MSOLAP_NODE_SCORE Values Returned By Store Proc DTGetNodeGraph
Oct 19, 2006
Hello--
For extracting the link structure of a dependency network with a large number of nodes (for problems having a large number of variables), we have been using the stored procedure:
System.Microsoft.AnalysisServices.System.DataMining.DecisionTreesDepNet.DTGetNodeGraph('{model-name}', value)
The stored procedure returns a resultset with columns: [Node_type], [Node_unique_name_1], [Node_unique_name_2], and [MSOLAP_NODE_SCORE]
Are there any pointers, references or descriptions of the values of [MSOLAP_NODE_SCORE]?
Thanks,
- Paul
View 5 Replies
ADVERTISEMENT
Feb 23, 2007
I have a DTSX package which reads values from a fixed-length text file using a data reader and writes some of the column values from the file to an Oracle table. We have used this DTSX several times without incident but recently the process started inserting NULL values for some of the columns when there was a valid value in the source file. If we extract some of the rows from the source file into a smaller file (i.e 10 rows which incorrectly returned NULLs) and run them through the same package they write the correct values to the table, but running the complete file again results in the NULL values error. As well, if we rerun the same file multiple times the incidence of NULL values varies slightly and does not always seem to impact the same rows. I tried outputting data to a log file to see if I can determine what happens and no error messages are returned but it seems to be the case that the NULL values occur after pulling in the data via a Data Reader. Has anyone seen anything like this before or does anyone have a suggestion on how to try and get some additional debugging information around this error?
View 12 Replies
View Related
May 9, 2008
I have a stored procedure that is going to be called from my ssis job. I create a package and it as an 'Execute SQL Task' within it. My stored procedure will return a 1 or 0. If 1 is returned then the package needs to continue processing. If
0 is returned then the job stops running.
How can I get the value that is being returned from the stored procedure and either continue or stop the job depending on what is returned?
View 19 Replies
View Related
Mar 12, 2007
my store proceedure gets the id:
CREATE PROCEDURE createpost( @userID integer, @categoryID integer, @title varchar(100), @newsdate datetime, @story varchar(250), @wordcount int) asDECLARE @newNewsID integer
Insert Into TB_News(UserID, CategoryID, title, newsdate, StoryText, wordcount)Values (@userID, @categoryID, @title, @newsdate, @story, @wordcount)
SELECT @newNewsID = @@IDENTITY
then im calling it in the asp:
con = new SqlConnection ("server=declt; uid=c1400046; pwd=c1400046; database=c1400046"); con.Open(); cmdselect = new SqlCommand("createpost", con); cmdselect.CommandType = CommandType.StoredProcedure;
cmdselect.Parameters.Add("@userID", userID); cmdselect.Parameters.Add("@categoryID", categoryID ); cmdselect.Parameters.Add("@title", title.Text ); cmdselect.Parameters.Add("@newsdate", newsdate.Text ); cmdselect.Parameters.Add("@story", story.Text ); cmdselect.Parameters.Add("@wordcount", "1" ); int valueinserted = cmdselect.ExecuteNonQuery(); Response.Redirect("http://declt/websites/c1400046/newpicture.aspx?id="+valueinserted); con.Close();
as you can see im using the valueinserted but thats just returning 1, but im guessing that means it sucessful. but i want the id of the new record! any idea how ?
View 2 Replies
View Related
Feb 26, 2006
I have a stored proc with a query which checks whether an identical
value is already in the database table. If so, it returns a value of 1.
How do I caputure this value in an asp.net page in order to display a
message accordingly? (using ASP.NET 1.1)
Currently my stored proc looks something like this (snippet only):
If Exists(
SELECT mydoc WHERE....
)
Return 1
Else
...INSERT INTO.... code here.
View 2 Replies
View Related
Mar 28, 2007
i think mSOLAP_NODE_SCORE that is importance, and with mSOLAP_NODE_SCORE so high we have good rule,
is it ok?
and if mSOLAP_NODE_SCORE <0 what is it mean?
can you tell me about mSOLAP_NODE_SCORE with rules data
thanks
View 5 Replies
View Related
Jul 17, 2006
Hi,
Can we validate the returned order of fields from a stored procedure? Infact, i am taking a query as user input and extracts the results based on the query but for that order of fields specified in a query is important.
