MS OLE DB Provider For DB2 Connection Errors
Jan 11, 2007
I'm attempting to configure a new Microsoft OLE DB Provider for DB2 connection using the provided Data Access Tool and Wizard. I'm configured for DB2MVS TCP/IP and have my Catalog and other defaults set. When I go to connect I get the following:
Could not connect to data source 'New Data Source':
An internal network library error has occurred. A network level conversational protocol error has occurred. SQLSTATE: HY000, SQLCODE: -343
The port I've configured is what is used when we use the IBM OLE DB and ODBC drivers.
I turned on tracing and tested the connection again and recieved only the following in a file that got named DB2MSG1.ATF. We have been struggling with this for awhile, any help is greatly appreicated.
� �-� � �����/�0�>�P�messagesync.h�DRDADriverConnect�DRDA AR message: Name: PRCCNVRM, Severity: Error, Diagnostic: DSNLZSPA L, Database: DB2DEVP�þÊ0�:���
View 1 Replies
ADVERTISEMENT
Jun 26, 2007
Hi,
After reading this helpful blog entry:
http://blogs.msdn.com/sql_protocols/archive/2007/05/13/sql-network-interfaces-error-26-error-locating-server-instance-specified.aspx
I think this might be a good place to ask the following question.
I am writing the error handling code for my data access layer for a web application. I am using the Enterprise Library Data Access Application Block. Although this supports generic database connections, I realized that I need to handle errors specific to each database type. Microsoft SQL is the only database type I am using for now, so I am using a try...catch (SqlException e).
In testing my code, I intentionally changed the instance name in web.config to a name that does not exist. I get the very popular error 26 - Error Locating Server/Instance Specified. This is returned as a SqlException, but the SqlError.Number property is set to -1.
Am I getting "-1" because the provider hasn't actually connected to SQL yet, so it doesn't have an actual SQL error number?
Can I assume that (SqlError.Number == -1) is always a fatal, provider-level connection exception?
Will the provider ever use another SqlError.Number of its own? Or do all numbers besides -1 come from the SQL sysmessages table?.
Is there a comprehensive list of what exceptions might be raised by the SqlClient provider, including #26?
The reason for all the questions is that in a web application, I want to prevent the end-user from seeing the "real" exception if it has to do with configuration errors. However, maybe there are other errors that the user should see and handle? It's hard to know without a full list of SqlClient provider errors, along with the SqlError.Number that each error maps to.
Thanks and regards,
Mark
View 6 Replies
View Related
Mar 17, 2008
Hi to all,
We have 4 client machine and 1 server machine, that server have all the sql server 2005 database€™s.
A project developed from client1 with Asp.net 2005 now I need to access that project from client2 so I type http://My Ip address/Folder Name/home.aspx in my browser here when the sql connection is open(SqlConnection.Opn()) then I meet this problem
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Please reply me.
View 2 Replies
View Related
Nov 28, 2006
Hi all,
While working on the Integration Services project.
When I try to create a new Data Connection in Connection Managers for ADO .NET SAP Provider, it gives the following exception:
TITLE: Microsoft Visual Studio
------------------------------
Could not set the connection qualifier for the current connection.
------------------------------
ADDITIONAL INFORMATION:
Could not create a connection for the provider invariant name 'Microsoft.Adapters.SAP.SAPProvider'. Verify that this provider is installed correctly on this computer. (Microsoft.DataTransformationServices.Design)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=CouldNotCreateConnection&LinkId=20476
------------------------------
Object reference not set to an instance of an object. (Microsoft.Adapters.SAP.SAPProvider)
------------------------------
BUTTONS:
OK
------------------------------
Can anyone describe, what is the resolution for the same.
View 1 Replies
View Related
Jan 23, 2007
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
I am getting this error and using this connection string
Data Source=192.168.0.100;Network Library=DBMSSOCN;Initial Catalog=ENet;User ID=eonline;Password=eonline;
What can be solution for this.
View 4 Replies
View Related
Mar 10, 2008
Hi, I am working on VS 2005 and using SQL 2005 Express and i am processing excel files and inserting records in data base as i processing starts and almost after processing 600 i got this error provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server. how can i solve that thanx
View 3 Replies
View Related
Apr 26, 2007
We just changed the dev environment to sqlagent. From then we were unable to see the reports on the report server because:
An error has occurred during report processing.
Cannot create a connection to data source 'IHRSDataSource'.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
this error is cropping up.
