Can someone advise me if this is basically SQL server 2000 and will work effectively to simulate sql server on a stand alone development machine ? Is this what its meant for?
I'm just not clear on this, here is the link:
http://www.microsoft.com/downloads/details.aspx?FamilyID=413744d1-a0bc-479f-bafa-e4b278eb9147&DisplayLang=en
Thanks in advance for any advice.
My objective is to use Enterprise Manager to move (copy) my SQL db from the server to my windows desktop computer.
I downloaded MSDE and am having trouble installing it, no doubt because I do not understand the documentaion (ReadMeMSDE2000A.htm).
When I try to run setup, I get that message that says:
"A strong SA password is required for security reasons. Please use SAPWD switch to supply the same."
Considering my purpose, do I need a "strong" SA password? If not, how do I get around it? If yes, how do I set it up?
I am a Mac user so I have poor windows skills, please make it as painless as possible for me, thanks!
Ron
venu writes "Hi,
Am very new to MS SQL adminstration
Can anybody help me out how to work on Microsoft SQL Server 2000 Desktop Engine (MSDE 2000) Release A just for the practice.
The activity which am going to workout on MSDE is below.
How to install SQL(on XP)
How the layout will be(like if i insall MSDE what are all Application will be and how they depends on each other)
How to create/delete tables if so, how can we do it either by GUI or CUI
just i need a clarifications reg same
Thank you,
venu"
Hi
i'm chanaka my problem is i had a wsus 2.0 version server, last week my server disk was full, finaly i was move the Wsus data to new disk.with all the contens. when i try to move the datbase it's give the error.
when i open the wsus admin console it's give the error message. and it's add the event log error also. this thing is giving to me big problems.
Connection to database failed. Reason=Unknown error.. Connection string: Data Source=EMAIL-FILTERWSUS;Initial Catalog=SUSDB;Connection Timeout=60;Application Name=WSUS SQL Connection;Trusted_Connection=Yes;Pooling='true'; Max Pool Size = 100
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
if u can give me help. . please if u can give me help.
Best Regards,
shadow
Aucsna
I have a few questions about the SQL Server Desktop Engine (MSDE), sorry there are so many ..
1. Which software products does this come with ?
2. If I create a SQL Server Database and want to distribute it to clients, how do I actually do it with MDSE ?
3. If I need to "upgrade" my database at some point in the future (that may contain data at a client site) how would I go about getting all the data out - would I need to write an external app ?
4. What are it's pros and cons when compared to installing full SQL Server on a client site ?
5. I've heard that the preformance of an MSDE Database degrades severely after more than 5 concurrent connections, is this just due to the performance of the product or is it something to do with the licencing model ?
6. Is it possible to write applications in, say VB, to alter the database once it has been installed on client site e.g. modify/create tables, indexes, stored procedures ?
Thanks for any help in advance ..
Scott..
Dear all,
This week I was told to setup MSDE Desktop Engine on my pc bcz my Access back end db is getting bigger in size. And as a little advance step, I decided to put my Access back end on SQL server.
To be frank, I have no experience with SQL server but after reading the instructions, I have installed MSDE (latest version) on my pc successfully. A small icon of SQL server appeared nearby clock icon of my pc showing the SQL server is running on ASHFAQUEPC.
I shifted a Trial db onto this server in following way.
Considering the opened Trial db would be my BE, from the Tools---Database Utility---Upsize wizard, I followed below steps according to Upsize wizard.
1.I selected ‘Local’ server and check marked to ’Use Trusted Connection’.
2.And then I selected some tables to export
3.Kept all default attributes of db as it is
4.Selected ‘Let the wizard decide’ under data option to include.
5.At the next step ‘What application change do you want to make?
a.Create a new Access client/Server application.
b.Link SQL Server tables to existing application.
c.No application changes. (I selected this option)
Then it showed me the report of my db description of changes that were made after deploying it. The report I did not print bcz it was a trial db with one table (2 fields) and a simple query.
My idea was to connect my Trial BE with another one of another Access mdb file so FE would be Access and BE would be from MSDE.
1.Now I don’t know how to link my BE to my FE?
2.From where I can directly see my BE? Because SQL Server Service Manager does
not have any menu?
3.Where I was wrong in following steps?
Guidance in this regards is highly appreciated.
With kind regards,
Ashfaque
Trying to install Microsoft SQL Server 2000 Desktop Engine on my laptop. I downloaded the software and opened it to a folder on the C drive. Then from the command prompt I entered this:
C:msderela>setup sapwd = hillary instancename=mjh targetdir=c:mike
The program starts to install and seems to get near to the end of instal and then the progress bar starts going backwards and nothing gets installed....any ideas of what I'm doing wrong....I really don't know anything about this at all.
Thanks
Did a SQL Server Desktop Engine 2000 (MSDE) having SQL Agent module?