Can i check the order after the query is run i.e if this is entered "select field1,field2,field3 from table" then i need to check the order of the resultset generated. I can't check the query before the resultset is generated because a user can enter bunch of queries.
Any way will work, tsql or .net app.
Thanks,
View 3 Replies
View Related
Apr 16, 2007
Hi,
Summary: When my stored procedure uses temporary tables then the TableAdapter won't be able to work out the field names and so won't work. I get an error in the TableAdapter configure wizard saying: Invalid object name '#TempTable'.
I'm not doing anything unusual so this must be a common problem. Let me explain:
I'm using Visual Studio 2005 and SQL Server 2000.
Detail: I've written a new stored procedure (SP) that uses a temporary table in calculating the resulting results set (several fields with several rows). I recon the temporary table bit is significant.
I've created a new DataSet in VS2005 and dragged the stored proc onto the DataSet design surface.
I right click on the TableAdapter and enter the 'configure'. The problem is that the wizard doesn't think any fields are being returned by the SP.
If I try and do it another way I get the same problem: Right click on DataSet and add new TableAdapter (same thing happens, it won't recognise that there are fields being returned from the SP).
FYI: If I do it for an SP that doesn't use any temporary tables it all works like a dream (problem is that I need to use temporary tables as its complex ).
Thanks for any advise
View 7 Replies
View Related
Oct 2, 2007
I need to call the stored procedure below. Basically what I need to know is if the query returns a record?
Note I would be happy if I could just return the number Zero if no records are returned. Can someone please help me out here?Here is my query so far in SQL Server. I just don't know how to return a value based upon the result of the records returned from the query.
GOCREATE PROCEDURE [dbo].[GetNameStatus]( @CountryId decimal, @NameId decimal, @DescriptionId decimal)AS SELECT Name.Active FROM Name INNER JOIN NameDescription ON Name.NameId = NameDescription.NameId WHERE Name.CountryId=@CountryId AND Name.NameId=@NameId AND NameDescription.DescriptionId=@DescriptionId AND Name.Active='Y'
View 3 Replies
View Related
Feb 5, 2008
I have a stored procedure that returns a resultset AND an output parameter, pseudocode:myspGetPoll@pollID int,@totalvoters int outputselect questionID,question from [myPoll] where pollID=@pollID @totalvoters=(select count(usercode) from [myPoll] where pollID=@pollID)1. In my code behind I'd like to read both the rows (questionID and question) as well as total results (totalvoters) How could I do so?2. what would be the signature of my function so that I can retreive BOTH a resultset AND a single value?e.g.: private function getPollResults(byval pollID as integer, byref totalvoters as integer) as datasetwhile reader.read dataset.addrow <read from result>end whiletotalvoters=<read from result>end functionThanks!
View 2 Replies
View Related
May 4, 2007
I need some help writing my request, I tried both of the following but it does'st seem to work. Your sugestion would be appreciated.SELECT count(LeadId) FROM dbo.Cl_Leads Where AccntMng=@AccntMng and (Status = 'Won' or Status = 'Lost') and InsertDate BETWEEN @dtStart AND @dtEnd
I also tried
SELECT count(LeadId) FROM (SELECT * FROM dbo.Cl_Leads WHERE InsertDate BETWEEN @dtStart AND @dtEnd)Where AccntMng=@AccntMng and (Status = 'Won' or Status = 'Lost') This return and error: Incorrect syntax near the keyword 'Where'.
View 6 Replies
View Related
Jan 7, 2005
I am doing an insert and I get the error "Cast from type 'DBNull' to type 'Integer' is not valid." if the contact name already exist.
I dont see my error so if someone could enlight me I would appreciate.
