MS Access And Stored Procedures Or Views
Mar 13, 2008
Can Microsoft Access access a stored procedure on the SQL Server? If not, is there any way to assign a parameter to a view? I can link to a view in Access, but I cannot link to a procedure. I need to SELECT * from aTable WHERE ID = [@PassidInID]. Any way to do this through Access? The reason for this, is because I am trying to run an existing query (which is very busy - using other queries with queries in them etc.), and I keep getting an ODBC error. I am thinking that if I move the queries to the SQL Server, it may get rid of this error?
It's a 2-tier app I have. Tables on the server, forms, queries, and everything else in Access.
Thanks in advance - I hope.
View 9 Replies
ADVERTISEMENT
Jul 22, 2007
Good evening:Can anyone give me the low-down on using view from within my stored procedures? I've got some rather complex views that join multiple tables resulting in a staggering SQL query. I then use stored procedures to accept input parameters to determine order by and direction clauses. This results in some rather large "IF ELSE IF ELSE IF..." statements in my SP. Put a complicated SQL query together with lots of IF THEN and it becomes difficult to keep stuff straight in the SP. Therefore, using the view to keep my SQL in one place is an ideal solution. However, and here's the question, does it have a negative impact on speed and/or scalability. We plan to use these SP's within an ASP.NET website that may get a very large amount of traffic. Any advice/help you can give me would be really appreciated. Thanks!
- Future Daddy
View 2 Replies
View Related
Feb 15, 2001
I have been having troubling getting at views and stored proceduers with ADO objects while developing in VB.
I can get a list of the views and stored procedures, but I don't know how to actually get the text values of them... i would like the text so that I can parse/compare them agianst one another...
Any thoughts or help on this?
I would really appreciate the help!
Matt
View 2 Replies
View Related
Feb 16, 2007
Hello,
This maybe a simple question, I'm using reporting services to make a report, question is can I write a stored procedure that queries from a join of two views instead of two tables?
I'm having trouble getting my table data into the reportable state I want it, and I think organising into views might be easier.
Thanks for any help.
View 3 Replies
View Related
Apr 18, 2007
Hi everybody,I am trying to alter a view inside a Stored Procedure and sql server is not allowing me to do so.Can we not have an alter view inside a Stored Procedure?Here is the code: CREATE PROCEDURE dbo.[UPDATE_VIEW_LINEITEMALLOTMENT] -- Add the parameters for the stored procedure here@MAINID int,@BE VARCHAR(8)ASBEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. --SET NOCOUNT ON; ALTER VIEW [Budget_Management_System].[dbo].[LineItem_OCAFund] AS SELECT TOP (100) PERCENT SUM(dbo.ALL_OCAFUND.AMOUNT) AS Expr2, dbo.APP_LINEITEM.LINENUM, dbo.APP_LINEITEM.PC, dbo.APP_LINEITEM.CATEGORY, dbo.APP_LINEITEM.ROWID, dbo.APP_LINEITEM.MAINID FROM dbo.APP_LINEITEM INNER JOIN dbo.ALL_ORG ON dbo.APP_LINEITEM.ROWID = dbo.ALL_ORG.LINEITEMID INNER JOIN dbo.ALL_OCAFUND ON dbo.ALL_ORG.ROWID = dbo.ALL_OCAFUND.ORGID INNER JOIN dbo.APP_AMENDMENT ON dbo.ALL_ORG.AMENDMENTID = dbo.APP_AMENDMENT.ROWID AND dbo.ALL_OCAFUND.AMENDMENTID = dbo.APP_AMENDMENT.ROWID GROUP BY dbo.APP_LINEITEM.LINEORDER, dbo.APP_LINEITEM.BE, dbo.APP_LINEITEM.MAINID, dbo.APP_LINEITEM.LINENUM, dbo.APP_LINEITEM.PC, dbo.APP_LINEITEM.CATEGORY, dbo.APP_LINEITEM.ROWID, dbo.APP_AMENDMENT.AMENDMENTORDER HAVING (dbo.APP_LINEITEM.BE = @BE) AND (dbo.APP_LINEITEM.MAINID = @MAINID) AND (dbo.APP_AMENDMENT.AMENDMENTORDER = 1) ORDER BY dbo.APP_LINEITEM.LINEORDER ENDthanks a lot,Murthy here
View 7 Replies
View Related
Sep 7, 2007
Hi,I was just wondering if it's possible to access views from stored procedures? I know it doesn't make much sense, but would it be possible? If so, can you also give me some code example?Thanks.
