MSSQL7 Installation
Apr 27, 1999
While installing SQL 7.0 it turned out that the size of my primary patrtition where the Windows NT system files are {C: drive) does not have enough space to take the MSSQL7 system files it wanted to install there. Can the size of this partition be increased (am using FAT file system), can the MSSQL7 system files be installed somewhere else, or should I just do an f disk and start all over again with a new Windows NT installation? (No data on this server yet.) Thanks for your help!
View 2 Replies
ADVERTISEMENT
May 11, 2007
Hi all,
I hv very little experience handling mssql7. Recently I was assigned a task to maintain a website that uses mssql 7. My system admin has already installed mssql7 server components on a Win2K box and I have only managed to install mssql7 client components on my winXP box.
Whenever I try to connect to the remote server using enterprise manager, I always encounter the same error message complaining that
Quote:
A connection could not be established to "Server Name" - Access denied
ConnectionOpen (CreateFile())..
Please Verify SQL Server is running and check you SQL Server registration properties (by right clicking on the GAMMA
node) and try again.
I have used the client network utility in my winxp box to set up an alias for the server using various network libraries such as TCP/IP and named pipe, but it keeps on returning the same access denial message.
I am running out of brain juice figuring about what's wrong. Could somebody please help me? Thanks in advanced.
View 1 Replies
View Related
Jul 16, 1999
I have a SQL Server 7.0 installed on a Compaq PC running on Windows NT. This PC has 64 MB of RAM and it is a Pentium 166. There are 3 Clients connected to it. If there is only one PC running an apllication requesting data from the server, the performance is tolerable, but when there is more than one PC simultenously requesting data from the server, problems araise. Either all of the PCS running the application show zero records on the apllication or one of them show no records. Any mouse click action on the clients will bring the server to almost a halt. Can anyone tell me the reason to these problems?
View 1 Replies
View Related
Feb 23, 2001
We've experienced a problem with one of our MSSQL7 servers where transactions are not being committed to the database. We've experienced this in Query Analyzer -- where we run several (simple) insert or update statements. Although the script runs successfully, the rows do not appear in the tables. The implicit transaction setting is off for the server.
We have also experienced this problem with other tools that run against this server via ODBC.
I thought the default setting for MSSQL7 is to auto-commit transactions and I've seen nothing in the error log that indicates that the updates were rolled back. I have compared our server, database and client configuration options to other servers that do not have this problem and have no idea where to look next.
Has anyone encountered this problem? Or does anyone have some ideas about where I could look for more information?
Thanks!
View 2 Replies
View Related
Jan 4, 2000
Hi,
I am trying to figure out a way to link a MySQL database (running on Linux) to my MSSQL7 database. My ultimate goal is to synchronize inserted/updated/deleted data in the MSSQL7 DB to the MySQL DB.
I have tried a few things and have had a few ideas. They are:
1) Create table triggers in the MSSQL7 DB that will synchronize the data to the MySQL DB. I can't figure out how to run Transact/SQL statements (INSERT, UPDATE, DELETE, etc.) into an ODBC DSN pointing to the MySQL DB. I think this could be done with a linked server (see next item).
2) Add a linked server under Security->Linked Servers in the MSSQL7 Enterprise Manager. I have managed to get the remote MySQL server to link in here. I can even see the table names in the server browser, so that's encouraging! However, I cannot figure out the syntax of the fully-qualified table names in my SELECT statements. I have tried this:
SELECT * from LinuxBox..MyDB.MyTable
-and-
SELECT * from LinuxBox.MyDB.MyDB.MyTable
but I get:
Server: Msg 7312, Level 16, State 1, Line 1
Invalid use of schema and/or catalog for OLE DB provider 'MSDASQL'. A four-part name was supplied, but the provider does not expose the necessary interfaces to use a catalog and/or schema.
This statement:
SELECT * from LinuxBox...MyTable;
gives me:
Server: Msg 7313, Level 16, State 1, Line 1
Invalid schema or catalog specified for provider 'MSDASQL'.
