MSCS SQL2000 Cluster 64 And 32 Bit Servers
Jul 23, 2005Is it possible to create Fail-over Cluster with 64-bit (Itanium2) and 32-bit (Intel Xeon) nodes?
View 2 Replies
ADVERTISEMENT
Linked Servers On MSCS Fail
Dec 21, 1999Hi I am not having luck creating a linked server on SQL7 running HA on MSCS. We keep getting the "Error 6: Specified SQL server not found"
1. The Linked Server has an advanced entry in the Client Network Utility
2. Setting up the Link to a SQL 7 Server
3. Security is Mapped to a remote user which does exist on the Remote Server.
4. The two machines can ping each other.
5. On the Linking Server the linked Server can be registered as a registered server.
Any Ideas?
Can Linked Servers be set up on M$CS?
-Thanks in advance
-tom
Polyserve Versus MSCS (Microsoft Cluster Server)
Apr 30, 2007Hello All,
I would like to compare the MSCS with Polyserve's solution and thus wondering if anyone has an experience using both or knows -
What are the major differences between the two?
What are the limitations?
What are the advantages and disadvantages?
Which is advisable to use as a HA solution?
Any other information which may help me to make this decision would be appreciated.
Thanks in advance for your help!
~Managar
MSDTC In Active/Active MSCS Cluster
Jun 29, 2004How do I install MSDTC in an active/active MSCS cluster environment?
If I run comclust.exe, I can only activate MSDTC on one of the nodes at a time.
I need DTC on both nodes.
(Opsys is W2K with SQL 2000)
//Mange :)
Suggestion For SQL2000 Cluster
Aug 6, 2006Please answer following questions?
1-Before installing microsoft cluster+SQL Virtual Server I should install normal installation of SQL2000 on both nodes.
2-I have 8x72 GB Ultra320 SCSI in MSA1500 storagebox. What is your recommendation how should I make drives and which RAID system for quroum,DB (db is almost 5 to 10 GB), and T-Log should I use?
3-I have only one database instance, so still I should configure MSDTC or no need?
4- Can I use the same drive and cluster group for Quorum and MSDTC?
5-On windows 2003 when SQL virtual server will finish installation. Then the SQL SP4 I should install on one node or I have to install it one by one on all nodes of the cluster.I am using Active/Passive scenario.
Pls reply my questions.Then I will start my projetct.....
Synchronize The Sysxlogins Between Two SQL2000 Servers
Feb 18, 2002Hi,
I have tried to synchronize master..sysxlogins table from production server to
a testing server. All the databases in the testing server will be loaded from the production server. In order to save drop and recreate the database's users in every database restore, I have tried to find out a quick way to synchronize the sysxlogins table. However, when I load the sysxlogins from the production server onto the tempdb in the testing server, I get the following error :
Server: Msg 213, Level 16, State 5, Line 1
Insert Error: Column name or number of supplied values does not match table definition.
Any comment and suggestion is highly appreciated.
Thanks
The table structures (output of sp_help) of the temporary table and master..sysxlogins are as follows :
1. sp_help testjoe4
Name Owner Type Created_datetime
-------------------------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------------------------------- ------------------------------- ---------------------------
testjoe4 dbo user table 2002-02-19 15:27:31.930
Column_name Type Computed Length Prec Scale Nullable TrimTrailingBlanks FixedLenNullInSource Collation
-------------------------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------------------------------- ----------------------------------- ----------- ----- ----- ----------------------------------- ----------------------------------- ----------------------------------- --------------------------------------------------------------------------------------------------------------------------------
srvid smallint no 2 5 0 yes (n/a) (n/a) NULL
sid varbinary no 85 yes no no NULL
xstatus smallint no 2 5 0 no (n/a) (n/a) NULL
xdate1 datetime no 8 no (n/a) (n/a) NULL
xdate2 datetime no 8 no (n/a) (n/a) NULL
name sysname no 256 yes (n/a) (n/a) SQL_Latin1_General_Pref_CP1_CI_AS
password varbinary no 256 yes no no NULL
dbid smallint no 2 5 0 no (n/a) (n/a) NULL
language sysname no 256 yes (n/a) (n/a) SQL_Latin1_General_Pref_CP1_CI_AS
isrpcinmap smallint no 2 5 0 yes (n/a) (n/a) NULL
ishqoutmap smallint no 2 5 0 yes (n/a) (n/a) NULL
selfoutmap smallint no 2 5 0 yes (n/a) (n/a) NULL
Identity Seed Increment Not For Replication
-------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------- ---------------------------------------- -------------------
No identity column defined. NULL NULL NULL
RowGuidCol
--------------------------------------------------------------------------------------------------------------------------------
No rowguidcol column defined.
