MSDE Max Field Size?

Mar 28, 2005

Hi,

I have MSDE installed on my computer and I'm using Web Data Administrator to manage my databses. The problem is that whenever I add a column with a length of more than 8000, I get the following error:

Length must be between 0 and 8000

If I create the column programmatically then i get this error:

The following error occured while executing the query:
Server: Msg 131, Level 15, State 2, Line 2
The size (8005) given to the column 'Article' exceeds the maximum allowed for any data type (8000).

I need several columns that can hold around
32,000 characters. What's the deal? Is this a limit with MSDE, or am I
missing something?

Thanks

View 9 Replies


ADVERTISEMENT

Max Database Size For MSDE 2000

Nov 6, 2007

It is assumed the max database size for MSDE 2000 is 2GB. But actually I am able to save more than 2 GB to an MSDE database, now its size is more than 5GB. I am confused. What is the actual size limit for MSDE?

View 5 Replies View Related

How To Alter The Transaction Logfile Size In MSDE 2000?

Dec 1, 2004

Hi there,

I recently saw that the transaction log files of user dbs grow undefinitely in SQL Server 2000 - one of our customers had a 11 GB log file which totally slowed down the server.
Another customer of ours uses one of my applications logging all actions in a MSDE database file and I fear that the corresponding transaction log file will grow and block the system too - is there any way that I could shrink and set the max size of the transaction log file through SQL?

I already know the command "SHRINK FILE ('filename')" but I haven't found a SQL command to set the max size.

Thank you for any hints!

Sascha

View 3 Replies View Related

Adding Field Or Stored Procedure To MSDE

Jan 7, 2004

Is there a way to add a field or a stored procedure to a server running MSDE? Like a script on the command line or?? how can this be done.

Thank you,

View 5 Replies View Related

Size To Specify For Varchar(Max) Field

Mar 23, 2008

After reading Dan Guzman's blog entry (http://weblogs.sqlteam.com/dang/archive/2008/02/21/Dont-Bloat-Proc-Cache-with-Parameters.aspx) I started modifying some of my code to try it out and ran into a stumbling block. What size would you specific for a varchar(MAX) field?
Since a varchar max field can hold up to 2 billion chracters I really don't think I need to specify 2 billion as the size. Anyone have any ideas?
 

View 2 Replies View Related

Size Of AutoNumber Field

Sep 11, 2006

Hi,

what happens when the autonumber field becomes bigger than MAX_INT?
If I get arithmetic overflow, how i can avoid this problem?

Thanks in advance

-december

View 2 Replies View Related

Field Size Too Large

May 9, 2008

I have set up transaction replication between two databases. Data from a table in the first database is replicated to the same table in another database.

The table at the publisher already has some data in it. The table at the subscriber is empty. When the replication is synchronizing, I get the following errors in the replication monitor:
*The process could not bulk copy into table "dbo"."virtualdatalocations_waitingqueues". (Source: MSSQL_REPL, Error number: MSSQL_REPL20037) Get help: http://help/MSSQL_REPL20037
*Field size too large

The table looks like this:
CREATE TABLE virtualdatalocations_waitingqueues (
dataid int ,
personid int ,
queueid int ,
CONSTRAINT FK_vw_dataid
FOREIGN KEY(dataid) REFERENCES datalocations(id) ON DELETE CASCADE ,
CONSTRAINT FK_vw_personid
FOREIGN KEY(personid) REFERENCES persons(id),
CONSTRAINT FK_vw_queueid
FOREIGN KEY(queueid)REFERENCES waitingqueues(id)
);

It used to run fine in the past. I couldn't find any help on google or on forums.

Any help or comments are greatly appreciated.

View 6 Replies View Related

What Size To Make The Binary Field?

