MS SQL Server Indentity Jumps
Jul 20, 2005Hi All
I have a table in SQL Server with ID having indentity inrement by one.
Table has not any trigger. Frequently ID in the table jumps.
Any help !!!
Thanks
Hi All
I have a table in SQL Server with ID having indentity inrement by one.
Table has not any trigger. Frequently ID in the table jumps.
Any help !!!
Thanks
Guys,
Iam new to this forum, Hello to all...
Iam facing a problem in my application. Have recently noticed that my primary key column which is an " identity " with increment 1 being set.
But now iam noticing a various jumps in the number instead of 1. The numbers in the jump is not consistent.
Has anyone faced this kinda problem.
?????
I have a report with 30 to 100 line. I also have groups collapsed. When I expand a group, I get a postback and a 'toggle event', which causes the report to jump to the top. I would like to stay where I expanded the group. Any suggestion?
View 2 Replies View RelatedWe just switched from Sql server 2008R2 to Sql server 2012.I am facing one problem with identity Columns "When ever i restarts my sql server,the seed value for each identity column is increased by 1000 (For int identity column it is 1000 and for big int it is 10000).
"For Example if seed value of any table was 3 then after restarting sql server will be 1003 if i again restart sql server it will be 2003 and so on."
After searching on google i found that it is a new feature (don't know what is use of it) in sql server 2012 and having only two solution if you want old identity concept
1. Use sequence object -
a) I am using same database in sql server 2008 and 2012 both so can't use sequence in 2008.
b) if i go with sequence then need not change save procedure for each table,which is bulky task for us.
2. Use Trace Flag 272 (-T272)
I can go with this solution because there is need not do any changes in my application.Some one suggested me that add -T272 in startup parameter,after this sql server identity column will work normal as previous version.I did the same but it is not working.
I don't want to do any changes in my database structure.
how to use this -T272 or why it is not working.
I don't want to use this new identity feature how to suppress it. Why -T272 is not working.
Arkadiy writes "Why @@indentity returns NULL after inserting new row?"
View 6 Replies View RelatedHi folks!
I need to populate a table having an identity field with data (basically I want to make a copy of a table with identity column on another server). When I use BCP to insert data then the values in the identity field is not the same as in the data file but gets incremented from the original.
eg. if the records in the flat file are-
1, 'test1'
2, 'test2'
Now if i insert this into the table (say the last identity value was 100) then rows get inserted as-
101, 'test1'
102, 'test2'
Is there any way by which I can retain the values of the identity column to be same as in the file?
Thanks!
when I use the code
SET IDENTITY_INSERT tss_Cable ON
go
DECLARE @@nextidentval int
SELECT @@nextidentval = MIN(IDENTITYCOL) + IDENT_INCR(tss_Cable)
FROM tss_Cable t1
WHERE IDENTITYCOL BETWEEN IDENT_SEED(tss_Cable) AND 2147483646
AND NOT EXISTS (SELECT * FROM tss_Cable t2
WHERE t2.IDENTITYCOL = t1.IDENTITYCOL IDENT_INCR(tss_Cable))
go
SET IDENTITY_INSERT tss_Cable OFF
I get the following error.
error line 2 Incorrect syntax near IDENT_INCR.
error line 6 incorrent syntax near IDENT_INCR.
I would like to reset the identity without droping the table. I'm using
sql 6.5. I looked at Mark Lessard 12/17/99 respose on this issue and changed
the code to match his version but the same error occured.
How do reset identity seed on table, for example I have table that has gap in the identity such as (1,2,3,5,6, etc..) and I want reset the entire table.
Thank You,
John
What is the best way to do Indentity(1,1) on fields which is varchar(8)?
View 1 Replies View RelatedI'm doing a data transfer from Access to SQL Server, I wish to keep theidentity column (autonumber) values as all the data is already related. Itried the first table append query including the identity column, it worked.Was this fluke? Will it always work? I was under the impression that I wouldhave to issue a "set identity_insert on" before doing this. The SQL databasewill have absolutely no data before the transfer routines are run.
