MSMQ && Integration Services
Feb 6, 2006
I have a SSIS package in SQL Server 2005 that attempts to publish some data into a MSMQ Private queue located on another machine.
While I was creating the package the connection string was pointing to the local server something like: localhostprivate$csin
Now I'm trying to get to the remote machine but I'm not sure what type of connection string I need to enter:
I tried: mw59private$csin where mw59 is the name of the remote machine I need to publish to but that result into a "Invalid Queue Path Name."
I tried: formatname:DIRECT=OS:mw59private$csin but that results in "The specified format name does not support the requested operation...."
Any idea?
Thanks,
Thierry
View 4 Replies
ADVERTISEMENT
Sep 11, 2007
Hello friends.
I managed to design an Integration service package,but the desired level of performance has not been achieved(i.e it is performing slow).
So I want to know what are the best practices for optimized solution .
In my package I'm exreacting data from XML file and Storing it in SQL server database with some processing dring data flow.
I'm using
1) Two Script Task Control -In these control,I m opening the connection to XML file through VB.net code and
iterating each record at a time.
2)Two OLE DB Command -Each fetched record from script task component is processed in OLEDB command through
stored procedure and then inseted into database.
3)One for Loop -This loop contains two script Task control and two OLEDB Command control,
(mentioned above),for fetching single record and inserting it in database.
4)One derived Column
5)One Multicast
6)One Character Map
7)One OlEDB Source
As with my current performance I'm able to insert one record in every .5 second (Which is much below to acceptable limits)
Is control lying disabled on SSIS designer pane also affect the performance of execution.
View 4 Replies
View Related
Mar 23, 2007
Hi,
I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services.
In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found"
Does anyone have any ideas?
Thanks
View 5 Replies
View Related
Oct 11, 2007
Hello, I have a problem when trying to fully process an SSAS database using Integration Services "Analysis Services Processing Task" task. I have 2 of these tasks which are responsible for processing the Dimensions then the Cubes. When I run the package either via the BIDS environment or on the local server from the Integration Services engine, I will get an error after about 20 minutes stating:
"Error: Memory Error: Allocation failure. Not enough storage is available to process this command""Error: Errors in the metadata manager. An error occurred when loading the <cube name> cube from the file \?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataMyWarehouse<cube file>.xml"
The cube name is not specific, it will fail and any of my cubes could be in the error log
If I fully process the AS database using the AS engine (logon to local AS server, right-click AS database and click Process), I get no errors at all, it processes and completes fine. The processing options are identical when I run in AS or via the SSIS "Analysis Services Processing Task" task.
I've searched quite a lot online but no joy, the information I have gleaned from various sites does not directly link SSIS with SSAS processing problems.
When either the AS processing starts via SSAS or SSIS the memory usage of MSMDSRV.exe increases to around 1.4 / 1.5 GB but never goes to 2GB ever, even when the error appears.
I've done the following with no effect.
" Have run via AS and works fine
" No specific cube it fails on
" Have created a Dimension only package, same problem
" Changed the maxmemorylimit
" Changed the connections to localhost
" Memory DOES NOT max out on server
Server Specs:
Windows Server 2003 Standard + Service Pack 2
4GM ram, 2GB paging file
SQL Server 2005 + Service Pack 2
Can anyone help?
Andy
View 2 Replies
View Related
Nov 28, 2006
Does anyone know or have any idea what's the use of msmq or how can this apply in ssis.
Thanks
View 5 Replies
View Related
Jun 27, 2007
I've an asp.net application that generates tons of messages (a few hundreds/Second, depending on load of requests). Basically, I need to consume those messages (doesn't have to call "message" even) into sql server table. Each message being a new row in a table.
I tried a few things but failed to satisfy the performance. I tried to put the messages in MSMQ and then have either the MSMQ trigger to process the message or Windows C# service to process message. The performance is horrible.
I'm thinking to send messages directly to SSBQueue and have sql server process it. Is there any async way of doing this so the performance would not be a problem? Anyway I can use WCF + SSB to solve this problem?
Can anybody suggest better approach? Buying a decent hardware or SQL Server 2005 is not a problem.
Rushi, if you are reading this post, sorry for the repeatation, I know I emailed you a few hours ago...
Thanks.
View 4 Replies
View Related
Feb 15, 1999
Does MSMQ 1.0 work with SQL 7?
MSMQ requires SQL Server. It works with SQL 6.5.
View 1 Replies
View Related
Aug 23, 2006
I'm in the process of doing the initial research for the architecture of a large scale, transactional messages routing platform.
My initial
design called for a series of MSMQ queues and Windows Services, written
in C#, to process the messages in these queues. There will be incoming
and outgoing queues, queues to store unroutable messages, etc.