Since I can see the table names in the linked server browser in Enterprise Manager, though, some kind of connection must be active. I just need to figure out how to refer to the remote tables.
A big problem is that when I supply a catalog name while defining the linked server, I get an error message from the Enterprise Manager:
Error 7399: OLE DB provider 'MSDASQL' reported an error. The provider reported an unexpected catastrophic failure.
Therefore, I can't define a catalog with the linked server. I think a catalog is required for the "4-part name" to work in the SELECT statement above.
3) Write an extended stored procedure that uses the ODBC function library to make a connection to the MySQL DSN and have a table trigger call the ESP. Hoping to be able to do something simpler than this!
Any suggestions would be greatly appreciated!
Thanks,
Greg
View 1 Replies
View Related
Feb 6, 2004
Dear All,
could you please tell me if MSSQL7 is compliant with Windows 2000 ?
Which Service Pack is needed from both MSSQL and W2000 ?
many thanks in advance for your help ;)
View 2 Replies
View Related
May 23, 2000
I'm trying to bcp logins from 6.5 to 7.0 while maintaining the passwords. I tried doing a bcp in native format, but when I try to bcp in, I get a Dr. Watson. I figured out the issues with syslogins not be updatable on 7.0 because its a view. I'm also aware of the problems associated with the fact that sysxlogins on 7.0 has different column definitions than syslogins on 6.5. I just don't know how to get around these roadblocks. Anyone have any ideas??
Thanks in advance,
Darias
View 1 Replies
View Related
Nov 24, 2005
I was using MSSQL7 for a long period.
I upsized to MSSQL7 from Access some years ago. Without any particular reason when writing code in stored procedures, when I wanred to select some records having a bit column to true I used the syntax bitcolumn=-1 (and not bitcolumn=1). This behavior was used in Access. Everything worked fine. Then I moved to MSSQL2000 and by restoring the MSSQL7 database I had no problem.
However, in order to use some features of MSSQL2000 I had to run the sp
sp_dbcmptlevel <database>, 80
After that the condition bitcolumn=-1 didn't work.
Can anyone verify this behavior, since I have to make dozens of changes in my stored procedures and triggers???
Regards,
Manolis Perrakis
View 2 Replies
View Related
Feb 2, 2004
Hi there,
Does anyone know if it's possible to perform a MSSQL7 database backup on a network drive instead of the local drives ?
...and if yes, how to proceed ?
It seems to be possible under MSSQL2000.
Many thanks for your help in advance,
Matt
View 6 Replies
View Related
Jul 20, 2005
I have a table in mssql7 that has 7000000 record and I want to take100000 records out of it and place them into the new machine withmssql2000. The new machine will also have the same table name, so Iwant to append the 100000 records into that table.Thanks,Royal344--Direct access to this group with http://web2news.comhttp://web2news.com/?comp.databases.ms-sqlserver
View 1 Replies
View Related
Jul 20, 2005
Sorry about the huge post, but I think this is the amount ofinformation necessary for someone to help me with a good answer.I'm writing a statistical analysis program in ASP.net and MSSQL7 thatanalyzes data that I've collected from my business's webpage and thehits it's collecting from the various pay-per-click (PPC) engines.I've arrived at problems writing a SQL call to generate certainstatistics.Whenever someone enters our site from one of the PPC search engines, Iwrite out a row to the Hits table. In that table are the followingcolumns:HitID - the Unique ID assigned to each hit that comes into the siteKeyword - the keyword the user searched on when he or she came to thesiteSearchEngine - the PPC engine the user came fromSource - this is pretty much always 'PPC'...if we were to do otherthings, like a newsletter, then this would be different.TimeArrived - the date and time the user arrived at the website. Ihave no idea why I didn't call it "datearrived," since I use "date"and not "time" pretty much everywhere else...