Thanks
"****************STORE PROC***********************
ALTER procedure dbo.Add_Cl_Contact
(
@ContactNamenvarchar(75),
@Departmentnvarchar (50)=null,
@Titlenvarchar(50)=null,
@Phone1char(20)=null,
@Phone2char(20)=null,
@Phone3char(20)=null,
@Ext1char(10)=null,
@Ext2char(10)=null,
@Ext3char(10)=null,
@Faxnvarchar(50)=null,
@Emailnvarchar(50)=null,
@ContactTypeIDint=null,
@Resultinteger OUTPUT
AS
if Exists
(
Select *
From Cl_Contacts
Where ContactName = @ContactName
)
Return 1
Else
insert into Cl_Contacts (
ContactName,
Department,
Title,
Phone1,
Phone2,
Phone3,
Ext1,
Ext2,
Ext3,
Fax,
ContactTypeID,
Email
)
values (
@ContactName,
@Department,
@Title,
@Phone1,
@Phone2,
@Phone3,
@Ext1,
@Ext2,
@Ext3,
@Fax,
@ContactTypeID,
@Email
)
Select @Result = SCOPE_IDENTITY()
return 0
"****************END STORE PROC***********************
'******************************************************************
'******************************************************************
Public Function Add_Cl_Contact(ByVal strContactName As String, _
ByVal strDep As String, ByVal strEmail As String, ByVal strExt1 As String, ByVal strExt2 As String, _
ByVal strExt3 As String, ByVal strFax As String, ByVal strPhone1 As String, ByVal strPhone2 As String, _
ByVal strPhone3 As String, ByVal strTitle As String, ByVal iContactTypeId As Integer, _
ByRef iResult As Integer, ByRef strError As String) As Boolean
'******************************************************************
Dim bSuccess As Boolean = True
Dim connect As New SqlConnection(strConnection)
Dim cmdSelect As New SqlCommand("Add_Cl_Contact", connect)
Dim paramReturnValue As SqlParameter
cmdSelect.CommandType = CommandType.StoredProcedure
'PARAM
cmdSelect.Parameters.Add("@ContactName", strContactName)
cmdSelect.Parameters.Add("@Department", strDep)
cmdSelect.Parameters.Add("@Title", strTitle)
cmdSelect.Parameters.Add("@Phone1", strPhone1)
cmdSelect.Parameters.Add("@Phone2", strPhone2)
cmdSelect.Parameters.Add("@Phone3", strPhone3)
cmdSelect.Parameters.Add("@Ext1", strExt1)
cmdSelect.Parameters.Add("@Ext2", strExt2)
cmdSelect.Parameters.Add("@Ext3", strExt3)
cmdSelect.Parameters.Add("@Fax", strFax)
cmdSelect.Parameters.Add("@Email", strEmail)
cmdSelect.Parameters.Add("@ContactTypeID", iContactTypeId)
paramReturnValue = cmdSelect.Parameters.Add("@Result", SqlDbType.Int)
paramReturnValue.Direction = ParameterDirection.Output
paramReturnValue = cmdSelect.Parameters.Add("ReturnValue", SqlDbType.Int)
paramReturnValue.Direction = ParameterDirection.ReturnValue
Try
connect.Open()
cmdSelect.ExecuteNonQuery()
iResult = cmdSelect.Parameters("@Result").Value
connect.Close()
If cmdSelect.Parameters("ReturnValue").Value = 0 Then
strError = "Contact has been added"
Else
strError = strContactName & " already exist!"
bSuccess = False
End If
Catch ex As Exception
bSuccess = False
strError = ex.Message
Finally
If connect.State = ConnectionState.Open Then
connect.Close()
End If
End Try
Return bSuccess
End Function
View 3 Replies
View Related
Jun 29, 2005
For a reason that I dont see my store proc is always
returning 0 records but if I use a commandType.text instead of
StoredProcedure then I get my results. So I must have some kind
of error somewhere.
