MSDE Remote Connect Strange Problem
Jan 25, 2006
I'm trying to connect to the SharePoint MSDE database from Windows XP
SP2 machine over Ethernet LAN. I was getting server not found or access
denied, until I enabled TCP/IP via svrnetcn.exe. Now, I'm getting
OK
Connection failed:
SQLState: '01000'
SQL Server Error: 10061
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]ConnectionOpen
(Connect()).
Connection failed:
SQLState: '08001'
SQL Server Error: 17
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SQL Server does not
exist or access denied.
I just did an netstat -an and I don't see the server listening on 1433.
What am I not doing?
The svrnetcn tool has no effect. I make a change and check the logs,
but nothing happens. What would be causing this?
View 4 Replies
ADVERTISEMENT
Apr 22, 2007
I recently switched servers and I'm running into the a really strange remote connection issue.
The server is brand new Windows 2003 fully updated , .NET 2.0 and 3.0 installed, trying remote connection using VS2005 and the full edition of Management Studio. Managment Studio Express is installed on box.
Firewall is not blocking UDP port 1434 or TCP port 1433 or any other normal port, verified with Netstats
First I tried to install SQLExpress Advanced Services as a default instance. The install worked fine with no issues. I enabled remote connections in the surface area config tool and then restarted the service. When I attempted to connect using xx.xx.xx.xxx or xx.xx.xx.xxy on the local machine using TCP or NP with SQL authentication it worked fine. Then I tried to connect from my remote machine and I recieved one of these errors:
Using TCP
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL server does not allow remote connections. (provider: TCP Provider, error:0- A Connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)
Using NP
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL server does not allow remote connections. (provider: Named Pipes Provider, error:40- Could not open a connection to SQL Server)
Next I contacted my hosting company they recommended that I reinstall which I did this time as a Named Instance did the remote configuration, started the sql browser and got the connections working on the local machine using
.SQLEXPRESS
or xx.xx.xx.xxxSQLEXPRESS or xx.xx.xx.xxySQLEXPRESS
Tried again from my remote machine get the
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL server does not allow remote connections.Error 26 (can't find a server at this address error)
Any suggestions??
View 4 Replies
View Related
Feb 16, 2007
Vendor app (written in VB '05) connects fine building screens that list data from only one record but blows up building 'list' screens that list multiple records. Really strange-it works fine when run locally on the server (Win2K3) and when run from one developer's machine (which has VS 2005 but not SQLExpress) but not from other developer's machines (which have both VS 2005 & SQLExpress) nor from a 'user' machine (which has neither). All have .Net Frameworks 2.0, the developer machines have SQL Management Studio & connect fine via that.
Vendor, of course, says it's a configuration issue so not their problem. I'm trying to figure out what they could be doing differently when building a list screen & therefore why it would fail. Fact that it works locally suggests that the failure is in the remote connection-but fact that it connects on 'single record' screens says that remote connections work. So what would be different about a request to return multiple records and why would it work locally but not remotely?
BTW, Surface Area Configuration Manager won't run-it reports 'localhost does not exist on the network or it cannot be configured remotely'. This is when running the Configuration tool directly on the server.
Any ideas?
View 2 Replies
View Related
Feb 28, 2008
Well this has got most of us stracthing our head as not matter what we do we can't connect remotely
But it get's a bit more complex. We have an existing web application running with a local instance of express running fine. However as the server is getting hammered we need to put the new version of the site on a second server. Unfortunately the key contact who use to work on the old system and set it up is no longer avialable. We've been through all the basics and nothing works... our latest attempt was to install a new instance of 2005 as we were not sure what was going on.
So, here is the log for this new clean instance:
Code Snippet
2008-02-28 15:12:13.75 spid5s Server name is 'S15271584SQLEXPRESS'. This is an informational message only. No user action is required.
2008-02-28 15:12:13.75 spid5s Starting up database 'msdb'.
2008-02-28 15:12:14.00 spid8s Clearing tempdb database.