Jul 12, 2006

Hi,
I have asked this question on 3 forums now and never get an answer, I don't know what is so hard about this question but I will try it here.
I am using SHA512 in C# to convert a password and its salt to hashed. I need to store the password hash and the salt hash in the database in two fields. I was told to use binary field to store the hash data and that the output of SHA512 would ALWAYS be the same no matter how long the password is.
I modified this hash example to use only SHA512 and to work with byte array instead of plain text.
All I need to know now is what size I need to make my binary field to hold this password that is hashed.
http://www.obviex.com/samples/Code.aspx?Source=HashCS&Title=Hashing%20Data&Lang=C%23
Say I have a password which is 30 characters max, and a salt which is 16 characters max. The password and the hash are stored in seperate fields in the same table. They are both hashed using SHA512 and are both being stored as byte arrays in C#, what size to I need to make the binary data type in order to hold the password, and to hold the salt.
Thanks!

View 4 Replies View Related

Question Regarding Size Of Varchar Field

May 26, 2005

Hi,I am using MSDE together with Enterprise Manager.I have a table with a field named description.This field will be filled by a web forms's textbox web control.The textbox's maxsize attribute is set to "3000" characters.What size do I have to adjust for my DB field description?Is the size of 3000 in Enterpise Manager equal to 3000 characters for the textbox?I am just trying to avoid errors if MSDE cuts off the string that comes from the textbox webcontrol.

View 4 Replies View Related

Help Finding Current Size Of A Field

Jan 19, 2006

How do I find the current size of each field in a table's column?

I have a table with a field for notes/memos. I need to see which ones are about to reach the size limit and what the current size is.

Does this make sense?

Thank you,
Karen

View 2 Replies View Related

Changing The Size Of A Varchar Field

Jul 7, 2006

We have a small table of about 13 million rows that needs altered. A column in the table needs to be changed from a varchar(20) to a varchar(500). When we ran the alter table script, 3 hrs later and it wasn't done running. Any suggestions on what we can do to speed up the process?


Thanks ahead of time
DMW


Edit:
We are running SQL Server 2000 and the db at the time was running in simple mood

View 1 Replies View Related

Replication Field Size Error

Apr 24, 2006

Hi,

I have been running a merge publication & 4-5 subscriber all running perfectly good, but today I started getting this error below? I generated a new dynamic snapshot and re init the subscriber, but still the same. I synchronized the other subscribers and they are all running with no errors, even after a init. I.E. I would think this is data related, to this subscriber, but I have no further ideas how to track it down?

any ideas?

Regards

Gert Cloete







bcp "conCORD_ODS"."dbo"."MSmerge_contents" in "\OBSQL2005\ConcordReplData\MERCURYSQLEXPRESSOBSQL2005$DEV_CONCORD_ODS_CONCORD_ODSMSmerge_contents90_forall.bcp" -e "errorfile" -t"<x$3>" -r"<,@g>" -m10000 -SMERCURYSQLEXPRESS -T -w





To obtain an error file with details on the errors encountered when initializing the subscribing table, execute the bcp command that appears below. Consult the BOL for more information on the bcp utility and its supported options.





End of file reached, terminator missing or field data incomplete





Field size too large





The process could not bulk copy into table '"dbo"."MSmerge_contents"'.

The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.

View 6 Replies View Related

Min Output Size For Queried Field

Oct 12, 2007



I have a select statement that is being processed through oSql on Sql Server 2000. There are 2 fields in the select statement that are defined in the dateabase as nvarchar(1). When I perform my select statement, they show up in the output as 4 char fields. See dataset below for example.



493575545493575545003753404A 20070805000000002007080520070805 131307269009426800000000000000000000000
493575545493575545003753404A 00000000000000000000000020010410S 131307270009426800000000000000000000000
493575545493575545003753410A 20070805000000002007080520070805 131307271009426800000000000000000000000

How do I get rid of the extra spaces in the output? I have tried using ltrim(rtrim(fielde)) to no avail. Fieldg (the S) is a nullable field and is being processed using an isnull(filedg, ' ').

The general statement is:

Select fielda, fieldb, fieldc, ltrim(rtrim(fieldd)), fielde, fieldf, isnull(fieldg, ' '), filedh from mytable

The functioality can be replicated using:

Select 'a', 'b'

---- ----
a b
(1 row(s) affected)


Any Ideas?