Store Proc
ALTER PROCEDURE dbo.Get_Cl_IssuesBySystemID
@SystemId nvarchar(255)
AS
SET NOCOUNT ON
SELECT t1.issueId, t1.IssueTitle,t1.DateCreated,t2.CustomFieldValue
FROM dbo.IssueTracker_Issues t1
LEFT OUTER JOIN dbo.IssueTracker_ProjectCustomFieldValues t2
ON t1.IssueId = t2.IssueId
Where t2.CustomFieldId=5 and t2.CustomFieldValue like '%@SystemId%'
order by t1.DateCreated
SET NOCOUNT OFF
Function
Public Function Get_Cl_IssuesBySystemID(ByVal strSystemId As String) As DataView
Dim objDs As New DataSet
Dim objDv As New DataView
Dim connect As New SqlConnection(strConnection)
'***For CommanType.Text***
Dim strSelect As String
strSelect = "SELECT t1.issueId, t1.IssueTitle,t1.DateCreated,t2.CustomFieldValue" & _
" FROM dbo.IssueTracker_Issues t1" & _
" LEFT OUTER JOIN dbo.IssueTracker_ProjectCustomFieldValues t2" & _
" ON t1.IssueId = t2.IssueId" & _
" Where t2.CustomFieldId=5 and t2.CustomFieldValue like '%" &
strSystemId & "%'" & _
" order by t1.DateCreated"
Dim cmdSelect As New SqlCommand(strSelect, connect)
cmdSelect.CommandType = CommandType.Text
'***End For CommanType.Text***
'***For CommanType.StoredProcedure***
'Dim cmdSelect As New SqlCommand("Get_Cl_IssuesBySystemID", connect)
'cmdSelect.CommandType = CommandType.StoredProcedure
'PARAM
'cmdSelect.Parameters.Add("@SystemId", strSystemId)
'***End For CommanType.StoredProcedure***
Dim objAdapter As New SqlDataAdapter(cmdSelect)
Try
objAdapter.Fill(objDs)
objDv = objDs.Tables(0).DefaultView
Catch objErr As Exception
Throw New Exception(objErr.Message)
End Try
Return objDv
End Function
View 2 Replies
View Related
May 21, 2008
the storeproc gives out put one data with one column as Day 25 or 50 as a column in a table. if the condition
inside the storeproc matches otherwise the column it returns will not have any value i.e null..i am trying to run
this query to get some boolean output . Is it valid to run store proc in while exists case. here is the query
SELECT CASE
WHEN EXISTS (EXEC dbo.sp_CheckingLobValue
@varfilename = N'Customers.xml')
BEGIN
'YES'
ELSE
'NO'
END
can any one has any solution to it.
thanks in regards.
View 5 Replies
View Related
Aug 3, 2006
Can someone help me with debugging store proc. I am usig VS 2003 and SQL Server 2005 and I have no clue as how to do that if it is possible. I would like to place a break point in my store proc if that is possible. I know if I was in VS 2005 it would be a charm but it's not my case.
Thanks
View 3 Replies
View Related
Aug 9, 2004
I am trying to do an insert with a SPand I get the following error: "The name 'A2LA Website' is not permitted in this context. Only constants, expressions, or variables allowed here. Column names are not permitted."
When iParentID=30 and strTexte="A2LA Website"
What an I doing wrong?
Table:
ID int(identity)
ParentID int
Text nvarchar(50)
Valeur nvarchar(50) Allow Null
Ordre int Allow Nulls
Public Sub addItemToDdSelection(ByVal strTable As String, ByVal iParentID As Int16, ByVal strTexte As String)
Dim connect As New SqlConnection(strConnection)
Dim cmdSelect As New SqlCommand("AddDropDownContent", connect)
Dim paramReturnValue As SqlParameter
Dim strError As String
cmdSelect.CommandType = CommandType.StoredProcedure
'PARAM
cmdSelect.Parameters.Add("@intParentID", iParentID)
cmdSelect.Parameters.Add("@strTexte", strTexte)
Try
connect.Open()
cmdSelect.ExecuteNonQuery()
connect.Close()
Catch ex As Exception
strError = ex.Message
Finally
If connect.State = ConnectionState.Open Then
connect.Close()
End If
End Try
End Sub
ALTER PROCEDURE dbo.AddDropDownContent
(
@intParentID int,
@strTexte varchar(50)
)
AS
EXEC ('INSERT INTO DropDownMenus (ParentID, Texte) VALUES(' + @intParentID + ',"' + @strTexte + '")')
View 3 Replies
View Related
May 17, 2006
I have the following store proc and was wondering if I can optimized it by using a SELECT CASE instead of all those IF? I tried but don't know how to write it.
