Please help me i am new to ssis ....I am trying to send an email using mail task and I am sure that ISP works fine with smtp. I am entering all the correct information in the task but it takes a long time to run the task and then comes back with a failure error. can someone help me find an easy way to send an email to group of emails...I even tried to send it to 1 email and it is still not working.
Dear all, I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail. but still the Mail Task is failing.. plz suggest.
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete [Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.". Progress: The SendMail task is completed. - 100 percent complete Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
I have got the problem connected with Send Mail Task in SSIS. The general idea was: sending email alert to different email users. I tried to use Foreach Loop task which loops through dataset (where the emails are stored) and assign different email addresses to SSIS package variable.
When I try to use this task inside Foreach Loop task I receive this error message: "Error: 0xC002F304 at Send Mail Task, Send Mail Task: An error occurred with the following error message: "The parameter 'address' cannot be an empty string."
The SSIS package has variable (string) which is binded with ToLine - property of Send Mail task (it was set up in Expressions tab of Send Mail task). This ToLine property should assign different emails during every loop of Foreach Loop task.
But unfortunately is seems to be not true, because Send Mail task does not allow to assign different values to ToLine property while is in Run-Time.
Have you discovered this quite bizzare Send Mail task behaviour before ?? I appreciate every help and suggestions.
The send mail task in ssis was failing with following error
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.". Progress: The SendMail task is completed. - 100 percent complete Task Send Mail Task failed
The firewall for SMTP server was opened.
And successful in sending mail using Database Mail task from the sql server
Do any one have idea why this difference is? Do any one ever faced similar issue?
One reason I could found is McAfee virus scan policy is stopping the SSIS Send mail task.
(source: 9/25/2007 9:00:04 AM Blocked by port blocking rule C:Program FilesMicrosoft SQL Server90DTSinnDtsDebugHost.exe Anti-virus Standard Protection : Prevent mass mailing worms from sending mail 10.237.5.105:25)
i am having a weird problem with the send mail task in SSIS. I have tried to different things, and i end up with two different errors:
Firstly, i have setup a data dump to excel, and the send mail taks emails this to specific email addresses.
In the Send mail task i have validated to SMTP server, and its correct.
I have manually entered all the information in the Send mail task, and i am sending to multiple email addresses. These are all seperated by a semi colan. I run the task and it fails on the send mail task with the follwoing error:
Error: 0xC002F304 at Send Mail Task, Send Mail Task: An error occurred with the following error message: "Unable to send to all recipients.".
Task failed: Send Mail Task
I have validated all the email address and they are correct. I did some searching and someone suggested to replace the semi colan with a comma. I do this and i get the follwoing error"
Error: 0xC002F304 at Send Mail Task, Send Mail Task: An error occurred with the following error message: "Mailbox unavailable. The server response was: 5.7.1 Unable to relay for rpwallis@bigpond.com.au".
I have checked that the IP for the SQL server is on the list of allowed relays on our exchange server. Does it make a difference if i am running this from Visual studio on my laptop?? by this, does it pick up the ip of my laptop when i test this or does it use the ip address of the server?? This would explain the relay message error if so..
Could someone please explain if i should use comma's or semi colans to seperate email addresses? and also lead me in the right direction in relatio to my problems..
I need help to fix SSIS Send Mail Task Error. I have a
Data Flow Read from Sql Data base and then put the query result into excel file (OLE DB Source --> Excel Destination)
Send Mail Task Email excel file from the data flow
Control Flow : Data Flow --> Send Mail Task
The package throws an error below. I tried to disable my antivirus because i thought it's throwing an error because of the antivirus. But, it's still throwing the same error. If i tried to send email without attachment, it works just fine. Is there anybody know how to fix this?
Progress: The SendMail task is initiated. - 0 percent complete [Send Mail Task] Error: An error occurred with the following error message: "The operation has timed out.". Progress: The SendMail task is completed. - 100 percent complete Task Send Mail Task failed
AS SET NOCOUNT ON --lokale Variablen DECLARE @String VARCHAR(1024)
BEGIN TRY
-- next line just for testing linebreak SET @mailBody = 'line one in mail ' + char(13) + char(10) + 'next line in mail' SET @String='dtexec /Ser <myServerName> /SQ DELELPLGDB01/DTS-Pakete/pkt_sendMail /Set Package ask_sendMail.Variables[Benutzer::toAddress].Value;"'+@toAddress+'" /Set Package ask_sendMail.Variables[Benutzer::subject].Value;"'+@subject+'" /Set Package ask_sendMail.Variables[Benutzer::mailBody].Value;"'+@mailBody+'"' EXEC @exitcode = master.dbo.XP_CMDSHELL @String select @exitcode as exitcode
I have a package which is creating a excel file 'ExcelName.xls' and storing in 'E:ReportingDelivered_Reports'. Now I have to attach this report using send mail task and send it to given mail id. To achieve this I have configured the send mail task and in Expression Builder, I have selected the below expression:
I need file name should be 'ExcelName_20150601' where suffix is the current date. But I recieve file which name is 'ExcelName', which is the original file name.
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com) B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com) C - Just the end portion of the SMTP properties: (abcd.efgh.company.com) D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
I know you can specify additional recipients in the To column by sepperating them with a semicolon. But whats the easiest way to send to several users, when the email address must be retrieved from a table with a query like this:
select email from problem_subscribers
where project = 'project1'
and statusmail = 'OnError'
So when the eventhandler gets an OnError i want the mail task to be sent to each problemsubscriber.
