Hi!
What kind off settings do I use if Iam gone have diffrent languages on the databse?? What kind of collections settings do I use then If Iam going to have macedonia(Cyrillic), Swedish, and lots of other contries???
What kind of collection Seetings do I use under the installation of the MSSQL Server 2005?
Since SQL Server only provide 8 languages by default where swedish is not one of them how am I supposed to get a swedish interface in my report manager? Are there any language packs one can download. I saw a solution where the language in the ReportViewer were overridden by implementing its interface. Is this possible to do in the report manager as well? It would be good if it was possible to have swedish in the report builder also.
Thank you
/Mats
I NEED TO BCP DATA FROM A TABLE TO BE COMPLIANT WITH THE
ISO-8859-1 (ISO-LATIN-1) TYPEFACE
IS THERE A SWITCH I CAN USE TO TAKE CARE OF THIS.
EMAD
Is it possible to have in the same MsSQLServer database several languages:
French, english, german, spanish... (latin langages)
but also langages with different characterset (greek, cyrilic...)
What should be the type of data (char ou nchar(unicode)) ?
what should be the colation ?
Thanks
hi
we get ASCII data inserted into a SQL Server database by ODBC connection from an old UNIX system.
Example: INSERT INTO test.db VALUES ('123abc', '456ĐĐ Đ')
All characters > 128 are converted to "?" automatically.
We tried to setup the database to the appropriate codepage, but we allways get "?" inserted.
Hi, i have a query that goes like this
select *
from Users
where UserName Like =@Username;
the values for 'UserName' go like this
Adrián
Jesús
Fernández
Güero
all of them have spanish accents. is there a way to make the "like" value to ignore the spanish characters? (á, é, í, ó, ú, ü, etc)
That is because the user will not always write "Jesús" they will write "Jesus" or they will not write "Adrián" they will write "Adrian"
so is there any way to tell the SQL Server engine to ignore those characters?
thanks!!!
Can I specify a collate value for a column in a table that includes all the possible languages in the world or atleast Latin 1 and Eastern European languages.
My DB Collation is set to Latin 1 and the columns in the tables are all nvarchar or ntext, but certain hungarian characters are not displayed correctly.
What do all these collation codes represent:
SQL_EBCDIC037_CP1_CS_AS
211
SQL_EBCDIC273_CP1_CS_AS
212
SQL_EBCDIC277_CP1_CS_AS
213
SQL_EBCDIC278_CP1_CS_AS
214
SQL_EBCDIC280_CP1_CS_AS
215
SQL_EBCDIC284_CP1_CS_AS
216
SQL_EBCDIC285_CP1_CS_AS
217
SQL_EBCDIC297_CP1_CS_AS
They seem generic. Is there one collation that includes all the Eastern Europen Languages and Latin 1 charset. Please let me know.
Thanks,
Manisha
I don't quite understand what I am asking for so hopefully this is enough to get an answer or some explanation.
Using SQL2014 I need to use a Chinese collation. I have been told that even with a Chinese collation Latin characters are there. Is there a Chinese collation that will provide Latin case-insensitive behavior?
We should support multiple language(Latin,chinese,japanese,korea) in one report when exporting to PDF format in reporting service. We have used Arial Unicode as our font. But when we exported the report, the korean language item can not be displayed. Any idea on that? Thanks a lot.
View 3 Replies View RelatedHow many result-rows does mssql return should be used asynchronous method to use mssql cursor, can get the best performance in any time in any result offset?
i want to make the cursor fast in any time whatever how many results returned
Hi,
i was planning to create a database migration tool ..
its a certain database of a DMS (document management system) to
another DMS (two different DMS)... from DMS using msde 2000 server .. and tranfer to a DMS using a postgre sql or mssql .. depends ..