View 4 Replies
View Related
Nov 8, 2007
I do all my data access through stored procedures. Is there any benefit in creating views that the stored procedure accesses. At the moment, I tend to just write the select and join within the stored procedure.
View 12 Replies
View Related
Oct 9, 2002
Is there a way to script views and/or stored procedures from Query Analyzer? I am hoping to do this as part of a stored procedure.
Thanks!
View 3 Replies
View Related
Oct 19, 2001
I have two databases named A and B. They are exactly same table structure, but the records are different, and we have near 400 stored procedures and over100 views in the database A. Now my question is that how can I transfer all stored procedures and views from database A to database B?
Thank you very much!
View 2 Replies
View Related
Dec 1, 2005
Hi All,
Novice question. Would someone explain tell me what a view is used for? Also I am confused about the difference between a function and a stored procedure. They both seem like functions to me.
View 7 Replies
View Related
Jul 20, 2005
Please could someone explain to me the differences between a storedprocedure and a view.The reason for this question is I have two almost identical ASP pages.Both get the same results but one uses a stored procedure and one usesa view. If the query returns no results the 'view page' generateserrors and therefore I have to check for BOF and EOF, whereas the'stored procedure page' does not generate errors and instead wouldappear to return a recordset with 0 entries.Thanks in advanceNeil.
View 1 Replies
View Related
Jun 18, 2007
Hi
what is the diffrence between views and stored procedures in sqlserver 2005
thanks in advance.
View 3 Replies
View Related
Sep 25, 2007
Can you create views within a stored procedure?
View 10 Replies
View Related
Nov 8, 2000
Hello Everybody,
I posted this same question couple of times in the news groups but no answers. I have a 2 tables and i am doing a union query using a view. each has 250 rows. The query takes 20 seconds to return the results. no joins or anything. the create view simply looks like this:
create view myview as
select id, name from table1
union
select id,name from table2
Where as if i write a stored procedure like below, it returns the rows in 4 seconds.
create table #mytable
( id int, name varchar(30))
insert into #mytable (id, name) select id, name from table1
insert into #mytable (id, name) select id, name from table2
select id,name from #mytable.
I prefer doing in the view since both returns the same result. I tried running dbcc, update statistics. but no luck. Can anyone please help me in this issue.
Thanks
Ramesh
View 3 Replies
View Related
Oct 17, 2007
I have a multiple table dataset that needs to be returned, with at least 5 joins, some inner, some left outer.
Currently, this is done via a parameterized stored prodedure, which is used fairly frequently. The parameters only affect the where clause, not the joins.
Would it be better to create the view with the joins already done, then pass in the parameters with the stored procedure? Which is better for overall performance? Which is better for quicker response times to the calling asp.net application?