2008-02-28 15:12:14.26 Server A self-generated certificate was successfully loaded for encryption.
2008-02-28 15:12:14.29 Server Server is listening on [ 'any' <ipv4> 4286].
2008-02-28 15:12:14.29 Server Server local connection provider is ready to accept connection on [ \.pipeSQLLocalSQLEXPRESS ].
2008-02-28 15:12:14.29 Server Server named pipe provider is ready to accept connection on [ \.pipeMSSQL$SQLEXPRESSsqlquery ].
The Browser is up and running and we try to connect via SQL Management Studio with the following details:
SERVERNAMESQLExpress
SQL Server Authentication
But get:
Code Snippet
TITLE: Connect to Server
------------------------------
Cannot connect to SERVERNAMESQLEXPRESS.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
How do I know this is not a connectivity/firewall issue? Simple:
1. We stop the SQLExpress instance
2. Setup netcat to listen on that port (nc -l -p 4286)
3. Connect via telnet (telnet SERVERNAME 4286) and type something which then appears printed out on the other end.
Anyway, the Windows Firewall is off and I can't see any other firewalls installed (we did not setup this server).
Btw, if we try and connect to the existing instance we get:
Code Snippet
TITLE: Connect to Server
------------------------------
Cannot connect to www.a-t-s.net.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10060&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Here is the error log for that instance:
Code Snippet
2008-02-15 06:43:16.92 spid4s Server name is 'SERVERNAMES15271584'. This is an informational message only. No user action is required.
2008-02-15 06:43:16.92 spid4s Starting up database 'msdb'.
2008-02-15 06:43:17.14 spid8s Clearing tempdb database.
2008-02-15 06:43:17.19 Server A self-generated certificate was successfully loaded for encryption.
2008-02-15 06:43:17.20 Server Server is listening on [ 'any' <ipv4> 1177].
2008-02-15 06:43:17.20 Server Server is listening on [ 'any' <ipv4> 1433].
2008-02-15 06:43:17.31 Server Server local connection provider is ready to accept connection on [ \.pipeSQLLocalS15271584 ].
2008-02-15 06:43:17.31 Server Server named pipe provider is ready to accept connection on [ \.pipeMSSQL$S15271584sqlquery ].
2008-02-15 06:43:17.31 Server Dedicated administrator connection support was not started because it is not available on this edition of SQL Server. This is an informational message only. No user action is required.
2008-02-15 06:43:17.33 Server The SQL Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b. Failure to register an SPN may cause integrated authentication to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies.
2008-02-15 06:43:17.33 Server SQL Server is now ready for client connections. This is an informational message; no user action is required.
We've also run a network sniff with wireshark and get see the request hitting SQL on the right port... but there is never a response back.
Any ideas? I'm open to anything short of slitting my wrists!!
Many thanks in advanced.
View 5 Replies
View Related
Sep 24, 2007
Hello,I try to get an asp site to work on my local machine. Using ASP Studio2005 and mssql server 2005 eval on win xp, and ms management studio.I'm new to mssql and asp and just want to get the site to run (notedit). have a simple connect script likeset conn = server.CreateObject("adodb.connection")conString ="PROVIDER=SQLOLEDB;DATA SOURCE=DANIEL;DATABASE=nano;UserID=sa;Password=yyy"conn.open conStringwhat happens is that IE hangs on load. the settings in the string areall ok I think: if I change id or pw (that is to any non-existinguser), immediately comes error like "problem logging in user sa". onlywith the correct values, IE hangs. this makes me believe that thesettings are right, but that the hanging comes from anything else. anyideas anyone? port problem? which is right? how to check? what else?how to detect? where are error logs? how to get detailed info?i would also be lucky with no-authentication - butconString ="PROVIDER=SQLOLEDB;DATASOURCE=DANIEL;DATABASE=nano;Integrated Security=SSPI"without uid and pw also results in hanging. so I now think the connstrings is ok. what is wrong?? [since I am new, and just took theproject from a cd, please also ask me "stupid"questions/suggestions!!] thank you VERY much!!!!daniel
View 1 Replies
View Related
Oct 29, 2005
Hey u guys.I have a strange problem and non of myfriends can solve it.The story is like this:I want to connect to my database at my hosting from SQL Query Analyser.With the same SQL server, username and password.But there is only me who can not connect by that way.This is the error of that problem, i made a screenshot for it.Please click here: http://www.xhnguyen.info/sql.JPGAnyone had this problem before ?Could anyone please help me solve it?Thank you very much.Joesy
View 1 Replies
View Related
Jan 30, 2007
Full Error message is:
Failed to connect to server DDI-DP9IM5A5F5W. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
When I consult the error log I see:
Could not connect because the maximum number of '4' user connections has already been reached. The system administrator can use sp_configure to increase the maximum value. The connection has been closed. [CLIENT: <local machine>]
2007-01-30 04:53:14.93 Logon Error: 17809, Severity: 20, State: 3.
