i created a new login in MSSQLServer 2005 by the following options
security -> Login -> NewLogin
and i created the login name as test and password as test.
when i try to connect the sqlserver using this username and password i'm getting the following error.
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233)"
Hi All,I want to catch the next MSSQL error in my SQL code with following continuecalculationsServer: Msg 17, Level 16, State 1, Line 1SQL Server does not exist or access denied.If REMOTE_SERVER_1 is inaccessible (as in (a) below) the executing of SQLwill not continue with (b) - I need the code in (b) to run despite whetherthe previous exec was successful or not - Any ideas?begin transaction(a) exec REMOTE_SERVER_1...bankinsert '1' , '1' , 1 , 0 , 0(b) print @@errorcommit transactionwhere REMOTE_SERVER_1 is link to server created byEXEC sp_addlinkedserver @server = 'REMOTE_SERVER_1', @srvproduct = '',@provider = 'SQLOLEDB', @datasrc = 'MYCOMP1', @catalog = 'mirror2'EXEC sp_addlinkedsrvlogin @rmtsrvname = 'REMOTE_SERVER_1', .....Exec sp_serveroption 'REMOTE_SERVER_1', 'data access', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc out', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'collation compatible', 'true'Any help will be greatly appreciated
Hello, I've create a test website with logincontrols, but if i have ulpoaded my website to a webserver and i want to login then a retrieve this error message everytime:
Server Error in '/' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
Anyone know why I might be getting this problem/error when I try to install MSSQL from the Microsoft website? Here's a picture of the error that I'm getting. And I have a 40+ gig hard drive and 36+ gigs of it are free. So, I don't know why I'm getting this problem. Can anyone help? I would greatly appreciate it, thanks!
I've been working on a project that exchanges data with 2 different mssql dbs. Today I compiled my website and test it locally on remote databases. Everything seemed ok. Then I uploaded all files to the server and after an hour something strange has happened, I do not know why. I could still reach the website locally using remote connstrings but when I try to visit One of the databases could not be connected, ASP.NET said.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Interesting thing is that website can authorize the request (I mean I can login) after that it throws this error.
I hope this forum is suitable for posting my question.
I have a site in asp and vb with an access database. It's work just fine. I want to convert my database from access to mssql express. So I convert it with Microsoft SQL Server Migration Assistant for Access. I also install mssql server on my computer, so I can test my site at home. But now, I have trouble, I've received many errors like:
[Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near '#'. (this appear when I try to insert date and time in database, witch in access database I have no problem)
ODBC driver does not support the requested properties (this appears when I make a selection in database, where I use inner join).
And many more ...
Do I have to rewrite the code to all my files? It's so different working with MSSQL comparing with Access database?
From what I read, I understand that after converting the database from Access to MSSQL, I must change only the connection string and the site have no problem. But it seems it's not so easy. I'm pretty disappointed.
Can you give me an advice? Or some links where I can read something that can help me.
Hi. I have a strange problem. ASP.NET pages works, but when I try to estamblish a connection, I get an error: Shared Memory Provider:Connection was terminated pointing to Connection.Open();.I must say that this same code has worked before and I have some Windows App that works (connects to a the same MSSQL), and ASP.NET pages don't.I've tried to Disable the Shared memory from SQL Configuration Manager, but no luck.The only thing that I've notice is that when I go to IIS Manager and click properties on web site properties and under the ASP.NET tab i combobox I don't have anything, just empty combobox.I repeat that ASP.NET pages working, only when I want to contact the database, error raises.I've tried to instal framework again, hoping that combobox wan't be empty, but it's still the same.Please, help me with this. Iam getting desperate and a little bit angry most of all because this same code has worked before.Thanks.
WE followed the microsoft article: " how to use sql mail in Microsoft SQL Server 6.5 with Microsoft Outlook and Microsoft Exchange Server. WE also followed the suggestions outlined in document Q153159:" Troublshooting SQLMAIL with Microsoft Exchange Server.
After following all of the instuctions in both documents we get an error message of 17951:'Failed to start Microsoft Mail Session' when we click on sqlmail under server name in Enterprise Manager.
My network adminsitrator and I are both stumped why this doesn't work.
Has any one encountered this before? How do we resolve this?
Any information which can be provided will be greatly appreciated. THanks.
My application currently use an ODBC connectivity to MSSQL 2005 DBs and after rebooting the application was no longer able to connect to the database and I was not able to connect to the database via Management Studios. When trying to connect via Mngmt Studio get msg: TCP Provider error 0 - An established connection was aborted by software in your host machine (Microsoft SQL Server, ERROR 10053).
