MSDE && SQL Server 2005 Mobile Server Tools Problem
Jan 24, 2006
After installing MSDE(with SP4) and SQL Server 2000 SP4 Replication Components, the SQL Server 2005 Mobile Server Tools installation fails when running the System Configuration Check with a SQL Server requirement Error.
"You must first install the Replication Components for SQL Server 2000 SP 3a or higher or the SQL Server 2005 Replication Components"
Am I getting this error because I'm using the Desktop Engine version of the SQL Server 2000??
View 7 Replies
ADVERTISEMENT
Jan 20, 2007
I have installed SQL Server 2005 Mobile edition and also the server tools.
I configured a website to sync with my mobile application. When I go t check the SQL server Mobile agent with this url:
http://localhost/MobileTest/sqlcesa30.dll i get a http 500 internal error
I am using remote desktop to access the machine, when I am directly on the machine there is no error I get the correct message in the browser
"SQL Server Mobile Server Agent 3.0"
Is access to the web site via remote desktop a problem?
jawahar
View 1 Replies
View Related
Nov 27, 2007
Is
"Microsoft SQL Server 2005 Mobile [ENU] Developer Tools"
equal to
"Microsoft SQL Server 2005 Mobile Edition"?
If not, what is it?
View 8 Replies
View Related
Nov 6, 2007
Hello,
I want to load-balance my PDAs accessing my database to make a merge replication.
As I have one server with the SQL Server Mobile Server Tools installed, can I configure some of these PDAs to use another server with SQL Server Mobile Server Tools to point on the same Database server?
Is it going to work or will it generate problems?
Thanks for your help,
Ben.
View 4 Replies
View Related
Sep 16, 2005
I am trying to install SQL Mobile Server Tools (beta 1) on my SQL
View 15 Replies
View Related
Sep 16, 2007
Hi:
When I try and connecto to SQL CE I always get an invalid operation exception. I"m afraid that I did not follow the proper install for Orcas Beta 2. I can't remember if I was supposed to uninstall SQL Mobile 2005 first or not.
All I know is when I try and use my SQL CE I can't connecto to a DB / sdf file ?
Any help would be appreciated I"m just starting to use SQL CE.
thanks
mark
View 2 Replies
View Related
Jan 13, 2006
I'm trying to install the SQL Mobile 2005 Server tools on a Windows 2003
Server with IIS & MSSQL 2000 sp4.
I've stuck .NET 2.0 on already, but the installer for the server tools
Sqlce30setupen.msi just goes straight to the last page of the wizard and says
the install was interrupted.
I've run the install with logging turned on and this is the last portion of
the trace. Can anyone shed any light on whats going wrong.
-------------------------------><-------------------------------------
MSI (c) (9C:14) [14:12:35:912]: Doing action: FindRelatedProducts
Action start 14:12:35: FindRelatedProducts.
Action ended 14:12:35: FindRelatedProducts. Return value 1.
MSI (c) (9C:14) [14:12:35:912]: Doing action: AppSearch
Action start 14:12:35: AppSearch.
MSI (c) (9C:14) [14:12:35:912]: Note: 1: 2262 2: Signature 3: -2147287038
MSI (c) (9C:14) [14:12:35:912]: PROPERTY CHANGE: Adding IISROOTFOLDER
property. Its value is 'C:Inetpubwwwroot'.
MSI (c) (9C:14) [14:12:35:912]: Note: 1: 2262 2: Signature 3: -2147287038
MSI (c) (9C:14) [14:12:35:912]: Note: 1: 1402 2:
HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SQL
Server90ToolsShellServices{CA8A686A-0882-4e79-BCA3-AF3F3AB3EB8A} 3: 2
MSI (c) (9C:14) [14:12:35:912]: Note: 1: 2262 2: Signature 3: -2147287038
MSI (c) (9C:14) [14:12:35:912]: PROPERTY CHANGE: Adding MDACFOUND property.
Its value is '2.80.1022.0'.
MSI (c) (9C:14) [14:12:35:912]: Note: 1: 2262 2: Signature 3: -2147287038
MSI (c) (9C:14) [14:12:35:912]: PROPERTY CHANGE: Adding ISIISINSTALLED
property. Its value is 'LocalSystem'.