To Resolve this issue, we checked the Surface Area Configuration and also checked the Reporting Service Configuration . There seem to be no problem and everything looks ok.
Please help me in resolving this issue.
View 4 Replies
View Related
Apr 14, 2007
After I installed the various service packs via Windows Update, my WindowsForms application can no longer connect to the server.
The error message is:
provider: Named Pipe Provider, error: 40 - Could not open connection to SQL server.
However, the Reporting Services work just fine.
Please help.
View 1 Replies
View Related
Mar 17, 2008
Hi to all,
We have 4 client machine and 1 server machine, that server have all the sql server 2005 database€™s.
A project developed from client1 with Asp.net 2005 now I need to access that project from client2 so I type http://My Ip address/Folder Name/home.aspx in my browser here when the sql connection is open(SqlConnection.Opn()) then I meet this problem
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Please reply me.
View 1 Replies
View Related
Feb 20, 2006
Hi All,
I am new to dotnet. I tried connecting to the database MS SQL Server 2000. I gave the code like, the one below, in form load event,
SqlDataReader dr = null;
SqlConnection myConnection = new SqlConnection("Data Source=IP;Initial Catalog=name;User Id=uid;Password=pwd;");
myConnection.Open();
myConnection.Close();
But I could not connect. The error message highlights the line myConnection.Open() and displays the error
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
It tries connecting to SQL Server 2005. There is no SQL Server 2005 in that system. There is only SQL Server 2000.
I have the aspx code in my local system and the database in another machine.
Could Someone please help me out in solving this problem.
Thanks,
Arun. S
View 26 Replies
View Related
May 20, 2008
hi all
I realised this has been done to death, and so much information out there but I am still in a quandry.
I have had to rebuild my computer.
This is what I did
XP machine
using SQL Server 2005 Standard Edition
using Windows Authentication
NZ6(MSSQLSERVER)
straight default install all the way
unfortunately when ready to run reports from my instance(computer)
I received the error as in provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
thought I had it all okayed but obviously something not right
so ended up unistalling then - did the following:
Load SQL Server from disc1 and start install
failed on alter Counter Registry key error
fixed this from KB article (known error that can happen)
restarted
Went to Windows Update
check IIS is installed - tick is on - IIS - admin tools - make sure asp2 is associated - yes ok
Then back to install sql server - there is no instance set up yet
Disk 2 and setup .exe
All ok on Reporting Services, Analysis etc.
But once again all seems fine but still getting the error:
connection is all fine in Management Studio - eg I can see tables etc
connection is all fine in Business Intelligence - eg I can preview my reports
I then can deploy up to - NZ6
open NZ6
eports
report is there fine - but just errors
some simple little tick that I have not done!!
I seem to have checked and rechecked everything and obviously doing another re-install does not seem a logical step from here.
I will continue to check but if someone jump in and advise please would be great.
cheers
jewel
View 6 Replies
View Related
Oct 15, 2007
Hi
I am creating a web site using Visual Studio 2008 & trying to connect to database on SQL Server 2000. My test connection is successful but while debugging the page I am getting this error :
" provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server "
Your suggestions on that will be appreciated.
Thanks
Ashok
View 5 Replies
View Related
Aug 27, 2007
Guys!
has MS done Anything about this issue? I am running NT2K and have the same issue y'all having
provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
Does anyone have a fix or a workaround that will work once the application goes live?
View 1 Replies
View Related
Apr 3, 2007
Hi,
Am getting the followning error:
{"An error has occurred while establishing a connection to the server. When
connecting to SQL Server 2005, this failure may be caused by the fact that under
the default settings SQL Server does not allow remote connections. (provider: Named
Pipes Provider, error: 40 - Could not open a connection to SQL Server)"}
from my application where 3 service references had been added
and hav added this segment in app.config file
<configSections>
<section name="dataConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Data.Configuration.DatabaseSettings, Microsoft.Practices.EnterpriseLibrary.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=null" />
</configSections>
<dataConfiguration defaultDatabase="Connection String" />
<connectionStrings>
<add name="Connection String" connectionString="Data Source=DPA1W075Binstancename;Initial Catalog=SoapBox;Integrated Security=SSPI;"
providerName="System.Data.SqlClient" />
</connectionStrings>
Solutions recommended for this were start running the SQL browser instance and enable Namespipes in Sqlserver configuration manager.Did both.. but nothing worked.
Still getting the same error..
Can somebody plz help me?
View 2 Replies
View Related
Jul 21, 2007
Hi guys, I have a problem with error: 40.
