MSDTC - The Transaction Manager Is Not Available
Dec 30, 2005
I am trying to do something simple to test TransactionOption. I have a ScriptTask (out of the box), which runs fine. To test TransactionOption, I set the Package Properties TransactionOption = Required. Straight away the package fails with the following message
Error: The SSIS Runtime has failed to start the distributed transaction due to error 0x8004D01B "The Transaction Manager is not available.". The DTC transaction failed to start. This could occur because the MSDTC Service is not running.
I am running this on my Laoptop, which has XP Pro with SP2.
I checked the services and MSDTC and it is running fine. I have checked the Event Viewer and saw the following messages... One is Information and the other is Error
Information (Disk - Event ID 2444)
----------------------------------------------
MSDTC started with the following settings:
Security Configuration (OFF = 0 and ON = 1):
Network Administration of Transactions = 0,
Network Clients = 0,
Inbound Distributed Transactions using Native MSDTC Protocol = 1,
Outbound Distributed Transactions using Native MSDTC Protocol = 1,
Transaction Internet Protocol (TIP) = 0,
XA Transactions = 0
Error (Devices - Event ID 4437)
------------------------------------------------
The account that the MS DTC service is running under is invalid. This can happen if the service account information has been changed using the Services snap-in in Microsoft Management Console (MMC). MS DTC service will continue to start. Please make sure that the MS DTC service account information is updated using the Component Services Explorer.
I have checked Component Services. All looks fine from what I can see.
Anyone else came across this?
Thanks
Sutha
View 10 Replies
ADVERTISEMENT
Nov 8, 2007
Hi All, I am using the CSLA framework for the data access with SQL Server 2005 and we are not using distributed transaction. When we are using this architecture for our local machine it is working fine and our DB is in local machine itself.
But I am getting the following error in our development server and our DB is in the Network. " DataPortal.Fetch failed
(DataPortal.Fetch failed (DataPortal.Fetch failed (Network access for
Distributed Transaction Manager (MSDTC) has been disabled. Please enable DTC for
network access in the security configuration for MSDTC using the Component
Services Administrative tool.))) ---> DataPortal_Fetch method call failed
---> DataPortal.Fetch failed (DataPortal.Fetch failed (Network access for
Distributed Transaction Manager (MSDT... Procedure Script call failed." Please help me out to get rid of it. Your help would be appreciated.
RegardsGomaz
View 1 Replies
View Related
Oct 1, 2007
Server 1: Win2003, Clustered Environment, SQL 2005sp2
Server 2: Win2003, no cluster, SQL 2000sp3a
Server 3 (aka, client): Win2003, using ODBC (sql native client) to connect to server 1
I'm attempting to run an SQR that connects to server 1, yet updates server 2. Right now, all I'm doing is the statement
delete from <server2>.<database>.dbo.table
and am getting the error (DUL41 is server 2):
SQR 5528) ODBC SQL dbexec: SQLExecute error 7412 in cursor 1:
[Microsoft][ODBC SQL Server Driver][SQL Server]OLE DB provider "SQLNCLI" for linked server "DUL41" returned message "No transaction is active.".
(SQR 5528) ODBC SQL dbexec: SQLExecute error 7391 in cursor 1:
[Microsoft][ODBC SQL Server Driver][SQL Server]The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "DUL41" was unable to begin a distributed transaction.
If I use query analyzer (or whatever we're calling it now) to connect to server 1 and run the statement, it works fine. But, SQR is connecting via ODBC (that's different) and also is SQR.
I'm also not 100% sure all of the new MSDTC aspects are configured correctly, but I've gone through the settings a few times. Right now, I pretty much have everything set about as open as possible (these are test servers on the same network) and am still getting the error.
Any help, or ideas I could try, would be great. Thanks.
View 8 Replies
View Related
Jul 20, 2005
SQL Server Enterprise Manager could not start the service 'MSDTC' on server'NTAS21'.1722 - (The RPC server is unavailable)I Setup A publication on a server called NTAS4D, then Pushed TheSubscription to another server called NTAS21. If I configure so that thechanges at the subscriber are not replicated to the publisher, all works ok,I make a change at the publisher, it is replicated to the subscriber.If I configure for updating at the subscriber, I am presented with a screenstating that the following services must be started for replication to work:SQL Server Agent on NTAS4D - RunningMSDTC on NTAS4D - RunningMSDTC on NTAS21 - UnknownWhen I complete the wizard, I receive the message listed above.The Servers are in two separate locations, each behind a NAT enabled routerusing the internet to transfer data between the publisher and subscriber.Any Suggestions will be greatly appreciated.ThanksSteve
View 1 Replies
View Related
Mar 12, 2007
In this article http://download.microsoft.com/download/f/1/0/f10c4f60-630e-4153-bd53-c3010e4c513b/ReadmeSQLEXP2005.htm , it explains that you must fully enable the security settings to allow use of transaction processing for a SqlExpress database. Is there a way to set these option in a setup? Or is there another way to use transaction processing without setting these options?