_____________________________________________________________
The log error message doesn't make any sense because there aren't 4 user connections.
After I received the error message, mgmt studio still lets me access the database make changes, but I cannot connect via my application. Any ideas? Thanks!
View 8 Replies
View Related
Nov 24, 2003
I installed MSDE at my server at home, and that works fine.
On the server I can access my MSDE perfectly.
But, from a remote computer it seems impossible to connect.
Some (maybe) important information:
To create a user at my msde I used:
sp_addlogin (@ the MASTER DB)
sp_adduser (@ My DB)
sp_addrolemember (@ My DB)
Then I runned SVRNETCN.exe and enabled TCP/IP.
btw: I don't have a firewall running and both computers are on the same local network.
View 8 Replies
View Related
Apr 12, 2004
3 of 100 MSDE servers' sql agent stop working with 'sqlAgent servise has marked as deleted'.
1. is there a way to fix this service could not start issue?
2. probably not. before moving all DBs to a new MSDE server, I run scripts on daily via isql to these 3 MSDE to run the daily backup and dbcc jobs. The problem is I could forget to run.
I tried to run following:
backup database remote1.db1 to Backup_db1 with init
so that I could run a job from my server on scheduling time. but it did not work.
Any idea to turn manual process to semi-weapon?
thanks
-D
View 1 Replies
View Related
Jun 26, 2004
For a SQL Server 2000 connection string I usualy use the following format:
server=somewhere.com;uid=sa;password=sa;database=myDB
or:
server=66.33.11.123;uid=sa;password=sa;database=myDB
However, now I am dealing with a remote MSDE database. What is the format to connect to a remote MSDE database? Is it:
server=<IPADDRESS><INSTANCENAME>;uid=sa;password=sa;database=myDB
Where <IPADDRESS> is the Ip address of the remote machine and <INSTANCENAME> is the MSDE instance name. Is this correct? If not, what am I doing wrong?
View 4 Replies
View Related
Oct 24, 2006
Hi all,
I have 2 pcs connected each other and one has the MSDE installed, i would like to access PC1 MSDE instance remotly is this possible or MSDE couldn't be used in network environment and just locally?
TIA
Tiago Teixeira
View 6 Replies
View Related
May 1, 2007
Hi all,
I installed a MSDE on a Windows XP SP2 and configured it for accepting remote connections. But It shows the "SQL Server doesnot exist or connection denied" message whenever I try to connect to this server. For more information I am adding more facts
* It is an MSDE and not a WMSDE
* Firewall is turned off
* Server process is listening on 0.0.0.0:1433
* TCP/IP and Named Pipes are enabled using server network utility
* LoginMode=2 is set for mixed mode authentication in the registry
* Tried restaring the Process and even windows after the changes.
Please help me !!
Thanks in advance
View 1 Replies
View Related
Oct 12, 2005
I have a server with SQL Server installed first, and MSDE installed later. Both are set to Mixed mode. The operating system of the server is Windows XP Sp2.