I made a Web page, and it works perfect on my local machine, everything is OK, until I uloaded page to the server, it reports this error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735091
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770
System.Web.UI.WebControls.Repeater.GetData() +50
System.Web.UI.WebControls.Repeater.CreateControlHierarchy(Boolean useDataSource) +232
System.Web.UI.WebControls.Repeater.OnDataBinding(EventArgs e) +53
System.Web.UI.WebControls.Repeater.DataBind() +72
System.Web.UI.WebControls.Repeater.EnsureDataBound() +55
System.Web.UI.WebControls.Repeater.OnPreRender(EventArgs e) +12
System.Web.UI.Control.PreRenderRecursiveInternal() +77
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
I dont't Know what to do. Please HELP!
View 6 Replies
View Related
Apr 4, 2008
I've just posted mywebsite andthis error keep being trhrown as soon as I access the DB
I dont understand what is going on and if I dont get it working bu today will delivery date will expire and I will get in trouble...
So anyone knows what is going on
It says the following:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Here is my con string :
<add name="ASPNETDBConnectionString" connectionString="Data Source=p3swhsql-v09.shr.secureserver.net;Initial Catalog=myCatalog;User ID=MyID;Password='Mypassword"/>
Thanks a lot
View 4 Replies
View Related
May 14, 2008
I try to connect to a SQL Server 2005 Express Edition via IP address. But anytime the application tries to connect to the database here is th error message I receive:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)
There is the connection String code:
"Data Source=192.168.1.109,1433;Network Library=DBMSSOCN;" & _
"Initial Catalog=myDataBase;" & _
"UserID=Username; Password=Password;"
Already checked
I have enabled the TCP/IP under SQL Server,
Under SQL Server Configuration Area, I have chosen the option Local and remote connection: TCP/IP only
I have verified that my firewall allows SQL remote and a Local Connection.
Now I don't know where to look or what I have to fix to continue. I will really appreciate if somebody can help me.
Thank you in advance.
AA
View 12 Replies
View Related
Jan 28, 2008
Hi I always get good reply from u all, thank you,
I have copied my asp.net website from one server to another. they administrator made necessary modification on IIS manager . and able to see the website on browser. but now i can't loging to system using old password.
I tryed to create new password then also it gives error
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Here I have used asp.net login control and membership class. Do I need to make nay changes in code.
I have already modified server name in connection string in web config file.
any one can say what is the problem and how to solve this.
thanks
Pat
View 1 Replies
View Related
Apr 18, 2008
Hi ,
I am struck with one issue.Plz help me out if you have any solution for this one.
Details
Front End - Visual Studio 2005
Back End -SQL Server 2000 (Remote database)
Error i am getting is
{System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at dbcAccess.clsSQL.GetConnect() in C:Documents and SettingskerlsgMy DocumentsVisual Studio 2005ProjectsdbcAccessdbcAccessclsSQL.cs:line 296}
{System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
View 6 Replies
View Related
Apr 10, 2008
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
View 3 Replies
View Related
Apr 7, 2008
i'm going nuts with SQL server notification thing. I have gone throigh this artical which tells how to set user http://www.codeproject.com/KB/database/SqlDependencyPermissions.aspx. This article show how to create new user and setup for sql server notification.But In my case user was alredy existing in database. which is very common senario in most cases. So i did following( check the SQL script below) but then i get this error
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)"
this my sql script
use [master]Go
-- Ensuring that Service Broker is enabled ALTER DATABASE [DatabaseName] SET ENABLE_BROKERGO
-- Switching to our databaseuse [DatabaseName]GO
CREATE SCHEMA schemaname AUTHORIZATION usernameGO
ALTER USER username WITH DEFAULT_SCHEMA = schemaname GO
/* * Creating two new roles. We're not going to set the necessary permissions * on the user-accounts, but we're going to set them on these two new roles. * At the end of this script, we're simply going to make our two users * members of these roles. */EXEC sp_addrole 'sql_dependency_subscriber' EXEC sp_addrole 'sql_dependency_starter'
-- Permissions needed for [sql_dependency_starter]GRANT CREATE PROCEDURE to [sql_dependency_starter] GRANT CREATE QUEUE to [sql_dependency_starter]GRANT CREATE SERVICE to [sql_dependency_starter]GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_starter] GRANT VIEW DEFINITION TO [sql_dependency_starter]
-- Permissions needed for [sql_dependency_subscriber] GRANT SELECT to [sql_dependency_subscriber] GRANT SUBSCRIBE QUERY NOTIFICATIONS TO [sql_dependency_subscriber] GRANT RECEIVE ON QueryNotificationErrorsQueue TO [sql_dependency_subscriber] GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_subscriber]