Thanks set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[Get_Cl_SearchMultiColumn]
(
@strSearchTermColumnNamenvarchar (50),
@strSearchTermSearchTermnvarchar (200)
)
as
if (@strSearchTermColumnName = 'Monitor')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,Monitor1,Monitor2
FROM Cl_Systems
WHERE contains(Monitor1,@strSearchTerm) or contains(Monitor2,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'MonitorSerial')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,Monitor1Serial,Monitor2Serial
FROM Cl_Systems
WHERE contains(Monitor1Serial,@strSearchTerm) or contains(Monitor2Serial,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'Microscope')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,Microscope1,Microscope2
FROM Cl_Systems
WHERE contains(Microscope1,@strSearchTerm) or contains(Microscope2,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'SerialMicroscope')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,SerialMicroscope1,SerialMicroscope2
FROM Cl_Systems
WHERE contains(SerialMicroscope1,@strSearchTerm) or contains(SerialMicroscope2,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'Controller')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,Controller1,Controller2
FROM Cl_Systems
WHERE contains(Controller1,@strSearchTerm) or contains(Controller2,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'ControllerFirmware')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,Cont1Firmware,Cont2Firmware
FROM Cl_Systems
WHERE contains(Cont1Firmware,@strSearchTerm) or contains(Cont2Firmware,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'SerialController')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,SerialController1,SerialController2
FROM Cl_Systems
WHERE contains(SerialController1,@strSearchTerm) or contains(SerialController2,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'Joystick')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,Joystick1,Joystick2
FROM Cl_Systems
WHERE contains(Joystick1,@strSearchTerm) or contains(Joystick2,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'JoystickFirmware')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,Joy1Firmware,Joy2Firmware
FROM Cl_Systems
WHERE contains(Joy1Firmware,@strSearchTerm) or contains(Joy2Firmware,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'SerialJoystick')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,SerialJoystick1,SerialJoystick2
FROM Cl_Systems
WHERE contains(SerialJoystick1,@strSearchTerm) or contains(SerialJoystick2,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'Camera')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,Camera1,Camera2,Camera3,Camera4
FROM Cl_Systems
WHERE contains(Camera1,@strSearchTerm) or contains(Camera2,@strSearchTerm) or contains(Camera3,@strSearchTerm) or contains(Camera4,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'CameraSerial')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,Camera1Serial,Camera2Serial,Camera3Serial,Camera4Serial
FROM Cl_Systems
WHERE contains(Camera1Serial,@strSearchTerm) or contains(Camera2Serial,@strSearchTerm) or contains(Camera3Serial,@strSearchTerm) or contains(Camera4Serial,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'ZMotor')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,ZMotor1,ZMotor2,ZMotor3
FROM Cl_Systems
WHERE contains(ZMotor1,@strSearchTerm) or contains(ZMotor2,@strSearchTerm) or contains(ZMotor3,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'Stage')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,Stage1,Stage2,Stage3
FROM Cl_Systems
WHERE contains(Stage1,@strSearchTerm) or contains(Stage2,@strSearchTerm) or contains(Stage3,@strSearchTerm)
return 0
end
if (@strSearchTermColumnName = 'Lens')
begin
SELECT CustomerID,SystemId,CompanyName,City,State,Country,Lens1,Lens2,Lens3
FROM Cl_Systems
WHERE contains(Lens1,@strSearchTerm) or contains(Lens2,@strSearchTerm) or contains(Lens3,@strSearchTerm)
return 0
end
View 4 Replies
View Related
Mar 19, 2002
Hello everyone,
I am trying to code a store procedure using nested cursor and I don't know where I am doing wrong.
I am getting message:
Server: Msg 170, Level 15, State 1, Procedure sp_alicare_99, Line 212
Line 212: Incorrect syntax near 'first_cursor'.
Can someone please help me with this, it's very urgent and I have to use it for production purposes.
Here is the store proc:
-- 05/24/2000 V1.0
-- populate Los Table
print 'sp_alicare_99'
go
if exists(select name
from sysobjects
where name='sp_alicare_99'
and type='P')
drop procedure sp_alicare_99
go
CREATE PROC sp_alicare_99
As
Begin
/**********
* sp_alicare_99 (V603.132)
***********/
set nocount on
declare
@diagnosis_code char(6) -- patient diagnostic code
,@age_group char(1) -- patient age_group
,@diagnosis_procedure char(1) -- patient diagnosis_procedure
,@category_code char(1) -- patient category_code
,@regioncode char(1) -- patient regioncode
,@sum_level char(1) -- patient sum_level
,@total_pts char(8) -- patient total_pts
,@average_stay char(3) -- patient average_stay
,@variance char(3) -- variance
,@pct10 char(2) -- pct10
,@pct10gt99 char(1) -- pct10gt99
,@pct25 char(2) -- pct25
,@pct25gt99 char(1) -- pct25gt99
,@pct50 char(2) -- pct50
,@pct50gt99 char(1) -- pct50gt99
,@pct75 char(2) -- pct75
,@pct75gt99 char(1) -- pct75gt99
,@pct90 char(2) -- pct90
,@pct90gt99 char(1) -- pct90gt99
,@pct95 char(2) -- pct95
,@pct95gt99 char(1) -- pct95gt99
,@pct99 char(2) -- pct99
,@pct99gt99 char(1) -- pct99gt99
,@icd9_code char(6)
,@cpt4_code char(6)
declare first_csr cursor for
select
icd9_code
,cpt4_code
from los_copy
open first_csr
fetch next from first_csr into
@icd9_code
,@cpt4_code
While @@fetch_status = 0
begin
declare ext001_csr cursor for
select
diagnosis_code
,age_group
,diagnosis_procedure
,category_code
,regioncode
,sum_level
,total_pts
,average_stay
,variance
,pct10
,pct10gt99
,pct25
,pct25gt99
,pct50
,pct50gt99
,pct75
,pct75gt99
,pct90
,pct90gt99
,pct95
,pct95gt99
,pct99
,pct99gt99
from
los
where
diagnosis_code = @icd9_code
open ext001_csr
fetch next from ext001_csr into
@diagnosis_code
,@age_group
,@diagnosis_procedure
,@category_code
,@regioncode
,@sum_level
,@total_pts
,@average_stay
,@variance
,@pct10
,@pct10gt99
,@pct25
,@pct25gt99
,@pct50
,@pct50gt99
,@pct75
,@pct75gt99
,@pct90
,@pct90gt99
,@pct95
,@pct95gt99
,@pct99
,@pct99gt99
if @@fetch_status = 0
Begin
-- insert data
insert into los_load
(
diagnosis_code
,age_group
,diagnosis_procedure
,category_code
,regioncode
,sum_level
,total_pts
,average_stay
,variance
,pct10
,pct10gt99
,pct25
,pct25gt99
,pct50
,pct50gt99
,pct75
,pct75gt99
,pct90
,pct90gt99
,pct95
,pct95gt99
,pct99
,pct99gt99
)
values
(
@cpt4_code
,@age_group
,@diagnosis_procedure
,@category_code
,@regioncode
,@sum_level
,@total_pts
,@average_stay
,@variance
,@pct10
,@pct10gt99
,@pct25
,@pct25gt99
,@pct50
,@pct50gt99
,@pct75
,@pct75gt99
,@pct90
,@pct90gt99
,@pct95
,@pct95gt99
,@pct99
,@pct99gt99
)
fetch next from ext001_csr into
@diagnosis_code
,@age_group
,@diagnosis_procedure
,@category_code
,@regioncode
,@sum_level
,@total_pts
,@average_stay
,@variance
,@pct10
,@pct10gt99
,@pct25
,@pct25gt99
,@pct50
,@pct50gt99
,@pct75
,@pct75gt99
,@pct90
,@pct90gt99
,@pct95
,@pct95gt99
,@pct99
,@pct99gt99
close ext001_csr
deallocate ext001_csr
fetch next from first_cursor
into
@icd9_code
,@cpt4_code
close first_cursor
deallocate first_cursor
go
if not exists(select name
from sysobjects
where name='sp_alicare_99'
and type='P')
print '>>ERROR:procedure sp_alicare_99 not created.'
go
Thanks in advance!!
View 1 Replies
View Related
Nov 3, 2000
Hey,
How do I put anything there for an INT type???
It is in a stored procedure and I have six parameters that I am passing in, some are blank and I want to put a default all variable in the where statement.
Select tbl_EventDate.EventDate , tbl_EventDate.EventDateID_p FROM tbl_EventDate WHERE EventDateID_p = %
This does not work.... I tried * too..... hmmmm....