Data_located_on_filegroup
--------------------------------------------------------------------------------------------------------------------------------
PRIMARY
The object does not have any indexes.
No constraints have been defined for this object.
No foreign keys reference this table.
No views with schema binding reference this table.
2. sp_help master..sysxlogins
Name Owner Type Created_datetime
-------------------------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------------------------------- ------------------------------- ---------------------------
sysxlogins dbo system table 2000-08-06 01:29:12.500
Column_name Type Computed Length Prec Scale Nullable TrimTrailingBlanks FixedLenNullInSource Collation
-------------------------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------------------------------- ----------------------------------- ----------- ----- ----- ----------------------------------- ----------------------------------- ----------------------------------- --------------------------------------------------------------------------------------------------------------------------------
srvid smallint no 2 5 0 yes (n/a) (n/a) NULL
sid varbinary no 85 yes no no NULL
xstatus smallint no 2 5 0 no (n/a) (n/a) NULL
xdate1 datetime no 8 no (n/a) (n/a) NULL
xdate2 datetime no 8 no (n/a) (n/a) NULL
name sysname no 256 yes (n/a) (n/a) SQL_Latin1_General_Pref_CP1_CI_AS
password varbinary no 256 yes no no NULL
dbid smallint no 2 5 0 no (n/a) (n/a) NULL
language sysname no 256 yes (n/a) (n/a) SQL_Latin1_General_Pref_CP1_CI_AS
isrpcinmap smallint yes 2 5 0 yes (n/a) (n/a) NULL
ishqoutmap smallint yes 2 5 0 yes (n/a) (n/a) NULL
selfoutmap smallint yes 2 5 0 yes (n/a) (n/a) NULL
Identity Seed Increment Not For Replication
-------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------- ---------------------------------------- -------------------
No identity column defined. NULL NULL NULL
RowGuidCol
--------------------------------------------------------------------------------------------------------------------------------
No rowguidcol column defined.
Data_located_on_filegroup
--------------------------------------------------------------------------------------------------------------------------------
PRIMARY
index_name index_description index_keys
-------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ncsysxlogins nonclustered located on PRIMARY srvid, sid
sysxlogins clustered, unique located on PRIMARY srvid, name, sid
No constraints have been defined for this object.
No foreign keys reference this table.
Table is referenced by views
--------------------------------------------------------------------------------------------------------------------------------
Cluster:Win2003_R2_X64_SP1+SQL2000Enterprised_SP4, SQL2000 Can Not Run On NodeB,Why?
Nov 8, 20061、A win2003 Cluster has two node:Node A and NodeB.
2、There are two group on Cluster:
GroupA:ClusterIP,ClusterName,ClusterDisk;
GruopB:SQLServer,DataDisk;
3、The problem is :
GruopA can switch between Node A and NodeB freely;but GruopB can not switch to NodeB,Why?
(1) NodeB's Application event log:
Event ID 17052:[sqsrvres] ODBC sqldriverconnect failed
Event ID 17052:[sqsrvres] checkODBCConnectError:sqlstate=IM002;native error=0;message=[Microsoft][ODBC driver manager]datasource not found and no default driver.
Thanks for your help!
Using Cluster Servers And Preallocated Space
Mar 30, 2007Hi All,
I am doing some design work on a new system. The plan is to use clustered servers accessing the same backend instance. I want to prepoulate the table with our unique id (for say 5M rows for sake of discussion). Where I am puzzled is how do I guarantee unique ids to the application when both servers are looking for the same next available row? The sql could be something like
select min(id) from table where user_id is null
The trouble our current system runs into is that there are occasions where the users generate the same id which of course messes up the application.