Thanks in advance.

Aaron

View 2 Replies View Related

Parameters Input Field Size

Jul 2, 2007

Hi,



is it possible to change the appearence of input fields for parameters on the report server? My parameter is Multi-value with quite large amount of available values. On report server, user can (without scrolling) see only the first value. Parameter values are quite long, so user has to move alternally with both vertical and horizontal scrollbars to find the right value.



Thanks

Janca

View 1 Replies View Related

Does The IDENTITY Field Type In SQL Have A Maximum Size To It?

Mar 11, 2007

Does the IDENTITY field type in SQL have a maximum size to it?
 
You know like int only goes so high up,

View 1 Replies View Related

Query To Change Increase The Size Of A Field

Apr 11, 2007

Hi all,
I tried to change the size of a field of my table using the query :-

ALTER TABLE test MODIFY id varchar(50)

Initially the size of id was set to 30 .Is there any other way or any error in my query.Please help me soon.



joshymraj

View 2 Replies View Related

Expression: Conditional Formatting Of Field Size!

Apr 11, 2008

Can I build an expression that allows me to change the field size of a column or row in SSRS2005?

View 5 Replies View Related

How To Calculate The Size Of A VARBINARY(max) Field Or Variable

Jan 7, 2008



How can i do the following:


Calculate the size of a varbinary(max) field or variable

Calculate the average of a varbinary(max) table column
I am using SQL 2005
Thanks for your posting

View 3 Replies View Related

Can I Make The Size Of The Field Greater Than 1023 Characters?

Dec 17, 2001

is there any way i can make a field in a table accomodate more than 1023 charcters? i used the 'varchar' datatype and used a length of 2500, but still, I can't fill up a field with more than 1023 characters. Is there any way to change it?
Also, is there any way to used a symbol or special character in a field? Can SQL server identify such a character? like the alpha or beta symbol...

Thank you...

View 1 Replies View Related

Integration Services :: Error While Changing Field Size

Sep 10, 2015

I am loading from SQL Server 2008 to Access 2010 using SSIS. One of the columns in the table I am loading into is a Number datatype and Fieldsize is long integer. The values are being truncated, so I want to change the Fieldsize to DOUBLE.  However, when I do that I receive the error below. What should I do? I would like not to change my Windows registry.

This error can be caused by one of the following:

The maximum number of columns allowed in a table or the maximum number of locks for a single file is exceeded.

The indexed property of a field is changed from Yes (Duplicates OK) to Yes (No Duplicates) when duplicate data exists in the table.

An expression is not specified in the Expression property of a calculated field. 

If the maximum number of locks per file was exceeded, you can increase the number by editing a registry entry. However, this is not a recommended option.

If you use Registry Editor incorrectly, you could cause serious problems that require you to reinstall the operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.

Make a backup of the registry. Find the MaxLocksPerFile registry value by using the Windows Registry Editor, and then increase the value. The MaxLocksPerFile value is saved as part of the following key:

HKEY_LOCAL_MACHINESOFTWAREMicrosoftOffice14.0Access Connectivity EngineEnginesACE

If the Indexed property of a field and duplicate data is located in the table, reset the Indexed property to the previous setting, or remove duplicate records from the table.

While I was loading to the same table a few days ago, I received a warning and the task took approx 9 hours. I am attaching the screen shot.

View 8 Replies View Related

SQL Server 2008 :: Replication Error - Field Size Too Large

Feb 1, 2011

I've got two databases on the same server and replicate some tables from one database to another.The replication is configured so not to drop the table if it exists, but to delete the data based on the filter if one exists. There are two tables on the subscriber that have some extra columns.

I get "field size too large" error when trying to replicate them. Is there a workaround without having to make the publisher and the subscriber tables identical by schema?

View 5 Replies View Related

Limit On SSIS String Variable Size, Trying To Get Big Xml File Into Xml Data Field

Nov 28, 2007

I have a SSIS package that opens an xml file, puts the contents into a string, then runs a stored procedure that dumps it into an xml column in a table. One of the xml files is huge. Putting the data into a ssis string causes an error. The length of the string variable is 58,231,886. The file will only get bigger.