View 15 Replies View RelatedIDE: Visual Studio 2008
DB: SSCE 3.5
OS: WinXP SP2 (CHS)
.....
Code Snippet
String str_sql_insert = "INSERT INTO Person (Name, ShortName, Description, Tag) VALUES ('" + this.TextBox.Text.Trim() + "', '" + this.ShortNameTextBox.Text.Trim() + "', '" + this.DescriptionTextBox.Text.Trim() + "','" + this.TagComboBox.SelectedValue.ToString().Trim() + "); SELECT @@INDENTITY";
SqlCeConnection tempConn = dbman.getConn();
SqlCeCommand tempComm = new SqlCeCommand(str_sql_insert, tempConn);
tempConn.Open();
Object ob = tempComm.ExecuteScalar();
.....
When I run the application there is a error report on the last line of the code above:
[ Token line number = 1,Token line offset = 127,Token in error = SELECT ]
When I copy the SQL string into the QueryBuilder in the VS2008 it is works and returned a correct value.
I want to know is there something wrong with the sql string or the ExecuteScalar() cant execute 2 steps command?
thanks
As an example I have three tables
Table1
ChildName (nvarchar)30
ChildID (INT) Set as €˜IDENTITY€™
Table2
ParentName(nvarchar)30
ParentID (INT) Set as €˜IDENTITY€™
Table3
ChildID (INT)
ParentID (INT)
I have the following code.
Dim dbcnn As SqlClient.SqlConnection = New SqlClient.SqlConnection(dbsettings.getDatabaseString)
Dim dbcmd As SqlClient.SqlCommand
dbcmd_AddDriverRoute = New SqlClient.SqlCommand("usp_Insert", dbcnn)
dbcmd.CommandType = CommandType.StoredProcedure
dbcmd.Parameters.AddWithValue("@ChildID ", cmb_child.SelectedItem)
dbcmd.Parameters.AddWithValue("@ParentID ", "@@IDENTITY")
dbcnn.Open()
dbcmd.ExecuteScalar()
dbcnn.Close()
basically what I want to do is when a child is added I want to be able to insert ParentID (INT) Set as €˜IDENTITY€™ value into table3 ParentID (INT) .
I have my sql statement in place I am not sure how to take an identity value stored in the db.
I am working in SQL Server Master Data Services  Version 11.0.5058.0 (SP 2).
I have been asked to group all the financial attributes together. Â When I move one of the attributes up using the arrows, it works good jumping over one attribute at a time. Â Then I reach a section of attributes where it leap frogs over 24 attributes.
It appears these 24 attributes are in a subgroup but there are no attribute groups and I removed the subscription view from the entity. Â If I move one of the 24 attributes in the group, it moves it outside of the 24 attributes.
This is under leaf member attributes. Â There are no collection or consolidated groups.
i have table with one column
CREATE TABLE [dbo].[tblTest](
[ID] [int] IDENTITY(1,1) NOT NULL
how do i insert values.(i,e identity)
I would like to reset the Identity column in a table so it starts at the begining. I am planning to clean out this table.
Thanks
Gary
I'm trying something new, and have hit a snag.
basically, I'm attempting to use two INSERT commands in a single SP. I want to use the PK from the new entry and apply that to the second.
here's the code;
:::::::::::::::::::::::::::::::::::::::::::::::::: :::::::::::::::
CREATE PROCEDURE spInsertNewUser
@fn varchar(50),
@ln varchar(50),
@add varchar(50),
@add2 varchar(50),
@ct varchar(50),
@cty varchar(50),
@st varchar(4),
@pc varchar(50),
@ph varchar(50),
@cp varchar(50),
@fx varchar(50),
@em varchar(50),
@pw varchar(50),
@uid varchar(50),
@rc bit,
--@indentity int OUTPUT,
@cid int
AS
SET NOCOUNT ON
INSERT INTO tblUserInfo
(
firstName,
lastName,
address,
address2,
city,
county,
state,
postalCode,
phone,
cellPhone,
fax,
email,
pword,
userUID,
regConfirmed
)
VALUES (
@fn,
@ln,
@add,
@add2,
@ct,
@cty,
@st,
@pc,
@ph,
@cp,
@fx,
@em,
@pw,
@uid,
@rc
)
SELECT @@IDENTITY FROM tblUserInfo
--SET @indentity = @@IDENTITY
INSERT INTO tblUserToCountySubscribedLKP (
UserID, CountyID
) VALUES(
@@indentity, @cid
)
:::::::::::::::::::::::::::::::::::::::::::::::::: :::::::::::::::
I'm sure the problem is largely due to the fact that I am close to completely clueless on such things, but a bit of timely advice from the sage sql wizards here would be most welcome and greatly appreciated.