Thanks
Dave T
View 1 Replies
View Related
Aug 27, 2006
I get the following error in the SQL ErrorLog file and in the Event Viewer when using a J2EE web application deployed on BEA WLS 8.1sp5 using the Weblogic JDBC Type4 XA driver with MSSQL Server 2000 SP4
Enlist of MSDTC transaction failed: XACT_E_NOTRANSACTION.
View 2 Replies
View Related
May 3, 2006
I have a sql job which has to pull some data from a remote server. This job is running fine last few days and suddenly failing to execute with the following error. The same job is running fine in other servers.
Executed as user: NT AUTHORITYNETWORK SERVICE. The Microsoft Distributed Transaction Coordinator (MS DTC) has cancelled the distributed transaction. [SQLSTATE 42000] (Error 1206). The step failed.
Note: The steps I have already done :
1. Verified the MSDTC configurations and restarted the MS DTC
2. Restarted the Sql Server
3. Restarted the machine.
Any help will be highly appreciated.
View 5 Replies
View Related
Mar 13, 2008
Distributed transactions were happily running between our SQL servers and then we installed Windows 2003 Server SP2 and all of a sudden we got this nice error message when attempting a remote data update via linked servers. I couldn't even run "BEGIN DISTRIBUTED TRANSACTION" without getting the error message. The full error message is:
"Enlist operation failed: 0x8004d00e(XACT_E_NOTRANSACTION). SQL Server could not register with Microsoft Distributed Transaction Coordinator (MSDTC) as a resource manager for this transaction. The transaction may have been stopped by the client or the resource manager."
Apparently, SP2 disables network DTC access (how nice, I feel more secure knowing that my data can't be updated remotely anymore).
Solution:
From Control Panel | Add or Remove Programs | Add Remove Windows Components
Select "Application Server" and click the "Details" button
Check "Enable network DTC access" and click OK for however many prompts it takes to apply the changes.
****NOTE**** this change WILL SHUT DOWN SQL SERVER so plan accordingly (this would have been handy to know in advance since I ran it in the middle of the workday and everyone got disconnected).
Hope this helps!
View 2 Replies
View Related
Aug 23, 2005
I am having problems when I enable transactions on a container and run my SSIS package on a workstation (as opposed to running it directly on the SQL Server). I have created a simple package consisting of four tasks
View 9 Replies
View Related
Aug 3, 2007
Does anybody know what it means?
The context is: a package with a single Data Flow finishes with this error: [Connection manager "xxx"] Error: The connection manager failed to defect from the transaction.
All components inside the data flow reports a successfull green status, however the DataFlow Task remains yellow for a long time, when suddenly the package stops with the above message. Another information is that the table remains locked during package execution (a select on that table does not complete...). This is a serious issue, and I couldnt find any relevant information about that. Thanks in advance.
View 4 Replies
View Related
Aug 23, 2006
I'm trying to run an SSIS package. The package runs on an SQL 2005 server on Win2k3 server. The package tries to connect to another win2k3 server with sql 2000 to retrieve some data. However, I recieve the errormessage shown in the topic.
I found info about modifying the MSDTC security settings under "component services" and did so. I made sure everything was allowed. However, the result was the same. Does anyone have any other idéa about what could cause this problem?
PS. The package works fine if I set up both databases on the same physical machine...