they have different table structures and names . . :D
i was thing of what language shall i use.. or what language is the best to work on this kind of project :)
hoping for your kind help guys. thanks :)
br
Frozenice
Does enabling/disabling Data Execution Prevention have a performanceimpact on SQL 2000 or SQL 2005?For SQL best performance - how should I configure for:Processor Scheduling:Programs or Background servicesMemory Usage:Programs or System Cache
View 9 Replies View RelatedHi,
I am a bit new to the MSSQL server. In our application, we use so many SQL queries. To imporve the performance, we used the Database enigine Tuning tool to create the indexes. The older version of the application supports MSSQL 2000 also. To re-create these new indexes, I have an issue in running these "CREATE INDEX" commands as the statements generated for index creation are done in MSSQL 2005. The statements include "INCLUDES" keyword which is supported in MSSQL 2005 but not in MSSQL 2000.
Ex:-
CREATE INDEX IND_001_PPM_PA ON PPM_PROCESS_ACTIVITY
(ACTIVITY_NAME ASC, PROCESS_NAME ASC, START_TIME ASC, ISMONITORED ASC)
INCLUDE
(INSTANCE_ID, ACTIVITY_TYPE, STATUS, END_TIME, ORGANIZATION);
Any help in creating such indexes in 2000 version is welcome.
Thanks,
Suresh.
Hello
We are using SQL 2005 and now we are planning to use SQL 2000. what are the ways to do the process.
We taken the script spcificall for 2000 and run it in SQL 200. But we are getting the error in SCRIPT?
Could you please give me the step to do?
Thanks,
Sankar R
Hello:
I am currently work on mssql 6.5. On my workstation, I have mssql 6.5
cient software.
However, I would like to install mssql 7.0 server on my nt workstation
and work with it to become familiar with 7.0. Can I install mssql 7.0
server on my nt workstation? Can mssql 6.5 client coexist with mssql 7.0
on the same machine if they are in different directories?
Thanks.
David Spaisman
Ben writes "I have a sql script that doesn't function very well when it's executed on a SQL 2000 server.
The scrpt looks like this:
---------------------------------------------------------------------------------------------------
USE [master]
GO
IF NOT EXISTS (SELECT * FROM master.dbo.syslogins WHERE loginname = N'SSDBUSERNAME')
EXEC sp_addlogin N'SSDBUSERNAME', N'SSDBPASSWORD'
GO
GRANT ADMINISTER BULK OPERATIONS TO [SSDBUSERNAME]
GO
GRANT AUTHENTICATE SERVER TO [SSDBUSERNAME]
GO
GRANT CONNECT SQL TO [SSDBUSERNAME]
GO
GRANT CONTROL SERVER TO [SSDBUSERNAME]
GO
GRANT CREATE ANY DATABASE TO [SSDBUSERNAME]
GO
USE [master]
GO
If EXISTS (Select * FROM master.dbo.syslogins WHERE loginname = N'SSDBUSERNAME')
ALTER LOGIN [SSDBUSERNAME] WITH PASSWORD=N'SSDBPASSWORD'
GO
GRANT ADMINISTER BULK OPERATIONS TO [SSDBUSERNAME]
GO
GRANT AUTHENTICATE SERVER TO [SSDBUSERNAME]
GO
GRANT CONNECT SQL TO [SSDBUSERNAME]
GO
GRANT CONTROL SERVER TO [SSDBUSERNAME]
GO
GRANT CREATE ANY DATABASE TO [SSDBUSERNAME]
GO
USE [master]
GO
IF EXISTS (select * from dbo.sysdatabases where name = 'ISIZ')
DROP DATABASE [ISIZ]
GO
USE [SurveyData]
GO
exec sp_adduser 'SSDBUSERNAME'
GRANT INSERT, UPDATE, SELECT, DELETE
TO SSDBUSERNAME
GO
USE [SurveyManagement]
GO
exec sp_adduser 'SSDBUSERNAME'
GRANT INSERT, UPDATE, SELECT, DELETE
TO SSDBUSERNAME
---------------------------------------------------------------
I need to be converted to a script that can be executed on both MSSQL 2000 and MSSQL 2005.
