MS SQL Server Service Manager Does Not Find Instance
Jul 23, 2005
I am running Win XP SP2 and MSDE 2000 SP3a. The user is logging on as
a POWERUSER. When the user logs on the MSSQLSERVER service starts but
the SQL Server Service Manager, that runs in the system tray, shows
that the instance has not started. The field that displays the
instance name is blank and it is not listed in the drop down list.
The MSSQLSERVER service is set to start with a Windows domain
administrator account. The SQL server can be accessed by a remote
computer through Enterprise Manager. The local programs cannont
interact with the server though.
Does anyone know if I could grant some user access rights to allow MSDE
to work under a POWERUSER login?
I installed MSDE2000 with named instance on top of MSDE 7.0 and rebooted the system. The “SQL Server Service Manager” comes up with default server( MSDE7.0).
But I need “SQL Server Service Manager” has to come up with new instance name and the new server automatically after reboot.
I didn’t see any problem in connecting to instance name if I choose it from the server list. But user wants to see the server with instance name by default when system restarts. Do you have any idea about this?
IF someone can assist me. Everytime I load up enterprise manager the service manager turns off. And the enterprise manager can't connect to the local database. But everytime i turn it back on and try to connect again it shuts it off and around and around we go. Help would be appreciated. Thanks.
I installed SQL Server Express and SQL Server manager, then tried to start manager. SQL Service is running, but SQL Manager attempt to connect to SQL Server instance times-out even though I correctly identify instance as SQLEXPRESS? Everything seems to be normal - both SQL Server and Manager are on a single Windows XP home machine. Any suggestions. Thanks
Hello All, please be gentle im very new to this stuff.. So if i add a record via a sql datasource using the ConnectDB connection string it adds it the the sql 2005 database called intranet.... If i try to add to it using an onbuttonlick(Code Below) event it comes up with the "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) "I have set remote connections on and tryed it with TCP/IP and TCP/IP and Named Pipes. SQL is installed as the default instance. If both ways are using the same connection string surely it should work? Im not to sure where i am going wrong here...Here is the code for the on button click event.. 'INSERT NEW EMAIL INTO NEWSLETTER TABLE
1: 2: 3: 4: 5: 6: 7: 8: 9: 10: 11: 12:
Protected Sub AddEmailButton_Click(ByVal sender As Object, ByVal e As EventArgs) Handles AddEmailButton.Click Dim ConSTRING As String = ConfigurationManager.ConnectionStrings("ConnectDB").ConnectionString 'INSERT NEW EMAIL INTO NEWSLETTER TABLE Dim cn As SqlConnection = New SqlConnection(ConSTRING) Dim InsertSQL As String = "INSERT INTO Newsletter (Name, Email) VALUES (@Name, @Email)" Dim cmd As SqlCommand = New SqlCommand(InsertSQL, cn) cmd.Parameters.AddWithValue("@Name", (TBname.Text)) cmd.Parameters.AddWithValue("@Email", (TBemail.Text)) cn.Open() cmd.ExecuteNonQuery() LBLstatus.Text = "Success, Email is now on Mailing List" cn.Close()
Below is my web.config connection string<connectionStrings> <remove name="LocalSqlServer" /> <add name="ConnectDB" connectionString="Data Source=10.130.0.11;Initial Catalog=intranet;User ID=XXXXX;Password=XXXXX;" providerName="System.Data.SqlClient" /> </connectionStrings>
Any help on this would be great as im stuck.. Best Regards Leigh
Where is the icon for the SQL Server Service Manager? I'm reading the Access 2003 Bible and I want to test accessing SQL Server, and I'm not sure where it installs that. Thanks!
After installing SQL Server Express Advanced 2012 64-bit edition, we are unable to see the 64-bit Server Network Configuration in the left pane. Â We need to edit the TCP/IP and Named Pipes to enable them. Â All that is showing is the 32-bit instance for our Acronis backups.how to view or add a SQL server instance to the Server Network Configuration msc?
We have two instances of SQL Server 2005 - SP1 installed on one server. The default instance starts very slowly. When looking at the log I can see the delay is due to Resource Manager based upon the following error.
I have a VM with SP2013 and SQL Server 2012 SP1. I have installed the powerpivot plugin SP1.But when I run the PowerPivot for SharePoint 2013 configuration tool.
I have a initiator and a target service broker peer.
Both are controlled by a C# unit test. The initiator uses the Microsoft.Samples.SqlServer class. The target service uses stored procedure activation.
Sending a message from the initiator to the target, saves the content of the message, along with its conversation handle in the target's database specific table.
The unit test needs - at a later time - to instruct the target to send a message back on the same conversation handle to the initiator service.