When trying to connect via the DSN connnection test get msg: SQL State 01000 - SQL Server 10053 SQL Server State 08501 - SQL Server 11
Can you please help me out in getting this back - thanks a lot
Hi,I'm using sql server 2005 express edition. I have created a database using sql server management studio express edition. Now I'm trying to connect it in visual studio 2005. It show following error. An error has occurred while establishing a connection to the server. When connections to SQL 5erver 2005, this failure may be caused by the fact under the server's default settings SQL Server does not allow remote connections, (provider: Named Pipes Provider, error: 40- Could not open a connection to SQL Server) I have enables named pipes from Sql services configuration manager.
I had a problem today where BCP would not read the format file I created giving the following error:
I/O error while reading BCP format file.
I searched the archives here at swynk.com and found a thread titled exactly the same as the one I am now creating. There were numerous responses to this thread but none of them seemed to solve the problem for me (short of the one that suggested using BCP to create the format file, which I didn't want to do).
I used BCP to create a format file for me (which looked identical to the format file that I created) and it worked fine. With my suspicions aroused, I used a binary file viewer to look at the contents of each file and highlight the differences. Apart from the usual variations in whitespace I noticed that the my file did not have any carriage returnline feed at the end of the last row definition.
My format file ended at the end of the last row definition line. It did not have any carriage returns and line feeds. I matched the one generated by BCP and added the following "
" to the end of the file, tested my format file and it worked perfectly.
The moral of the story is, make sure when you create a format file, you have an empty line at the end of the file (ie: after your last "Server Column Name", make sure you have "
TITLE: Connect to Server Cannot connect to MyPCName. ADDITIONAL INFORMATION: Login failed for user 'MyPCNameMyLogin'. Reason: The account is disabled. (MS Server, Error: 18470)
------------------------------ Server Name: MyPCName Error Number: 18470 Severity: 14 State: 1 Line Number: 65536
------------------------------ Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnErro r(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndW arning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlInternalConnectionTds.Com pleteLogin(Boolean enlistOK) at System.Data.SqlClient.SqlInternalConnectionTds.Ope nLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ct or(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateC onnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.Creat eNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) at System.Data.ProviderBase.DbConnectionFactory.GetCo nnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenCo nnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at Microsoft.SqlServer.Management.UI.VSIntegration.Ob jectExplorer.ObjectExplorer.ValidateConnection(UIC onnectionInfo ci, IServerType server) at Microsoft.SqlServer.Management.UI.ConnectionDlg.Co nnector.ConnectionThreadUser() ================================================== ====
I have moved the system databases master and mssqlsystermresource database. And after that I was unable to restart the MSSQL Server service. This is SQL Server 2005
I had moved the master db under the minimal configuration. using the parameters /f and /T3608
I have moved the system databases master and mssqlsystermresource database. And after that I was unable to restart the MSSQL Server service. This is SQL Server 2005
I had moved the master db under the minimal configuration. using the parameters /f and /T3608
I have moved the system databases master and mssqlsystermresource database. And after that I was unable to restart the MSSQL Server service. This is SQL Server 2005
I had moved the master db under the minimal configuration. using the parameters /f and /T3608
Hi i have a problem with IIS6 and MSSQL and i hope that someone canhelp me.this is the configuration:Windows 2003IIS6MSSQL 7.0 Standard EditionADO 2.5I have the following error that occur randomly when browsing mywebsites.Microsoft OLE DB Provider for SQL Server error '80004005'[DBNETLIB][ConnectionOpen (Connect()).]Server SQL inesistente o accessonegato.(translate from italian: Server unexisting or access denied)it occurs when users (more than one but not hundred...) browse someasp pages where there's a lot ofrecordset opening-closing acivity. The ado connection is correctlyopen once and closed at the end of the scriptand all recordset are opened as static.It also happens if a single user refreash repeatedly that pages.It seems that mssql says it doesn't exists but i think it want to sayit is too busy.However the load is not excessive and the same pages works perfectlyon a system using Windows 2000 Serverand the same version of mssql installed.One more thing ..... for some reasons that i can't control MSSQL andIIS are on the same server.Can anyone help me ? It's just a lack of performance or there is somemisconfiguaration in MSSQL (as i think...). ?Could the IIS6 application pool configuration cause this problem ?I don't know what to say....thanks in advance.
I have installed SQL 2005 and was trying to run one of the Samples. I installed SQL as an instance, but when I run the setup script, it fails because it can not assign permissions to the ASPNET account.