MSI (c) (9C:14) [14:12:35:912]: Note: 1: 2262 2: Signature 3: -2147287038
MSI (c) (9C:14) [14:12:35:912]: PROPERTY CHANGE: Adding SQL2KREPLCLIENT
property. Its value is '{2FAD19D0-E309-11D2-B6E5-00C04F688E8F}'.
MSI (c) (9C:14) [14:12:35:928]: Note: 1: 2262 2: Signature 3: -2147287038
MSI (c) (9C:14) [14:12:35:928]: Note: 1: 2262 2: Signature 3: -2147287038
Action ended 14:12:35: AppSearch. Return value 1.
MSI (c) (9C:14) [14:12:35:928]: Skipping action: CheckOSVersion (condition
is false)
MSI (c) (9C:14) [14:12:35:928]: Doing action: CA_CheckInstalledSQL
Action start 14:12:35: CA_CheckInstalledSQL.
MSI (c) (9C:94) [14:12:35:943]: Invoking remote custom action. DLL:
C:DOCUME~1CharlieLOCALS~1Temp1MSIB.tmp, Entrypoint: CheckInstalledSQL
MSI (c) (9C:88) [14:12:35:943]: Cloaking enabled.
MSI (c) (9C:88) [14:12:35:943]: Attempting to enable all disabled priveleges
before calling Install on Server
MSI (c) (9C:88) [14:12:35:943]: Connected to service for CA interface.
Action ended 14:12:36: CA_CheckInstalledSQL. Return value 3.
MSI (c) (9C:14) [14:12:36:005]: Doing action: SetupCompleteError
Action start 14:12:36: SetupCompleteError.
MSI (c) (9C:54) [14:12:36:082]: Note: 1: 2731 2: 0
Action ended 14:13:33: SetupCompleteError. Return value 2.
Action ended 14:12:32: INSTALL. Return value 3.
MSI (c) (EC:00) [14:19:35:619]: Destroying RemoteAPI object.
MSI (c) (EC:0C) [14:19:35:619]: Custom Action Manager thread ending.
=== Logging stopped: 11/01/2006 14:19:35 ===
MSI (c) (EC:34) [14:19:35:619]: Note: 1: 1708
MSI (c) (EC:34) [14:19:35:619]: Product: Microsoft SQL Server 2005 Mobile
[ENU] Server Tools -- Installation operation failed.
-------------------------------><-------------------------------------
thanks
// charlie
View 3 Replies
View Related
Aug 8, 2006
Dear ppl,
I am writing an application for a device (MDA Pro T-Mobile) having Windows Mobile 5.0 using
-MS .NET Compact Framework 2.0 SP-1
-SQL Mobile 2005.
-VS 2005 .NET
The application uses Merge Replication. The error occurs in the Synchronise() Method of the SqlCeReplication object.
"SQL Server Mobile encountered problems when opening the database."
repl.AddSubscription(AddOption.CreateDatabase);
repl.Synchronize();
I don't understand why I am having this error. It does create the database on AddSubscription() method but it is failing opening the database on Synchronise(). I have also tried uninstalling and then reinstalling all the SQL Mobile components in the following order.
-sqlce30.wce5.armv4i.cab
-sqlce30.repl.wce5.armv4i.cab
-sqlce30.dev.ENU.wce5.armv4i.cab
However, when i run this application on a device(Dell X50 AXIM) with Pocket PC 2003, it runs fine creating the database and sysnchronising it.
The target platform for the project is Windows Mobile 5.0 Pocket PC SDK.
Does any one have any clue what could be the problem ?
Regards
Nabeel
View 6 Replies
View Related
Mar 23, 2006
Hello,
I am developping a non-managed C++ application for PocketPC using a SQL Server mobile database.
The application is compiled for PocketPC 2003 and uses SQL Server Mobile v2. I use Visual Studio 2005. But I need to compile the application for Windows Mobile 5.0 devices. So I installed the WM5 SDK and had the WM5 into my project configuration.
The "ssceoledb.h" which I include incluses the "transact.h" file. But my problem is that this file is only provided with the PocketPC 2003 SDK and not in the WM5 SDK.
So I cannot use the WM5 configuration project with SQL Server. I also tried with the last SQL Server Mobile 2005 (ie v3.0) and the "ssceoledb30.h" also includes "transact.h".
Did I miss something to install ?
Do you know how I can resolve the problem ?
By advance, thank you for any answer.
--
Gregoire
View 9 Replies
View Related
May 26, 2007
Hi,
I am using SQL Express 2005 server and sql compact edition for my PDA. For synchronization, which SQL Server 2005 Compact Edition Server Tools installation package do I use?
Is it Sqlce30setupen.msi or sql2kensp4.msi or sql2kensp3a.msi? I know for sql server 2005 its Sqlce30setupen.msi. Is it the same for the SQL Express 2005?
Thanks
View 4 Replies
View Related
Jul 18, 2007
Hello,
I have installed SQL server 2005 enterprise edition on Windows 2003 virtual PC (full installation). The installation went through successfully. However, after install completed, I cannot find any of the client tools under the start menu -> all programs -> Microsoft SQL server 2005 menu. The only item listed under the SQL server 2005 is Configuration Tools, which is used to configure the database server.
I have tried to install the client component again (in case I didn't install them at the first place) but the installation process cannot be started since it detected that the client components have been installed already. I can also see the sql server native client running in the services.
The server engine is working fine since I can connect to that sql server using another machine where I have the client tool (SQL server management studio).
One of my friends has exactly the same problem. He installed the sql server 2005 Standard edition on windows 2003 server (full installation), but the client tools are not showing up in the start menu either.
I also checked the location for the SQL server management studio (Microsoft SQL server/90/Tools/Binn/VSShell/Common7/IDE), there is only one folder called publicAssemblies listed under. Is this correct or something is missing?
Thanks
View 11 Replies
View Related
Oct 30, 2006
I am looking for a detailed tutorial that explains how to set-up merge replication services for a major project. I have seen all of the claims that SQL Mobile Server 2005 is able to connect to a merge publication with SQL Server 2000. However, where are the tutorials? I must have a proof of concept in a few days to quote this project. Can anybody help with this issue? Thanks!
View 1 Replies
View Related
Feb 2, 2007
Hello,
After installing SQL Server 2005, I get a message stating "You must use SQL Server 2005 management tools to connect to this server", while trying to connect to my localhost using SQL Server 2000 Enterprise Manager.
Regards,
junior
View 4 Replies
View Related
Mar 5, 2007
I have been investigating this issue and here is what I have found, when using SQL Server 8 Query Analyzer the results show that for example xp_regread has Execute permissions granted to €˜public€™ role. When checking the Same using the SQL Server 2005 Management Studio the results show that there are no Execute permissions granted to €˜Public€™ Role.
So the following Query doesn't return any results on Management Studio SQL Server 2005:
SELECT sysusers.name
, Status =
CASE protecttype
WHEN 204 THEN 'GRANT_W_GRANT'
WHEN 205 THEN 'GRANT'
WHEN 206 THEN 'REVOKE'
ELSE 'Unknown'
END
, Permission =
CASE action
WHEN 193 THEN 'SELECT'
WHEN 195 THEN 'INSERT'
WHEN 196 THEN 'DELETE'
WHEN 197 THEN 'UPDATE'
WHEN 26 THEN 'REFERENCE'
WHEN 224 THEN 'EXECUTE'
ELSE 'Unknown'
END
, sysobjects.name
FROM sysprotects, sysobjects, sysusers
WHERE sysobjects.id = sysprotects.id
AND sysprotects.action IN (193, 195, 196, 197, 224, 26)
AND sysprotects.uid = sysusers.uid
AND sysusers.name = 'public'
AND (sysobjects.name like '%xp_%' OR sysobjects.name like '%sp_OA%')
Where as running the Same Query in SQL Server 8.0 Query Analyzer will return results, saying there are a few extended procs available to Public for Execute.
Do you know whats going on here?
Thanks!
View 4 Replies
View Related
May 1, 2008
We have just moved from 2000 to 2005 and ever time I try to open store procedure or function I was getting this error message...
[Microsoft][ODBC SQL Server Drive] To connect to this server you must use SQL Server Management Studio or SQL Server Management Objects (SMO)
So I installed "Microsoft SQL Server 2005 Backward Compatibility Components" from "Feature Pack for Microsoft SQL Server 2005 - April 2006" on the client machine and this resolved the issue. Specifically i installed the "SQL Distributed Management Objects (SQL-DMO) feature .....,
how I am getting following error message
[SQL-DMO]You must use SQL Server 2005 management tools to connect to this server
How can I disabled all other features.
Thanks,
View 3 Replies
View Related
Jul 27, 2006
I'm creating a prototype of a PDA app using CF.Net 2.0 and SQL Server Mobile for a prospective client and I've gone through and designed,
built and populated a database using SQL Server 2005... and then
realised where I really need it is on the PDA! Without going through
all the pain of setting up SQL replication or writing all the code is there a way to export a
2005 database to SQL Server Mobile so it results in an .SDF file?
I know I can script each table out and run it via the SS2005 management studio when connected to a local .sdf file then copy that to the PDA but the thing is I really want to keep my test data so I don't have to re-enter it again.
TIA for any help... there must be a way to do this but I'm quite new to SQL Server Mobile and 2005.
Mike
View 9 Replies
View Related
Oct 3, 2007
We have recently updated an application from SQL Server CE 2.0 to SQL Server Mobile 2005 and we are seeing a huge decrease in performance? Is this normal? Database query that used to take 8 or 9 seconds are now around 20 secs, the database is only about 5 MB and the two tables in this particular query have 20 rows and 14K rows respectively. The query is basically:
select * from table1 join table2 on table1.myint = table2.myint
myint is the Primary Key of table2 and I have even created an index on myint for table1, any ideas?
Thanks - MTW
View 3 Replies
View Related
Jan 24, 2007
Hi,
Is there any way to measure bandwith usage during merge replication between sql server 2005 and sql server mobile 2005 running on a cradled wm5 mobile device.
Attaching the windows performance monitor to the network connection established over usb would work although I was wondering if there was something specific for this case integrated into Sql server 2005 / sql server mobile 2005 / Sql server management studio / third party tools that i could use ?
thnx,
pdns.
View 4 Replies
View Related
Jul 26, 2007
Hi,
I have a central database server that is runnning on SQL 2005 standard edition and Windows server 2003 standard as OS.
I realise that I can use SQL statements to encrypt and decrypt the data inside the standard SQL.
However, how do I read and write the data via an web application coded in C#.net and is also running on the same machine?
Another issue is, I need to replicate some of the data in this SQL standard over to a SQL mobile running on a mobile device running on Windows CE 5.0.
The mobile device also needs to read and write data to the encrypted data via a C#.net application.
Question is, with all these requirements to be met, can I use AES? I know that AES is not available on Windows XP and Windows Server 2000 and I cant find AES in the .net compact framework.
how do i go about ensuring security? how do I ensure that the symmetric key is the same both on the SQL standard and SQL mobile?
thank you.
View 7 Replies
View Related
Jan 9, 2007
hi,
I have some SQL CE database .sdf file on my handheld, and I was trying to connect to that file via SQL Server 2005 Management Studio, and it does not work. I am wondering if there is any good tool that I can use on desktop to connect to sqlce .sdf database file on my handheld?
Thanks.
View 1 Replies
View Related
Apr 10, 2008
I have written following code in my application
I just want to display all the data of a Single table into a Data Grid, I know that we can drag and drop the table on to a form and datagrid is generated, but here I want to retrive those values through my code, how should i do that
I am getting following errors while running the program
Error 1) Error No. 28037, MS SQL Server 2005 Evrywhere Edition
Error: A request to send data to the computer running IIS has failed. For more information see HRESULT
Error 2) Error No. 0, SQL Server 2005 Evrywhere Edition ADO.Net Data Provider
Error: The specified table does not exist [ JobLists ].
Can anybody please tell me, where I went wrong ??? In this code anywhere else????
Note: While adding a Data Source of SQL Server 2005 Mobile Edition, I have added that .sdf file into my project, thats why I have written the Data Source as : .DbFile.sdf
@"Data Source = .DbDotNetCF.sdf";
The code is as follows:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
using System.Data.SqlServerCe;
namespace DeviceApplication1
{
public partial class Form1 : Form
{
string filename = @".DbDotNetCF.sdf";
private DataSet dsJobLists;
public Form1()
{
InitializeComponent();
}
private void DeleteDB()
{
if (System.IO.File.Exists(filename))
{
System.IO.File.Delete(filename);
}
}
private void Sync()
{
SqlCeReplication repl = new SqlCeReplication();
repl.InternetUrl = @"http://localhost/WebsiteDotNetCF/sqlcesa30.dll";
repl.Publisher = @"RAHU";
repl.PublisherDatabase = @"DotNetCF";
repl.PublisherSecurityMode = SecurityType.NTAuthentication;
repl.Publication = @"PubDotNetCF";
repl.Subscriber = @"SubDotNetCF";
repl.SubscriberConnectionString = @"Data Source='" + filename + "';Max Database Size=128;Default Lock Escalation =100;";
try
{
if (!System.IO.File.Exists(filename))
{
repl.AddSubscription(AddOption.CreateDatabase);
}
repl.Synchronize();
}
catch (SqlCeException ex)
{
DisplaySQLCEErrors(ex);
}
finally
{
repl.Dispose();
}
// Display Same Data In Another DataGrid : dataGrid1
SqlCeConnection cn = new SqlCeConnection(@"Data Source='" + filename + "'");
SqlCeDataAdapter daJobLists = new SqlCeDataAdapter("SELECT JobListsID, JobID, PersonID FROM JobLists", cn);
if (dsJobLists == null)
{
dsJobLists = new DataSet();
}
try
{
dsJobLists.Clear();
daJobLists.Fill(dsJobLists, "JobLists");
dataGrid1.DataSource = dsJobLists.Tables["JobLists"];
}
catch (SqlCeException ex)
{
DisplaySQLCEErrors(ex);
}
}
private void DisplaySQLCEErrors(SqlCeException ex)
{
for (int i = 0; i < ex.Errors.Count; i++)
{
MessageBox.Show("Index #" + i.ToString() + ""
+ ex.Errors.Source + ""
+ "Error: " + ex.Errors.Message,
"Error No. " + ex.Errors.NativeError.ToString());
}
}
private void Form1_Load(object sender, EventArgs e)
{
Sync();
DeleteDB();
if (DbDotNetCFDataSetUtil.DesignerUtil.IsRunTime())
{
// TODO: Delete this line of code to remove the default AutoFill for 'dbDotNetCFDataSet.JobLists'.
this.jobListsTableAdapter.Fill(this.dbDotNetCFDataSet.JobLists);
}
}
}
}
I have created a merge replication correctlly( I suppose, there were no errros)
Please help
Your help will be appriciated
View 1 Replies
View Related
Aug 10, 2007
Hello Everyone,
I'm trying to connect to Desktop SQL Server 2000 from Windows mobile PC Emulator (VS 2005). I need a direct connection using connection string to SQL Server 2000 through local wireless network without IIS.
Bellow is the code that I use. After executing this code I get an error on line Conn.Open(). Error says SQL Server does not exist or access denied.
SQL is un and running, and I can log in using SA username from the desktop. Even if I chance IP for another SQL server in my connection string I still get the same error. There is no firewall of any kind running.
Dim connectionSTR As String = "Persist Security Info=False;Integrated Security=False;Server=192.168.0.202,1433;initial catalog=MyDB;user id=sa;password=;"
Dim Conn As SqlConnection
Conn = New SqlConnection(connectionSTR)
Conn.Open()
If Conn.State = ConnectionState.Open Then
MessageBox.Show("Open")
End If
About my environment: SQL Server 2000 is running on Desktop PC with Windows XP SP2. Application which I need to connect to SQL Server is in Visual Studio 2005. I execute the application in Windows Mobile PC Emulator and try to connect to SQL Server from emulator.
Your advice and help is very appreciated
Thank you
Ika
View 3 Replies
View Related
Mar 18, 2008
Hi,
I understand from previous threads that installing SQL Server 2005 Service Pack 2 on the desktop client can speed up the response rate of the Visual Studio 2005 Business Intelligence Tools.
However after logging on as an administrator and installing Service Pack 2, Service Pack 2 returned no errors. However after launching Visual Studio and clicking on the about dialog box the version reported was still €œRTM.050727-4200€? where I was expecting to see €œSP.050727-7600€?.
I understood that I applied the same service pack to my copy of SQL Server on my laptop and the upgrade worked successfully.
Can anyone help?
Thanks in advance,
Kieran.
View 9 Replies
View Related
Feb 26, 2008
I'm attempting to use RDA to synchronize a pocket pc emulator with SQL Server 2005 database by following tutorial http://msdn2.microsoft.com/en-us/library/aa454892.aspx, which uses AdvWorksMobile database that comes with SQL Server 2005.
When get to testing of "To test application features " ( step 4 of the merge replication setup lab ), I am receiving SQLCe Exception errors.
ORIGINALLY, I was able to deploy an application and view the local database on the emulator, but once I clicked "InitSinc" button, I received an error.
"Failure to connect to SQL Server with provided connection information. SQL Server does not" exist, access is denied because the SQL user is not a valid user on the SQL Server, or the password is incorrect.
