Hi,
I'm using a laptop and installing MS SQL Server 2005 has used up the very little bit of memory I had left and slowed my laptop down to the point where I forget what I was doing.
1>Can I succesfully build a database using MS access mdb files without the MS SQL 2005 installed? And what would the downside be?
I am trying to connect through ODBC connectivity, but it will not allow me to do so. I have investigated this matter. It leads me back to the server, because as I was configuring my client side database. It kept asking for the DSN(datasource name), but I was unable to choose one because there wasn't one to choose. Which is my current dilemma, How can I do this and have it available to choose from the server to satisfy the Access database?
I went to the domain where the software resides but I don't know what steps to take? I also found an interesting piece on microsoft about Kerberos, but I can't follow along according to the instructions it has. I have Access 2003 & SQL SERVER 2005, HELP...!
Basically, this is right off the heels of the install. I setup the server without the connectivity, but it is running the current configuration.
I am trying to import Access reports using Visual Studio 2005 and Access 2007. SQL Server 2005 with Reporting Services is also installed. I select Reports in the Solution Explorer and then Import Reports... Microsoft Access and browse to my Access database. After I select the database I see it open briefly as if it is trying to import the reports but then Access quickly closes and a error pops up: "You already have the database open." I have checked and double checked and the database is not open. I have even tried several different databases and the same errror occurs. Any help would be greatly appreciated.
Hi,
Users having a difficulty of accessing (Access denied) SQL-2005 integrated services after installing SQL-SP2. This was working fine prior to SP2 installation.
I found out that when I give administrator access (to the SQL box) for those users it works fine but it is not a good way to go.
I have already updated client tools to SP2 in both the server & client PCs.
Anyone have come across this situation? I really appreciate a helping hand.
Thanks
Eshaan
Hi there
Can any one tell me if i can use Access 2002 conneting to SQL? I'am getting wrong version messege in Access?
I have several areas where it will either be yes / no or enabled / disabled in the site I am working on. I remember in ACCESS there was a yes no field. Is their an equivalent to this in SQL2005 and if so, what data type should I use. I know this is a simple stupid question, but I am new to SQL and .NET. Thanks in advance for your help!!!
View 3 Replies View Relatedi am using asp.net with sql 2005.here i am having lakhs of records .when we retrive the records it became very slow. it takes long time to retrive the datas from sql.i used index,stored procedure,but no use. Any one know how to access the datas in fast manner.
View 1 Replies View Relatedhow can i export all the content of an access database into a MS SQL 2005 database, with of course similar tables ?
thank you
Is there an equivalent in sql server2005 to msaccess autonumber?
I want to be able to insert values into a table and have the pk auto generated. Have tried using NEWID() function as default value for pk field but still have to stipulate NEWID() in the insert statement.
Is there a way around this?
B
what's the best way in sql 2005 to convert a access db?
View 1 Replies View RelatedHi,
I access the sql 2000 db's . Now, the dbs have been moved to 2005. Is it possible to connect to sql 2005 db from sql enterprise manager 2000. Or let me know if I have to upgrade to 2005 to access the same.
I get the error message To connect to the server you must use sql server management studio or sql server management objects(SMO) when trying to access the server from sql enterprise manager 2000.
Usually it is not possible to access higher version dbs from a lower version.
Please help me out as soon as possible as this is very urgent.
Thanks & Regards,
K. Sripriya
I am trying to import a database from Access to SQL Server 2005 and it keeps failing. I don;t want to use anything but the simple screens Microsoft provides for Import/export. Any ideas on how I can make this happened?
- Prepare for Execute (Error)
Messages
Error 0xc0202009: {8A98B034-459D-4200-AD18-555244A05373}: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(SQL Server Import and Export Wizard)
Error 0xc020801c: Data Flow Task: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Source 64 - DP_ROUTE_DRIVER" (6918) failed the pre-execute phase and returned error code 0xC020801C.
(SQL Server Import and Export Wizard)
Does anyone know if I can't put Access 2003 and SQL 2005 on the same server together? I've got an old, well not that old, application that was farmed out coming back home and apparently it's backend is Access and the frontend is ASP, I think. Anyway, the power's that be would like to upgrade to SQL 2005 and would like everything on the same box together. I've heard rumors that's not possible... Does anyone have any ideas? Thanks a ton.
Nicole (not Anna) Smith
I have a restaurant POS application that is written in VB 6 and the data is being written to a access database. I need to access this database over the internet. I need to get certain tables (current sales) in this database to automatically send the updated data to a Web Server. My questions are: What is the best way to do this? Do I need to have sql express loaded on site and let it do the interactions with the Access server and then connect to SQL express over the internet? I am new to this and not sure of the best way to design it. Do I use Report services or analysis services to design?
