When I try to process my mail with xp_findnextmsg or xp_readmail or xp_sendmail i get these errors:
Server: Msg 18025, Level 16, State 1, Line 0
xp_findnextmsg: failed with mail error 0x80004005
Queries processed: 0.
Server: Msg 18025, Level 16, State 1, Line 0
xp_readmail: failed with mail error 0x80004005
Server: Msg 18025, Level 16, State 1, Line 0
xp_sendmail: failed with mail error 0x80004005
my configuration is:
ms sql 2000 sp3
outlook 2003 as mapi client
sql server is started under account for which mapi profile is configured
Does anyone know what is wrong, and how to solve this problem?
I have SQL Server Reporting services on Windows 2000.
The reports seem to be working well, but I cannot get a subscription to work. The error I get is the one in the subject line.
I look into my log files and see these lines.
ReportingServicesService!emailextension!ab0!12/07/2007-15:02:07:: Error sending email. Microsoft.ReportingServices.Diagnostics.Utilities.RSException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> System.Runtime.InteropServices.COMException (0x80090005): Bad Data.
I've set up DB mail and sent a test e-mail and that comes through fine.
I set up an Operator with email Name: DWhelpton@k-and-s.com;MWeaver@k-and-s.com
I created a job and set up the notifications to e-mail the operator on failure.
When the job runs and fails, I do not get an e-mail and I get the following exception in the db mail log:
Date 2/2/2007 8:35:00 AM Log Database Mail (Database Mail Log)
Log ID 402 Process ID 3936 Last Modified 2/2/2007 8:35:00 AM Last Modified By NT AUTHORITYSYSTEM
Message 1) Exception Information =================== Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException Message: Could not retrieve item from the queue. Data: System.Collections.ListDictionaryInternal TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Controller.ICommand CreateSendMailCommand(Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DBSession) HelpLink: NULL Source: DatabaseMailEngine
StackTrace Information =================== at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession dbSession) at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateCommand(DBSession dbSession) at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db) at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
I am using nt4.0 sp5 with sql7.0 sp3 and exchange client. Does anyone know how to keep xp_sendamil form putting a copy of the mail message in the sent mail folder or an automated process for deleting all mail in the sent folder? As it stands now I must manually delete all messages from the sent mail folder on a daily basis.
Lokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.). ),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
Dear all, I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail. but still the Mail Task is failing.. plz suggest.
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete [Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.". Progress: The SendMail task is completed. - 100 percent complete Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
Hello, The Database Mail feature is already enabled on the server, also I have a mail account on the other server. The problem I faced is that I need to send mail from my SQL Server using a created email account on the other server. How should I configure my email to do that ? Should I use a sysmail_add_account procedure to enable account, also set profile and profile account ? Does this way creates server mail account that is binded with other email account? The mail should be sent from my SQL Server. Thank You.
Our company use yahoo business mail server for our corporate mails. I know that I can configure database mail with SMTP. But when I try to configure database mail account with yahoo bizmail, I cannot do that. It gets configured but when I test it it doesn't send any mails. Do I need to have any special condiguration for this. SMTP address is smtp.bizmail.yahoo.com. Also I have specified the Authentication using my user name and password. Please help
I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com) B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com) C - Just the end portion of the SMTP properties: (abcd.efgh.company.com) D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
I know you can specify additional recipients in the To column by sepperating them with a semicolon. But whats the easiest way to send to several users, when the email address must be retrieved from a table with a query like this:
select email from problem_subscribers
where project = 'project1'
and statusmail = 'OnError'
So when the eventhandler gets an OnError i want the mail task to be sent to each problemsubscriber.
i have to create a scheduled task that does the following:
a) creates an Excel Spreadsheet from a SQL Query
b) sends the spreadsheet to a user
i then need to schedule this task so that it runs every day and creates a NEW spreadsheet (doesnt matter it the name is the same as long as it overwrite what is already there)
HELP me PLEASE i dont like this SQL Game anymore !!
Hi, I have created a profile named sqlmail in exchange server. I tried to run the sql mail service from support service under sql mail to put the profile name, I got the following error: can any one assist me in setting up sql mail in an sql server 2000. .... thanks Ali
Microsoft SQL - DMO(ODBC SQLState: 42000) Error 18025:xp_test_mapi_profile: failed with mail error 0x80004005
NOT ABLE TO SEND TEST MAIL FROM DB MAIL...The mail could not be sent to the recipients because of the mail server failure. . Exception Message: Cannot send mails to mail server. (Failure sending mail.).Exception Message: Cannot send mails to mail server. (Failure sending mail.).
