I have mssql 2005 installed and i see that MSDB database is marked as suspect. I almost tried all the steps which are submitted in the forums.
1) I shut down the server, navigating to the directory 'd:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn' and doing the following: start sqlservr.exe -c -T3608
2) renamed the damaged msdb files (msdbdata.mdf and msdblog.ldf in the 'd:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData' directory)
3) Run the instmsdb.sql script in the 'd:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLInstall' directory
--x---
When I executed third step it returned me below error:
Msg 926, Level 14, State 1, Line 63
Database 'msdb' cannot be opened. It has been marked SUSPECT by recovery. See the SQL Server errorlog for more information.
Mu MSDB database is in suspect mode. Anyone have any info to help get it out. It tells me that it cannot find the path specified for the backups, yet the path exists and there is more than enough disk space even though it says that there is not? I am confused. First time getting this error and doesn't make sense why.
Dear Experts, I'm using sql server 2005, and now i'm trying to restore with one backup. then i'm getting error saying that MSDB database in suspect mode.
how to make the DB to the normal mode.... please help me in this regard
Vinod Even you learn 1%, Learn it with 100% confidence.
I'm running Win2000/SQL2000 on a Compaq CL380 Cluster Server. After a powerdown to do a physical move, the MSDB is now marked SUSPECT. I have tried the stored procedure SP_RESETSTATUS, a DBCC consistency check, and also have restored the database from backup. The database still shows MSDB is suspect. What can I do? We can't get a good backup as long as it is still this way as it depends on the SQL Agent.
Hi all, I have a big problem with a Database on SQL-Server7.0 running on windows 2000 advanced server. The msdb database is marked suspect. I have tried a few suggestions in the SQL BOL but no luck.
We have a new installation on Friday which was running fine. Unfortunately today, the msdb is marked suspect. Do I uninstall and reload SQL server or change the status. We only have a training data on the server presently. Does anybody has any other suggestions? Please help. Thanks for your assistance.
Dear Experts, in one of our servers, the MSDB database is in suspect mode, and i've used the command sp_resetstatus and i restarted the service also but still it is in suspect mode.
how can i change that to normal state? it is asking to check the errorlog.
Vinod Even you learn 1%, Learn it with 100% confidence.
My msdb database is marked as suspect. This means that my maintenance plandoesn't work. I'm a novice when it comes to sql server so now I'm wonderingif anyone could give a hint on how to fix the suspect msdb database? Doesthis database contain any vital information? What could be the reason thatthis database become suspect?Appreciate any suggestions in this matter.Thanks!--mvhHallgeir
A client improperly shutdown a PC running MSDE and it corrupted the MSDB database which contained several DTS packages. I have tried fixing the problem on my own but have exhausted all the simple options like restarting SQL Server.
I googled the problem and found the following SQL script:
USE MasterGO-- Determine the original database statusSELECT [Name], DBID, StatusFROM master.dbo.sysdatabasesGO-- Enable system changessp_configure 'allow updates',1GORECONFIGURE WITH OVERRIDEGO-- Update the database statusUPDATE master.dbo.sysdatabasesSET Status = 24WHERE [Name] = 'msdb'GO-- Disable system changessp_configure 'allow updates',0GORECONFIGURE WITH OVERRIDEGO-- Determine the final database statusSELECT [Name], DBID, StatusFROM master.dbo.sysdatabasesGO I ran it and and it generated the log file below. I restarted MS SQL but the database was still marked as suspect (as I would expect from the log file).
Any help in interpreting and recovering from this problem would be greatly appreciated.
The problem is, that this user database only has one data file and file_id 2 is the log file.I understand that the event_type shows checksum and torn page error but in the log file? DBCC CHECKDB shows no errors and the database is part of an AOAG in synchronized state.We have log backups in every 15 minutes.
2001-09-12 21:21:01.11 kernel udopen: Operating system error 32(The process cannot access the file because it is being used by another process.) during the creation/opening of physical device C:MSSQL7dataReporting.mdf.
2001-09-12 21:21:01.11 kernel FCB::Open failed: Could not open device C:MSSQL7dataReporting.mdf for virtual device number (VDN) 1.
What other things would cause the Reporting.mdf to be locked so the SQL server could not open it?
I have a database in suspect mode. There is no backup of this database. I've followed the troubleshooting and it isn't working out. There are 3 steps: 1. execute sp_resetstatus 2. use alter database to add data file or log file to the database 3. stop and restart SQL Server 4. free disk space and rerun recovery I've tried to make it, but the step # 2 haven't worked. Then I tried step 3, however the database is still in suspect mode. What should I do? Is there something I am missing? Thanks, Fábio
my database went into suspect mode. i tried to reset the status database by "sp_resetstatus abc". It is giving the message
"Prior to updating sysdatabases entry for database 'cr2db', mode = 0 and status = 260 (status suspect_bit = 256). For row in sysdatabases for database 'cr2db', the status bit 256 was forced off and mode was forced to 0. Warning: You must recover this database prior to access."
please let me if you have any solution to this problem.
Hi, When i tried to restore database from the Network m/c ...upto 60% of the restoration process went well,But after that i got message saying that " Communication link failure " then database went in to LOAD/SUSPECT mode, This happend in Active/Active Cluster environment and at the same point of time Fail over occured and resources moved to other node.
i tried by running SP_RESETSTATUS stored procedure to change the status of the Database ,But no use... Then i deleted the Database and recreated and restored.. because it was a test server...BUT if it happens in Production what to do?????..... Is there anyway to over come such situations...
Using 'dbghelp.dll' version '4.0.5' *Dump thread - spid = 51, PSS = 0x19b591e0, EC = 0x19b59510 * * User initiated stack dump. This is not a server exception dump.