(I don't think the rest are important, but they might be, so I'llinclude them for completeness's sake)Referring URL - the URL the user came fromReferring Website - the string between the 'http://' and the first '/'in the URL. I know it's redundant information, but when I designedthis part, I didn't know how to parse it out afterwards, so I justfigured I'd duplicate it.Page Visited - the page the user first arrived atWhen a person comes to the site, I also write out a session cookiecontaining the user's hitID. If the person fills out an enrollmentform (a process which we refer to as "responding"), I attach thatsession ID to the form. The response form (and thus the responsestable) is long; these are the important fields:id - a unique ID for each responsedate - the date and time of the responsestatus - a varchar field containing a status code. I would have madeit a number, but I wanted it to be viewable from looking at the rawdatabase.hitid - the HitID of the user, taken from the session cookie. If thereis no session cookie (for whatever reason), the HidID is written outas 0. While it wouldn't occur often, I can't guarantee that there willnever be more than one response record attached to a singular hitid.Later, some of the responses turn into "confirmations", which meansthat they've actually ordered from us, not just filled out the form.This usually happens about three or four days after the initialresponse. When this happens, the status of the response is changed toa phrase containing the word "confirm" in it (there are a few of them,but they all contain that word).So now that we've collected all this marketing intel., I need toanalyze it.I've written a parser that takes reports from various pay-per-clickcompanies and puts them into a table called PPC. Information in thiscolumn is written out as one record per search engine per keyword perday. The schema is as follows:id - a unique ID for the record in the tabledate - the date to which the information in the record appliessearchengine - the PPC engine to which the information applieskeyword - the keyword to which the information appliesclicks - the number of clicks on the applicable keyword on theapplicable search engine on the applicable day.impressions - same as clicks, but for impressionscpc - the cost per click on the applicable keyword ...avgpos - (I don't always have a value for this field) The averageposition that the keyword was shown in for the applicable keyword ...With this data in, the last step is actually analyzing the threetables for useful statistics on the various keywords, search engines,and time frames. That's the step I've been trying to complete.So what I need is a SQL call that I can run that generates a tablewith the following information:SearchEngineKeywordCost / Click - When calculating the CPC, I can't just take an averageof all the records. I need to calculate the total amount spent per day(clicks * cpc), add that up for every day, and then divide that by thenumber of total clicks. Just doing an average doesn't take intoaccount the fact that some days we'll get more clicks than others.Total Spent - # Clicks * CPC#Responses - counting the number of records in the responses table#Confirms - counting the number of records in the responses table with"confirm" in their statusTotal Spent / #ResponsesTotal Spent / #ConfirmsOh yeah, and I want to be able to order by any four of the fields inany order, narrow my selection to only those keywords that either areor contain a user-specified string, further narrow my selection toonly those records that fit other user-specified criteria for any ofthe columns in the table I'm generating, and select only the top xrecords (where x is a user-specified number). I already haveuser-controls that output the SQL for all of these things, but I needto have places in which I may put that SQL in my call.After many trials and tribulations, I've come up with the followingSQL call. Right now, its output for nearly every row is incorrect, Ithink in a large part due to the fact that the method that I'm usingto generate the number of clicks is yielding incorrect values.If you'd like to help me and you think that modifying the followingcall is easier than writing a whole new one, be my guest; if you'dprefer to write a new one, I'm game for that, too. I'm just concernedwith its working right now, and any help you can give me is greatlyappreciated.Anyway, here's the call:/*sp_dboption @dbname='NDP', @optname='Select Into', @optvalue=true;*//*Running the above might be necessary to get the "Select Into"s towork*/Drop table ResponsesPPCDrop table ConfirmPPCDrop table TempPPCSELECT Responses.