View 9 Replies
View Related
Dec 5, 2004
My question is, is it possible to connect to an SQL database using the MSDE 2000 SP3a edition over the internet? And if so, how do I set it up? Thank you in advance.
View 1 Replies
View Related
Dec 29, 2003
Hi
I just installed MSDE over my Windows 2003 box and facing an small problem.
I installed it with SQL security mode and also set a password for user "sa".
Everything looks just fine using "osql" as it uses local address.
But I can't connect to my server from another computer using VS.NET Server Explorer.
It seems as MSDE is set to reject connections from outside by default.
My question is how to enable it so I can connect using my "sa" account.
Appreciate your help in advance.
View 3 Replies
View Related
Dec 30, 2003
Hi,
I only have Framework installed on my machine, and I also installed MSDE 2000 Rel. A, using the following command:
C:MSDERelAsetup.exe SAPWD="myPass" INSTANCENAME="myXP"
I can see that the service for this app is running. Though, I could not connect to it using oSql command like the following:
osql -S(local)myXP -E
or
osql -S(local)myXP -Usa, and supply the password "myPass".
The message was:
[DBMSLPCN]SQL Server does not exist or access denied.
[DBMSLPCN]ConnectionOpen (Connect()).
Any response would be appreciated.
Subi_I
View 2 Replies
View Related
Dec 23, 2004
Hello everybody and happy holidays to all.
I'm new to C#, and I appologize for this basic question.
I am trying to connect to an SQL database from a very short C# program, which I found on the Microsoft site, demonstrating this subject.
Here is my setup:
Windows 2000 Professional
dotNET Framework 1.1 with sp1 installed
MSDE 2000
Note: I do not own nor do I have Visual Studio.NET of any kind installed.
Now, here is what works:
osql -E -S localhostvsdotnet
1>
And I can create and populate a database, which I called mydb.
Now, in my simple C# demo program I have this line
SqlConnection mycon = new SqlConnection("server=localhost;database=mydb;trusted_connection=true");
And the program compiles OK using "csc" command. But when I run it, I get this message:
Couldn't Open Connection to server=localhost;database=mydb;trusted_connection=true
Could anybody comment on what am I missing?
Thanks.
View 1 Replies
View Related
Sep 22, 2007
We just installed an application, WhatsUpGold, to monitor our servers. Management won't let me host that on my primary SQL box. So, we are using MSDE on the local machine (call that box my_netmon).
I can access the db with very basic functionality using osql while on the my_netmon machine. I've added my domain user account as a System Admin using the following commands.
exec sp_grantlogin @name
go
exec sp_addsrvrolemember @name, 'sysadmin'
But when I go to the my_sql machine and try to attach to it with Enterprise Manager I get an error that the server does not exist.
What gives??? Is it just not possible, or am I missing something here?
My goal is to just be able to see the data stored in the MSDE db. Write views, etc...
Please advise,
Marc
View 2 Replies
View Related
Jun 5, 2005
Hello All,I am using Visual studio.net framework 1.0 on win XP pro with MSDE. I am not being able to coneect to database using below code. can anyone suggest or have any idea what is going on? I have used all kinds of password and id. It doesnt pull data from DB. Really appreciate any help. Thank you in advance.
Sub Page_Load
If Not IsPostBack Then
Dim conNorthwind As SqlConnection
Dim cmdSelect As SqlCommand
Dim dtrCategories As SqlDataReader
conNorthwind = New SqlConnection( "Server=localhost;UID=sa;pwd=**secret**;Database=Northwind")
cmdSelect = New SqlCommand( "Select CategoryName From Categories", conNorthwind )
conNorthwind.Open()
dtrCategories = cmdSelect.ExecuteReader()
rptCategories.DataSource = dtrCategories
rptCategories.DataBind()
dtrCategories.Close()
conNorthwind.Close()
End If
End Sub
Sub Button_Click( s As Object, e As RepeaterCommandEventArgs )
Dim lbtnSelected As LinkButton
lbtnSelected = e.Item.Controls( 1 )
lblCategory.Text = "You selected " & lbtnSelected.Text
End Sub
View 8 Replies
View Related
Jun 2, 2005
I'm new to asp.net and databases and I'm currently working my way through SAMs Teach Yourself ASP.I am up to working with databases and have successfully installed MSDE using the sql2kdesksp3.exe file. However, when I try to create a new database through the web matrix project I get an 'unable to connect' error. I have tried removing and re-installing the database and I've also re-installed it using the latest file from the MS web site but I still get the same error. I've checked the obvious...that the msde service is running, password is correct, and that checks out ok.Has anyone had a similar problem and resolved it?Thanks.