Thanks in advance,
Leah
View 2 Replies
View Related
Jul 23, 2005
This is a general question regarding the use of view and storedprocedures. I'm fairly new to databases and SQL.I've created a SQL database using an Access Data Project ("ADP") andI'm satified with the table structure. I've moved on to building somefront ends for our users.I'm running into situations where I want subreports to be built fromqueries [views or stored procedures-I don't know which to use so I usethe term query] that are dependent on the values in other controls.I've played with stored procedures and I've figured out how to sendcriteria to a stored procedure and then dynamically change the recordsource of a subreport.However, I'm running into cases where I can't add records to theresults of a stored procedure. The table I'm running a stored procedureon has five fields: (1) Primary Key for each record, (2) FundID that'sa primary key in another table, (3) CompanyID that's a primary key inanother table, (4) Attribute 1 of the (Fund/Company) and (5) Attribute2 of the (Fund/Company).The stored procedure filters the set of Fund/Companies based on aFundID from a form. I can update this stored procedure. However, forusers, they would like to see the Fund Name from the table that hasunique FundIDs. As soon as I include that into the stored procedure, Ican no longer add records.My questions are many:1. Is there a primer online that discusses the theory behind myquestion? Recordsets, updatability, working with recordsets in forms?2. What are some best practices for developing subreports, combo boxes,list boxes, etc. where the data is dependent on the values in a control3. I'm struggling with the best ways to grab objects on a form. If I'mon the main form I'm comfortable working with theMe.__object__.__sub-oject routine. However, if I'm in one subform whereI need another subform to change based on the record I'm in, I feelthat my code to get at the subform is very klunky..forms.main form name.sub form name.form.record sourceI don't even know how I figured out the "form" part before recordsource. Again, are there some basic rules or guides about navigatingthrough forms in VBA?4. Should I be developing front ends in some other environment?I know it's a lot, but all the advice from the newsgroups seems topresuppose some knowledge about how ADP, ADO, ODBC..blah blah and Ican't seem to find any documents about ADP and SQL.
View 3 Replies
View Related
Jan 27, 2006
The purpose for my questions is accessing these technologies fromapplications. I develop both applications and databases. Working withMicrosoft C#.NET and Microsoft SQL Server 2000 Production and 2005 TestEnvironments.What is the purpose of a view if I can just copy the vode from a viewand put it into a stored procedure?Should I be accessing views from stored procedures?Should I use views to get information? and Stored Procedures forInserts, Updates and Deletes?What are the performance differences between the two?Thank you for any and all information.SBProgrammer
View 28 Replies
View Related
May 9, 2006
Hi,
I would like to use the view of the company data in the following stored procedures
without needing to pass a value into the CompanyID identity column. Is there a way to do this? The following code contains the view, the insert trigger on the view, and the desired stored procedures.
Also, this code is given me problem as well the error message says it cannot convert varchar to int. This code is located in the insert trigger.
INSERT INTO State(StateName)
VALUES(@StateName)
Here is the code of the company view, notice the C.CompanyID it is used in the GetCompany stored procedure.
SELECT C.CompanyID, C.CompanyName, A.Street, A.City, S.StateName, A.ZipCode, A.Country, P.PhoneNumber
FROM Company AS C INNER JOIN
Address AS A ON C.AddressID = A.AddressID INNER JOIN
State AS S ON A.StateID = S.StateID INNER JOIN
Phone AS P ON C.PhoneID = P.PhoneID
Here is code for the insert trigger on the view
CREATE TRIGGER InsertTriggerOnCustomerView
ON ViewOfCompany
INSTEAD OF INSERT
AS
BEGIN
DECLARE @CompanyName VARCHAR(128)
DECLARE @AddressID INT
DECLARE @Street VARCHAR(256)
DECLARE @City VARCHAR(128)
DECLARE @StateID INT
DECLARE @StateName VARCHAR(128)
DECLARE @ZipCode INT
DECLARE @Country VARCHAR(128)
DECLARE @PhoneID INT
DECLARE @PhoneNumber VARCHAR(32)
--DECLARE @CompanyID INT
SELECT
--@CompanyID = CompanyID,
@CompanyName = CompanyName,
@Street = Street,
@City = City,
@StateName = StateName,
@ZipCode = ZipCode,
@Country = Country,
@PhoneNumber = PhoneNumber
FROM INSERTED
INSERT INTO State(StateName)
VALUES(@StateName)
SET @StateID = @@IDENTITY
INSERT INTO Address(Street, City, StateID, Country, ZipCode)
VALUES(@Street, @City, @StateID, @ZipCode, @Country)
SET @AddressID = SCOPE_IDENTITY()
INSERT INTO Phone(PhoneNumber)
VALUES(@PhoneNumber)
SET @PhoneID = SCOPE_IDENTITY()
INSERT INTO Company(CompanyName, AddressID, PhoneID)
VALUES(@CompanyName, @AddressID, @PhoneID)
END
The stored procedures are here.