My
application will be routing many hundreds of thousands (and eventually
millions) of messages per day. These message are very small (< 200
bytes each) and must be routed very quickly. (<1 second processing overhead per message for high priority messages.)
Using the term
"routing" may be a bit misleading. The messages arrive via TCP socket
connections. I will just need to take in a message, examine its
intended destination, and send it to one of several outgoing socket
connections, likely on different machines. Some messages require higher priority routing than others,
but I don't need multi-hop routing or anything like that.
Of
great concern to me is that there are absolutely no single points of
failure in the system. Because of this I was considering using a combination of MSMQ and Windows Services in a Clustered environment.
Can the Service Broker provide me with this kind of functionality? If so, how well does it perform and scale? Is it a better choice for messaging applications that require high transactional throughput than MSMQ?
I'm just trying to get an idea of what products/services I should look into further.
View 15 Replies
View Related
Jul 3, 2006
Doe's anyone have a good article on it ?
Thanks
Avi
View 1 Replies
View Related
Feb 6, 2008
I've been trying different things to "READ" the recordset from the "Message Queue". I can read it but with some weird characters. I've tried
ActiveXMessageFormatter
BinaryMessageFormatter
XMLMessageFormatter
So, far I have no luck.
MessageQueue msgQ3 = new MessageQueue("SERVERNM\" + msg.Label, false);
Message msg3 = new Message();
msg3.Formatter = new ActiveXMessageFormatter();
msg3 = msgQ3.Receive(new TimeSpan(0, 0, 30));
byte[] b = new byte[msg3.BodyStream.Length];
msg3.BodyStream.Read(b, 0, (int)msg3.BodyStream.Length); System.Text.ASCIIEncoding enc = new System.Text.ASCIIEncoding();
returnVal = enc.GetString(b);
RESULTS:
I try to convert it to String and then deserialize later but I'm getting some junk.
<?xml version="1.0" encoding="utf-8" ?>
<string xmlns="http://tempuri.org/">5??m.????????#?_?XTG!???????#?_?Xg??c??????? ?<???m????_?X |?"???????Dw=?????"I?<???m????_?X21? Reply_Code?$??5? MultiEntries?$??7?dName?.$??3? Page_Number?$??1? Number? $??3? Status_Code?$??/?_Name?.$??5? _Address?+$??/? B_City?$$??1? _State?$??-? _Zip? $??A? Bank_Telephone_Num?"$?? ??11 033000333YHONDA2nd street xavier VA 326200000(555) 555-5500</string>
View 1 Replies
View Related
Nov 28, 2007
Does anyone have any ideas or sample code for firing a stored procedure using an MSMQ message?
I have to assume XML is in there somewhere.
(ie. create XML formatted message with proc call as element?)
Just getting started on project, any help appreciated.
www.beyonder422.com
View 4 Replies
View Related
Jan 2, 2008
Hi,
I want to Export a List of the Public Queues using the command prompt. Can this be done. I don't want to always click the Export List button. I eventually want to automate the Export List so I can create an Environment HealthCheck.
Thanks
View 1 Replies
View Related
Jan 12, 2004
Used to work fine:
(windows 200 server, sql server 2000, JDBC driver SP2.)
Two java processes, one sending messages (using jdbc and sql as temp storage), second is receiving and placing on msmq.
After installing SP3a for SQL server, under high load (200 a sec) there are missing messages in msmq.
Installed everything from scratch on separate machine, works fine until SP3a is applied.
Any help is highly appreciated
View 3 Replies
View Related
Apr 13, 2006
Firstly the disclaimer: im a total SSIS bunny.
Ok, with that out of the way...
What i want to do is have data read from an MSMQ message (which will be a simple XML message) and have it transformed and inserted into a simple table. Sound simple, but i cant work out how to do it.
I started a new Integration Services Project and dropped a Data Flow task on the Control flow tab, then double-click it to go to the data flow tab. I have added a MSMQ connection manager which points at my private queue and i can hit the test button and it sees it tests ok. How do i wire that into my data flow?
On my dataflow tab i have a SQL Server Destination (set to the local SQl server instance) and ive been trying a DataReader source and try setting the Advanced Editor "Connection Manager" column on IDBConnection row to point to my MSMQ connection manager. I get some error "cannot aquire a managed connection from the run-time connection manager". How do i get a Data Flow source which reads the XML message off my MSMQ connection manager??
On the Control Flow tab you can add a Message Queue Task and i can bind it to my MSMQ connection manager and set it up as a recieve task etc, but how do i use that?
Help!