Regards Andreas
View 3 Replies
View Related
Mar 4, 2008
Hi all,I am trying to setup a VB.Net development environment on my desktop for one of the application which was already in the production for couple of years (some unknown contractor(s) developed and maintained it so far). The application works fine on the web.Visual Studio 2005, .Net 2.0, SQL 2000, SQL Server 2005 were installed on my desktop. When I try to build the entire application/solution in the debug mode (i.e., with http://localhost/), build succeeds and I could get to the login.aspx. When I try to login, I am getting an error in the Visual Studio at the following code;connection = New SqlConnection(connectionString)
connection.Open()
saying "Communication with the underlying transaction manager has failed", "System.Transactions.TransactionManagerCommunicationException was unhandled by user code". And the web browser displays the following error "Error HRESULT E_FAIL has been returned from a call to a COM component". When I try to connect the SQL Server 2005 with the same ConnectionString attributes by going to Tools>Connect to Database, it works fine. But, through application connection.Open() giving above errors. I have set the MSDTC properties (i.e., under Component Services>MyComputer Properties>Security Configuration) as below:-Enabled Network DTC Access, Allow Remote Clients, Allow Remote Administration, Allow Inbound, Allow Outbound, No Authentication required - selected, Enabled XA Transactions...& DTC Logon Account is "NT AUTHORITYNetworkService".Please help.Thanks in advance,Chandra
View 3 Replies
View Related
May 31, 2008
Hi All
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
View 1 Replies
View Related
Feb 22, 2007
I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.
for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.
I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.
if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
and
Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.
Please help me it's very urgent.
View 3 Replies
View Related
Feb 6, 2007
I am getting this error :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!
View 1 Replies
View Related
Dec 22, 2006
i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.
Message is like this:
Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
View 8 Replies
View Related
Jan 8, 2008
Hi,
i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".
my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.
Thanks in advance.
View 2 Replies
View Related
Jul 28, 2000
Is it true that you only have one instance of MSDTC on an active/active Cluster SQL configuration?
All the installations I have seen so far will only allow the MSDTC resource to be under on resource group (usually one of the SQL groups...
Can you all that have worked with cluster respond.
View 2 Replies
View Related
Apr 21, 2004
Trying to locate information on MSDTC. Is this "needed" to run SQL Server? That is, if this part of the installation is deleted, will SQL Server still function? Also, does anyone know if this is a crucial tool needed by Veritas Volume Manager or Windows Disk Manager?
If anyone knows of a link to this information, I'd appreciate it. My searches come up with lots on information on MSDTC, but nothing that answers my specific questions.
Thanks for your time.
View 1 Replies
View Related
Mar 21, 2006
When i do a BEGIN TRAN to a SQL server sitting on Windows 2003 Server from a SQL Server Sitting on Windows 2000 Server,
the Transaction hangs and if I try o kill it the Transaction is in ROLLBACK State.
I tried setting the Properties for the MSDTC and restarted the Windows 2003 Server but in vain
It still hangs
Did any one come across this problem?
Thx
View 1 Replies
View Related
Oct 16, 2006
I keep getting this error on my application server...what does it mean?The description for Event ID ( 0 ) in Source ( ODBC ) cannot be found.The local computer may not have the necessary registry information ormessage DLL files to display messages from a remote computer. Thefollowing information is part of the event: Failed to enlist in DTC:SQL state 37000, native error 8501, error message [Microsoft][ODBC SQLServer Driver][SQL Server]MSDTC on server 'PROSQL' is unavailable..any help would be appreciated...thanks-Jim
View 1 Replies
View Related
Jul 20, 2005
I'm using msde. On the little icon in task tray, you have under currentservice, a choice of mssqlserver, and another choice is msdtc. What ismsdtc? And what is sqlserver agent?
View 1 Replies
View Related
Aug 20, 2007
The resource msdtc is down. Every time, it works pretty well , after we restart the servers(node1 and node2). But, about half a hour later, the problem is there. We reintalled msdtc. It didn't work out too. msdtc and sql server is on a cluster. Can anyone help me out?
View 1 Replies
View Related
Oct 6, 2006
Hi,
I am running SQl 7.0 (SP4) on Windows XP Professional (SP2). Whenever I try an insert/update type of activity, the System returns the following message :
Server: Msg 8501, Level 16, State 3, Line 2
MSDTC on server 'SERVER' is unavailable.
However, all the required services including MSDTC are running on the System.
Please help ASAP.
Thanks & Regards - Rajesh Pathak
View 3 Replies
View Related
Nov 3, 2006
I have a class that use a TransactionScope object for make make two operations into a database. The problem is that in a computer works well but in another I receive a error message: "MSDTC is not running in .SQLEXPRESS". I had watched the services in the computer and the "Microsoft Distributed Transaction Coordinator" is running.
Does somebody know what is happening?
Thankyou and sorry for my English.
View 2 Replies
View Related
Nov 4, 2003
I am selectively insert data from serverA databaseX to serverB databaseX.
(serverA is linked server on B.)
I could insert parent and child tables. But get error when insert to grand-child tables:
Server: Msg 8501, Level 16, State 3, Line1
MSDTC on server B is unavailable.