I want to send a simple mail using DATABASE MAIL feature in SQL SERVER 2005.
I've defined a public profile. I've enabled Database Mail stored procedures through the Surface Area Configuration .
but I can't send a mail with sp_send_dbmail stored procedure in 'msdb' database .
when I execute sp_send_dbmail in the Managment Studio the message is "Mail queued" but the mail is not sent.
Could it be related to Service Broker?Because the Surface Area Configuration indicates:'this inctance does not have a Service Broker endpoint'.If so, how should I make an endpoint?
here is the log file after executing sp_send_dbmail:
1) "DatabaseMail process is started"
2) "The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 2 (2007-03-08T00:49:29). Exception Message: Could not connect to mail server. (No connection could be made because the target machine actively refused it)."
The DatabaseMail90.exe is triggred ,so the mail is transfered to the mail queue but DatabaseMail90.exe couldn't give the mail to SMTP server.The promlem is what should I do to make DatabaseMail90.exe able to connect to the server?
Hi. I have problems with sending a mail from SQL Server: SQL Mail starts. Command: xp_sendmail 'MRudyk','Halo!' returns:Unknown recipient: Parameter '@recipients', recipient 'Mrudyk' 'Mrudyk' is valid recipient...
NOT ABLE TO SEND TEST MAIL FROM DB MAIL///The mail could not be sent to the recipients because of the mail server failure. . Exception Message: Cannot send mails to mail server. (Failure sending mail.).Exception Message: Cannot send mails to mail server. (Failure sending mail.).
I had a very recent problem where an excess number of mail records were queued. I ran sysmail_delete_mailitems_sp and deleted them from the InternalMailQueue, but it looks like they still exist in the ExternalMailQueue as I keep getting messages in the log similar to "Mail Id 2277459 has been deleted from sysmail_mailitems table. This mail will not be sent". The MailItem_Id keeps incrementing so it looks like it's working its way through. The problem is we can't use it to sent current mail until it gets through about another 3 million records. If there is some way to delete those records from the External Mail Queue or fast-forward the system to the current records that would be very helpful. Any ideas?
Hello Everyone, I am trying to configure SQL MAIL and SQL SERVER AGENT MAIL feature of SQL SERVER 2000 with Lotus Domino server (Not Microsoft Exchange). Every thing goes fine and it works also. Problem starts when I try to restart SQL Agent Service. It hangs and the status of service remain 'starting'... Also the size of the sqlagent service process goes upto 12MB. I don't understand why? Can any one help me in solving this problem. I am using Windows 2000 Advanced Server and SQL Server 2000 with SP3. Domino client is R5.0.5 and Outlook 2000.
I set up SQL mail to send mail using MS Mail Server off of a separate server. The mail works and the server does mail out with the difference that I must physically click on the "check mail" for MS Messenger to send the mail out to the mail server. I thought about installing MS Exchange (The one I have running on NT workstation) but I can not find the installation kit for Exchange anywhere. I tried Microsoft but I can not find it. Is there a trick to installing Exchange out of the cd rom for NT 4.0? Or is there a setting in Messenger that I have to set for it to send mail by itself?
I need help Please.
Thank you for your help David E. Pierri Pseudo SQL Admin
I have been reading everything i can find regarding sql mail and sqlagent mail.We have a win2k server, sql 2000 and NO, NO, NO exchange server(all upto date on service packs).I have tried repeatadly for days to make this work, and have had noluck so far.1. I have a valid profile that tests fine in sql agent and via sqlmail test buttons.2. I have logged in to the box under that new domain account toinstall outlook and configure all the remaining options.3. I have set both the mssqlserver service and the sqlserveragentservice to run under the domain account that coincides with our pop3email server, and restarted both of them.4. I have installed outlook 2002, and I can send and receive emailsjust fine from our sql server.5. As soon as I try to test an email from within a job, the testfails.All I wanted to do was just be notified if a job fails. The amount oftime lost on what should have been a 30 minute project isunbelievable!!!If anyone has some suggestions, other than the obvious, please let meknow.Thanks,Dave
I have attempted to report out errors at the end of an ETL process by alerting supporting DBAs of errors using the SSIS "Send Mail Task". Task completes along with the sequenced packages, but does not mail anything out. No logic at this time for trigger, just success from the previous task triggering the task to send mail. I also get no errors in the output, and I get no output indicating the send mail task fired, but it does go "green". Do I have to enable database mail and have privileges?