View 3 Replies
View Related
Nov 30, 2007
Hello,
I'm working on the design of a system that will have two queues. The first queue will take requests to do something. The second queue will hold the results of having done something. Both queues won't necessarily be on the same physical server. Clients reading/writing to the queue will not be using SQL server. Web service/WCF interfaces will be developed to interrogate/manipulate queues.
My question is: which is better - MSMQ or Service Broker; if I want reliable queues. I can affort to loose items off the first queue, but cannot afford to loose any result data on the second queue.
Can anyone make any recommendations please?
Regards,
Jonathan.
View 3 Replies
View Related
Feb 12, 2008
Hi All,
I'm a bit lost on this...
I have an SSIS package which writes to a configured public MSMQ. When run directly through Visual Studio, file system or msdb it works fine (I guess these use me as the user).
However, when I schedule it through an SQL Agent Job it fails with the following:
Failed to write message ... to the queue.
This seems like a permissions thing to me, but I've tried giving full control to everyone in the MSMQ permissions, also explicitly giving full control to the user that the agent job executes as. Neither made a difference.
Any help would be greatly appreciated.
Cheers,
Tony Vaughan.
View 2 Replies
View Related
Apr 18, 2007
Does anybody know of a notification services using SSIS? Is it SendMail or otherwise? Is there a step-by-step practice on how to create one?
View 19 Replies
View Related
May 24, 2007
Is there a way to give customers access to SSIS? They need to be able to create their own SSIS packages. Of course we have more then one customer so it would be nice to have modular security in place where they don't get to see customers abc and customer xyz packages. Only their own.
thanks!
View 6 Replies
View Related
May 8, 2008
Hi All,
I have created an integration services project (attached is a screenshot) that workes against the flat file (.DAT extension) and it does some manipluation in the data and then load it into the table. Everything works fine.
Now I want to get the name of my flat file source fille (which is a .DAT file) and then insert it in the table.
I am running th integration services against different .DAT files (only one file at one time) which are located on different locations.....so what I want is that, whenever I run the package it do the usuall processing and then while loading the data in to the destination table, it also load the name of the file into the destination table (lets called a field "FileName" of nvarchar type in the table "Comphistory")
How can I achieve this?
I am looking for a quick and easy help.
Thanks,
Zee
View 4 Replies
View Related
Jul 25, 2007
Problem
When you have a SSIS package that contains a connection from a data source, this connection is not updated when the data source changes based on a configuration change.
Situation :
A SSIS solution contains 3 configurations : Development, Test, Production. You can create those configurations in configuration manager of the solution.
The SSIS project contains one Data source. It doesn't really matter what type but I take SQL Server. The database server in development is SQL_DEV, in test is SQL_TEST and in production is SQL_PROD. Initially they are for all configurations the same. You can specify those values by changing the active configuration and then editing the Data source.
In the SSIS package (DTSX), you can create a connection manager based on a Data source.
If you change the Data source, the connection manager is also changed. If you change the Data source by changing the active configuration, the connection manager is not being updated.
If you think this isn't a big issue think big. We have 4 configuration, 10 shared Data sources and 25 DTSX packages. That would give a maximum of 1000 settings (4 x 10 x 25). Using this method it can be reduced to 40 (4 x 10). Of course this is a theoretical but it is very common to have the destination data source re-used on all packages, which still would be 100 settings (4 x 25)
Steps to reproduce
- create a new SSIS project
- In the solution explorer, create a new Data source named TestSource.
- In the connection managers window of Package.dtsx, create a new connection from a Data source.
- Make some changes in to TestSource.ds under the Data Sources. For example change the server or the database.
- Verify that those changes are also in the package.
- in the solution explorer, right click the solution and select configuration manager
- under active solution configuration, create a new configuration named test.
- Set the copy settings from : development
- Verify that Create new project configuration is checked.
- click OK and close.
- Notice that the active configuration is now Test
- Make some changes the Testsource.ds like a different server.
- Verify that those changes are also in the package.
- Make the development configuration as active.
- Notice that the Testsource.ds contains now the original settings.
- You will notice that the connection manager still contains the "test" settings and not the development settings.
- If you create a deployment utility it will still contains the wrong values.
with regards,
Constantijn Enders
View 1 Replies
View Related
Jun 16, 2006
Hi all,
Can someone explain to me why I am getting this kind of error though I am able to integrate all the data succeesfully to the next destination.
Ronald
SSIS package "Prescription.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0202009 at Data Flow Task, SQL Server Destination [521]: An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 58, column 1. The destination column (PatientId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 27, column 12. The destination column (ServiceId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 26, column 12. The destination column (ServiceId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 25, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 24, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 23, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 22, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 21, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 20, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
View 3 Replies
View Related
Apr 25, 2006
Hi,
is Integration Services included in SQL Server Express?