Don't think I need to turn on MSDTC on B. But I could copy and paste from source A server to target B server. Confusing on some table could insert while others with error....
thanks
-D
View 2 Replies
View Related
Dec 14, 2004
I have an ugent situation. Due to a failure we had to build a new db server for an application and this was done succuessfully. The application requires DTC and it was not intalled when we install SQL on the server.
How do I install DTC? Did I miss an obscure option during SQL install?
Sidney Ives
Database Administrator
Sentara Healthcare
View 2 Replies
View Related
Apr 12, 2004
Hi,
I recently moved & upgraded a database from 7.0 to 2000 that makes use of linked servers. After upgrading, a number of queries started failing with the error below. These linked servers with this problem either had a stopped MSDTC or were behind a firewall. I've read the articles on how to configure MSDTC to work through a firewall, but before I do this I'm wondering why this is even happening. There were no problems when the database was at SQL 7.0. Does anyone know why sql 2000 would need to use MSDTC, but SQL7.0 would not? I don't need to use a distributed transaction, so ideally I'd like to somehow tell SQL not to use MSDTC at all. Any ideas?
Thanks
Server: Msg 7391, Level 16, State 1, Line 1
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
View 2 Replies
View Related
Jul 20, 2005
The following code:DECLARE @tsql varchar(1000)CREATE TABLE #Test (...)SET @tsql = 'SELECT * FROM OPENQUERY(MyDataSource, ...)'INSERT INTO #Test EXEC(@tsql)generates the following error message at the insert statement:Server: Msg 8501, Level 16, State 3, Line 4MSDTC on server 'MyComputer' is unavailable.Why?Thanks,Tony PerovicCompumation, Inc.
View 2 Replies
View Related
May 4, 2007
I have a SSIS package in which there are lot of Sequence Containers. Each sequence container has two Execute Sql tasks which brings 2 values, and if the comparison of the value is true, it runs a data flow task. Comparison is done using Expression.
If any of the sequence container fails the comparison, I wanted whole package to rollback so I had to use Transactions. I set "Required Transaction" on the package and "Supports Transaction" on each Sequence Container and Tasks respectively.
Now that I am trying to run the package, it runs few sequence containers fine and on few it gives this error.
[Execute SQL Task] Error: Executing the query "SELECT ISNULL(MAX(ClaimBillTypeKey), -1) ClaimBillTypeKey FROM dbo.Dim_ClaimBillType" failed with the following error: "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Also, this is not consistent, one time one Seq. Cont will fail and next time it will run fine but something else will fail. What is going on????
View 2 Replies
View Related
Feb 3, 2008
Hi all,
I have set up two server and also created linked server between server1 to server2
I could select from there just fine but when i try to run tirgger on table server1 which updates in server2 it gives me error following:
OLE DB provider "SQLNCLI" for linked server "Server2" return message "No Transaction is active"
MSG 7391, level 16, state 2, Procedure servertrigger, line 34
the operation could not be performed because OLE DB provider "SQLNCLI" for linked sever "SErver2" was unbale to begin a distributed transaction.
I have configured on both server exactly same:
with all the option:
MSDTC > Security Configuration:
Network DTC Access > TRUE
Allow Remote Clients > TRUE
Allow Remote Administration > TRUE
Allow Inbound > TRUE
Allow Outbound > TRUE
Mutual Authentication Required > TRUE
Enable Transaction Internet Protocol (TIP) Transactions > TRUE
Enable XA Transactions > TRUE
Account: NT AuthorityNetworkService
on both server..
On server2 i tried remote proc trans to on and off but it did not help.
What am i missing please Help!!!!!!!
View 1 Replies
View Related
Mar 18, 2008
Hi,
We got this error frequently "
Commit of internal MSDTC transaction failed: Result Code = 0x8004d019
How to solve this issues.
Regards,
S.Balavenkatesh
View 1 Replies
View Related
Oct 19, 2006
Hi all
I got the error below after run the query:
INSERT TABLE1 -- ran at SERVER1
EXEC [SERVER2].DB2.dbo.spInformation
@VR_STARTSHIFT = '10/10/2006 06:00:00',
@VR_INCDATE = '10/10/2006 14:00:00',
@VR_STATION_ID = 221
Server: Msg 7391, Level 16, State 1, Line 1
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
Server1 has a linked server to Server2 (this linked server is working because i can run the SP without the insert).
The Server1 is under WIN2K Server and Sever2 is under WIN2003
The MSDTC is installed and is running in both servers.
How can I fix that?
Thanks in advance
Manuel Rodrigues
View 2 Replies
View Related