View 2 Replies View RelatedI have SQL Server 2000 installed on my laptop and am trying to install an instance of MSDE. I keep getting the error message: "The installation of SQL Server 2000 Desktop Engine has failed. Please see the Getting Started manual for further instructions."
I have done this installation before on other machines. Something must be corrupt on my machine (?). The error message is not very enlightening. Any ideas?
How do I add login user ASPNET to my SQL 2000 Desktop Engine Server?. I can not find the "Server Manager" in the Start - Programs. Is there any other way to get around adding ASPNET login to the SQL server so I can test my VB program. I got the error: Login failed for user 'com_nameASPNET'.
View 1 Replies View RelatedMy question is, is it possible to connect to an SQL database using the MSDE 2000 SP3a edition over the internet? And if so, how do I set it up? Thank you in advance.
View 1 Replies View RelatedHello,
I'm trying to install Microsoft SQL Server Desktop Engine (MDSE) and it said that I require a SA Password. I can't figure out how to do this.
Can anybody help?
Thanks,
Shenra
I'm in the process of attempting to install Microsoft SQL Server Desktop Engine on my computer in support of an email program call Mailloop6. I've tried going through their tech support but they haven't been able to figure it out.
I'm running Windows XP with SP1 upgrade on a DSL connection.
When I installed the program the first time, I got the following error:
"Setup failed to configure the server. Refer to the server error logs and
setup error logs for more information."
The program obviously wouldn't install. I contacted the vendor and they sent a version with a batch file. Same result. I removed all the appropriate registry entries between installs and removed all the data files as well.
I've tried installing the program using the free MDSE download from the MS site with the following result:
"A Strong SA password is required for security reasons. Please use SAPWD switch to supply the same. Refer to readme for more details. Setup will now exit."
Here's the error log that I got after attempting to install:
2004-02-25 19:31:42.55 server Microsoft SQL Server 2000 - 8.00.760 (Intel X86)
Dec 17 2002 14:22:05
Copyright (c) 1988-2003 Microsoft Corporation
Desktop Engine on Windows NT 5.1 (Build 2600: Service Pack 1)
2004-02-25 19:31:42.55 server Copyright (C) 1988-2002 Microsoft Corporation.
2004-02-25 19:31:42.55 server All rights reserved.
2004-02-25 19:31:42.55 server Server Process ID is 3404.
2004-02-25 19:31:42.55 server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL$MAILLOOP6LOGERRORLOG'.
2004-02-25 19:31:42.56 server SQL Server is starting at priority class 'normal'(1 CPU detected).
2004-02-25 19:31:42.60 server SQL Server configured for thread mode processing.
2004-02-25 19:31:42.60 server Using dynamic lock allocation. [500] Lock Blocks, [1000] Lock Owner Blocks.
2004-02-25 19:31:42.63 spid3 Warning ******************
2004-02-25 19:31:42.63 spid3 SQL Server started in single user mode. Updates allowed to system catalogs.
2004-02-25 19:31:42.63 spid3 Starting up database 'master'.
2004-02-25 19:31:42.91 server Using 'SSNETLIB.DLL' version '8.0.766'.
2004-02-25 19:31:42.94 spid5 Starting up database 'model'.
2004-02-25 19:31:43.24 server SQL server listening on 152.163.0.0: 4113.
2004-02-25 19:31:43.24 server SQL server listening on 172.16.1.33: 4113.
2004-02-25 19:31:43.24 server SQL server listening on 127.0.0.1: 4113.
2004-02-25 19:31:43.25 spid3 Server name is 'MONSTERMAILLOOP6'.
2004-02-25 19:31:43.25 spid3 Skipping startup of clean database id 5
2004-02-25 19:31:43.25 spid3 Skipping startup of clean database id 6
2004-02-25 19:31:43.25 spid3 Starting up database 'msdb'.
2004-02-25 19:31:43.56 spid5 Clearing tempdb database.
2004-02-25 19:31:44.13 spid5 Starting up database 'tempdb'.
2004-02-25 19:31:44.17 spid3 Recovery complete.
2004-02-25 19:31:44.17 spid3 SQL global counter collection task is created.
2004-02-25 19:31:44.19 spid3 Warning: override, autoexec procedures skipped.
2004-02-25 19:31:47.75 server SQL server listening on TCP, Shared Memory, Named Pipes.
2004-02-25 19:31:47.75 server SQL Server is ready for client connections
2004-02-25 19:31:57.97 spid3 SQL Server is terminating due to 'stop' request from Service Control Manager.
Any thoughts on this would be very much appreciated!
i have got to connect to sql server desktop engine over internet with the following connection string
conString = "Provider=SQLOLEDB.1;Persist Security Info=True;Initial Catalog=" & dbName & ";Network Address=" & IPAddress & ";Data Source=" & DataSource & " ;User ID=" & UserId & " ; Password=" & Password
Plz also inform me about the restriction imposed in connectivity by any of the window operating system such as that win 98 wont work or work!
There is no firewall involved. The two computers are in the same room and connected directly to the internet.
Even the ping is not going to either computer.
So what could be the possible problem and the solution.
need urgent
Hi,
what is the distribution fee for SQL Server 2005 Desktop Engine distribution? Where can I find this information? I don't need it for development only for distribution.
Thanks,
LearningWPFnDotNet
I have got SQL Server Desktop Engine running with 2 database and I need
to install the evaluation version of SQL Server 2005 instead. A
straight upgrade does not seem to be possible. Does someone know if
backing up the databases, uninstalling the desktop engine, installing
SQL Server 2005 and then importing/restoring the databases would be an
option to look into?
Dear friends,
View 3 Replies View RelatedDuring installation of MSDE the installation hangs at "please wait while Windows configures microsoft sql server desktop engine" I always end up killing the installation process. I am trying to install Windows XPe dev kit and this is the step I am getting stuck on. If I try to skip this step and setup the database the setup obviously tells me that i dont have sql 200 or MSDE installed.
The KB article http://support.microsoft.com/kb/811479 describes the syptoms perfectly, but fast user switching isnt even enabled for this machine and is not the source of the problem.
hi dear developers;
i just finished my program and i am making a setup for it but the db is MSSQL SERVER 2005. the home users how will they use sql server 2005? is there any thing like sql server 2000 desktop engine? something like that... shortly the user don't have to know sql server and settings of it so how will we do it???
thank you very much...
its sql server 7.0 and im looking for the service network utility and service manager that it didnt come with.. where can i download it?
View 1 Replies View RelatedHi,I'm trying to install MSDE Desktop SP3a SQL server on my Windows 2000 Professional Laptop.Every time I try it nearly finishes the installation and then just rollsback.Can anyone help? Is this a known issue?Thanks in advance,Jocky
View 3 Replies View RelatedI was looking at the registry key value "ConcurrentLimit" in
"HKEY_LOCAL_MACHINE'SOFTWAREMicrosoftMicrosoft SQL Server80MSSQLLicenseInfoMSSQL8.00"
and wondering if this the concurrency control of SQL Server. Can someone please verify??
One of our SQL Production Server I inherited was installed with this version by mistake. The value for this key was set to 2. Does this mean it only allows 2 concurrent access to the SQL Server??
Thanks...byyu :)
hI I M VERY MUCH NEWTO ASP.NET +SQL SERVER U CAN SAY I JUST INSTALL
BOTH WHEN I I FIRST INSTALL QUICKSTART TUTORIAL OF MS.NET2003 IT ASK ME
TO COPY MY DATABASE file to sqlserverosql -E -S (local)NetSDK -i InstPubs.sqlosql -E -S (local)NetSDK -i InstNwnd.sqlosql -E -S (local)NetSDK -i Portal.sqlosql -E -S (local)NetSDK -i Grocer.sqlwhen i tries to do that it give me the following errors
[DBMSLPCN]SQL Server does not exist or access denied.[DBMSLPCN]ConnectionOpen (Connect()).
well my sql server name is www
same as my computer name (www)services is sql servermy computer is running xp sp2and i m running .net1.1also please tell me how to Granting Access to the ASPNET usermy asp.net user name is ASP.NETif i have to reinstall sql server 2000 tell me what step i should follow to configure it correctlyi m waiting for ur QURU's answers hopefully soonhave a nice dayHUssain
Has anyone had trouble accessing SQL 2000 desktop install over the LAN on SBS 2003?
I cannot access my installation from the same domain, yet when I install it on a machine running something other than SBS 2003 there are no problems.
Everything seems shared correctly, and I have tried loggin on to the remote machine as Administrator with no success.
Any suggestions would be appreciated.
My coworker tried install SQL server 2005 on a server. The server already has a desktop engine running as "MSSQLServer". Because the new sql server 2005 need running as a default instance. So he still using "MSSQLServer" as the instance name.
After installation, the service's running file seems still point to the old location. When view the properties on Management studio, it still report as "desk top engine" and the version is 8.xx..xxxx.
My question is,
1. What has been done during the installation? Is current desktop engine was upgraded?
2. In current situation, what can we do to install the SQL server 2005 as a default instance. Is there way to rename the desktop engine to a named instance?
Thanks
HELP! this is driving me mad!!
I installed MSDE desktop with no problems... months later when creating a database, I stupidily forgot the "sa" password that I set during setup... So I decided to unistall MSDE and reinstall it, this time documenting the username and password... BUT now it is giving me errors which I am unable to solve... is there anyone out there that might be able to help me??