[ID] as [ID], Responses.Status, PPC.SearchEngine,PPC.KeywordInto ResponsesPPCFROM Responses, PPCWHERE Responses.HitID IN(SELECT Hits.HitIDFROM HitsWHERE Hits.SearchEngine = PPC.SearchEngineAND Hits.Keyword = PPC.Keyword)SELECT ID, Status, SearchEngine, KeywordInto ConfirmPPCFROM ResponsesPPCWHERE Status LIKE "%confirm%"Order by SearchEngine, KeywordSELECT PPC.SearchEngine, PPC.Keyword,SUM(PPC.Clicks), /*I noticed that thiscolumn gives me incorrect values(I don't need it in my final report, but it's useful for debugging).For some keywords, it gives me huge numbers(e.g. 265 clicks on one word that got ~10 clicks /day over five days),and for others, it doesn't give me enough. I think this is a majorpartof what's throwing off the rest of the statistics*/Case SUM(PPC.Clicks) WHEN 0 THEN 0 ELSESUM(PPC.clicks * PPC.cpc) / SUM(PPC.Clicks) END as CPC,SUM(PPC.clicks * PPC.cpc) AS TotalCost,count(ResponsesPPC.ID) As NumResponses,Count(ConfirmPPC.ID) As Confirms,(Case Count(ResponsesPPC.ID) WHEN 0 THEN 0 ELSESUM(PPC.clicks * PPC.cpc) / count(ResponsesPPC.ID) END) ASCostPerResponse,(Case Count(ConfirmPPC.ID) WHEN 0 THEN 0 ELSESUM(PPC.clicks * PPC.cpc) / count(ConfirmPPC.ID) END) AsCostPerConfirmFROM (PPC LEFT JOIN ResponsesPPC ON PPC.SearchEngine =ResponsesPPC.SearchEngineAND PPC.Keyword = ResponsesPPC.Keyword)LEFT JOIN ConfirmPPC ON PPC.SearchEngine = ConfirmPPC.SearchEngineAND PPC.Keyword = ConfirmPPC.KeywordGROUP BY PPC.SearchEngine, PPC.KeywordOrder by PPC.keyword desc/*Drop table ResponsesPPCDrop table ConfirmPPCDrop table TempPPC*//*I don't drop them right now so I can look at them,but normally, one would drop those tables.*/Thanks a lot for your help,-Starwiz
View 4 Replies
View Related
Oct 27, 2004
anyone has tried? please advice possible issues, workarounds
tks
View 1 Replies
View Related
Jan 8, 2004
Greetings!
I recently rewrote an old ACCESS 97 application to work with MSSQL 7.
The program works fine until I use a form whiche opens several linked tables at the same time. When closing the Form I get (At unpredictable moments) an ODBC SQL SERVER DRIVER update failure error message.
All rights are set on the tables for Public and even then i keep getting this error at very odd moments. I also had a look in Access at the ODBC refresh rate which is set at 10sec , OLEDB refreshrate 10 sec, and refresh is set at 5sec.
I tried different combinations of timeout settings and even renewing the MDAC to version 2.7.
Nothing helps.
Can anyone give me a tip as to look for the possible source of the error and how to fix it?
Thanks!
Vincent JS
View 2 Replies
View Related
Jul 26, 2007
Hi everyone!
I start to get panic now after 10 hours of different ways of trying to
get my old database from my [Server1]* to my [Server2]*. When Im
trying with the "SQL Server Management Studio" that included in
the MSSQL 2005 but that just tells me it dosn't support any version
before MSSQL2000.. I've also tryed with some third part softwares
like EMS but no joy!... Its 5 databases from the old server that I MUST
get into the new one.. Anyone know howto do this?
[Server1]
Windows 2000
MSSQL7
[Server2]
Windows Small Business Server 2003 R2.
Includes MSSQL 2005 Premium edition.
Kind Regards
// Magnus Dahl
View 4 Replies
View Related
Mar 9, 2013
The 6:th of march Sql server data tools for Visual Studio 2012 was released.
[URL]
I seem to be unable to install this using the link provided on the blog page. I'm getting a "Same architecture installation" error. Running on the machine is Visual Studio 2012 Premium & Sql Server 2012 (64bit).
why I'm getting this installation error.