For this the C# unit test creates a Conversation off of the saved conversation handle:
Service client = new Service("cleintservicename", conn, tran);
Conversation dialog = null;
dialog = new Conversation(client, convHandle); Sending the message on this dialog generates an error "Message body: <Error xmlns="http://schemas.microsoft.com/SQL/ServiceBroker/Error"><Code>-8495</Code><Description>The conversation has already been acknowledged by another instance of this service.</Description></Error>". Is the error due to the fact that a service - using the activated stored procedure already picked up the conversation, so that a new reference to the service can not be created through the Service class in CLR? If so, I might need then to skip the activated stored procedure in favor or a CLR service, alltogether? Any help - greatly appreciated.
I have configured an instance to use static port, say 1435, and I turned off the Browser service.
I would like to know if I can use SSMSE to connect to the instance database directly. The instance is listening at port 1435 and accepting connection requests from other methods.
What I need to put into the "Server name: " field?
Normally, it would be like: <serverIP><InstanceID> with Browser turned on.
Now how do I add the port information to it, I tried
When I open up the SQL Server Service Manager I see 3 Servers in the drop down list box. The third one does not exist. How can I remove it from the drop down list box? Thanks
On one of our machines, all of the SQL Server 2000components except for the main Server component (SQL Servercore) itself were installed (Management tools, etc) a while agoand everything was running fine. Now I go and add/install theServer component and then Service Pack 3a.It seems that Service Manager won't start up (I get an hourglass cursor)and now I find that Enterprise Manager won't run as well. No errormessages appeared and I don't think I saw anything unusual inthe log file.However, I can use Enterprise Manager on a differentmachine and connect to the database (so the databaseitself seems to be running).Any suggestions as to what the problem might be and how tofix it? I like to see if I can repair this without havingto do a reinstall.Thanks.PF
I have an interesting situation here. I have a SQL Server 2000 database which is attached to SQL Server 2005. The database (SQL 2000) however only has service pack 3 applied. I need to apply SP4 before I can move forward with SQL 2000->2005 upgrade. The question: can I somehow apply this support package with my current configuration or should I install full SQL 2000 front-end anew (which I don't have at the moment)? Whenever I try to run SQL 2000 SP4 it complains "SQL Server 2000 is not installed on this machine."
The server I try to install the update is Windows Server 2003 R2 Standard Edition x64. SQL Server 2000 database itself is x86 (obviously).
SQL Server Enterprise Manager could not start the service 'MSDTC' on server'NTAS21'.1722 - (The RPC server is unavailable)I Setup A publication on a server called NTAS4D, then Pushed TheSubscription to another server called NTAS21. If I configure so that thechanges at the subscriber are not replicated to the publisher, all works ok,I make a change at the publisher, it is replicated to the subscriber.If I configure for updating at the subscriber, I am presented with a screenstating that the following services must be started for replication to work:SQL Server Agent on NTAS4D - RunningMSDTC on NTAS4D - RunningMSDTC on NTAS21 - UnknownWhen I complete the wizard, I receive the message listed above.The Servers are in two separate locations, each behind a NAT enabled routerusing the internet to transfer data between the publisher and subscriber.Any Suggestions will be greatly appreciated.ThanksSteve
Hi there. I am new to the SQL Express. I just finished installing the SQL Express 2005 with Advanced Services on a Windows XP SP2 computer. The first thing I noticed was the service manager (used to be on the taskbar) was being removed on the Express Edition. How do I get this feature back if it's even possible? I know you can find out the server status from the Configuration Manager but it's handy if the status is showned on the taskbar after logging in.
I have been getting this message in the event viwer and my SQL server goes down. I have to go and start the service once again. Can somebody throw some light as how to solve this problem?
ver: SQL-DMO Version: 8.00.760I have the option to automatically start SQL Server on startup, butwhen it does start up, the SQL Server Service Manager does not havethe green arrow indicating that it is active. When I double-click itto display the SQL Server Service Manager, it shows the name of theserver, but no services in the drop-down box.When I start Enterprise Manager I see an instance of MSDE wheresomeone installed an MSDE application. That is active. But I have to"connect" to the localhost. The instance name is the name of the MSDEapplication. I would like it to connect to the localhost on startup.Any ideas on how to correct this problem?Thanks,RBollinger
When I opened "Reporting Service Configuration Manger" from SQL server configuration tool list, The "Report Server Installation Instance window came out. It showed my local machine name on the field of Machine Name. When I click "Find" button, a message box came out. It says: "No report server were found on the specified machine. Details: Invalid namespace
If I install a new named instance of SQL Server 2008 R2 on a machine that already has 3 named instances that are upgraded to service pack 3, will the install of the new instance overwrite any of the current SP3 files? Will I have to re-apply SP 3 to the existing instances?
Installing MSDE (SP3) on a clean updated Win-XP system with all the latest fixes installed unsuccesfully. A clean systems means a fresh installed Win-XP, updated all using webupdate. And Excel 2003 installed. Thats all (not even AntiVirus (yet))
I just start to learn SQL server now. I am trying to migrate data from oracle to SQL server 2005 using SQL server migrant assistant for Oracle. But I don't know how to fiill this connection details
SQL Server host:
<ServerHost>
SQL Server port (leave empty if default):
<8888>
SQL Server instance name (leave empty if default):
I apologize if this is not the correct forum for this posting. Looking at the descriptions, it appeared to be the best choice.
