Hi,
Do you know how to write stored procedures inside another stored procedure in MS SQL.
Create procedure spMyProc inputData varchar(50)
AS
----- some logical
procedure spMyProc inputInsideData varchar(10)
AS
--- some logical
--- go
-------
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
Can I invoke stored procedure stored inside from a user defined table column?
View 5 Replies View RelatedHi everybody,I am trying to alter a view inside a Stored Procedure and sql server is not allowing me to do so.Can we not have an alter view inside a Stored Procedure?Here is the code: CREATE PROCEDURE dbo.[UPDATE_VIEW_LINEITEMALLOTMENT] -- Add the parameters for the stored procedure here@MAINID int,@BE VARCHAR(8)ASBEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. --SET NOCOUNT ON; ALTER VIEW [Budget_Management_System].[dbo].[LineItem_OCAFund] AS SELECT TOP (100) PERCENT SUM(dbo.ALL_OCAFUND.AMOUNT) AS Expr2, dbo.APP_LINEITEM.LINENUM, dbo.APP_LINEITEM.PC, dbo.APP_LINEITEM.CATEGORY, dbo.APP_LINEITEM.ROWID, dbo.APP_LINEITEM.MAINID FROM dbo.APP_LINEITEM INNER JOIN dbo.ALL_ORG ON dbo.APP_LINEITEM.ROWID = dbo.ALL_ORG.LINEITEMID INNER JOIN dbo.ALL_OCAFUND ON dbo.ALL_ORG.ROWID = dbo.ALL_OCAFUND.ORGID INNER JOIN dbo.APP_AMENDMENT ON dbo.ALL_ORG.AMENDMENTID = dbo.APP_AMENDMENT.ROWID AND dbo.ALL_OCAFUND.AMENDMENTID = dbo.APP_AMENDMENT.ROWID GROUP BY dbo.APP_LINEITEM.LINEORDER, dbo.APP_LINEITEM.BE, dbo.APP_LINEITEM.MAINID, dbo.APP_LINEITEM.LINENUM, dbo.APP_LINEITEM.PC, dbo.APP_LINEITEM.CATEGORY, dbo.APP_LINEITEM.ROWID, dbo.APP_AMENDMENT.AMENDMENTORDER HAVING (dbo.APP_LINEITEM.BE = @BE) AND (dbo.APP_LINEITEM.MAINID = @MAINID) AND (dbo.APP_AMENDMENT.AMENDMENTORDER = 1) ORDER BY dbo.APP_LINEITEM.LINEORDER ENDthanks a lot,Murthy here
View 7 Replies View RelatedI have created a cursor using the following type of syntax:
DECLARE MyCursor CURSOR FOR
SELECT ID FROM tblEmployees
OPEN MyCursor
BEGIN
FETCH NEXT FROM MyCursor
END
CLOSE MyCursor
Instead of the SELECT statement (SELECT ID FROM tblEmployees), I actually have a very complex select statement. I have created a stored procedure to handle this select. However, I cannot find a way to call a stored procedure in place of the SELECT statement in the cursor. Is this possible? Thanks.
I am working on a technical design of data integration ETL package which will be moving data from SQL Server Source to DB2 destination. I currently have two options, when moving data to DB2(IBM AS400). I can call a AS400 Stored Procedure, and pass in the data to the stored procedure, and perform the insert processing within the AS400 environment or I could do inserts from SSIS in a DFT and write individually to AS400 tables. My question is from a performance and good practice perspective, which method should I move forward with. I need a possible list of pros- and cons when using AS400 Sproc vs using SQL within SSIS? I would really appreciate response from individuals who have done something similar in the past. Thanks a lot and I am really looking forward to responses.
Seems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID, S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName', T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID FROM [Item].ItemDetails I INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID FROM [Item].ItemDetails IOr something like that... Any thoughts?
View 3 Replies View RelatedGreetings:
I have MSSQL 2005. On earlier versions of MSSQL saving a stored procedure wasn't a confusing action. However, every time I try to save my completed stored procedure (parsed successfully ) I'm prompted to save it as a query on the hard drive.
How do I cause the 'Save' action to add the new stored procedure to my database's list of stored procedures?
Thanks!
Hi.here is my code with my problem described in the syntax.I am using asp.net 1.1 and VB.NETThanks in advance for your help.I am still a beginner and I know that your time is precious. I would really appreciate it if you could "fill" my example function with the right code that returns the new ID of the newly inserted row.
Public Function howToReturnID(ByVal aCompany As String, ByVal aName As String) As Integer
'that is the variable for the new id.Dim intNewID As Integer
Dim strSQL As String = "INSERT INTO tblAnfragen(aCompany, aName)" & _ "VALUES (@aCompany, @aName); SELECT @NewID = @@identity"
Dim dbConnection As SqlConnection = New SqlConnection(connectionString)Dim dbCommand As SqlCommand = New SqlCommand()dbCommand.CommandText = strSQL
'Here is my problem.'What do I have to do in order to add the parameter @NewID and'how do I read and return the value of @NewID within that function howToReturnID'any help is greatly appreciated!'I cannot use SPs in this application - have to do it this way! :-(
dbCommand.Parameters.Add("@aFirma", aCompany.Trim)dbCommand.Parameters.Add("@aAnsprAnrede", aName.Trim)
dbCommand.Connection = dbConnection
TrydbConnection.Open()dbCommand.ExecuteNonQuery()
'here i want to return the new ID!Return intNewID
Catch ex As Exception
Throw New System.Exception("Error: " & ex.Message.ToString())
Finally
dbCommand.Dispose()dbConnection.Close()dbConnection.Dispose()
End Try
End Function
We recently upgraded to SQL Server 2005. We had several stored procedures in the master database and, rather than completely rewriting a lot of code, we just recreated these stored procedures in the new master database.
For some reason, some of these stored procedures are getting stored as "System Stored Procedures" rather than just as "Stored Procedures". Queries to sys.Objects and sys.Procedures shows that these procs are being saved with the is_ms_shipped field set to 1, even though they obviously were not shipped with the product.
I can't update the sys.Objects or sys.Procedures views in 2005.
What effect will this flag (is_ms_shipped = 1) have on my stored procedures?
Can I move these out of "System Stored Procedures" and into "Stored Procedures"?
Thanks!
Just wonder whether is there any indicator or system parameters that can indicate whether stored procedure A is executed inside query analyzer or executed inside application itself so that if execution is done inside query analyzer then i can block it from being executed/retrieve sensitive data from it?
What i'm want to do is to block someone executing stored procedure using query analyzer and retrieve its sensitive results.
Stored procedure A has been granted execution for public user but inside application, it will prompt access denied message if particular user has no rights to use system although knew public user name and password. Because there is second layer of user validation inside system application.
However inside query analyzer, there is no way control execution of stored procedure A it as user knew the public user name and password.
Looking forward for replies from expert here. Thanks in advance.
Note: Hope my explaination here clearly describe my current problems.
I am writing a set of store procedures (around 30), most of them require the same basic logic to get an ID, I was thinking to add this logic into an stored procedure.
The question is: Would calling an stored procedure from within an stored procedure affect performance? I mean, would it need to create a separate db connection? am I better off copying and pasting the logic into all the store procedures (in terms of performance)?
Thanks in advance
John
hi all,
i'm wondering if i can use one stored procedure in too cases, this is the senario:
i have stored procedure for admin and another one for user, they have the same select everything is the same except that in admin SP i have where @admin = admin and for user i have where @user = user
if there a way to use if and else to make this happen
this is what i did so far:
CREATE PROCEDURE [test] @admin INT, @user INT, @indexType INT as
if @indexType = 1
begin
SELECT * FROM table WHERE something IN (SELECT * FROM anothertable where admin = @admin)
end
else
begin
SELECT * FROM table WHERE user = @user
end
GO
any suggestion will be very helpful
thanks
I want to execute some insert statements within a stored procedure and commit those changes regardless of any raiseerror that occurs later in the stored procedure. My difficulty is that I am forced to use raiseerror with severity 16 in order to send a message through the powerbuilder application interface (compiled vendor code). I have tried save points but can't get that to save my insert and still present an error to the user about something else that happens later.
here is an example
BEGIN procedure
Insert something and save it even if error is raised below
RaiseError('you made a mistake and need to do this.',16,-1)
END procedure
Hi folks
I nead to call a stored procedure in a where statemene, but MSSQL dont like that.
My problem is that the StoredProcedure is calling itself recursive and therfore its impossible to add the code as a standard SELECT statement. Here is the code
ALTER PROCEDURE dbo.advsp_FilterRecordRights
@RequesterGUID Char(20),
@EntityGUID Char(20)
AS
BEGIN
if not Exists(Select *
from GUIDRightsH
where GUIDRightsH.EntityGUID = @EntityGUID and
GUIDRightsH.RequesterGUID = @RequesterGUID and
GUIDRightsH.RecProp <> 0)
Begin
Return 1
end
if not Exists(Select *
from UsergroupMembers
where UserGroupMembers.UsergroupGUID = @RequesterGUID and
dbo.advsp_FilterRecordRights(UserGroupMembers.UserGUID,@EntityGUID) = 1)
Begin
Return 1
end
Return 0
END
I used to do this with classic asp but I'm not sure how to do it with .net.Basically I would take a table of Categories, Then I would loop through those. Within each loop I would call another stored procedure to get each item in that Category. I'll try to explain, Lets say category 2 has a player Reggie Bush and a player Drew Brees, and category 5 has Michael Vick, but the other categories have no items.Just for an example.. Category Table: ID Category1 Saints2 Falcons3 Bucaneers4 Chargers5 FalconsPlayer Table:ID CategoryID Player News Player Last Updated1 1 Reggie Bush Poetry in motion 9/21/20062 1 Drew Brees What shoulder injury? 9/18/20063 5 Michael Vick Break a leg, seriously. 9/20/2006 Basically I would need to display on a page:SaintsReggie BushPoetry in MotionFalconsMichael VickBreak a leg, seriously.So that the Drew Brees update doesnt display, only the Reggie Bush one, which is the latest.I have my stored procedures put together to do this. I just don't know how to loop through and display it on a page. Right now I have two datareaders in the code behind but ideally something like this, I would think the code would go on the page itself, around the html.
View 1 Replies View RelatedBasically I have two strings. Both strings will contain similar data because the 2nd string is the first string after an update of the first string takes place. Both strings are returned in my Stored Procedure
For example:String1 = "Here is some data. lets type some more data"String2 = "Here's some data. Lets type some data here"I would want to change string2 (inside my Stored Procedure) to show the changed/added text highlighted and the deleted text with a strike though.
So I would want string2 to look like thisstring2 = "Here<font color = "#00FF00">'s</font> <strike>is</strike> some data. <font color = "#00FF00">L</font>ets type some <strike>more</strike> data <font color = "#00FF00">here</font>"
Is there an way to accomplish this inside a stored procedure?
This example is working:
Declare @startRowIndex INT; set @startRowIndex = (@PagerIndex * @ShowMembers); With BattleMembers as ( SELECT TOP 20 ROW_NUMBER() OVER (ORDER BY LastActivityDate DESC) AS Row, UserId, UserName FROM aspnet_Users) SELECT UserId, UserName FROM BattleMembers WHERE Row between @startRowIndex and @startRowIndex+@ShowMembersEND
and this one doesn't work:USE [xx]GOSET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOALTER PROCEDURE [dbo].[battle_Paging]@PagerIndex INT,@ShowMembers INT ASBEGINDeclare @startRowIndex INT; set @startRowIndex = (@PagerIndex * @ShowMembers); With BattleMembers as ( SELECT TOP 20 ROW_NUMBER() OVER (ORDER BY aspnet_Users.LastActivityDate DESC) AS Row, aspnet_Users.UserId, aspnet_Users.UserName, mb_personal.Avatar FROM aspnet_Users LEFT JOIN mb_personal ON (mb_personal.UserID=aspnet_Users.UserId) SELECT UserId, UserName, Avatar FROM BattleMembers WHERE Row between @startRowIndex and @startRowIndex+@ShowMembersEND
Error:Msg 156, Level 15, State 1, Procedure battle_Paging, Line 18Incorrect syntax near the keyword 'SELECT'.
I try to join in the table mb_personal here. Some help would be very appreciated! Thanks.
Hello, I have a situation that I query a table and return multiple rows (email addresses). I want to iterate through the rows and concatenate all email addresses into one string (will be passing this to another stored procedure to send mail). How can I process result rows inside a stored procedure? This is what I have so far: CREATE PROCEDURE [dbo].[lm_emailComment_OnInsert] @serviceDetailID int,@comment varchar(500),@commentDate DateTime,@commentAuthor varchar(100)ASBEGINDECLARE @serviceID intDECLARE @p_recipients varchar(8000)DECLARE @p_message varchar(8000)DECLARE @p_subject varchar(100)/* Grab the Service_id from underlying Service_Detail_id*/SELECT @serviceID = Service_id FROM lm_Service_Detail WHERE Service_Detail_id = @serviceDetailID/* Get email addresses of Service Responsible Parties */
SELECT DISTINCT dbo.lm_Responsible_Party.EmailFROM dbo.lm_Service_Detail INNER JOIN
dbo.lm_Service_Filing_Type ON dbo.lm_Service_Detail.Service_id = dbo.lm_Service_Filing_Type.Service_id INNER JOIN
dbo.lm_Responsible_Party_Filing_Type ON dbo.lm_Service_Filing_Type.Filing_Type_id = dbo.lm_Responsible_Party_Filing_Type.Filing_Type_id INNER JOIN
dbo.lm_Responsible_Party ON dbo.lm_Responsible_Party_Filing_Type.Party_id = dbo.lm_Responsible_Party.Party_idWHERE (dbo.lm_Service_Detail.Service_Detail_id = @serviceDetailID)/* Build message */
SET @p_subject = "KLM - Service ID: " + CAST(@serviceID AS varchar(4))SET @p_recipients = "" /*need string of addresses*/
SET @p_message = @p_message + "Service Detail ID: " + CAST(@serviceDetailID AS varchar(4)) + char(13)SET @p_message = @p_message + "Comment Date: " + CAST(@commentDate As varchar(25)) + char(13)SET @p_message = @p_message + "Comment Author: " + @commentAuthor + char(13)SET @p_message = @p_message + "Comment: " + @comment + char(13)PRINT "subject: " + @p_subject + char(13)PRINT "recip: " + @p_recipients + char(13)PRINT "msg: " + @p_message + char(13)/*Send the email*/
Execute master..xp_sendmail @recipients = @p_recipients, @message = @p_message, @subject = @p_subject END
GO
I am having problem with 'TOP @pageSize'. It doesn't work, but if I replace it by 'TOP 5' or 'TOP 6' etc., then the stored procedure runs without errors.
Can someone please tell me how I could use @pageSize here so that it dynamically determines the 'n' of 'TOP n' ?
ALTER PROCEDURE dbo.spGetNextPageRecords
(
@pageSize int,
@previousMaxId int
)
AS
/* SET NOCOUNT ON */
SELECT Top @pageSize ProductId, ProductName
FROM Products
WHERE (ProductID > @previousMaxId) order by ProductId
RETURN
Hello :) I need to do something like this:
CREATE PROCEDURE SelectCostumers @name varchar(100)
Declare @SQL = "SELECT Id, Name FROM Costumers"
AS
IF (@name IS NULL)
@SQL
ELSE
@SQL += "WHERE Name LIKE @name"
See, what I need is a string variable that I can concatenate with whatever I want depending on the parameter I get.
Thank you
I am trying to creating a table inside a stored procedure using SQL that works fine in Query Analyzer. However, when I check the syntax I get the following message:
Error 208: Invalid object name '##OPTIONSEX'
I am using the following SQL script:
CREATE PROCEDURE [dbo].[Test2] AS
CREATE TABLE ##OPTIONSEX
(
OPTION_PLAN VARCHAR(50),
TOT_OPTIONS_EXCHANGED FLOAT NULL
)
GO
INSERT ##OPTIONSEX
SELECT
B.COMPONENT,
TOT_OPTIONS_EXCHANGED = SUM(A.UNITS)
FROM TBLEXERCISEOPTIONS A, TBLCOMPONENT B
WHERE B.COMPONENTID = A.COMPONENTID
GROUP BY B.COMPONENT
GO
Any help getting this to run correctly would be appreciated.
Hi Folks!
I have a cursor inside a stored procedure that should identify rows based on certain criteria and update the columns on those records.
While I try to do so, the cursor goes into an infinite loop although I have only 1 record that matches my criteria. I think that the transaction is not commited and the cursor is picking up the same record for update.
Here is my sample record in table :tblMsg
SenderRef <space> MsgStatusId <space> MsgType <space>Groupid
1281341<space> 1 <space>KBC-NON-ETC-MATCHED-BLIM <space>191902
1281341 <space>18 <space>KBC-RCVD-ADM <space>191902<space>
and here is my code.
CREATE PROCEDURE msg_ResolveADMBeforeBlim
AS
DECLARE @blimGroupId AS INT
DECLARE @admSenderRef AS VARCHAR(50)
DECLARE admCursor CURSOR FOR
SELECT senderref
FROMtblMsg
WHERE msgstatusid = 18
AND msgtype = 'KBC-RCVD-ADM'
FOR UPDATE
OPEN admCursor
FETCH NEXT FROM admCursor INTO @admSenderRef
WHILE @@FETCH_STATUS = 0
BEGIN
--FIND CORRESPONDING BLIM RECORD AND GRAB ITS GROUPID TO UPDATE THE ADM
SELECT @blimGroupId = GroupID
FROM tblMsg
WHERE msgType = 'KBC-NON-ETC-MATCHED-BLIM'
AND SenderRef = @admSenderRef
PRINT 'AFTER SELECT INSIDE WHILE: Senderref- >' + @admSenderRef;
--UPDATE THE ADM RECORD WITH THE GROUPID AND MSGSTATUS = 3
BEGIN
UPDATE tblMsg
SET MsgStatusId = 3, GroupId = @blimGroupId
WHERE CURRENT OF admCursor
END
PRINT 'AFTER UPDATE INSIDE WHILE';
END
CLOSE admCursor
DEALLOCATEadmCursor
The update statement was included beteween a BEGIN TRAN and END TRAN. But no joy.
Any ideas why this would happen?
Thanks for your help.
Arun
Okay, so I have a problem and I would be REALLY grateful for anyassistance anyone can offer because I have found little or no help onthe web anywhere.I want to access and do joins between tables in two different SQL db'son the same server. Heres what Im dealing with.In one database resides all of my security features for our clients,where it decides who can login, etc etc....In another database, I need to cross reference with a few fields in mysecurity db.See the issue Im running into here is that because the way the peoplehave their databases set up for different products, I would normallyhave to put these tables with security features in every database...which is horrible, because every time I do an update I would have todo it in 12 different places. Thats not efficient at all.So I thought if I had one central DB, where all security features arecontrolled from, that would be perfect... now the issue is crossreferencing and doing joins with other tables that ARENT in the samedb....have I lost you yet?I appreciate all of your help!THANKS!!
View 5 Replies View RelatedHi for all
i just get the news that the Dec. CTP of SQL Server 2005 & tools is released !
but my dream is to see debugging stored procedure support inside the SSMSE as debugging applications inside Visual Studio 2005
Many many many thanks to Microsoft and for the great efforts on the cool products
Mohamed
Hi,
I have to write a stored procedure what repair a table.
It have to delete lost rows before make relation to itself (PK column is 'Kw_KeywordID', FK column is 'Kw_ParentID').