I have a developer here that created an SSIS package that contains a Send Mail Task. When this developer runs the package in the Business Intelligence Development Studio (BIDS) the send mail task runs without issue. But when he tries to run it using command line and the DTEXEC program it errors out with the following error message:
Error: 2007-08-01 15:57:44.37
Code: 0xC0012024
Source: Send Mail Task
Description: The task "Send Mail Task" cannot run on this edition of Integration Services. It requires a higher level edition.
End Error
Warning: 2007-08-01 15:57:44.37
Code: 0x80019002
Source: ELMSFeed
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 3:57:24 PM
Finished: 3:57:44 PM
Elapsed: 19.922 seconds
Here are the details of his machine: Visual Studio 2005 Version: 8.0.50727.762 (SP.050727-7600)
Under the Installed Products section it reads: SQL Server Integration Services version: 9.00.3042.00
Once we promoted the package to a production server it runs fine. I can also run the same package from my machine without issue. So, I'm pretty sure that it's specific to his machine, but I have no idea where to start looking.
Is there anyway to send excel file from ssis using send mail task without saving the excel file locally. I need to automate the process which involves loading the excel file from the database and send it to some people.
I have attempted to report out errors at the end of an ETL process by alerting supporting DBAs of errors using the SSIS "Send Mail Task". Task completes along with the sequenced packages, but does not mail anything out. No logic at this time for trigger, just success from the previous task triggering the task to send mail. I also get no errors in the output, and I get no output indicating the send mail task fired, but it does go "green". Do I have to enable database mail and have privileges?
Component Configuration:
SMTP Connection Manager - SMTP Server: arsocex02
Send Mail Editor -
From: messerj@arsocdev.bdev.lab.mil To: sanderss@arsocdev.bdev.lab.mil MessageSourceType: Direct Input Expression: MessageSource = "Package>>> " + @[System:ackageName] +" was executed at>>> " + (DT_WSTR, 40) @[System:tartTime] + " by user>>> " + @[System::UserName] + " on Machine>>> " + @[System::MachineName] + " Errors reported to ERRORS_COURSE_CLASS_STATUS_T: " + (DT_WSTR, 50) @[User::ErrorCourseClassStatus]
We have jobs running successfully on one server. The jobs incluce a send mail step as one of the steps. We migrated the DB to a new server. I also migrated the jobs. Now the job is failing. We are getting error with the send mail task. The error says the stored procedure 'master.dbo.xp_smtp_sendmail' could not be found. I am not sure what is the problem. Please advise.
I set up a sql mail task. Getting this error at runtime:
[Send Mail Task] Error: An error occurred with the following error message: "Mailbox unavailable. The server response was: 5.7.1 Unable to relay for me@my.com".
Has anyone seen this? For the SMTP Server in the smtp connection, I am simply using the mail server name as was set up in db mail.
is there a possibility to send text and variables within a message source of a mail task? because i can only choose between text or variable. i've already tried using @[User::variableName] but that doesn't work. The only way i can think of is building the message text in a separate script task before the mail task, store the message text in a variable and then use this variables as messagesource. is there a better way?
I have a task to send mail when the source file contains null values against id column.
I have set conditional split to split the null value rows to the different destination.Please help me how do i achieve this task when the source file contains null values against id column.
Well I thought it should be easier but send mail task supports only windows authentication but i want to give different user id/password, is there any other way to do it except script?
I am trying to use Send Mail Task to send an email.
In my package all that I have is a Send Mail Task
Settings:
General: Name: Send Mail Task Description: Send Mail Task
Mail: SmtpConnection: SMTP Connection Manager From: awm@company.com To: awm@company.com Cc: Blank BCc: Blank Subject: None MessageSourceType: Direct Input MessageSource: Testing Priority: Normal Attachments: Blank
Expressions: Misc - Expression: Blank
SMTP Connection Manager Editor Connection manager Information Name: SMTP Connection Manager SMTP Server: Tried both IP address and SMTP server name (mail.company.com) Checked both windows authentication and SSL
Its simple I want my package to send an email. but it fails aagain and again.
Task Send Mail Task Validation has started (2) Validation is completed (2) Start, 1:31:22 PM Progress: The SendMail task is initiated. - 0 percent complete [Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.". Progress: The SendMail task is completed. - 100 percent complete Task Send Mail Task failed Finished, 1:31:43 PM, Elapsed time: 00:00:21.359 Validation is completed Start, 1:31:22 PM Warning: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. Finished, 1:31:43 PM, Elapsed time: 00:00:21.359
I was trying to add a send mail task at the end of myPackage. When i run package, the send mail task alone fails but the rest of the package works out fine. the error i got goes like this....
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
could anyone tell me how to get around this? also tell me how shud i add a send mail task so that i can check myself if i went wrong somewhere when i added it to my package.
I just created a very simple package in SQL 2005 using the Send Mail task - i made a connection manager & specified the Exchange server - and then ran the package and i got the below message: I am not sure what i did wrong since the message is pretty general. Anyone help would be very appreciated. Thanks
SSIS package "Test.dtsx" starting. Error: 0xC002F304 at Send Mail Task, Send Mail Task: An error occurred with the following error message: "Failure sending mail.". Task failed: Send Mail Task SSIS package "Test.dtsx" finished: Success.
Hello, I have the following problem. I have a (Test-) package containing a task that deletes rows in a table. On Failure I implemented a Send Mail task that informs me about the output. Now the problem: If I run the package in BIDS on my client computer the mail is sent and I get it. The same is true if I run the package on BIDS on the Testserver where the package is stored. Also I get a mail when running the package as SQL Agent Job. But I never get a message when I simply execute the package from the Managament Studio. Then I get the error message: "The task Send Mail Task cannot run on this edition of Integration Services. It requires a higher level edition. " This is the same whether the package is stored in msdb or in the Filesystem. Does anyone know why this is the case or how I can get rid of this error?