I was wondering if somebody there could help me with this problem?!
Thanks,
Ben"
I've been tasked to move our production databases on MSSQL 2000 to 2005. I've supported MSSQL since version 6.5 and performed migrations to successor versions.
Current Environment is MSSQL 2000 32-bit with current Service Packs.
I've performed mock migrations on Test servers upgrading all Production instances simultaneously from MSSQL 2000 to 2005 32-bit. The Test environment is identical to Production minus server name, IP etc. Also I have a separate server with MSSQL 2005 installed where I use the DETACH / ATTACH and BACKUP / RESTORE method for migration / acceptance testing. There are approximately 30 databases totaling 70 GB. This has gone as expected and fairly successful. Vendors have been coordinated with to update code and staff for acceptance testing.
I'd prefer going directly to MSSQL 2005 64-bit instead if possible due to memory benefits etc. This is where I'd like some feedback prior to borrowing a 64-bit server for testing.
Upgrade options:
1. Is it better to migrate from MSSQL 2000 32-bit to 2005 64-bit via:
a. DETACH / ATTACH
b. BACKUP / RESTORE
c. Is one method more advantageous relating to the end result?
2. Regarding XP clients, have issues been experienced with the default SQL Server driver or is an alternate recommended for XP clients to connect to a MSSQL 64-bit server databases?
3. If you have performed this migration and have relevant experience please pass them along.
DB is developed on local computer with MSSQL 2005 Express. My host is on MSSQL 2005 workgroup. Are they compatible, because I am getting errors? Is my approach wrong?
I have tried several approaches.
A) I created a backup of database on my local, then placed a copy on the server. Then I tried to restore through Server Management Studio. I get this error.
TITLE: Microsoft SQL Server Management Studio
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
The backed-up database has on-disk structure version 611. The server supports version 539 and cannot restore or upgrade this database.
RESTORE FILELIST is terminating abnormally. (Microsoft SQL Server, Error: 3169)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=08.00.2039&EvtSrc=MSSQLServer&EvtID=3169&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
B: I also have tried copying the database. I put it in the same path as the other databases that can be read with server management studio on the server. Then, tried to get to it through server managements studio and it did not appear. So I tried to attach it. Then I received this error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'MROACH1'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Could not find row in sysindexes for database ID 10, object ID 1, index ID 1. Run DBCC CHECKTABLE on sysindexes.
Could not open new database 'LodgingDB'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 602)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=602&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
C: I have also tried opening the Database, and back up file through Server Management Studio. without success.
D: I also tried Windows and Software update at microsoft update, but no updates were recommended for Version on Server.
I'm surprised this is so hard. My original data base was created in same family of software. 2005 MS SQL Express. I could use some direct help from someone experienced with this. Am I doing it wrong or are the DB versions incompatible.
Mark Roach
How to convert a database in MSSQL 2000 to MSSQL 2005 database.Is there any tool or documentation available for this?
View 3 Replies View RelatedI have my MSSQL hosted, any interface i can use so i can't connect to the data source?
for Mysql, i know i can use phpmyadmin, or mysql interface.
i have no idea for MSSQL, any advices?
i know there is one, which is Toad, but it has a lots of limitations, any good idea?
thanks.
Hi,
till now i have used mysql with php.now i want to use mssql with php.my php and apache versions are
php 5.2.3
apache 2.2.4
from where i can get mssql and what i need to run my php scripts with mssql database.iam newbie in mssql.any of your help will be surely appreciated
thanks
mrjameer
Hi!
What is the best way to migrate MSSQL 2005 Express -> MSSQL 2005 Srv?