View 1 Replies
View Related
Mar 10, 2004
Hi,
Below is my store proc:
create procedure usp_find_case_by_date_usrcode_client
@usrcode as varchar(5) = '%',
@disch_dt_start as varchar (12) = '%',
@disch_dt_end as varchar (12) = '%',
@client_id char(2) = '%'
as
select distinct t.patient_id,p.first_name,p.last_name,convert(char (12),p.birthdate,101) Birthdate,sex,t.auth_id,t.place_of_service,convert (char(12),t.discharge_date,101) Discharge_date, i.service_id from patient_transaction t
inner join inpatient_service i on t.patient_id = i.patient_id and t.tran_id = i.tran_id
and CONVERT(VARCHAR,ISNULL(i.service_id ,0)) LIKE @usrcode and t. place_of_service = '1' and t.decision in ('1', '2') and
t.discharge_date between convert(char(12),@disch_dt_start,101) and convert(char(12),@disch_dt_end,101) and
CONVERT(VARCHAR,ISNULL(substring(t.patient_id,1,2) ,0)) LIKE @client_id
inner join patient p
on t.patient_id = p.patient_id
order by 1
I want to get all clients if I don't specify the parameter @client_id
but when I do that I get 0 records. What am I doing wrong??
Thanks in advance.
View 6 Replies
View Related
Mar 22, 2006
samir khatri writes "hello sir,
i m new in the world of database so please help me to create a perticular store proc
i want to get data from 3 tables and 2 field of a table is match with the same field of another table and it cant work
i write that code so u can understand easily but it dont work so please modify that and make it workable
select a.a_dis_id,b.name as fromname,b.name as toname,a.a_dis_km,c.a_all_name,c.a_all_rate from
a_distance a,levels b,a_allowance c where
a.a_dis_from=b.cid and a.a_dis_to=b.cid and c.a_all_id=a.a_all_id
Thank You
Waiting for yur reply....."
View 3 Replies
View Related
Aug 28, 2007
---Master query (Assuming this will display 20 rows) we are dealing with one single table that we need to pivot.
select id,fname,lname,sponsor from masterfile where id='TARZAN'
---from those 20 rows there is id that sponsored some one else
---explain: assuming ID=SHAGGY FNAME=Shaggy LNAME=Scooby (was sponsored by Tarzan)
---but Shaggy has sponsored 2 others
select id,fname,lname,sponsor from masterfile where id='SHAGGY'
---will display 3 rows and if from one of those 3 others that belongs to shaggy
---I also want to get their information ID,fname,lname
---This can go up to 10 per saying is like building a Tree with branches and leaves under those branches
---Explain:
---Let's assume that we have an OAK Tree that has 4 main branches
---and out of those 4 main branches 2 of them have other branches with leaves under it
--I would like to do this process in a cursor (Store Proc) is possible
--the way I have it now taking way too long
--because in within so many (do while loop)
TIA
Please pardon me, I could not find better layout to explain this.
View 4 Replies
View Related
Jun 20, 2006
Hi all,
I have a SP that needs to return a record set based upon the values of calling another SP. The 2nd SP uses the output parameter and works fine. However, the resulting Insert doesnt see the value. I cannot for the life of me work out why not!
My other question is how do I stop the imbedded procedures from outputing a result? When the procedure is run in analyser it produces three sets of data. The first two being the outputs for the two SPs.
Any help would be much appreciated!
Code as follows:
CREATE PROCEDURE [dbo].[trl_GetOpenDurations] AS
--- CALLS the sp trl_CallOpenDuration with the following params
---1 min minute value - int
---2 max minute value - int
---3 return value - int - interval in minutes
set nocount on
declare @min int --- less than 1 min
declare @hour int --- more than 1 min, less than 1 hour
create table #t ([Type] VARCHAR(10) ,[Value] int)
EXECUTE trl_callOpenDuration 0,1,@min
insert into #t ([Type],[Value]) values ('<1Min', @min)
EXECUTE trl_callOpenDuration 1,60,@hour
insert into #t ([Type],[Value]) values ('<1Hour',@hour)
---get data from table
Select * from #t
GO
RESULTS:
<1Min NULL
<1Hour NULL
View 1 Replies
View Related
Dec 21, 2001
I was wondering if anybody can help me in a storeProc for SQL 7 which can get the realational tables frm a database and put them into filesystem...
Cheers
--Nik
View 1 Replies
View Related
Jun 19, 2003
Is there anyway to force sql server to use the same execution plan?
One of the sp for web page takes about 2 minutes to execute. Once it's executed through query analyser, it takes relatively less time.
Is there any explanation for this?
View 5 Replies
View Related
Jul 1, 2002
Hello everyone,
I am looking for a store procedure which validates certain keywords like delete,truncate,update,insert etc. and restricts them to be used by users in all of my store procs which takes strings as inputs.
Thanks.