View 14 Replies
View Related
Oct 2, 2005
I am trying to install SQL Server 2000 on a Win2K OS machine but Iget this error message:"A previous program installation created pending file operations onthe installation machine. You must restart the computer before runningsetup."I see others have had this problem but have fixed it using the solutionin:http://support.microsoft.com/defaul...kb;en-us;312995I have tried the solution but to no avail. The registry key:HKEY_LOCAL_MACHINESYSTEMCurrentControlSetContro lSessionManagerPendingFileRenameOperations keeps reappearing as soon as Iclose RegEdit.Any ideas?Thanks,lq
View 3 Replies
View Related
Jul 23, 2005
Please help,I am trying to install MSDE 2000 so that Backup exec will run on thisserver. I have gotten so far as to find an entry in my SQLSTP.TXT filethat says that c:mssql7 was detected so the install fails.Now, to start with there is no directory called C:mssql7 on thisserver. I have gone through all MS articles on manual removal of SQLserver and instances. I have searched the registry for mssql7 andremoved any keys that matched, as per MS article I have searched onSQLBOOT.dll and it is not present anywhere on my system and I still getthe same results.2:07:44 Begin Action: Detection12:07:44 SQL Server version already installed: 7.00.62312:07:44 Previous Install SQL Path: C:MSSQL712:07:44 Previous Install SQL Data Path: C:MSSQL712:07:44 End Action Detection12:07:44 Begin Action: ODBCLocked12:07:44 End Action ODBCLocked12:07:44 GetDefinition returned: 112:07:44 Previous SQL Server ProductType: MSDE [0x4]12:07:44 This combination of Package and Operating System allows a fullproduct install.can anyone think of anything here..what else could be causing the server to think there is a previousversion of SQL 7 on this box!!!?
View 1 Replies
View Related
May 3, 2006
I get an error when trying to install the SQL Native Client. It
says it cannot find the installation package and to use a valid copy of
'sqlncli.msi'. I've downloaded the Express setup twice and get
the same error from both of them.
I'm attempting this in a VMWare session setup for Windows 2K, Advanced
Server. I am trying to test my installation and setup
procedures. This is not a production setup, just install testing
and documentation. I have allocated only 272MB to the VMWare
session, which is why the system doesn't meet the recommended settings.
Any help would be greatly appreciated.
Below is the Summary.txt output file.
Microsoft SQL Server 2005 9.00.2047.00
==============================
OS Version : Microsoft Windows 2000 Advanced Server Service Pack 4 (Build 2195)
Time : Wed May 03 09:54:23 2006
CPCWIN2KVM1 : The current system does not meet recommended hardware
requirements for this SQL Server release. For detailed hardware
requirements, see the readme file or SQL Server Books Online.
Machine : CPCWIN2KVM1
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.2047.00
Install : Successful
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : SQL Native Client
Error : An
installation package for the product Microsoft SQL Server Native Client
cannot be found. Try the installation again using a valid copy of the
installation package 'sqlncli.msi'.
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : Microsoft SQL Server Native Client
Product Version : 9.00.2047.00
Install : Failed
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_SQLNCLI_1.log
Last Action : InstallFinalize
Error String : An installation package for the
product Microsoft SQL Server Native Client cannot be found. Try the
installation again using a valid copy of the installation package
'sqlncli.msi'.
Error Number : 1706
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.2047.00
Install : Successful
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install : Successful
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_MSXML6_1.log
--------------------------------------------------------------------------------
View 4 Replies
View Related
Oct 2, 2006
Hi every one,
I'd like to install SQL SERVER 2005 Express Edition ,I begin to install it from DVD but during the installation it dosn't ask me about any instance and after installation there isn't SQLExpress service and I can't use sql server .(there are not MSSQL and Binn directory in sql server 2005) but when I install visual studio 2005 and after that I install sql server 2005 it ask me for name of instance and with this way every thing is ok and I use sql server completely.