Component Configuration:
SMTP Connection Manager - SMTP Server: arsocex02
Send Mail Editor -
From: messerj@arsocdev.bdev.lab.mil To: sanderss@arsocdev.bdev.lab.mil MessageSourceType: Direct Input Expression: MessageSource = "Package>>> " + @[System:ackageName] +" was executed at>>> " + (DT_WSTR, 40) @[System:tartTime] + " by user>>> " + @[System::UserName] + " on Machine>>> " + @[System::MachineName] + " Errors reported to ERRORS_COURSE_CLASS_STATUS_T: " + (DT_WSTR, 50) @[User::ErrorCourseClassStatus]
I have a DTS that imports data from an orcle database into SQL Server. Doesn't the processing mostly occur on the SQL Server, not on the oracle database from which the data is being imported? The oracle database is vendor provieded and they are saying our SQL Server DTS package is killing their server. Any insight is appreciated. Thanks
I've got a process that creates records in my database based on XML input that I've gotten. What I am doing it giving this XML to a stored procedure to handle a specific task, then modify the XML and send it to the next stored procedure.
For instance, the XML could hold header records with detail records, I would first send the XML to a stored procedure that creates the header records, then updates the XML so the XML now knows the identity values of the header records I have just created, and then send the XML to the next stored procedure to create the details for those headers.
All works great and fine, but I have a problem with writing the identity values back to the XML. It seems I can only change one item in the XML at a time and thus need to loop this. For many records this really takes a long time.
Here is some sample code of what I'm doing (please excuse any typos, this is a simplified version of the code) :
declare @lvSeq numeric(15) declare @lvRowNo int declare @lvNumRows int
insert into myHeaderTable ( recid, recdesc ) select ref.value('@recid', 'nvarchar(25)') recid, ref.value('@recdesc', 'nvarchar(250)') recdesc from @pXML.nodes('//headers/header') R(ref)
select @lvRowNo=1, @lvNumRows = @pXML.value('count(//headers/header)', 'int') while (@lvRowNo<=@lvNnumRows) begin select @lvSeq = recseq from myHeaderTable where recid = @pXML.value('//headers/header[position()=sql:variable("@lvRowNo")]/@recid)
set @pXML.modify('replace value of (//headers/header[position()=sql:variable("@lvRowNo")]/@recseq with sql:variable("@lvSeq")')
select @lvRowNo=@lvRowNo+1 end
Obviously I am looking for a better way to update the XML with the sequences. The insert takes a second, the loop takes minutes with large XML sets. I guess MSSQL is searching the whole XML to find the item to update.
It would be nice if I didn't have to loop through the XML. One solution I was thinking off is to store the XML in a temporary table with a single record per header item. Then I could do the modify in one go and recreate the XML by simply selecting the contents of the temporary tabel. I have no idea if this is possible.
So something like this:
select ref.value('@recid','nvarchar(25)') recid, ref.value('.','XML') XMLData -- this gives an error into #TMP_XML from @pXML.nodes('//headers/header') R(ref)
insert into myHeaderTable ( recid, recdesc ) select recid, ref.value('@recdesc', 'nvarchar(250)') recdesc from #TMP_XML CROSS APPLY XMLData.nodes('/header') R(ref)
update #TMP_XML set XMLData.modify('replace ....') from myheadertable where #TMP_XML.recid = myheadertable.recid
Hello friends, I needed a suggestion, I am currently working on a reporting website that generates reports and i need to store all the reports in the database.
I usually go by row wise processing as it can be easily controlled but the problem is there will be a lot of reports, that is an estimation of 30,000 rows in a month and i m not sure if sql server can hold more than 2 billion rows per table.
I will just explain whole scenario what I m facing in tricky problem..
We have xml files coming at regular interval by some other source into sql server 2000…daily having records near @10000 to 70000…we have job scheduled to run it regular interval…we doing this by some filter criteria… suppose the flow is like staging table into secondary table and then final into primary table…. We design DTS package accordingly means take the records from staging table put into secondary table and then into primary table…(near @ 8 task involved in it…) Suppose xml file came at 8:30 am and our DTS package will run at 9:00 am…and then 11:00 am and the 1:00 pm like that….what I observing from many days is that after running job at 9:00 am successfully some good data still pending in secondary table not processed into primary table. But when again job ran at 11:00 am it processed that pending good records into primary table…some times when I ran this job manually through DTS design level the good data that pending in secondary table processed!!!
My question is that why this job not processed all the good records in single shot????