How else can I get this data into a SQL Server XML field.

View 1 Replies View Related

SQL 2005 Resize Initial Log Size: MODIFY FILE Failed. Specified Size Is Less Than Current Size.

Sep 4, 2007


I am trying to resize a database initial log file from 500M to 2M. I€™m using€?

ALTER DATABASE <DBNAME> MODIFY FILE ( NAME = <DBLOGFILENAME, SIZE = 2 ) "



And I'm getting "MODIFY FILE failed. Specified size is less than current size." I tried going into the database properties and setting the log file to 2M, but it doesn€™t keep the changes.



Any help with this process?

View 1 Replies View Related

MSDE Text Datatype - Unable To Store More Than 900 Characters. (msde + Visual Studio 2003)

Jun 6, 2005

Hello,

I'm not sure if it's the setup I did wrong, but I can't seem to get my
text datatype in my database to store more than 900 characters. 
I'm trying to setup a news database for my website, which will populate
the information into a datagrid.  To test, I manually added a news
item in the database through the visual studio 2003 gui.  I
immediately noticed a problem as the I was getting an error after a
long news item saying:

"The value you entered is not consistent with the data type or length of the column, or over grid buffer limit."

I couldn't find anthing to set the buffer limit and the datatype is
"text" filled with simple text in the column.  As a further test,
I
simply entered 12334567890123... up to 900 characters and still
recevied the error.

I would appreciate someone leading me in the right direction on this one.

Thanks a lot.

View 1 Replies View Related

How Do I Change The Name Of A Computer Running MSDE With Out Reinstalling MSDE

May 27, 2000

I am trying to change the computer name of a machine running MSDE but I get an error when SQL Server starts. With regular SQL when I change the name of a computer I re-run setup and setup fixes this problem. MSDE can only be installed from unattended mode so I can’t rerun setup and fix the problem.

My question is "How do I change the name of a computer running MSDE with out reinstalling MSDE"

View 1 Replies View Related

MSDE: Renaming Machine Without Reinstall Of MSDE

Mar 27, 2001

We currently have the problem, that all our machines are produced with the
same name and afterwards the name is changed. So we have the problem that
the checksum key for the MSDE isn't valid anymore. As MSDE can only be installed
from unattended mode so I can’t rerun setup and fix the problem. Does anyone
know a solution for this problem ?? A program recalculating the cheksum ??

regards,

Manfred

View 3 Replies View Related

MSDE Worth Using Or Should I Invest In MySQL? (was MSDE)

Mar 9, 2005

I'm not sure if this is the correct forum for this this question but I'll give it a shot.

The only db development that I have ever done is in MS Access. I have a project at work that is being accomplished in VB and I need a db engine to use as the back end. Visual studio came with a copy of MSDE. Is this tool worth using or should I invest in mySQL? Are there any advantages to using MSDE over mySQL?

View 4 Replies View Related

Sql 2005 Install Error. MODIFY FILE Failed. Specified Size Is Less Than Current Size.

Jun 15, 2006

I installed sql 2005 a while back. Then I recently found out my file system was fat32 (I don't understand why the hardware people did this...) and I had to convert to NTFS. Naturally the sql service no longer worked so I uninstalled inorder to reinstall now I can't reinstall it I keep getting this message



native_error=5039, msg=[Microsoft][SQL Native Client][SQL Server]MODIFY FILE failed. Specified size is less than current size.


I'll try to post the full log in a new post.



View 11 Replies View Related

SPROC Problem - String[1]: The Size Property Has An Invalid Size Of 0.