Found this error listed in Server Agent Errors log http://technet.microsoft.com/en-us/library/ms172357.aspx, but it wasn't very helpful since it doesn't provide any suggestions on fixing the problems.
I am brand new to SQL CE Server , mobile programming and .NET framework in general so please bare with me
All the connections / security settings, etc that were set up were taken from a tutorial so I am not sure what SQLCeServer is complaining about. Reading up on the error on the web didn't help, it all pointed to making sure that the snapshot folder had correct permissions set up. I verified that MACHINENAMEUISR_MACHINENAME guest user had Read rights to the database so I don't think that piece is the problem. Otherwise ,Merge publication has been setup in Microsoft SQL Server Management Studio by following the tutorial.
I am trying to run this sync on my home pc so there should be no issues with any user permissions
I have IIS installed
I did NOT have SQL Server Agent running in management studio at this time
I am trying to run this tutorial on an XP machine, which is my regular home PC so I dont think there are any special networking settings to consider
I am able to hit http://localhost/AdvWorksMobile/sqlcesa30.dll from my pc OK, but when I try to hit it from a cradled emulator ( after replacing "localhost" with "MACHINE_NAME" ), Internet Explorer on the emulator gives me a "Cannot Connect With Current Settings" error message. This part wasn't part of tutorial but decided so not sure if I am supposed to be able to hit it from my emulator..so I am not sure if the fact that I can't hit it is related to the problem.
AFTER STARTING SQL SERVER AGENTin Microsoft SQL Server Management Studio, I killed the application, and after relaunching it, it hits "The Specified table does not exist [Vendor]" error. This time it doesn't even launch first - that is I dont even get to pressing "InitSinc" button. Debugger is showing that this error is hit on the following line in AdvWorksMobile.AddWorksDataSetTableAdapters
int returnValue = this.Adapter.Fill(dataTable);
I am not sure why the errors changed on me after starting SQL Server Agent.
What can I do to fix this connection problem?
Thank you so much for your help!
Irina
View 3 Replies
View Related
Aug 6, 2007
Hello,
at the moment I have the following problem:
We have installed a version of the MSDE 2000 Sp3 with our software since 2005. Now we install SQL Server Express 2005 in order to use the latest version and to be compatible with Vista.
We have never had any problems with the MSDE, so it was no problem that we installed the german version (by mistake) because there never was any output at installation time.
When we now upgrade the existing MSDE installing the new version of our software, there are often problems and there are error messages, unfortunately in german, which cannot be read by most of our international users.
The problem is, that there seems to be no possibility to upgrade the existing (german) MSDE with the english version of SQL Server Express 2005.
My question is, if it is possible to upgrade the german MSDE to the english SQL Server 2005 to enable our international users to read the error messages at installation time in english?
Thanks in advance.
Best regards,
Peter
View 4 Replies
View Related
Jan 12, 2006
Hi Team,
Is there any management tools in SQL SERVER 2005? I just installed my standard edition and also developer version in different computer, but seems that both versions doesn't support management tools such as query analyzer.
Can anyone explain to me...
Thanks.
View 2 Replies
View Related
Oct 15, 2007
What is the quickest and easiest way to use client tools for 2005 like 2000....
?
View 4 Replies
View Related
Jul 5, 2007
I have seen the
Tools------>External tools
in sql server 2005 window
What external tools are used ? How they are used?
Plz give me the link to study this
Thanks,
Swati
View 3 Replies
View Related
Dec 31, 2007
Question 1
I want to check which is the best easy to use cost saving tool in sql server which can do a check the performance of a query and rewrite the query with best performance
Question 2
Which is the best tool for load testing tool in sql server, which is easy to understand and use.
Question 3
Which tool monitors the changes in the server including the dba's activities and send report to the audit team.
Qustion 4
Which tool can send notification about the job's failed , backup task failed etc.
Question 5
Which tool can suggest the correct index for all the tables
Please recommend me a tool for all this which is easy to use + cost saving and their licencing details with their pricing.
View 3 Replies
View Related
Apr 6, 2008
Hello,
I am developing a mobile application in which i have to create a database..
My database contains relationships between its tables..
I would like to know what is the best solution for developing the database?? SQL mobile edition or RMS!!!
If you say RMS, how should i create the relationships between my tables??
thnx
View 1 Replies
View Related