Error: 3314, Severity: 21, State: 3
Error while undoing logged operation in database 'SBM01'. Error at log record ID (222:9976:477)..
Error: 9004, Severity: 23, State: 2
An error occurred while processing the log for database 'SBM01'..
Error: 3414, Severity: 21, State: 1
Database 'SBM01' (database ID 7) could not recover. Contact Technical Support..
In SQL 2005 when a database is in suspect mode there is no obvious way to tell (via SSMS). In SQL 2000 the word "suspect" was displayed (via Enterprise Manager) next to the database, and the respective database icon was grayed out. Why was this behavior changed for SQL 2005? From a disaster recovery standpoint, it is very important to see immediately if a database is in suspect mode.
In the work I came up against a situation when the working database at the end of day went to the Suspect Mode.And the archive was in many hours before. To transfer it in normal mode, until isn't made repaired base it was impossible. DBCC checkdb also refused to run because the database is in this mode.
Rajiv Parekh writes "Since last few weeks on Startup of System few Databases moves to SUSPECT MODE. This probelm is not daily but atleast 0nce in week.The day is is not fixed. Have Unistalled SQL & again Reinstalled, but the problem continues. Please inform my Why this problem & what is the Solution."
one of my sql database went in suspect mode can any one advice why it has happened is it the problem with sql server . This has happend for the second time in 4 months .
As I know the database should be restored from backup and logs reapplied. That’s the first and generally recommended approach any time a DB is suspect, whether it’s from log or data file corruption.But if I have no backups then we follow below steps ( after Googling I found these steps on most of the websites ):
1.EXEC sp_resetstatus ‘yourDBname’; 2.ALTER DATABASE yourDBname SET EMERGENCY 3.DBCC checkdb(’yourDBname’) 4.ALTER DATABASE yourDBname SET SINGLE_USER WITH ROLLBACK IMMEDIATE 5.DBCC CheckDB (’yourDBname’, REPAIR_ALLOW_DATA_LOSS) 6.ALTER DATABASE yourDBname SET MULTI_USER
Now my question is, 1. If after executing DBCC CHECKDB at 3rd step, it shows inconsistency.Then I will execute SET SINGLE USER WITH ROLLBACK & if after executing DBCC CHECKDB at 3rd step, no errors found. Then what will be the steps?
2. When we execute DBCC CHECKDB (' DBNAME ', REPAIR_ALLOW_DATA_LOSS) how can we recover lost data during process.As far as I know some data will loss and if it will happen then business will get suffered.
3. Why run DBCC CHECKDB() WITH REPAIR_ALLOW_DATA_LOSS if there are no consistency errors in the database?
I was trying to restore a "mdf" (MSDE) database for a HP OpenView product, unfortunately at the initial state of restoration, i got the following error messages:
Database 'openview' cannot be opened. It has been marked SUSPECT by recovery. See the SQL Server errorlog for more information.
Any valuable suggestions on how to set/change the current "SUSPECT" mode so that the 'openview' database can be opened?
Hi I want to suspect database stop server first I try to rename C:Program Files (x86)Microsoft SQL ServerMSSQL.1MSSQLDatamsdbdata.mdf to msdbdata.sav and then start the server use command to check: SELECT status & 256 FROM master.dbo.sysdatabases WHERE name = database_name if the result is 256,it means the msdb is suspect,but the result is 0,it same as the normal status do you know how to set database suspect with this way, or do you know other way to suspect databse. absolutely,I could re-back my server noraml with your way Thanks
One of my database (name XYZ) shows suspect status in EM but when i try to dig further by running below query i get only "OK" ( see query)
SELECT [name],status, case status when (status & 32) then 'Loading' when (status & 32) then 'Loading' when (status & 64) then 'Pre Recovery' when (status & 128) then 'Recovering' when (status & 256) then 'Not recoverd' when (status & 512) then ' Offline' when (status & 1024) then ' Single user' when (status & 1024) then ' Read only' when (status & 32768) then ' Emergency Mode' else 'OK' end as status FROM master.dbo.sysdatabases WHERE [name] NOT IN ('distribution', 'tempdb', 'model','Pubs','Northwind')
also i run this
select * from sysdatabases where databaseproperty(name,N'IsSuspect') <> 1
and here also i get all the database including "XYZ"...i guess if "XYZ" is suspect the resultset should not be including "XYZ"
Why if the EM shows suspect status FOR "XYZ" DATABASE it should come up when i check status column in sysdatabases table?
Durning install I selected Window's Authentication only, but now it seems we may need to use a Mixed Mode with an SA account etc... is there anyway to switch SQL 2005 to use Mixed Mode after the fact?
We have reports in SharePoint integrated mode which are really slow when compared to native mode. I have been asked to research and give info on what exactly causes the delays.
Any articles which give me information as to what happens when a report is run from SharePoint server and where does it log.
There is a query which when executed in the grid mode(ctrl+d) takes approx 0.02 seconds(about 21,000 rows) But when I execute in the text mode, it takes about 0.40 seconds!! Why is this difference? Also, when the records from this table are read from a VB application, they are equally slow (as in the text mode!) Why is it so slow on the text mode & relatively faster in the grid mode? Has anyone got any idea on ‘Firehose’ style cursor ?(which may speed up access of data in the VB application)
Recently I read such statments 'When SQL Server is run in "lightweight pooling" mode (fiber mode) and the DTC service is started, unexpected behavior may occur.' Can someone say anything about fibe mode?I am appreciated for it.:)
Currently, our Report Builder is running on Local Intranet mode. I'm investigating what the security implications are in changing it to Internet mode. However, I've not been able to find any documentation on this.
Does anyone know of any documentation that addresses this issue or have experience that they can share with changing Report Builder security zone from Intranet mode to Internet mode?