Mar 16, 2007

Hi folks,Can anyone enlighten me here? I'm trying to use a SPROC which, when supplied with an int, looks up the table and returns certain columns from it. I'm using a SqlCommand, here's my codebehind: ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ SqlCommand dataSource = new SqlCommand("retrieveData", new SqlConnection(dbConnString));        dataSource .CommandType = CommandType.StoredProcedure;        dataSource .Parameters.AddWithValue("id", poid);        dataSource .Parameters.AddWithValue("title", title).Direction = ParameterDirection.Output;        dataSource .Parameters.AddWithValue("creator", creator).Direction = ParameterDirection.Output;        dataSource .Parameters.AddWithValue("assignee", assignee).Direction = ParameterDirection.Output; etc, etc... And the SPROC:------------------------------------------------------------------------------------------------------------------set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGOALTER PROCEDURE [dbo].[retrieveData]    @id int,    @title varchar(50) OUTPUT,    @creator varchar(50) OUTPUT,    @assignee varchar(50) OUTPUT,    @contact varchar(50) OUTPUT,    @deliveryCost numeric(18,2) OUTPUT,    @totalCost numeric(18,2) OUTPUT,    @status tinyint OUTPUT,    @project smallint OUTPUT,    @supplier smallint OUTPUT,    @creationDateTime datetime OUTPUT,    @amendedDateTime datetime OUTPUT,    @locked bit OUTPUT        AS    /**SET NOCOUNT ON;    **/    SELECT    [title] AS [@title], [datetime] AS [@creationDateTime], [creator] AS [@creator], [assignee] as [@assignee],    [supplier] as [@supplier], [contact] AS [@contact], [delivery_cost] AS [@deliveryCost], [total_cost] AS [@totalCost],    [amended_timestamp] AS [@amendedDateTime], [locked] AS [@locked]    FROM purchase_orders    WHERE [id] = @id; ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------  The id being passed in is definately not null, and is set to a value of an item I know exists. The resulting error is:

Exception Details: System.InvalidOperationException: String[1]: the Size property has an invalid size of 0.Line 63: retrievePODetails.Connection.Open();Line 64: retrievePODetails.ExecuteNonQuery();[InvalidOperationException: String[1]: the Size property has an invalid size of 0.] System.Data.SqlClient.SqlParameter.Validate(Int32 index) +717091... ... Can anyone see anything I'm missing? Thanks,Ally   

View 1 Replies View Related

Error - Output Param - SP - Size Property Has An Invalid Size Of 0

Nov 14, 2007

Using C#, SQL Server 2005, ASP.NET 2, in a web app, I've tried removing the size from parameters of type NCHAR, NVARCHAR, and VARCHAR.  I'd rather just send a string and let the size of the parameter in the SP truncate any extra chars if need be. I began getting the error below, and eventually realized it happened only with output parameters, as in the code snippet below.String[3]: the Size property has an invalid size of 0.   par = new SqlParameter("@BusinessEntity", SqlDbType.NVarChar);  par.Direction = ParameterDirection.Output;  cmd.Parameters.Add(par);  cmd.ExecuteNonQuery();What's the logic behind this? Is there any way around it other than either finding out what the size should be, or assigning a size larger than would ever be needed? ThanksMike Thomas 

View 6 Replies View Related

Reduce The File Size Less Then Original Size In SQL 2000

Jul 25, 2007

I have one db test with one .mdf and .ldf file...mdf file size is 100mb and for some reson i removed all the tablesfrom that .mdf file and transfer it into new secondary file so all thetables moved into secondary file now i want to reduce the first .mdffile from 100 mb to 50mb is that possible,it's showing 90mb is free.Please reply

View 1 Replies View Related

Encrypted Data Size By Original Size, Algorithm ?

Jan 24, 2006

I want to know encrypted data's size for designing database field size.

For example, cardnumber varchar(20) Encrypted by Triple_DES and PassPhrase, How match size does need to encrypted data store field.

I think the size does not depend to PassPhrase char length.

Regards,
Yoshihiro Kawabata

View 3 Replies View Related

String[18]: The Size Property Has An Invalid Size Of 0

Dec 11, 2007

I am getting error to run stored procedure using executenonquery method. The Stored Procedure is having OUTPUT parameter.
ExecuteNonQuery statement is called using SqlHelper.
Error : String[18]: the Size property has an invalid size of 0

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved