - 9004
6 - null - 9005
7 - null - 9006
I need to return the next (TOP 3) consecutive rows where Reference is null. In this case, 9004-9006. I assume a "having" clause but I'm not sure how to do this.
Hey guys..
pls help
what query should I do? Obtaining certain date only using SQL server2000?
Thnx...
Hi there
I am using SQL2005 and would like to check the whether the time is within the valid range for instance:
Data to check: 2:15AM
Range is between: 01:00AM till 06:59AM, 07:00AM till 02:00 PM
I can use the datepart for hh but that is not what I want. I want to have a full time: HH:MM cause sometimes if you do datepart by hour and if you apply into the above excample will be:
2 BETWEEN 1 AND 6 (this is ok)
2 BETWEEN 7 AND 2 (this is not ok)
Any idea?
Hi,
I need help with dates for my weekly report. Week starts on Sunday and ends on Saturday. In my view I have list of dates, how can I make a filter where dates should be within the week range. Example if I have, April 6, April 11, April 14, April 15. Week 1 should have April 6 and April 11 since week date is from April 6 to 12. Then April 14 and April 15 is for the next week. Thanks
Hi,
I have a where statement that covers the date range May 4 - May 12. However, it moves or rolls out every week. Is there a way to make it moves on May 13.
Here's my statement :
WHERE (Reviewdate >= DATEADD(dd, - (1 * DATEPART(dw, GETDATE())) + 1, CONVERT(datetime, CONVERT(nvarchar(10), GETDATE(), 101)))) AND (Reviewdate <= DATEADD(dd, 13, DATEADD(dd, - (1 * DATEPART(dw, GETDATE())) + 1, CONVERT(datetime, CONVERT(nvarchar(10), GETDATE(), 101)))))
Hi Everyone,
I am new to reporting servies and need some help.
My dataset is doing a simple select Details,amount,paidindate, from table where paidindate>=startdate <=enddate.
I have done a matrix report I would like add YTD as well as amount in each month. i.e
| Month + Year | YTD
Details | =amountmonth |=Amount for 01/04/year (finacial
year) to displayed month
having problems doing the YTD as it need to pull a different paidindate range.
Thanks,
John
I am creating a table that will check the age range for an attribute called Age. I am experiencing trouble when I run the code. Am I writing this code correctly?
check (Customer_Age in (>= '15' and <='100')),
Hi All,
I am very new to SQL and have a question, hopefully someone can answer.
I have a table of data, one of the fields is a date.
What i want to do is be able to have a query that can check if the date falls within a certain range - ie fiscal year and output in another column the fiscal year "code".
Ie: dates between 01/06/05 and 31/05/06 is fiscal year 0506
dates between 01/06/06 and 31/05/07 is fiscal year 0607
Could this query be dynamic so if a new fiscal year begins it would know to make the output the next fiscal year code???
Any help is much appreciated.
Cheers
Rudi
i have a time dimension table with week number,datesm month....
i want to add a column which will display the week range
something like this
Date DateRange
------------------------------------------------------
2005-01-02 00:00:00.000 2005-01-02 / 2005-01-08
2005-01-03 00:00:00.000 2005-01-02 / 2005-01-08
2005-01-04 00:00:00.000 2005-01-02 / 2005-01-08
2005-01-05 00:00:00.000 2005-01-02 / 2005-01-08
2005-01-06 00:00:00.000 2005-01-02 / 2005-01-08
2005-01-07 00:00:00.000 2005-01-02 / 2005-01-08
2005-01-08 00:00:00.000 2005-01-02 / 2005-01-08
Hi, 'am fairly very new to SQL SERVER 2000.
I have this particular problem....I need to develop a stored proc
where in a parameter checks the dates between JAN 1st and DEC 31st of a particular year. The parameter is declared for year..
I'll mention a small example below...
USE PUBS
declare @year as varchar
set @year = 1993
select * from employee
where hire_date >= '@year-01-01'
and hire_date<='@year-12-31'
This is just an example to show wat i want...
the year is prompted to the user...he/she can select any year
I get the following error message....
Server: Msg 241, Level 16, State 1, Line 1
Syntax error converting datetime from character string.
Can anyone help me on this......
Thanks in advance
I would like to generate a report based on age from an existing table. All I have is birthdate column to subtract from getdate(). I would like to create age bracket columns. The example below shows that there is 150 people aged 0-4 years old, 75 people aged 5-9, 225 people aged 10-14, etc. Would I use a case statement? Would I use the COALESCE function? I can come up with the calculations and the columns, I just can't fuse the values of my made up columns to result in one row. I need help, please....
here's a sample of what I want the query output to look like:
0-4 5-9 10-14 15-17
----------------------
150 75 225 35
Hi,
I have dates stored in an SQL Table and they have been allowed in the UK format..
e.g 30/12/2004 00:00:00
But when i then use this WHERE clause it errors and says:
"SQL Server The conversion of a char to a datetime data type resulted in an out-of-range datetime value"
WHERE date = '30/12/2004 00:00:00'
When i switch the month with the day (12/30/2004) its fine but doesnt select teh date.
How can i do this in the UK Format?
Thanks
How to display start date and finish date together in the same column with a '-' in between?
2/24/2008 - 3/1/2008
I have a select that is grouped by building/bedrooms and I have a rangefor the rentSelect Building,BR,drpBuilding.buildID,'$' + Cast(Min(Rent/BR) as varchar(10)) + '-' + Cast(MAX(Rent/BR) asvarchar(10)) as 'PerPerson'FROM Apt JOIN drpBuilding ONApt.buildID = drpBuilding.buildIDGroup By Building,drpBuilding.buildID,BRNow I want to only show a range if the rent varies, ie. I don't want toshow the range as being 510-510 I would then like just a single valuedisplayed. How can I do such a select?Thanks in advance,Mark Meadows
View 1 Replies View Related