I go to a command-line, locate the directory where the install program lives and type in "setup SAPWD=(a password) SecurityMode=SQL" and it returns the follow error message:
"Setup Failed to configure the server. Refer to the server error logs and setup error logs"
My problem is I don't know where to locate these error logs. Please if anyone can help me with this problem I would greatly appreciate it.
thanks, Donald - email = pizzazzz@cox.net
i installed the MSDE2000A on server and i tried to connect from client machine through vb Application using connection string. Server anad client are in LAN. but Some systems able to connect and some systems are unable to connect.
i am getting the error:
"SqlServer does not exist or access denied "
for non connected machines.
the server is listening from these machines. but not connecting to MSDE.
can anyone give me solution what may be the cause.
Hello.
Has anyone attempted and successfully installed SQL Server 2000 SP4
via remote desktop on the cluster.
The reason I am asking is that SP4 readme file has this:
"...
4.3 Systems Management Server Distributed Installation
You cannot install Database Components SP4 from a remote location.
..."
Currently SQL Server has SP3a installed.
Thank you in advance.
Hi,
I have question regarding the MSDE and its service pack information.
For example,
How i can get the installed MSDE version and its service pack information in a given desktop?
Is there any way to find the above using APIs?
Can anybody help me in this
Thanks in Advance
Regards,
Alagumani Boju.
Software Engineer - Developer.
Hi there,I sincerely hope that someone out there can help. I have twoinstances of the SQL 2000 Desktop Engine running. One is on my localmachine for development and the other is on another machine on ournetwork which is the production environment. I have built an Access2003 front end application which connects to this database. Thisworks fine locally, as you would expect. I successfully installed thedatabase on the production machine and am able to connect to it viaAccess 2003 (using the Data Link Properties window) and from thirdparty database manager software (similar to Enterprise Manager). I amnot able to to connect to the database via my application.I am using the "sa" account with a strong password. This is myconnection string:strConnection = "Provider=sqloledb;DataSource=server02;UserId=sa;Password=strong;Initial Catalog=Test"The error I'm getting is:"Connection cannot be used to perform this operation. It is eitherclosed or invalid in this context."The connection string is the only thing that changes in my code when Iswitch from my local to my production database. Is there some reasonthat I can't use the "sa" account in this fashion that I'm not awareof? I'd rather not use integrated security for simplicity's sake asthis is a small, internal application. Also, I would have thoughtthat if that was the issue, I couldn't use "sa" at all, even locally.I'm going to post to the Access group as well but thought someone heremight have some advice to offer as well.Thanks,Barb
View 2 Replies View RelatedHi Everyone,Apparently, I was being asked on a question, "Why don't we procure adesktop PC to run MS SQL Server 2000 rather than a buying a server?".From a Management point-of-view, buying a desktop PC is much cheaperthan a server. However, I just wanted to understand that is it aviable solution given the database size is something around 200 GB?Equipping with more memory, more storage and a more powerful CPU on adesktop PC could really taking up the role to support the DBMS?Besides this "sensitive" costing concerns, what will be othersdifference in running the SQL Server 2000 on the two differenthardware architecture? For example, IO rate, reliability, RAID-1support, performance, … etc.(Note: The operating system is Microsoft Windows 2000 EnterpriseEdition)Regards,Ambrose
View 1 Replies View RelatedCan you install Sql Server 2000 Developer Edition with MSDE 2000 release A already installed?
View 2 Replies View Related
Parameter
Access 2000/XP
SQL Server 7.0
SQL Server 2000
MSDE 2000
Number of instances per server
n/a
n/a
16
16
Number of databases per instance / server
n/a
32,767
32,767
32,767
Number of objects per database
32,768
2,147,483,647
2,147,483,647
2,147,483,647
Number of users per database
n/a
16,379
16,379
16,379
Number of roles per database
n/a
16,367
16,367
16,367
Overall size of database (excluding logs)
2 GB
1,048,516 TB
1,048,516 TB
2 GB
Number of columns per table
255
1024
1024
1024
Number of rows per table
limited by storage
limited by storage
limited by storage
limited by storage
Number of bytes per row
(Excluding TEXT/MEMO/IMAGE/OLE)
2 KB
8 KB
8 KB
8 KB
Number of columns per query
255
4,096
4,096
4,096
Number of tables per query
32
256
256
256
Size of procedure / query
64 KB
250 MB
250 MB
250 MB
Number of input params per procedure / query
199
1,024
2,100
2,100
Size of SQL statement / batch
64 KB
64 KB
64 KB
64 KB
Depth of subquery nesting
50
32
32
32
Number of indexes per table
32
250 (1 clustered)
250 (1 clustered)
250 (1 clustered)
Number of columns per index
10
16
16
16
Number of characters per object name
64
128
128
128
Number of concurrent user connections
255
32,767
32,767
5