Hello folks,
I am using the following INSERT statement to add a new record in my table. I want to be able to get the Autonumber UserID field of the newly created record but I am getting the following error: "Characters found after end of SQL statement"
Code:
INSERT
INTO tblUser
(LoginName, UserPassword, EmailAddress, City)
Values
(@User, @UsrPassword, @EmailAddress, @City);
SELECT @@IDENTITY As 'Identity'
What is wrong in my statement?
How do I retrieve the Autonumber field of the newly created record?
How do I handle if the LoginName and/or EmailAddress already exists?
I want to be able save this INSERT statement as an Access Query and call it from my C# code.
I would appreciate any help.
Thanks
Mike
Hi Guys,
I'm using SQL server 2000.
How do I alter column/field from type int (with Identity = Yes Not For Replication) to just normail int field. No more identity. I want it to be done using SQL script( sql query analyzer).
Please help me on this, thx
Regards,
Shaffiq
I imported a table using DTS.
I run SQL statements in my original server database. It works well.
But when I run the same instructions within a stored procedure in my new workstation where I improrted the table I get this error:
Server: Msg 515, Level 16, State 2, Procedure InsertFichierPrix, Line 11
Cannot insert the value NULL into column 'Id', table 'myDBLive.dbo.FichierPrix'; column does not allow nulls. INSERT fails.
The statement has been terminated.
Here is the SQL statements that I run on the original Database:
insert into fichierprix(nomfichier, version, descriptionfr, typeclient,....) values(@NomFichier,'Actuelle', @NomFourFr, 'MembreAcheteur', ....)
And here is my SP that I run on the new imported database:
CREATE PROCEDURE InsertFichierPrix @NomFichier varchar(50), @NomFr varchar(50),@NomAn varchar(50)
AS
declare @NomFourFr varchar(50)
declare @NomFourAn varchar(50)
SET @NomFourFr='liste fournisseur ' + @NomFr
set @NomFourAn='liste fournisseur ' + @NomAn
insert into fichierprix(nomfichier, version, descriptionfr, typeclient,...) values(@NomFichier,'Actuelle', @NomFourFr, 'MembreAcheteur'...)
GO
And here is the execution of my Stored proc on the destination database:
execute insertfichierprix @NomFichier='myfilename2', @NomFr='fournifr1',@NomAn='Fourniang1'
Thank you for helping me.
Hi,When i eg. manually ad entries to a table and, cancels the insert Ms SQLincrement the counter on the ID anyway. Is there a way to avoid thisbehavior?RegardsAnders
View 1 Replies View RelatedI am trying to remove the Indentity property from a column so I can do some clean up. Then will need to add it back. Adding Indentity property back is not a problem, but cant figure out how to remove it in the first place.
Any help would be greatly apprecaited.
Thanks
Dave
Hello, everyone:
I have a table with an indentity column as first column. At beginning it is continue such as 0-50. I delete last 20 columns by hand. The 0-31 is left. When the new data is inserted, I hope the new indentity column begin from 32. How to do that? Now the indentity column begin from 51 as the new data is inserted.
Thanks a lot
ZYT
Hi There
Can anyone tell me how an identity column decides what number to give which row.
I always thought that it was in order of the clustered index.
But i have found the following:
If you have Table A with a clustered index(not unique) say on the first 3 columns.
If the table is empty and you add an identity column, then afterward load it with data the value of the identity column seems to match the clustered index.