I 'd like to know the complete installation of sql server 2005 is depend on installation of visual studio 2005 befor it ?if not how can I introduce any instance after installation of sel server 2005 .
View 11 Replies
View Related
Feb 28, 2004
Hello,
Yesterday, to start SQLServer, I have used the DOS Command
setup SAPWD=xxx from C:sql2ksp3MSDE.
I think tne mix mode of authentification is correct.
But when I want to connect to the database by SQLEntMan, it doesn't work ...
How can I connect to SQLServer ?
Server adress = name of the computer
Username = ?
Password = password of windows ? password of of SAPWD ?
Thank you any help
Ben
View 1 Replies
View Related
Jun 2, 2005
Hi, I ama trying to install SQL Server Express 2005, when the setup.exe does an anlysis of the machine configuration it tellme that out of 10 checks one has failed, and that the machine needs tobe rebooted in order to fulfill a requirment from a previous installation, I did this and went to start the installation process again only ot be told that this check failure still exists, unfortunately I cannot progress, has anybody experienced this, I am using Windows XP Hone, with ASP.NET 2.0 installed and Web Dev Express 2005 Beta 2Looking forward to hearing fom you
View 3 Replies
View Related
Aug 17, 1998
I am trying the SQL 7 STANDARD installation on WIN`98. However, it creates the directory structure on the hard-disk alonwith files but on connecting to server it comes out with a VC++ assertion failed message.
The TCP/IP sockets are being used and the TCP/IP port (local ping) is working fine. Windows 98 was installed again and there are no prequisites for SQL 7 on 98 but the problem persists !
Anyone who has installed it on WIN`98 ?
TIA
Raghu
View 3 Replies
View Related
Apr 22, 1999
I have problems after installation in W98 of the Desktop.
In Enterprise Manager when I try to connect to the server gives the following error:
Assertion failed!
program c:windowsmmc.exe
file: ../src/sqlsspi.c
line: 119
Expression: Count
after I click on RETRY and gives the error:
a connection could not be establish to TEST05 - [SQL-DMO]code execution exception:
EXCEPTION_BREAKPOINT.
Please verify SQL SERVER is running and check your SQL Server registration properties and try again.
I check, and in Service Manager is TEST05 - MSSQLServer - running.
Also in Query Analyzer gives an error:
Assertion failed!
program c:mssql7innisqlw.exe
file: ../src/sqlsspi.c
line: 119
Expression: Count
after I click on RETRY and gives the error:
This program (ISQLW) has performed an ilegal operation and will be shutdown
ISQLW caused an exception 03H in module MSVCRT.dll at 0177:7800...
Where is the problem? From wrong installation or W98?
The installation CD was camming in the book :
"Special Edition" - Using SQL SERVER 7.0 from Stephen Wynkoop.
Please reply,
Tanks.
View 5 Replies
View Related
Nov 13, 2001
Hi:
We ran SQL Replication in Production SQL 7.0 with SP1. We encountered some problems. We ran the same tests in QA which used SQL 7.0 with SP1. The problems were gone.
Both Production and QA used SQL 7.0 with SP1 but they came from different resource CDs. Production one was installed from Microsoft Select CD in 1998. I did not recall the CD which was used for QA.
It indicated those two SQL 7.0 functioned differently and Production on had a bug in it. Can somebody to share with me a detecting tool and a criteria to find out where is wrong in the Production SQL 7.0?
Thank you.
Joan
View 2 Replies
View Related
Mar 6, 2001
Hi,
I am having pentium 3 with windows 98 I had Sql Server 7 installed But due to some problem i uninstalled it.
I am having difficulty in reinstalling the same i uninstalled completely and even removed entries in registry and tried to install But i am getting the same error always.
1)Acmsetup failed
2)setup failed to configure the server Refer to the server error logs and cnfgsvr,out for more information
There is nothing in server error logs
cnfgsvr.out file looks like this
Starting Service ...