-- Making sure that my users are member of the correct role.EXEC sp_addrolemember 'sql_dependency_starter', 'username'EXEC sp_addrolemember 'sql_dependency_subscriber', 'username'
View 10 Replies
View Related
Mar 5, 2007
Facts:1. I am using my account on Godaddy trying to connect to my sql server db.2. I can get into my db using user id and password.3. Godaddy's help file shows this for a connection string: connectstr = "Driver={SQL Server};SERVER=" & db_server & ";DATABASE="
&db_name & ";UID=" & db_username & ";PWD=" &
db_userpassword4. My connection string: "Server=whsql-v09.prod.mesa1.secureserver.net;uid=dbasolutions;pwd=***;database=DB_87972;" & _ "Trusted_Connection=False providerName=System.Data.SqlClient"{password **** out}5. Get error message An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) I tried to email Godaddy's help desk with this information. There first response: We do not allow remote connections to our sql server database.There second response was to read the help file!Does anybody have any suggestions? Thanks in advance,bswanson
View 1 Replies
View Related
Apr 5, 2007
We experience the 40 error when our Asp.net code runs under IIS and uses named pipes to a sql server 2005 named instance.
We've tried all suggestions found on blogs and KB articles such as making sure the named pipes protocol is enabled, making sure the Browser service is started, making sure Allow Remote Connections is enabled, making sure we're not using Asp.Net 2.0 membership providers, and the list goes on and on.
We boiled it down to a simple test scenario. We open a SqlConnection to the sql 2005 box in the code with the intention of binding a datareader to a gridview, but it never gets that far because the connection.Open() fails.
If we run this test application as a virtual directory in IIS and Asp.Net 2.0, the connection.Open() fails.
If we run this test application from Visual Studio .Net using Cassini (PWS), the connection.Open() succeeds and binds to the gridview.
What could be causing the connection to fail under IIS but succeed under Cassini? We've tried setting IIS to run as a domain user and with digest authentication enabled. That made no difference.
Any help or insight is appreciated!
View 3 Replies
View Related
Mar 1, 2007
Hi,
I am trying to connect to my SQL Server 2005 but it gave me following error message.
TITLE: Connect to Server
------------------------------
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
So, Please help me to solve this problem.
tnks.
View 20 Replies
View Related
Apr 2, 2007
I did download the newest OLE DB Provider for DB2 from the Feature Pack for SQL Server 2005 from februar 2007 that should work on an Win XP machine but I get the following error:
Could not connect to data source 'New Data Source':
Der opstod en eller flere fejl under udførslen af kommandoen.
Data descriptor mismatch. SQLSTATE: HY000, SQLCODE: -292
If I try the same thing on a Windows 2003 Server it workes.
Anybody know about this problem?
View 1 Replies
View Related
Oct 4, 2006
Hi, I want to upload some DBF files to SQL server using Integration Service.
I already check every provider, but not found provider for DBF file.
Anyone can help me?
View 5 Replies
View Related
Aug 31, 2007
The problem that I am having is that with Visual Web Developer I am creating a webpage and having it directly put online, so for example when I start a new ASP.NET page, I select the location to be HTTP, with the location http://MYWEBSERVER/Website and for the language and Visual BasicI notice a couple of things, first that there is no longer a a link under the Main toolbar "Website" selection called the ASP.NET configuration. So how can I configure what I want to have users be able to do? It seems that this choice is only available if I am building the ASP.NET page on my "localhost". So that is the first problem. So I am able to get the pages to work, atleast the things such as the textboxes to show up etc, (Even things as advanced as the "Login" box). How ever when I try to get someone to try to login I am taken to a page that has an server error. The error is:
"The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file. "
The Stack Trace Errors are at the bottom. I think this is happening because the automatically generated databases are not getting built online as they are on my computer. On my computer I have MSSQL express. So either the databases are not getting built for some reason, (and I think that is the case as I don't see any in the folder). So I think that somehow I have to create a database on my server, and then somehow configure the ASP.NET file, perhaps in the Web.Config file to look for that new database. Is this the correct methodology? Is there some simpler way that I can just somehow upload things as they are and have them work correctly on my server? The error says that either the Server did not find the database or that the trust level was insufficient. I don't think that is it as I just looked again and I don't see any .MDF files. So how would I go about getting this to work right? Is there a way to do this with MySQL also? So that I don't have to use MSSQL? My server only allows 1 DataBase for that.