But if the table has no identity column and it is filled with data, and then you add an identity column the number for the identity column seems to be all over the place.
So basically how does a newly added identity column know what number to give each row, what if the clustered index is not unique? Is it random ?
Thanx
Dear Friends,
I need a SQL Query to add a identity coloumn for anExisting table. (ie) when i try to alter the table i want to add an identity coloumn.
Thanks in advance.
My server is a dual AMD x64 2.19 GHz with 8 GB RAM running under Windows Server 2003 Enterprise Edition with service pack 1 installed. We have SQL 2000 32-bit Enterprise installed in the default instance. AWE is enabled using Dynamically configured SQL Server memory with 6215 MB minimum memory and 6656 maximum memory settings.
I have now installed, side-by-side, SQL Server 2005 Enterprise Edition in a separate named instance. Everything is running fine but I believe SQL Server2005 could run faster and need to ensure I am giving it plenty of resources. I realize AWE is not needed with SQL Server 2005 and I have seen suggestions to grant the SQL Server account the 'lock pages in memory' rights. This box only runs the SQL 2000 and SQL 2005 server databases and I would like to ensure, if possible, that each is splitting the available memory equally, at least until we can retire SQL Server 2000 next year. Any suggestions?
Hi,
We have an old machine which holds SQL server 2000 database. We need to migrate a whole database to a new machine which has SQL server 2005.
When we tried to move whole database using Import and Export Wizard, only tables can be selected to import/export. However we want to import/export the whole database, including tables, stored procedure, view, etc. Which tool should we use?
Thanks.
Hi,
We have an old machine which holds SQL server 2000 database. We need to migrate a whole database to a new machine which has SQL server 2005.
When we tried to move whole database using Import and Export Wizard, only tables can be selected to import/export. However we want to import/export the whole database, including tables, stored procedure, view, etc. Which tool should we use?
Thanks.
Hi,
When I am trying to access SQL Server 2000 database from another machine i got this error
Server: MSg 17, Level 16, State 1 [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied
but I could access the database on same server and in that server i could access other databases in different server.
Hi All,
View 14 Replies View RelatedHi,
View 36 Replies View RelatedWhen I proposed start to use SQL Server 2005 for new VS 2005 web sites, one of my co-workers responded that
we will update the old SQL Server 2000 databases to SQL Server 2005 when we are ready to use 2005 SQL Server.
Questions:
1. Any expected problems to upgrade old 2000 databases to new 2005 SQL Server?
2. I have installed both 2005/Management Studio Express and 2000/Enterprise Manager in my PC. Any expected
problems when running both 2000 and 2005 SQL Server at the same database server?
3. What is the best configuration for running SQL Server 2005 when we have old 2000 databases? Upgade or not upgrade?
TIA,
Jeffrey
I am getteing
need help
Query analyzer error Unable to connect server local Msg17, level 16,state 1
ODBC SQL server driver [DBNETLIB]SQL server does not exist
Hi,
I am having a problem connecting my .net applications from the application server to the database server. When I run the application from my windows xp (sp2) box it works fine. When I try to connect via SQL Management Studio to the database server from the application server I get the same error.
Here is the error:
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Here is the Environment:
App Server:
Windows Server 2003 Standard Edition
Inside Company's Firewall/ Network
Database Server:
Windows Server 2000 Advanced Edition
SQL Server 2000 SP4
Remote Connections to the Server is checked
Enable Protocols: Named Pipes & TCP/IP
TCP/IP Port: 1402 (I don't know why it isn't the default of 1433)
The db server is sitting out side the Company's firewall (don't ask me why). I can access it fine from inside the firewall on my XP box but not from windows server 2003. There is a web server outside the our network that also connects to the db server with no problem and that is running Windows Server 2003 Web Edition.
I can ping the db server from the app server using the IP address.
I tried using the IP address and the port 1402 in my connection string but that didn't work from any machine (XP and Server).
I imagine the issue is somehow related to the company's firewall but why would it only block Windows Server 2003 and not XP?
What do I tell the network admin to change?
Any help would be appreciated.
Thanks,
Oran