An error occurred while attempting to start the service (1460)
SQL Server configuration failed.
What is ACMSETUP what it does how i can prevent its failure is the failure of ACMSETUP a reason for sqlserver set up failure
I appreciate ur replies
View 2 Replies
View Related
Oct 7, 2002
I have installed sqlserver 2000 (desktop edition) on my pc at home. I am running windows xp home edition. what i am finding is i am not able to log in to either Enterprise Manager or Query Analyzer. I have tried using different accounts during installation.
The service has started and the server seems to be running, but I cannot make a connection.
any suggestions,
thanks,
jim
View 5 Replies
View Related
Jul 30, 2001
We have installed SQL Server 6.5 in an NT system. We are able to start and stop the server from a client enterprise manager, but unable to connect to the databases there(ie., we are able to right-click on the server and start and stop the server but unable to right-click and connect to the server). Can anyone help us out with this?
View 1 Replies
View Related
May 28, 2008
Hey guys, I'm new to this and had some general questions. I'm currently running windows xp pro with sql server 2005 tools installed. However I cannot deploy any of the reports due to not having IIS installed. I've now installed IIS however, do I need to completely uninstall SQL Server 2005 tools and is there a particular order to uninstall it in order to get everything to work?
As you can see I'm totally lost/new to this.
View 1 Replies
View Related
May 30, 2008
I tried to install sql server 2005 professional Edition in my machine.While doing the step by step installation, it was not showing the " Instance name " and " server accounts" ( i.e whether it is built-in system account or domain user account) slides and so finally i am not able to complete the installation. Kindly help me to rectify this. Thanks in advance.
View 1 Replies
View Related
Jun 6, 2008
Hey Guys,Im going to install the SQL Server 2005,can any one tell me what are the things do i need to know before the installation.Its 64 bit and clustered.Active/passive
View 2 Replies
View Related
Oct 27, 2005
I am new with SQL and have a question regarding SQL Connections. I have 2 Win2003 Servers(tom and Jerry) setup with Microsoft Cluster installed in Active-->Active Mode. Also, on both of these servers, I have SQL 2000 installed in Active-->Active mode as well. So I installed SQL2000 on Tom first and gave the SQL server name of Dog1 which has and IP assigned to it, at the same time I gave an instance name of D1. So now my SQL on Tom server reads Dog1D1. I did another installation on Tom and gave it Dog2D2. Than I went and installed SQL again on Jerry, this time and gave name of CatC3, and CatC4.
Now in my DNS, I have Dog1, Dog2, Cat3, Cat4 defined with an IP I assigned.
Problem I am running into is I cannot connect my application or make and ODBC connection to Dog1D1, Dog2D2, Cat3C3 or Cat4C4. I am getting Server not found message.
Can anyone help me and tell me where I am going wrong, as I need to get this app up ASAP.
Thanks,
Jay
View 4 Replies
View Related
Nov 3, 2005
Hi guys,
i am new to the forum. i got sql server 2000 and i wanted to install it on my home pc. i am able to do that.
But when i create a database out of it and then take it out of the SQl folder and put it in some other folder in my C: drive and then if i try to link it to my program it gives me a error stating that it is not accessible.
MY QUESTION : Am i doing something wrong ?
Do i have to set some properties on the database i
create?if yes how to do it?
Plz reply
Thanks
View 1 Replies
View Related
Sep 24, 2007
Hi,
SQL Server 2005 has been installed on windows server 2003 machine by the support team.
Microsoft SQL Server Management Studio9.00.3042.00
Now this machine has been passed on to me to create databases, tables, etc...
On this server, I open the management studio and I get the connect to server windows.
What should the entries in the connect to server window be for me to get to the next stage where I can start building databases.
At present, I tried local or localhost and windows/sql authentication.
Still can not get to the management studio window.
Any thoughts please?
Thanks
View 1 Replies
View Related