In what version/module?
Thanks
just Do It
View 1 Replies
View Related
Jun 16, 2006
Hi all,
Can someone explain to me why I am getting this kind of error though I am able to integrate all the data succeesfully to the next destination.
I am trying to get the Prescription table from Access to SQL SERVER 2005 database
Ronald
SSIS package "Prescription.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0202009 at Data Flow Task, SQL Server Destination [521]: An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 58, column 1. The destination column (PatientId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 27, column 12. The destination column (ServiceId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 26, column 12. The destination column (ServiceId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 25, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 24, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 23, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 22, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 21, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 20, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
View 1 Replies
View Related
Jun 20, 2006
I'm trying to use the new integration services and have found all kinds of help for it, but where is it? I can't find it. Is it in the SQL Server Management Studio?
View 1 Replies
View Related
Jul 25, 2007
Hi,
I want to insert datas from a txt-file into a sql-table.
Therefor i would use a xml-file for the structure!
How can i refer this xml-file to a measurement insertion task?
Tanks for your help and sorry for my bad english :rolleyes:
View 1 Replies
View Related
Jul 23, 2005
I am trying to know how to read many XML files within one data flowtask. I have many many files that I would like to apply to with thesame data flow so I need to know how to read them in and what taskshould I use under SQL 2005 DTS/Integration services.Thanks for your help!JON
View 1 Replies
View Related
Jan 14, 2008
Good morning,
I've to do a mining project and I intend to use the SSIS.
I've done a clustering plugin last year on analysis services and I also want to use it.
Let me try to explain the architecture of the process:
1) Receive data (read data from the database - these data are texts, actually)
2) Pre-process the data (transform the texts in a sparse matrix) using a new plugin
3) Call my clustering plugin and assign it to read the table created on the previous step
4) Call my KNN plugin to classify other pre-processed texts using the clusters found on the previous step as classes.
5) Show results.
Alright... It all running as a workflow on integration services
Here are my doubts:
A) How to view and use my plugin made for Analysis Services on Integration Services ? (is it possible or will I have to create another plugins from zero just to run on Integration Services ?)
B) Assuming the previous step is possible, how to modify my plugins to define inputs and outputs to do the correct communications between each plugin ? I think this is the most important question. Is it simple to do ? Is there any documented examples ?
Thanks a lot for your attention once more,
-Renan Souza
View 1 Replies
View Related
Apr 24, 2007
is it possible to use integration services to extract data from essbase?
View 3 Replies
View Related
Apr 5, 2007
Don't know what's the problem while installing SP 1 it just kills the Integration Services. Did any one had this issue?
Thank you - Ashok
View 6 Replies
View Related
Nov 16, 2006
When i try to connect to SQL 2005 integration services from object explorer i get connected (in the sense it shows in object explorer running packages stored packages ..)but when i try to exand any of these objects i get the following error
--------------------------------------------------------------------------------------------------
Failed to retrieve data for this request(Microsoft.sqlserver.smoEnum)
Additional information
The sql server specified in SSIS service configuration is not present or not available.This might occur when there is no default instance of Sql server on the computer. For more information see "config integeration services" in server 2005 books online.
Login time out expired
An error has occured while establishing a connection to the server.When connecting to the Sql server 2005, the failure may be caused by the fact that under default settings Sqlserver does not allow remote connections.
Names Pipes Provider: could not open a connection to Sql Server[2].(MsDtsSrvr)
----------------------------------------------------------------------------------------------------------
i have chkd remote connection settings and other settings but cant find a way out.
kindly provide some help
Thanks in advance
View 4 Replies
View Related
Sep 26, 2007
Hi
We have developed a datawarehouse using DTS in 2000. Now we have started using 2005 and as it supports DTS so there no issued for our datawarehouse to run.
But every six months there are new requirements and we achange and add to the existing DTS, but now DTS development is not supported in 2005, can we use itegration services for the same and embedd it with the existing DTS or do I need to redevelop the datawarehouse using SSIS.
View 1 Replies
View Related
Jul 12, 2007
We use Windows Authentication to connect to SQL Server, is there any special permissions required to connect to Integration Services in SSMS?
Whenever I try to browse the servers available with Integration Services (from Object Browser), none of the servers gets listed. If I directly give server name and try to connect to Integeration Services I get the following error. But I'm able to connect to the database engine.
TITLE: Connect to Server
------------------------------
Cannot connect to <servername>.
------------------------------
ADDITIONAL INFORMATION:
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Connect to SSIS Service on machine "<servername>" failed:
Access is denied.
------------------------------
Connect to SSIS Service on machine "<servername>" failed:
Access is denied.
Thanks
View 5 Replies
View Related