Is this a case where a store procedure would do the insert and return the id to the user is a better solution?
Thanks
Want To Load Balance And Cluster 3 SQL 2005 Servers
Oct 9, 2007Currently we have a single SQL server. It went down and the higher ups were none to happy. Lots of money lost, down time, unhappy customers....the whole nine yards. They want to throw all sorts of money at the problem and want a solution that is high availability and provides load balancing. I think I came up with a solution.
3x Windows 2003 Enterprise Edition servers running SQL 2005 Standard in a cluster all connected to a SAN.
I'm guessing I need to set up Network Load Balancing in order to load balance the SQL database. What we would love to have happen is if one of the servers goes down, everything else just picks up. That coupled with our database that is increasing in size and transactions gets load balanced.
Am I going down the right path? Something else I should look at? Or that I am missing?
Thanks!
Want To Load Balance And Cluster 3 SQL 2005 Servers
Oct 9, 2007Currently we have a single SQL server. It went down and the higher ups were none to happy. Lots of money lost, down time, unhappy customers....the whole nine yards. They want to throw all sorts of money at the problem and want a solution that is high availability and provides load balancing. I think I came up with a solution.
3x Windows 2003 Enterprise Edition servers running SQL 2005 Standard in a cluster all connected to a SAN.
I'm guessing I need to set up Network Load Balancing in order to load balance the SQL database. What we would love to have happen is if one of the servers goes down, everything else just picks up. That coupled with our database that is increasing in size and transactions gets load balanced.
Am I going down the right path? Something else I should look at? Or that I am missing?
Thanks and sorry for posting this in multiple places!
Upgrading Mulitple 7.0 Servers To 2000 Cluster Server
Jun 6, 2002We shall be taking a bunch of 7.0 instances and moving/upgrading to a SQL 2000 cluster server. I was thinking of creating new named instances on the 2000 cluster and upgrading each 7.0 server to it's respective named instance. Also thought of using the 2000 copy database wizard; I was told this didn't always work. Anyone hear of problems with this?
Thanks
SQL Server 2005 64bit SP2 Installation Issue On Cluster Servers.
Nov 23, 2007Hi All,
We have been experiencing issues with SQL Server 2005 SP2 upgrade on cluster servers.
After running the setup, it gives failure message for Database services.
Installing SP2 on 64bit cluster server we get error regarding "passive node not patched properly or run the setup from passive node". However, select serverproperty(€˜productlevel€™) returns the output as "SP2". On more digging we found from SQL Server Error log, that the resourcedb of that server is of level 9.0.0.3199
€œThe resource database build version is 9.00.1399. This is an informational message only. No user action is required.€?
However if we do the SQL Server 2005 SP2 upgrade on standalone machines with the same software repository, it upgrades successfully and also resourcedb upgraded to 3042 version. So if we look at the errorlog of a standalone machine it gives following message.
"The resource database build version is 9.00.3042. This is an informational message only. No user action is required."
I again reiterate that, this is the issue we have faced on 64bit SQL Server 2005 SP2 upgrade only on cluster SQL Servers, however on standalone machine it works fine and 32bit SP2 installation works fine.
Please let us know the solution for this.
regards
Jay Mehta
SQL 2012 :: Does Secondary Replicas In AlwaysOn Have To Reside In Windows Cluster Servers
Sep 18, 2014I know now that AlwaysOn feature HAS to be installed/configured on a Windows Clustering environment, BUT the secondary replicas, like the Disaster recovery replica residing in a different Data Center HAS to be also in a Windows Clustering environment or can it reside on a SINGLE SQL Server INSTANCE?.
View 6 Replies View RelatedStep By Step SQL2000 Failover Cluster Upgrade To SQL2005
Oct 13, 2006is there such a paper? if so, can you pls point me to it? thx in advance
View 4 Replies View RelatedSP2 On MSCS
Jun 20, 2000Well, today's the day. I finally got approved to upgrade our 24x7 cluster to SQL Service Pack 2. I'm so looking forward to running Profiler without causing the server to failover, not to mention ArcserveIt and Spotlight an...