It looks like it thinks the account is ServerNameInstanceNameASPNET, but it should be ServerNameASPNET.
Hi.. I tried to setup MSSQL2000 trans replicatiom using push subscription method. My Publisher is also my distributor. But whenever I started the dstribution agent, I got the following error. It has problem connecting to subscriber's DB with the following error. I had tried that the login is 100% fine. But why this error appear ? Any help?
The name ' ' is not permitted in this context. Only constants, expressions, or variables allowed here. Column names are not permitted. (Source: Subsriber (Data source); Error number: 128)
I’m having the fallowing error when I try to open/access a linked server Error: Error 7302: Could not create an instance of OLE DB provider 'MSOLAP.2'. OLE DB error trace [Non-interface error: CoCreate of DSO for MSOLAP.2 returned 0x80004005].
I have already tried to create the server using SEM and also with SQL syntax in ISQLW. Code: EXEC sp_addlinkedserver @server='LINKED_OLAP', @srvproduct='', @provider='MSOLAP.2', @datasrc='MyServerName.MyDomain’, @catalog='MyDataBase'
I’m allowed to create the linked server but I can’t use it.
How many result-rows does mssql return should be used asynchronous method to use mssql cursor, can get the best performance in any time in any result offset?
i want to make the cursor fast in any time whatever how many results returned
i was planning to create a database migration tool .. its a certain database of a DMS (document management system) to another DMS (two different DMS)... from DMS using msde 2000 server .. and tranfer to a DMS using a postgre sql or mssql .. depends ..
they have different table structures and names . . :D
i was thing of what language shall i use.. or what language is the best to work on this kind of project :)
Does enabling/disabling Data Execution Prevention have a performanceimpact on SQL 2000 or SQL 2005?For SQL best performance - how should I configure for:Processor Scheduling:Programs or Background servicesMemory Usage:Programs or System Cache
I am a bit new to the MSSQL server. In our application, we use so many SQL queries. To imporve the performance, we used the Database enigine Tuning tool to create the indexes. The older version of the application supports MSSQL 2000 also. To re-create these new indexes, I have an issue in running these "CREATE INDEX" commands as the statements generated for index creation are done in MSSQL 2005. The statements include "INCLUDES" keyword which is supported in MSSQL 2005 but not in MSSQL 2000.
Ex:-
CREATE INDEX IND_001_PPM_PA ON PPM_PROCESS_ACTIVITY
I am currently work on mssql 6.5. On my workstation, I have mssql 6.5 cient software.
However, I would like to install mssql 7.0 server on my nt workstation and work with it to become familiar with 7.0. Can I install mssql 7.0 server on my nt workstation? Can mssql 6.5 client coexist with mssql 7.0 on the same machine if they are in different directories?
Ben writes "I have a sql script that doesn't function very well when it's executed on a SQL 2000 server.
The scrpt looks like this:
--------------------------------------------------------------------------------------------------- USE [master] GO IF NOT EXISTS (SELECT * FROM master.dbo.syslogins WHERE loginname = N'SSDBUSERNAME') EXEC sp_addlogin N'SSDBUSERNAME', N'SSDBPASSWORD' GO GRANT ADMINISTER BULK OPERATIONS TO [SSDBUSERNAME] GO GRANT AUTHENTICATE SERVER TO [SSDBUSERNAME] GO GRANT CONNECT SQL TO [SSDBUSERNAME] GO GRANT CONTROL SERVER TO [SSDBUSERNAME] GO GRANT CREATE ANY DATABASE TO [SSDBUSERNAME] GO USE [master] GO If EXISTS (Select * FROM master.dbo.syslogins WHERE loginname = N'SSDBUSERNAME') ALTER LOGIN [SSDBUSERNAME] WITH PASSWORD=N'SSDBPASSWORD' GO GRANT ADMINISTER BULK OPERATIONS TO [SSDBUSERNAME] GO GRANT AUTHENTICATE SERVER TO [SSDBUSERNAME] GO GRANT CONNECT SQL TO [SSDBUSERNAME] GO GRANT CONTROL SERVER TO [SSDBUSERNAME] GO GRANT CREATE ANY DATABASE TO [SSDBUSERNAME] GO USE [master] GO IF EXISTS (select * from dbo.sysdatabases where name = 'ISIZ') DROP DATABASE [ISIZ] GO USE [SurveyData] GO exec sp_adduser 'SSDBUSERNAME' GRANT INSERT, UPDATE, SELECT, DELETE TO SSDBUSERNAME GO USE [SurveyManagement] GO exec sp_adduser 'SSDBUSERNAME' GRANT INSERT, UPDATE, SELECT, DELETE TO SSDBUSERNAME ---------------------------------------------------------------
I need to be converted to a script that can be executed on both MSSQL 2000 and MSSQL 2005.