Thanks
I have been wacthing several webcasts, reading blogs and articles and understanding what BI is, especillay ETL and Analysis Services, but somehow have not been able to find a solution to my problem. I have been able to understand most of the Analysis Services part of SQL Server 2005, but need help with taking data from MS Access to SQL Server to create a cube.
I have an MS Access 2003 DB with 4 tables which holds all the data from which I want to generate BI. I have just installed SQL Server 2005 Developer Edition.
Below are my questions:
1. Do I need to first make a new DB in SQL Server 2005 with a star schema and then transfer all the data from Access, or will SQL make a star schema for me when I transfer the data from Access.
2. How does one clean data during the ETL transfer process from Access to SQL. Do SSIS allow the user to do this? How?
thank you for all the help !
I'm able to connect to SQL Server 2005 express using SQL Native and see the data and create reports in MS Access 2003. But I cannot change the data, is there an option or permission I forgot? I seen multiple posts that MS Access is not the best tool for doing simple reports. What would be better? I don't want to create a Web Page etc, InfoPath?
Also, I would like to stick with SQL Server Express...
Dear,
i have a huge msaccess 2003 DB i want to transfer it to SQL 2005 , i found tool to imigrant oracle (and i used it) but i can't find solution to imugrant msaccess ??????
thanks
avner
Is there a patch available for Access 2003 that will allow it to interoperate fully with SQL 2005?
View 1 Replies View RelatedHi,
How can I access my endpoint output set of values/xml using internet explorer? I am able to access the wsdl file now I need to access the actual value returned from sql server 2005. Now i need to display it on my Internet Explorer. All the examples of microsoft leads to access using CLR. Please let me know also the difference between Get/Post with respect to EndPoints.
Thanks in Advance
Ajoy Kumar
ajoyusa@yahoo.com
I have some software that connects to SQL Server using Integrated Security in my connection string. My users are members of an active directory group. In SQL Server 2005, I've added the AD group to Logins, checked the User Mapping for the database, and checked role memberships db_datareader, db_datawriter and public.
When I look at Properties->Permissions of the database, the AD group is listed under Users or roles. I checked Connect, Execute, Select, Insert and Update are checked.
The users in the AD group still cannot access the data. 2 questions:
-Is there a log that will tell me why they're getting blocked?
-Is there a better way to give access to a new group of people?
Thanks!Brian
I am trying to read the databases attached to the Sql Server 2005.... my code works fine for Sql Server 2000 but when i try it with Sql Server 2005 it gives me error that "Under Current Settings SQL Server 2005 does not allow remote connections".
Can anybody tell me where to change these settings... i tried my best to find it but :(....
I need some help upsizing from Access2007 to SQL Server 2005 ExpressI need some URGENT HELP UPSIZINGIf you have done this before and are confident, then please can you help me, This is critical and very very URGENT I am on a dedicated server at RackSpaceWhen I try and upsize using the Wizard, it said that it cannot connect to the database, I get error number I select Upsizing to create a new database On the next screen, I select (local) database to upsize toUsername and password are already confirmed and the user exists and has been granted Admin priv to operate on the DatabaseThe error I get is:SQL State 01000SQQL server state Error2Connection failedError 08001 connection failedError 17 When I list the databases it gives me an error as above.how do I upsize correctly, what steps am I missingRegardsAndrerw
View 6 Replies View RelatedI'm a newbie to SQL Server, trying to make the leap from Access because I'm starting out grow it for my needs. I have a lot of automation stuff in Access where it does a query/code driven process for us via a macro. Sometimes the output is a report, or a form with assembled data that we use. I'm wondering if SQL Server 2005 is capable of doing automation of processes like these as well. Even if it's not necessarily a macro, something I can program, compile and have use off of my SQL Server database to do the tasks that the Access macro did.
View 1 Replies View RelatedHi SQL Team,
Data migration from MS access to Sql server 2005.
In client having existing system is MS Access. So I want to migration MS Access system to SQL server 2005.
Let suppose there MS Access one table having 10 fields.
That table data i need migrate in system (sql server 2005), but the field name are different & sql server few fields are extra suppose 15 fields or vise versa.
So can any one help me out, how to migrate the MS access to sql server system?
Please give me if any one the script or step do this.
Thanks & regards
Hello all,
I've a question regarding VS 2005 and SSIS (BIDS -- Business Intelligence Development Studio)
I will be moving the existing databases from MS-Access 2003 to Sql Server 2005. My question is I've Visual Studio 2005 Professional Edition version 80.0.50727.42 installed on my system. How do I access Sql Server 2005 , SSIS and SSRS. I mean BIDS using VS 2005?