View 2 Replies
View Related
Jan 2, 2006
Hi- I am hoping someone can help me or shed some light on an issue I am having.
I have recently moved to a dedicated server with MSDE installed on it. The server was installed as the default instance and I changed the password to the SA account. I then copied my entire SA database over to the new MSDE database and everything was working good so it seemed. I believe at some point during copying of the data, or after installalling an application the SA account begain to fail and the password was changed. I have no idea how this happened, and better yet when I tried to change it logged in as the administrator with OSQL it told me I did not have sysadmin rights (I tried multiple Windows NT Auth logins and still got this error trying to change the password).
So... I reinstalled MSDE and created a named instane. I then attached the mdf/ldf files to my named instance and am able to connect ok from a .NET application directly to my new MSDE Named Instance database. Sounds like everything is great right? Not really, I can't figure out how to connect through enterprise manager and its driving me CRAZY!
1. I CAN connect via any .NET app and a connection string
2. I CAN connect via the server with OSQL
3. I CAN connect via the web based enterprise manager (which is very limited and a freeware ASP app).
4. I CANNOT connect via enterprise manager. I have verified from the (SVRNETCN.EXE utility) that the port is open and have tried connecting to MY_IPADDRESSNAMEDINSTANCE but no luck.
One additional side note, when I wasn't using a named instance I had no problems connecting through enterprise manager to my default MSDE instance.
Any help would be grealy appriciated, this is driving me nuts!
-Chad
View 1 Replies
View Related
Nov 9, 2006
Hi all,
WSUS is installed on my windows 2003 server. During the install, parameter DISABLENETWORKPROTOCOLS was not specified, and so no remote connection was possible.
I used SVRNETCN.exe to enable TCP/IP remote connection on port 1433. However it seems not to work.
FROM THE SERVER :
osql -E -S MYSERVERWSUS works fine but
osql -E -S 127.0.0.1WSUS doesn't work, i get the famous error
[DBNETLIB]Serveur SQL spécifié non trouvé.
[DBNETLIB]ConnectionOpen (Connect()).
If i user "osql -L" command, my instance doesn't appear in the list
FROM A CLIENT COMPUTER
osql -E -S MYSERVERWSUS and
osql -E -S MY_SERVER_IPWSUS don't work, i get the same error
I've tried tried to understand for hours, and i'm lost. I thought there may be a problem between SQL and 2003, and read SQL sp3a was required. I ran
select @@version from osql and got result
Microsoft SQL Server 2000 - 8.00.881 (Intel X86)
8.00.881 is not referenced in ms support as a patched version number !!!!!
Can anyone help me please ?
View 1 Replies
View Related
Jan 12, 2007
Hello,
I have one program using MSDE as database. It runs OK on the machine with MSDE or without MSDE.
But it can not connect to MSDE database if PC with 'Microsoft SQL Server 2005' and 'Microsoft SQL Server Desktio Engine(MICROSOFTSMLBIZ)' installed.
Form SQL Server Server Manager: my instance ...MYINSTANCE and ...SQLEXPRESS are both running OK.
Why not connect to my MSDE instance under this situation? Could anyone give me any advice?
Thanks,
Dennis
View 6 Replies
View Related
Feb 8, 2007
Hi all,myDB is located atX:Program FilesMicrosoft SQL ServerMSSQLDatamyDB.mdfand my code is located at : C:Inetpubwwwrootapplicationfolderhow do I code my server.mapPath?