Thanks and I hope my question makes sense. It is basically how can I get it to be able to create and check users etc. online?
Brian
[ProviderException: The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file.] System.Web.DataAccess.SqlConnectionHelper.EnsureSqlExpressDBFile(String connectionString) +2555237 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +87 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160 System.Web.UI.WebControls.Login.AttemptLogin() +105 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
View 1 Replies
View Related
Jan 28, 2006
Hi there
I'm trying to build a DTS package which would send data to AS400 after deleting existing data from AS400 table first. At the moment I can't make it because:
1) If I'm using "IBM DB2 UDB for iSeries OLE DB Provider" as a data source, I can't store the password in the connection which is really really strange?? Because the password isn't saved, the package can't be scheduled because someone needs to type in the password. Stupid.
2) If I'm using "iSeries Access ODBC Driver" I can't execute SQL DELETE over that connection. SELECT Works well but DELETE won't work. I'll get error message which says "HResult of 0x80040e14 (-2147217900) returned. Unexpected error occured. An error result was returned without an error message."
3) Transform Data Task fails when I'm using "iSeries Access ODBC Driver". Error message says that the number of failing rows exceeds the maximum. If I'll raise the max error number, the step executes, but 0 records are sent.
Somehow I get this feeling, that with "iSeries Access ODBC Driver" I cannot send, delete, update etc in AS400 and with "IBM DB2 UDB for iSeries OLE DB Provider" it could be done IF the password could be stored in connection.
Help anybody? How to store the password in OLE DB or how to delete & send data with ODBC connection.
-V-
View 1 Replies
View Related
Oct 22, 2007
Hi, I am trying to connect to a shared data source file: DW.RDS
But i can't get the correct connection type going, Data Source Type & Provider.
Can Anyone Assist Please!
Regards,
View 2 Replies
View Related
Mar 21, 2007
Sorry for my bad english.
I have an ssis package that contains a DateTime variable named RefDate
its value saved in the package is 8/31/2006. I setted up a Package
configuration for read the value of RefDate from the parent package.I
inserted a script task with message box to verify that the package
configuration works. When I launch the parent package the message box
shows the value of RefDate setted in the parent package. The problem
is that when I use RefDate to dynamically set the connection string of
the log connection of the SSIS log provider for XML files for the
child package, the connection string contains the child value of
RefDate.
Thanks in advance.
Renzo.
View 6 Replies
View Related
Dec 14, 2007
I tried to connect to a SAP with the .Net data provider. Either in SSIS or in C# custom code (using SapConnection class) when I try to open the connection I receive a :
The operation could not be completed.
------------------------------
ADDITIONAL INFORMATION:
A procedure imported by 'GInvoker, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' could not be loaded. (Microsoft.Adapter.SAP.SAPProvider)
------------------------------
The specified procedure could not be found. (Exception from HRESULT: 0x8007007F)
------------------------------
I doesn't matter of the connection parameter (server, user, pwd, sysnr, etc). ; I can leave it blank or fill correctly the error occurs. I guess it is a missing dll...
On the machine where I do the tries THERE is the Sap Gui installed (with the librfc32.dll in windowssystem32)
Thanks
Sandro
View 3 Replies
View Related
Oct 15, 2007
Hi Sir
In My web application i am using the ".UDL" file functionality.
<![endif]--><!--[if !vml]-->The €˜Select Provider€™ tab will be used to allow users to specify the OLE DB Provider to be used for the connection. now i am able to get all provides available in system. But i have a problem how to get the cossesponding connection tab at runtime.
please save, i am in crusial stage.
Thanks In Advance.
etlu me srinu
View 3 Replies
View Related
Mar 4, 2008
Here is what I got:
Sql 2005 std on windows 2003 server r2
tcp port 1433 set for connections in Sql 2005
Port open on firewall from DMZ 1433 can connect from web farm telneting from all IP address on port 1433 to sql both by name and IP.
the connection works 99.9% of the time.
No errors in the sql logs showing anything Firewall logs show no blocks. Windows firewall service is disabled to move that out of the troubleshooting.
connection string:
<add key="CommonConnectionString" value="server=servernameinstancename,1433;database=DBname;uid=username;pwd=mypass;Connection Lifetime=30" />
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)
View 3 Replies
View Related