Anyway, Any feedback about the upgrade process is greatly appreciated. I've installed SP2 elsewhere without a hitch but I realize that I have to uncluster my production servers first and that there is no easy way back from SP2. I have full backups scheduled to run prior to the upgrade, any other ways to protect myself? Thanks in advance!!
Pete Karhatsu
SQL 7.0 On MSCS
Dec 21, 1999Have any one installed SQL Server 7.0 on MSCS in Active/Passive Mode? I need some guidance/Information relating to how to install.
Thanks in advance
Reddy
Help: MSCS Admin
Apr 28, 2001I am new to MS Cluster server. Could anyone tell me the correct procedure to shutdown and restart MS SQL Server 2000 in a Clustered environment? Thanks
View 1 Replies View RelatedDr Watson On Vsrvsvc.exe For MSCS
Aug 11, 2000Anyone experience Dr Watson's on MS Cluster Server? This is the second time that it's happened and I can't explian it.
The first time it happened it appeared to stop the virtual server service on my prod server, Cluster admin showed it as running.
This time it bounced the engine but nothing stopped.
Any clue is much appreciated, because I don't have one
I'm at SP5 on NT4 and SP2 on SQL 7 EE.
Pete
Failover Options- Any Besides MSCS?
Jul 16, 1999I need to know if there are any other failover options available for SQL Server/NT, beyond Microsoft Clustered Services. If there are any, which ones are advised?
Thanks,
Jon
jon_waldow@emeraldsolutions.com
Sql2000 && Sql2005, Want Localhost To Use Sql2000
Sep 17, 2006i have sql2000 & sql2005 on the same machine. I am unable to register my localhost in sql2000, get an access denied error. How can I make my localhost use sql2000 database?
View 1 Replies View RelatedSetup And Upgrade :: Cluster Installation Failed On Adding Node To Cluster
Oct 10, 2015During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We  run the below commands but didn’t get any resolution & got the same above error .
Â
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).Â
2. net stop winmgmtÂ
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).Â
4. net start winmgmt
2<sup>nd</sup>Â Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â net stop winmgmt
2. Run the following commands.
a). Command: Winmgmt /salvagerepository %windir%System32wbem
b). Command: Â Winmgmt /resetrepository %windir%System32wbem
3. Re-enable the WMI service
Command:Â Â Â Â Â Â Â Â Â sc config winmgmt start= autoÂ
Last command to run after above steps
4. Command:Â Â Â Â mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"
File not found Error for above command.
Access Denied To Cluster Storage When Restoring 2005 Full Text DB To 2014 Cluster
Jun 10, 2015I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2
Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid.
Msg 3156, Level 16, State 50, Line 2
File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file.
Msg 3119, Level 16, State 1, Line 2
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
Msg 3013, Level 16, State 1, Line 2
RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
SQL 2012 :: Advanced Cluster Preparation For New Instance On Existing Cluster
Apr 10, 2014I ran the Advanced cluster preparation for a new sql instance on an existing cluster.
Slq Server 2012.
After is completed, it was successful, I realized I specified the wrong Instance Root directory.
Is it possible to remove what the preparation installed? Or is it possible to change the root directory?
Setup And Upgrade :: Can Build Cluster By Adding Cluster Service
Jul 6, 2015Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.
View 4 Replies View RelatedSql Report Works Fine On Internal Servers - Hosed On External Servers - Need Some Help
Nov 21, 2007I have a report that was designed using SQL Reporting Services that sits on a SQL reporting server. It's nothing too exciting, it is essentially a three page application with legal jumbo on pages 2 and 3 and applicant data in fields on page 1.
We use rectangles to force page breaks to page 2 and to page 3.
When running the report on the report server, it shows and prints fine.
When running the report from the QA website internally, it shows and prints just fine.
When running the report from the production website from a machine internally, it shows and prints just fine.
When running the report from outside of the company network, the report is jacked. It obliterates large chunks of text, crams text together, and creates blank pages.
I need help in determining where I even begin with trouble shooting this!
SQL 2012 :: Server Cluster Without Windows Failover Cluster
Feb 18, 2014I´ve been reading that SQL Server 2012 Always On is dependent on having a Windows Failover Cluster setup. Is that correct ?