I am running Windows XP Pro SP2. I have installed the SQL Native Client for XP. However, when I try to add a new data source through ODBC Connection Manager, SQL Native Client is not listed as an option. I have followed this procedure on three other systems with no problems. What would be causing the SQL Native Client to not show up in the list of available ODBC data sources?
I'm running an SSIS package and I want to be able to skip instances that are stopped. Is there anyway that I can do a SELECT on some SERVERPROPERTY that would tell me if the instance is stopped?
Also, I was wondering about a delete from each table. I have each row timestamped in multiple tables. What could I do to set up a job to delete from each table rows after a certain timestamp?
I have done a fresh sql 2012 standalone installation but the instance services are not getting reflected in SQL server configuration manager
Although I can find the instance details in services.msc and also in n/w configuration of configuration manager but in the sql services tab of config manager , it is not showing .
The hide instance is unchecked when I check the protocol properties.
Is there anyway that I can find out the time an instance went offline? Does the last entry in the error logs show this? One on my instances went down during the night and I need to know the time this happened if possible.
After I install Reporting Service for SQL 2000, it will establish two virtual directory in IIS: Reports and ReportServer.and I can manage the Reporting Service with Report ManagerBut after I install Sql2005 and with Reporting Service Selected, I can't find these virtual directory. How can I manage the Reporting Service of Sql2005?
Hi, I hope someone can help me! I changed the TCP port that the default instance of SQL 2005 x64 SP1 is listening on and now SQL server won't start as the port is being used - no problem I say to myself, I'll just change it again, however I can't!
My problem is that I can not change the TCP Port back again using Configuration Manager - no matter what values I put in, after a restart of the instance it comes up with this in the IP Addresses tab for TCP/IP Properties and SQL Server won't start:
IP1 Active Yes Enabled No IP Address aaa.bbb.ccc.111 TCP Dynamic Ports TCP Port 0
IP2 Active Yes Enabled No IP Address aaa.bbb.ccc.222 TCP Dynamic Ports TCP Port 0
IP3 Active Yes Enabled No IP Address aaa.bbb.ccc.333 TCP Dynamic Ports TCP Port 0
IP4 Active Yes Enabled No IP Address 10.1.1.1 TCP Dynamic Ports TCP Port 0
IP5 Active Yes Enabled No IP Address 127.0.0.1 TCP Dynamic Ports TCP Port 0
IPALL TCP Dynamic Ports 2020 TCP Port 2020
Interestingly, the ip address that the server is listening on aaa.bbb.ccc.444 is not reported in the list of IP addresses in the configuration manager for this instance, yet it is when I view the available IP addresses for the other two instances - is this significant?
I have tried failing to the other node, changing it there, changing it at the console and also while logged onto the the virtual machine remote desktop, rebooting both nodes, etc, etc. There are two other instances on this cluster that are still working fine but I hvae not attempted to change the TCP ports they listen on.
I used the same method to change this default instance as I did for a named instance on a similarly configured cluster and it worked fine. How to fix this?
Regards, Mike
2007-02-27 12:03:17.69 Server Server is listening on [ aaa.bbb.ccc.444<ipv4> 2020]. 2007-02-27 12:03:17.71 spid9s Starting up database 'tempdb'. 2007-02-27 12:03:17.72 Server Error: 26023, Severity: 16, State: 1. 2007-02-27 12:03:17.72 Server Server TCP provider failed to listen on [ aaa.bbb.ccc.444<ipv4> 2020]. Tcp port is already in use. 2007-02-27 12:03:17.75 Server Error: 17182, Severity: 16, State: 1. 2007-02-27 12:03:17.75 Server TDSSNIClient initialization failed with error 0x2740, status code 0xa. 2007-02-27 12:03:17.75 Server Error: 17182, Severity: 16, State: 1. 2007-02-27 12:03:17.75 Server TDSSNIClient initialization failed with error 0x2740, status code 0x1. 2007-02-27 12:03:17.75 Server Error: 17826, Severity: 18, State: 3. 2007-02-27 12:03:17.75 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log. 2007-02-27 12:03:17.77 Server Error: 17120, Severity: 16, State: 1. 2007-02-27 12:03:17.77 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I'd like to set up a Service Broker queue in one database (dbRespond) on a server so that events in another database (dbEvent) on the same server instance can post messages to the queue. The problem I'm having is that:
The BEGIN DIALOG CONVERSATION needs to reference a Contract that is in the current database, and I want to call BEGIN DIALOG CONVERSATION from dbEvent The target service is in dbRespond. Based on the "Hello World" Service Broker example that comes with SQL 2005, in dbRespond I need to specify the contract in the CREATE SERVICE call that creates the target service. Here, too, the contract must be defined in the current database. How do I deal with needing to have the same one contract in two different databases?