I was wondering if somebody there could help me with this problem?!
I've been tasked to move our production databases on MSSQL 2000 to 2005. I've supported MSSQL since version 6.5 and performed migrations to successor versions.
Current Environment is MSSQL 2000 32-bit with current Service Packs.
I've performed mock migrations on Test servers upgrading all Production instances simultaneously from MSSQL 2000 to 2005 32-bit. The Test environment is identical to Production minus server name, IP etc. Also I have a separate server with MSSQL 2005 installed where I use the DETACH / ATTACH and BACKUP / RESTORE method for migration / acceptance testing. There are approximately 30 databases totaling 70 GB. This has gone as expected and fairly successful. Vendors have been coordinated with to update code and staff for acceptance testing.
I'd prefer going directly to MSSQL 2005 64-bit instead if possible due to memory benefits etc. This is where I'd like some feedback prior to borrowing a 64-bit server for testing.
Upgrade options:
1. Is it better to migrate from MSSQL 2000 32-bit to 2005 64-bit via: a. DETACH / ATTACH b. BACKUP / RESTORE c. Is one method more advantageous relating to the end result? 2. Regarding XP clients, have issues been experienced with the default SQL Server driver or is an alternate recommended for XP clients to connect to a MSSQL 64-bit server databases? 3. If you have performed this migration and have relevant experience please pass them along.
When installing SQLEXPRESS I am getting this message:
Setup failed because service MSSQL$SQLExpress is disabled for the current hardware profile. Services must be set with the current Hardware Profile logon property enabled.
DB is developed on local computer with MSSQL 2005 Express. My host is on MSSQL 2005 workgroup. Are they compatible, because I am getting errors? Is my approach wrong?
I have tried several approaches.
A) I created a backup of database on my local, then placed a copy on the server. Then I tried to restore through Server Management Studio. I get this error.
TITLE: Microsoft SQL Server Management Studio
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
The backed-up database has on-disk structure version 611. The server supports version 539 and cannot restore or upgrade this database.
RESTORE FILELIST is terminating abnormally. (Microsoft SQL Server, Error: 3169)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=08.00.2039&EvtSrc=MSSQLServer&EvtID=3169&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
B: I also have tried copying the database. I put it in the same path as the other databases that can be read with server management studio on the server. Then, tried to get to it through server managements studio and it did not appear. So I tried to attach it. Then I received this error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'MROACH1'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Could not find row in sysindexes for database ID 10, object ID 1, index ID 1. Run DBCC CHECKTABLE on sysindexes.
Could not open new database 'LodgingDB'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 602)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=602&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
C: I have also tried opening the Database, and back up file through Server Management Studio. without success.
D: I also tried Windows and Software update at microsoft update, but no updates were recommended for Version on Server.
I'm surprised this is so hard. My original data base was created in same family of software. 2005 MS SQL Express. I could use some direct help from someone experienced with this. Am I doing it wrong or are the DB versions incompatible.
When trying to install Business Contact Manager (BCM) for Outlook 2007, the setup failed and I was refered to a log file in my Local Settings/Temp folder. The log actually says that Business Contact Manager was installed sucessfully! BCM is supposed to install SQL Express 2005 as an instance or as instance if SQL Express is already installed. There is an MSSMLBIZ instance in Services..
Who can I send the Log File to for analysis and the fix feedback?
When I first went into Computer Management and clicked on Services and Applications in the left panel, the error message appeared "Snap-in failed to intialize. Name: SQL Server Configuration Manager CLSID:{CA9F8727-31DF-41D2-975C-887D84903967} This message diappeared when I clicked on Services and Applications again. Under Services, there are 3 SQL services - one is an application that was uninstalled 3-4 weeks ago and I disabled this service. The other 2 are: SQL Server (MSSMLBIZ) and the other one is SQL Server (SQLEXPRESS) When I tried to start either of the last 2, the message appeared: Services "Could not start the SQL Server (MSSMLBIZ) service on Local Computer. Error 3: The system cannot find the path specified. Under Program Files/Microsoft SQL Server/MSSGL.1 folder is mostly empty. So, it seems like the Path in the Registry is not valid and that nothing is being installed in the MSSQL.1 folder. If so, how do I fix this?
How do I get the BCM SQL instance to install and run properly? what do the messages in Services mean and how do I resolve these.