View 6 Replies View RelatedT-SQL (SS2K8) :: Convert Non-cluster Primary Key To Cluster Unique
Nov 6, 2014I have following script which i am planning to run to drop all non-clustered primary keys on a database and then created as clustered. I am using someone else's script so don't know how to modify this. Some of primary key columns are used in references in other tables.
is there anyway i can drop the existing primary keys and using their original script then create again as clustered including restoring all foreign and reference keys and unique or no unique.
DECLARE @table NVARCHAR(512), @tablename NVARCHAR(512),
@sql NVARCHAR(MAX), @sql2 NVARCHAR(MAX), @sql3 NVARCHAR(MAX),
@column NVARCHAR(MAX);
DECLARE @indexname NVARCHAR(512);
SELECT name As 'Table'
[Code] ....
Recovery :: Can Join A Node In Windows Cluster Which Is Already In Different Cluster
Oct 8, 2015can we join a node in a windows cluster which is already in a different cluster?
We have this requirement as we need to setup readable secondary ( always on AG) on the third node.
Recovery :: IP Change For Cluster / Nodes And Windows Cluster?
Jul 15, 2015We are planning to change all IPs of PRODUCTION Failover Cluster Setup. In my cluster setup ... we have 2 Physical Nodes with windows-2008, Roles are MSDTC and SQL-2008R2.
IP change for:
1. Both Nodes(Physical)
2. MSDTC
3. SQL ServerÂ
4. windows ClusterÂ
So Almost... All IPs are going to change.
Im DBA here, I need to take care of SQL cluster and MSDTC. But I haven't performed this activity before.So I'm worrying about Impacts and consequences of this change. steps how should I perform this activity.
Development Servers, Auto-update Live Servers
Aug 21, 2001can anyone tell me if they know of a way to automate the update process from development servers to live server, with little interference from an administrator
I have a development team that are constantly updating their databases along with their ASP code, and want to publish changes an a weekly basis. They have asked me for a way to take their new structures, tables, procedures etc, and copy them to the live servers, but NOT to interfere with existing customer data.
Funny I know – and I hate the idea btw :(
Any references, contacts, 3rd party tool recommendations welcome,
Thanx,
Darren
Linking SQL 2005 Servers To SQL 2000 Servers Problems
Sep 27, 2007I am in the middle of a major migraton project, moving from x86 SQL 2000 to IA64 SQL 2005. I have a business need to link to several legacy servers. I have a number of problems I am trying to solve.
1) Linking a Kerberos server to a non-Kerberos server.
2) Linking x64 or IA64 servers to x86 servers.
3) Linking SQL 2005 to SQL 2000.
Two of the errors I am encountering are:
------------------------------
TCP Provider: An existing connection was forcibly closed by the remote host.
Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
OLE DB provider "SQLNCLI" for linked server "SCDC250DB" returned message "Communication link failure".
(Microsoft SQL Server, Error: 10054)
------------------------------
And
------------------------------
The OLE DB provider "SQLNCLI" for the linked server "SCDC250DB" reported an error. Authentication failed.
Cannot initialize the data source object of OLE DB provider "SQLNCLI" for linked server "SCDC250DB".
OLE DB provider "SQLCLI" for linked server "SCDC250DB" returned message "Invalid authorization specification".
(Microsoft SQL Server, Error: 7399)
If someone has worked through these problems before, I would appreciate it if you could direct me to the relevant documentation to resolve these issues.
Thanks!
Brandon Forest
Database Administrator
Data & Web Services Team
Sutter Connect Information Technologyforesb@sutterhealth.org
Script To Change Cluster Index To Non Cluster
May 20, 2003Hi all,
We have many tables which have cluster index on column with datatype 'Char(200)'.
Does anyone have script to change cluster index to noncluster for all user tables which have clustered index on a column with 'char(200)' datatype.
Thanks,
Deepak
Transact SQL :: Difference Between Cluster And Non-cluster Index
Jul 26, 2015Wanted to know about difference between cluster and non cluster index with example.
When to use cluster index and non cluster index .