CREATE PROCEDURE GetCompany
(
@CompanyID INT
)
AS
BEGIN
SELECT CompanyName,Street, City, StateName,
ZipCode, Country, PhoneNumber
FROM
ViewOfCompany
WHERE
CompanyID = @CompanyID
END
GO
CREATE PROCEDURE AddCompany
(
@CompanyName VARCHAR(128),
@Street VARCHAR(256),
@City VARCHAR(128),
@StateName VARCHAR(128),
@ZipCode VARCHAR(128),
@Country VARCHAR(128),
@PhoneNumber VARCHAR(32)
)
AS
BEGIN
INSERT INTO ViewOfCompany
VALUES(@CompanyName, @Street, @City, @StateName,
@ZipCode, @Country, @PhoneNumber)
END
GO
View 3 Replies
View Related
Mar 22, 2006
Hi,Right, i have a fairly good understanding of SQL. However, i have a fairly basic understanding of SQL Server.I know Storedprocedures are really good and i'm starting to use them. I understand they are good for making inserting, updating very easy.However when you look at a SQL Server database you get various folder, this leaves me a little confused with what they are all used for? whats the difference between these?Thanks in advance!sorry for the basic question, i'll try to challange you next time
View 1 Replies
View Related
Jul 22, 2007
Greetings,
We have recently begun using transactional replication to keep the data in our SQL Servers synchronized in a geographically dispersed environment. We replicate our tables but we have never replicated views, stored procedures, or user functions in our production systems. We are thinking of doing so but wonder if the overhead of running the replication agents doesn't outweigh the benefits of having replication assist with the occassional change to these design elements.
Is anyone on this forum replicating views, sprocs, and user functions? What has your experience been?
Thanks for any ideas that you share.
BCB
View 4 Replies
View Related
Feb 20, 2007
Hi all--I used the following type of script to migrate tables, views and stored procedures from 'dbo' to 'hqmsuser':
alter authorization on dbo.PK_T_PQ_MASTER to HQMSUSER
alter schema HQMSUSER transfer dbo.PK_T_PQ_MASTER
go
This was per recommendations from the BOL to use instead of the 'sp_changeobjectowner' procedure. I returned the following error:
Msg 15346, Level 16, State 1, Line 3
Cannot change owner for an object that is owned by a parent object. Change the owner of the parent object instead.
Msg 15347, Level 16, State 1, Line 4
Cannot transfer an object that is owned by a parent object.
How do I find and change the parent object on this from 'dbo' to a non-dbo schema ownership?
View 1 Replies
View Related
May 21, 2008
Hi Folks,
I am writing a program that transforms a generic MS SQL database to make it compatible with our application. In order to make the transformation, I have to access all the elements of the generic database programmatically.
I know that the Master database contains all this information. Is there a query that allows me to access the "non-system" tables, sps, views, and functions?
For Tables, I need to know the Name(s) of the tables, the column names, the column type, ALLOW Nulls, Primary Key, Identity Seed settings, and Triggers.
For SPs, I need to know the Name(s) and access the SP source code (assuming it's unencrypted).
For Views, I need to know the Name(s) and access the Views Source
For functions, I need to know the Name(s) and access the function source.
I can see various tables in the Master database from management studio, like sys.objects, sys.tables - which look like they have the info I need. However, when I run a query against master like:
select * from sys.objects .. I get an error:
Msg 208, Level 16, State 1, Line 1
Invalid object name 'sys.objects'.
Thank you in advance.
View 13 Replies
View Related
Nov 9, 2007
Hi,
I've a doubt regarding deploying and creating package (MSI and EXE files) for SQL Stored procedures,views,tables,functions,triggers etc.,just like ASP.NET application by publishing and deploying..Is it possible in the same way for sql objects.If so,pls help me how to do it?
Thanks in advance.
View 1 Replies
View Related
Dec 8, 1999
COULD ANYONE PLEASE TELL ME HOW I CALL A STORED PROCEDURE FROM AN ACCESS 97 DATABASE WHICH ARE HELD ON AN SQL 7 DATABASE.