I do not found the way to write this procedure to can create statement from parameter of the procedure.
I would like to pass the table name, but I receive error if the query like 'Select ... Form @Table ....'.
If the parameter is in the 'WHERE', nothing problem.
My procedure is:
CREATE PROCEDURE sp_Repair_IS_KW_AbtKz176
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
declare @OrphanRowCount int
select @OrphanRowCount = 1
while(@OrphanRowCount > 0)
begin
DECLARE KWCursor CURSOR FOR
SELECT count(*) AS cRowCount FROM IS_KW_AbtKz176 WHERE Kw_ParentID IS NOT NULL AND Kw_ParentID NOT IN (SELECT Kw_KeywordID FROM IS_KW_AbtKz176);
OPEN KWCursor;
FETCH NEXT FROM KWCursor INTO @OrphanRowCount
CLOSE KWCursor
DEALLOCATE KWCursor
IF (@@FETCH_STATUS = 0) AND (@OrphanRowCount > 0)
BEGIN
exec('DELETE FROM IS_KW_AbtKz176 WHERE Kw_ParentID IS NOT NULL AND Kw_ParentID NOT IN (SELECT Kw_KeywordID FROM IS_KW_AbtKz176)')
END
end
END
GO
How can I run fully parameterized queries from an SP.
I can make it only like exec('DELETE FROM' + @TableName + ...)
Thank you for any idea,
Imre
Hello,
How can I call stored procedure inside a stored procedure
Thankx
Dear all,i'm facing a problem with my storedprocedure which happened when i ran my web application and reach to the point where my class invoke this storedprocedure,my SP contains a cursor that built his sql according to certain condition, so i put the "SET @cur Cursor For....." inside the if block (definitely i've declared it under AS keyword directly) and this SP is working well inside sql server(I've tested it), BUT when my ASP.net code invoke this SP it gives me the following error : "The Variable @cur does not currently have a cursor allocated to it" repeated as much as there are IF clauses in my SP,Please Help.Regards,
View 1 Replies View RelatedI want to use a stored procedure inside Sql Server from my aspx page so that the data entered in the form goes to the database after submit.
My stored procedure (inside the SQL Server) inserts several fields in a table and it returns two variables.
What code I need to write in order to pass the data from the form to the stored procedure inside the Sql Server? And to store the two returned values?
Thanks
Hi,
I'm new to ASP.NET 2.0. I have a sqldatasource and a formview controls on a web page and inside the formview control I have two textboxes. When I click the UPDATE button in the formview, I'd like to be able to retrieve the values of the textboxes inside the formview control and pass these values to a 'Update' SQL stored procedure defined in the Sqldatasource.
Does anyone know how I can do this? Hope my question is clear.
Thanks in advance.
hakl
Friends,
What are the possible usuages of a SELECT query stmt inside a stored procedure ??
How can we process the results of the SELECT query other than for documentation/Reporting purposes(Correct me if i'm wrong in this) ??
can any one throw some lite on this ..
Thanks,
SqlPgmr
I use the context connection for the "normal" work in the CLR procedure.
View 7 Replies View Relatedproblem convet date
Code Snippet
DECLARE
@y_Date [varchar](4),@M_Date [varchar](2),@d_Date [varchar](2)
DECLARE @mydate [datetime]
set @y_Date='2008'
set @M_Date ='8'
SET @d_Date='05'
set @mydate = CAST(CAST(@M_Date + '-'+ @d_Date + '-' + @Y_Date AS nvarchar) AS DATETIME)
select @mydate
2008-05-08 00:00:00.000
and it look ok
but whan i do this
Code SnippetEXECUTE [dbo].[testpro] @mydate
the date not pass properly !!
Code Snippet
DECLARE
DECLARE @mydate [datetime]
set @mydate = getdate()
2008-05-08 01:20:35.870
like this it work ok
what is the problem with tis line ?
set @mydate = CAST(CAST(@M_Date + '-'+ @d_Date + '-' + @Y_Date AS nvarchar) AS
tnx