Does Sql Server Express edition which comes with VS 2005 give me access to work with SSRS and SSIS?
All help / suggestions are highly appreciated.
Looking for an early reply.
Thanks,
Hi All,
I'm new to SQL server. Basically, I am trying to make my Access database accessible on line to my users, so I am transfering it into SQL Server and then writing a web site to use the connection to the database.
My questions are as follows:
1) How can I easily move the structure of the tables (relationships too, but content is not important) from Access into SQL?
2) I have the following query in Access which I don't believe will work in SQL because of the Sum funtion... How can I change this to work in SQL?:
SELECT DISTINCTROW Player.TeamID, Player.PlayerID, Player.SFD, Sum(Payments.Amount) AS Payment, [SFD]-[Payment] AS Due
FROM Player INNER JOIN Payments ON Player.PlayerID = Payments.PlayerID
GROUP BY Player.TeamID, Player.PlayerID, Player.SFD;
All help will be greatfully received... thanks
"In the face of adversity, I stand on the shoulders of giants..."
Hi,
I was wondering if anyone might be able to help me here. I'm very new to SQL server and has been asked to convert microsoft access database .MDB to SQL server. In another word, i'd like to migrate access to SQL Server. It's not a huge database. The size of it is roughly 6MB. The reason for migration is simply because our clients don't have microsoft office running on their system. They use SQL Server. This's a new challenge to me as i'm more comfortable with using Access now.
I have been searching and studying it thru the online tutorial about what it's and what it does. I have also downloaded and installed the SQL Server 2005 Express edition because it has GUI Interface and it does have the ability to produce reports like Access does. Now my question is how do i start because when i created the database i didn't think of any client/server application? so if i want to run the Access, i just double click it and start using it. how do i migrate it to SQL Server for a testing sake?
I really need some guidance here please.
Thank you in advance
Can anyone give me some ideas on how can i transfer data from access database to sql 2005. It is bit complicated any help will be highly appreciated.
View 1 Replies View RelatedHi there
If I give the user access dbo on 1 of the database, when he logon using SQL Server Management Studio for running query etc, can he only see his database instead of other as well system database?
Is there any best practise in term of setting the SQL client for 2005?
Thanks
Dear Gurus,
I need to do the following in SQL Server 2005:
1. Restrict access of user SA to my database
2. Encrypt contents of the whole database. Is there anything available in SQL Server 2005 (server or DB settings) which encrypt the contents. I do not want to explicitly encrypt individual columns !!
Thanks in advance
Anjum
Is it possible to connect to Sql Server 2005 using an Access 2000 adp? Ikeep trying, but it doesn't want to accept my id, even though it is right.
View 2 Replies View RelatedI am new to databases and need some info that I'm having trouble researching. I just migrated a access database to SQL server 2005 using SQL Server Migration assistant (SSMA). I wondered how SSMA handles NULL values? Also how it treats differences between Access and SQL? Any help would be appreciated.
Hi;
I can access SqlServer 2000 fine, but not SqlServer 2005. My client is on Windows XP and SqlServer 2005 (dev version) is on Windows 2003. When I run I get:
Error: net.windward.datasource.DataSourceException: JdbcDataSource could not ope
n jdbc:sqlserver://T1-Databases;databaseName=AdventureWorks;integratedSecurity=t
rue;
net.windward.datasource.DataSourceException: net.windward.datasource.DataSourceE
xception: JdbcDataSource could not open jdbc:sqlserver://T1-Databases;databaseNa
me=AdventureWorks;integratedSecurity=true;
at net.windward.datasource.jdbc.JdbcDataSource.<init>(JdbcDataSource.jav
a:1030)
at net.windward.xmlreport.RunReport.main(RunReport.java:165)
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: Invalid integratedSe
curity property value:true
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(U
nknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Sour
ce)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at net.windward.datasource.jdbc.JdbcDataSource.<init>(JdbcDataSource.jav
a:1024)
... 1 more
Exception in thread "main" net.windward.datasource.DataSourceException: net.wind
ward.datasource.DataSourceException: JdbcDataSource could not open jdbc:sqlserve
r://T1-Databases;databaseName=AdventureWorks;integratedSecurity=true;
at net.windward.datasource.jdbc.JdbcDataSource.<init>(JdbcDataSource.jav
a:1030)
at net.windward.xmlreport.RunReport.main(RunReport.java:165)
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: Invalid integratedSe
curity property value:true
at
com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(U
nknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Sour
ce)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at net.windward.datasource.jdbc.JdbcDataSource.<init>(JdbcDataSource.jav
a:1024)
... 1 more
Any ideas?
thanks - dave