Hey guys, im trying to write an application to connect to a database on a mssql server using asp.net. Thus far any code i've seen and tried seems to not recognize the ODBC connections, so i was hoping you guys can offer some suggestions. For the example lets say the server is mssql9.aaa.com the db name is xyz with a username of welsh_welsh and the password is q with a table named abc in the database. How exactly would you go about connecting. The code i've tried so far is below:
<%
"Data Source = mssql9.aaa.com;Initial Catalog = xyz;UserID = welsh_welsh;Password = q;"
%>
The error i get from the sever is
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately. Compiler Error Message: BC30035: Syntax error.
any free videos to study mssql server 2000 queries
View 1 Replies View RelatedIm trying to write a very basic stored porcedure that looks up some data and performs simple calculations, the results of which are then saved (updated) to a specific table. To be more specific, I use the avg function in a simple select statement to average some figures based on a where clause:
SELECT AVG(exactskip)FROM HistoryWHERE Exact = '023'
...This should return 425.66, but it returns either 425 or 425.0000.
The results which are returned and being saved are being shown as a rounded integer or shown with 4 zeros after the decimal. I know it should be ending with a decimal in almost all cases. The column in the table that the result are being saved to is formated as smallmoney. The column in the table whos data is being averaged is set as an integer. Question, how can I make the avg function calculate the decimal values and save the appropriate decimal results. What changes do I need to make to my select statement. Any help would be appreciated.
I am still very new to all this, so please be specific and somewhat step by step in any reply
Thanks
Scott
I have an SQL 2000 server set up that runs perfectly, and an IIS set up that runs perfectly but I can not get the webpage to read data from the dbase. Is there a connection that I have to make or a program I have to load? The page is a .asp page, and when I run the page that should connectI do not get any errors in the dbase at all, so I can only imagine that it is not even seeing an attemptat a connection. Any help is appreciated.
View 1 Replies View Relatedhi,
I'm starting to write web application using ASP, the backend is MSSQL7.
Can I have some sample codes to look at. How to get connection and
select statements and get results and display onto the web.
thanks
Hi, is there an easy way to open a SQL 7 db using DAO code. Seems like a simple
set db = currentdb
won't do the trick. I also tried to open a workspace first, but I keep getting error when I try to do something with the recordsets, and I can't RunSQL. Any suggestions?
I am trying to run a DTS from a vbs but I am pulling my hair out at this point (grey anyway). Here is the script.
set objDTSPackage = CreateObject("DTS.Package")
objDTSPackage.LoadFromSQLServer "(local)", "sa", "", DTSSQLStgFlag_Default, "", "", "", "dts_download", 0
it is not doing it, and giving me error on all steps within the package
your help is greatly appreciated
thank you
Hey Guys, are you aware of anyone moving from MYSQL to MSSQL or vice versa - what were your experiences - Mark Smith
View 1 Replies View RelatedI just installed windows server update services on a 2k3 system. I am using mssql dekstop edition as the database. trend micro office scan also uses mysql. When I try to approve an update it sometimes just times out. When it does work it takes for ever. The CPU usage shoots through the roof. about %99 by the sqlservr process. It also take 190,000 k of RAM. Is this normal and how can I fix it? I think its a problem with the mysql but i don't know what. I have tried restarting. Its a 2.4 GHz system with 1gb of RAM. It only has 2 machines connected to the WSUS(more to come) Anyone any ideas would be great
View 1 Replies View Related-- =============================================-- Create table with IDENTITY column-- =============================================create table logviewer(idLog smallint IDENTITY(1, 1),timeLog, Char(14) NOT NULL,dateLog, Char(14) NOT NULL,typeLog, Char(14) NOT NULL,adressLog, Char(90) NOT NULL,messageLog, Char(254) NOT NULL)Server: Nachr.-Nr. 173, Schweregrad 15, Status 1, Zeile 8Die Definition für die timeLog-Spalte muss einen Datentyp enthalten.eng. define timLog colom as datatypeCould anyone help me please?
View 3 Replies View RelatedHey Guys, are you aware of anyone moving from MYSQL to MSSQL or vice versa - what were your experiences - Mark Smith
View 1 Replies View Related