View 3 Replies
View Related
Nov 8, 2000
What command do you use to run a DTS package from a stored procedure....
The XP Copy is not working???
Thanks,
~Lee
View 1 Replies
View Related
May 19, 2004
Is it possible that i can use a store proc to modify all the rest of my store procedures that i have in my DB ??
I have so many created allready and it will be to long to go throught each one of them to modify my text inside.
what i wish to do is a store proc that will allow me to loop to all my store proc of the current DB and look inside for specific text that i would like to change with the new value !!
any advise or example..
thanx.
View 4 Replies
View Related
Apr 4, 2008
Hello i have this store proc with the syntax below. The getdate get the current date but i need to change the date this one time to 3/20/2005. I was wondering is there a way to do that an not modify my sp. I tried to harcode 3/20/2005 as asofdate and i get all 0 in my table.
getDate() AS AsOfDate'
View 4 Replies
View Related
Jan 25, 2008
Hi all,
One of the Sql server crashed and when the server restart, the Store Procs have locked icon. Can't modify or do anything with it, but the proc still run. What could have cause this, and how can I remove the lock icon?
thanks
View 1 Replies
View Related
Jul 26, 2006
QuestionWhat is the best way to transfer Stored Procedures to another db without having to script it?
WHYWe need to transfer stored procedures from one development database to another on different machines not on the same network.
PlatformStudio 2005
SQL Server Management Studio Express
advTHANKSance
View 5 Replies
View Related
May 15, 2008
Hello,
I'm brand new to this forum and I'm stuck. We've got a query which queries three tables: booking, catheter and patients. The following (dodgy) query has pulled off the data for years, without problems:
SELECT
CARDIAC_CATHETER.CARDIAC_CATHETER_ID,
CARDIAC_CATHETER.OPERATOR1,
CARDIAC_CATHETER.TEST_DATE,
BOOKING.STATUS,
BOOKING.TEST_DATE AS BOOKING_TEST_DATE,
BOOKING.PROCEDURE_DATE_TIME,
CARDIAC_CATHETER.ITEM_NO,
CARDIAC_CATHETER.BILLING_CATEGORY,
PATIENTS.REFERRING_PHYSICIAN1,
PATIENTS.HOSPITAL_UNIT_NUMBER
FROM
(CARDIAC_CATHETER INNER JOIN PATIENTS ON CARDIAC_CATHETER.PATIENT_ID = PATIENTS.PATIENT_ID)
LEFT OUTER JOIN BOOKING ON PATIENTS.PATIENT_ID = BOOKING.PATIENT_ID AND 'CATHETER' = BOOKING.CLINIC AND BOOKING.STATUS <> 'CANCELLED' AND BOOKING.PROCEDURE_DATE_TIME >= (CARDIAC_CATHETER.TEST_DATE - 1)
AND BOOKING.PROCEDURE_DATE_TIME < (CARDIAC_CATHETER.TEST_DATE + 1)
WHERE
CARDIAC_CATHETER.TEST_DATE > '2005-04-01' AND CARDIAC_CATHETER.BILLING_CATEGORY LIKE '3%'
About 2500 perfect rows and 12 rows which have duplicate catheter id values. There are six pairs of duplicated records. It's only the cardiac_catheter.catheter_id and cardiac_catheter.test_date which are duplicated - the first row shown below contains correct values, the second doens't. The other values returned, on both rows, are correct. Here is some sample data:
CARDIAC_CATHETER_ID
cat_id1234
cat_id1234
CARDIAC_CATHETER_TEST_DATE
19/12/2005 13:17
19/12/2005 13:17
BOOKING_TEST_DATE
19/12/2005 13:33
19/12/2005 08:46
PROCEDURE_DATE_TIME
20/12/2005 10:30
19/12/2005 08:46
CLINIC
CATHETER
CATHETER
I know the query is rubbish. Has anyone got any idea how it can be improved and sorted so that we don't pull back ambiguous data?
Thanks,
Stewart
View 5 Replies
View Related
Jul 23, 2005
I have a table where inactive names are lower case and active names areuppercase. Note: Not my design.Anyways I want to select all names form this table where the name isuppercase. I see collate and ASCII pop up in searches but the examplesdon't seem usable in queries as much as they were for creating tablesand such.Thanks,Phil
View 5 Replies
View Related