Btw, can I get VS 2005 to detect the server path when using server solution.Thanks
sub Page_Loaddim dbconn,sql,dbcomm,dbreaddbconn = New OleDbConnection("Provider=Microsoft.Jet.OLEDB.4.0;data source=" & Server.MapPath("X:Program FilesMicrosoft SQL ServerMSSQLDatamyDB.mdf"))dbconn.Open()sql = "SELECT * FROM myTable"dbcomm=New OleDbCommand(sql,dbconn)dbread=dbcomm.ExecuteReader()myDB.DataSource = dbreadmyDB.DataBind()dbread.Close()dbconn.Close()end sub
View 1 Replies
View Related
Dec 28, 2005
If I already know that:
Domain: DM1
Server: SV1
Database: DB
user: u1
password: p1
How to connect to DB by Enterprise Manager ?
View 1 Replies
View Related
Dec 12, 2007
I have SQL Server running on a network and ACCESS db looks at it for the data. I have a computer in a remote office and I want to update my ACCESS db to look at that remote server. What do I need for it?
View 4 Replies
View Related
Nov 1, 2006
I’m going nuts and need some help with my ASP.NET 2.0 application which has trouble talking to a remote SQL Server 2000. First, before I describe my problem let me say that everything works perfectly on my XP development workstation when I point to the local SQL Server database. Screens load fine, saves and edits all work perfectly. Problem is when I connecting to SQL Server on a remote windows 2003 server I get Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Now, I’ve researched this error and have successfully made the following changes to the remote windows 2003 server where the database resides:1) Added logins for “ASPNET”, “NT AUTHORITYNETWORK SERVICE”, and “IIS_WPG”. The reason I added NT AUTHORITY is because we plan on deploying this web site to the same windows 2003 server and I understand that IIS6 (on this server) has ASP.NET running as NT AUTHORITY acct. 2) For all the logins above I’ve added them as users to the database and given dbo role. I still get same login for user null error when attempting to connect from my XP workstation. Can anyone help?
View 7 Replies
View Related
Nov 25, 2006
I recently reinstalled SQL Server 2005 on a new computer, and now I can't connect to remote SQL servers for some reason.
When trying to access the remote server with SQL Management Studio or DTS I get the following error:
-----------An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=53&LinkId=20476-----------
I'm certain the servers I'm trying to connect to allow remote connections so the fault must be on my side. Does anyone have any idea what the cause and solution might be?
View 5 Replies
View Related
Dec 6, 2003
How can I connect to a online SQL Server with Enterprise Manager?
View 3 Replies
View Related
Mar 14, 2004
Im the new in ASP.net.
I find no way to connect remote datebase(sql server 2000).
Everybody who have ways help me.
Thank you!
View 3 Replies
View Related
Feb 28, 2005
hey i created a client app.. i want to connect it to a remote db.. but i am not able to connect through the internet. but its working for LAN.
is there anything that i must change in the settings of the enterprise manager??
i am connecting through an sa password and i allowed other sql servers to connect remotely to this sql server using rpc...
i am using this code to connect . i am using vb.net
"Data Source=x.x.x.x;Network Library=DBMSSOCN;Initial Catalog=test;User ID=sa;Password="
View 6 Replies
View Related
Apr 18, 2007
Hi Folks I have faced a problem during my application development... The application which is manipulating data in SQL sever 2005 which resides on server Named [Mserver1]... Now in the local netwrok there are 10 Client Pcs... My application will be running on all of them... What connection string will i use for that.. Client Pcs have not got SQL on them... I am using visual studio 2005, SQL server 2005.
Any help ??
Thanks in advance
View 1 Replies
View Related
Jan 24, 2008
Hi, I have Windows XP Pro OS with SP2 and SQL Server 2005 installed.
I want to give Windows Authentication to my colleague sitting next to me, we are into same LAN. Is it possible to give access to my friend and if so can I create a seperate Security Group and add multiple users to them and give access.
-Senthil
View 3 Replies
View Related