I HAVE USED THE USAULL CALL STATEMENT, BUT THIS DOES NOT WORK.
SO ANY HELP WOULD BE GRATEFULLY APPRECIATED.
GARY J
View 3 Replies
View Related
Nov 3, 2000
can anyone tell me how to call SQL stored procedures in MS Access97...
appreciate any help
View 4 Replies
View Related
Nov 20, 2003
How can I get a group of stored procedures or a job to run on the sql server from Access?
Thanks
View 1 Replies
View Related
Jul 18, 2007
Hi,
How can I remove access to extended (xp_) stored procedures?
Is there any revoke on <stored_procedure_name> ... command? How can I generate a script of all users who have execute privileges for these procedures? Also, is there any way of restricting (instead of removing) access to those procedures?
Any help will be greatly appreciated!!!
Thanks,
Alla
View 2 Replies
View Related
Oct 5, 2005
I'm going through the SQLSecurity Checklist I found at sqlsecurity.com. One of the points it says to "Restrict to sysadmins-only access to stored procedures and extended stored procedures that you believe could pose a threat." It also lists a bunch of stored procs and extended stored procs that you should consider restricting to sysadmins only. I was wondering if someone could give me some pointers on how to do this? I would like to write a script that I could run on every sql server 2000 install that would do this. How could I ensure that every user does not have access except the sysadmins?
Thanks,
Chris
View 11 Replies
View Related
Dec 17, 2007
I am working on a corporate project. I have many stored procedures(>100) and wanted to know which applications( or Frontends) in the network use or consume my stored procedures. How can i do that in SQL 2005??
NBU
View 5 Replies
View Related
Jul 3, 2007
Hi. I have set up an instance of SQL 2005 on my local computer. I use MS SQL Server Management Studio to login into my 2005 instance via Windows login. When I expand "Stored Procedures" under "Programmability" of the Database I want and go to a stored procedure and right click, I don't see the "properities" selection.
I know it's there because I can get to it on other instances but I can't get to it on my local instance. I added my windows user to my Logins and then to my database users but it didn't help.
Can anyone please tell me what I need to do so I can access the properties of the stored procedures?
Thanks
View 3 Replies
View Related
Dec 12, 2006
Hello everyone,
I have a design problem which I am hoping somebody can shed some light on.
I am running SQL Server 2000 using SQL authenticaiton (due to be changed to Windows authentication in the next 6 months). I have a table in my database which we shall call monthly. I want to restrict the ability to insert to the monthly table to 2 stored procedures (proc_abc & proc_xy) which I have written which do various other validation checks before it inserts the data into monthly.
Users with the Foo function assigned are able to execute proc_abc & proc_xy
I have written a VB application which can be used by users who are not familiar with SQL to be able to execute these stored procedures. (Must have Foo function in order to login to this application).
I want to restrict the ability to execute the stored procedures to users using the VB application only, and thus not be able to execute the stored procedure using Query Analyzer or such like for any Foo user.
Is there anyway I can do this?
One suggestion put to me is two split the functions. Have one function lets call it Top which can access the VB application and then have another function called Bottom which is able to execute the stored procedures. Only the VB app would have access to the Bottom credentials. But is this secure? Would I just hard code the credentials for the Bottom function user within the VB app? This doesn's seem a secure way of doing things to me.
Thanks for the help!
View 6 Replies
View Related
Aug 31, 2006
I have read that it is possible to configure sql server express so that the database can only be accessed through stored procedures. Can anyone tell me how to do this. Many thanks.martin
View 2 Replies
View Related
Sep 17, 2007
Hi there,
I have a database table with a field to specify the username of records that particular user is allowed to access (read only). I want to be certain the user does not have access to any other records. So I'm using a stored procedure to query the table with "WHERE dbuser = USER".
My problem is that the stored procedure is returning an error that the table I'm querying cannot be found, and I suspect it is because the user does not have proper permissions to see those tables, even through the stored procedure.
So my question is, how do I grant the user sufficient access for this stored procedure to work without outright granting them select permission on the tables?
Much appreciated!
View 3 Replies
View Related
