Maint Plan - Failed To Acquire Connection Local Server Connection
Feb 15, 2008
I created a single step plan that does integrity checks. It fails with the error below. I created a new connection using our clusters virtual sql name.
Executed as user: ACCTCOMsqlagent. ...n 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:10:06 PM Error: 2008-02-15 13:10:49.02 Code: 0xC00291EC Source: {0CF32F3D-A8D1-492A-9C0F-AD4E0FC67D14} Execute SQL Task Description: Failed to acquire connection "Local server connection". Connection may not be configured correctly or you may not have the right permissions on this connection. End Error Warning: 2008-02-15 13:10:49.02 Code: 0x80019002 Source: OnPreExecute Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. End Warning Error: 2008-02-15 13:11:31.26 Code: 0xC0024104 Source: Check Database Integrity Ta... The package execution fa... The step failed.
The agent and db are running under domain accounts and the job is owned by sa.
Thanks for your help.
View 13 Replies
ADVERTISEMENT
May 5, 2014
Occasionally I'm seeing the following error when tranlog or full backup maintenance plan is executing.
Failed-1073573396) Failed to acquire connection "Local server connection". Connection may not be configured correctly or you may not have the right permissions on this connection.
What is strange is that it goes away without any action from myself. We have a tranlog backup that is scheduled every hour. I had this error happen once in the middle of the night. It looks like the job was running fine because almost all the backups are there. I've searched and not found a resolution to this error. I checked the event log and don't see any issues and even tried rebuilding the maintenance plans.
View 7 Replies
View Related
Dec 17, 2007
hi all,
i got the error, when i run my package after deploy into the server machine;
i can able to run that package in my local machine, if i deploy it to the server or some remote machine, its not running, and rises error messages, that says cant accquire connection from the connection manager;
the problem might be with the login name and password; i could not see any password in any of my config file, or connection manager while running the package.
how to resolve this problem?? please help me!
View 6 Replies
View Related
Jan 22, 2006
Hi, I have an SSIS project, has a connection to tempdb (local sql2k5 server), 3 tasks, creating a table, populating the table, then deleting the table. of course when I test the connection i GET TEST Succesfull (I amusing sa ...)
Whenever I run the package, all tasks become red colored indicating, I get the following error :
---------------------------------------------------------------------------------------------------------------------------
[Execute SQL Task] Error: Failed to acquire connection "tempdb".
connection may not be configured correctly or you may not have the right permissions on this connection.vance
----------------------------------------------------------------------------------------------------------------------------
Any help would be appreciated. Thanks in advance
View 1 Replies
View Related
Nov 11, 2005
I am running the Sept CTP. I have created a SSIS package that pulls data from a text file and inserts into a database. When I run the package on the DB server it runs fine. I have moved the package the the web server (we are attempting to kick off the package from a web site) and we get connections errors. We are running the package using dtexec from the command line.
View 7 Replies
View Related
Aug 20, 2007
Hi all,
I am trying to run eight SSIS packs from within Integration Services > Stored Packages > File System and seem to get an error like the following on all of them:
"Failed to acquire connection "MyConnection". Connection may not be configured correctly or you may not have the right permissions on this connection.
I can run the packages without error from within VS and from within that location in Integration Services on the machine containing the the databases, but when I attempt to run them remotely I get that error. I am attempting this with full admin access on both machines, but the purpose behind these packages is for our developers to run them on individual databases whenever they need to. So I'm concerned that I may run into further access errors after this, but so far I can't find a reason why this connection would fail. Any ideas?
If I can supply more information please let me know. Thanks in advance for any information!
View 6 Replies
View Related
Jun 30, 2006
I have a simple SSIS package with three "Execute SQL Tasks". I am using ADO.Net Connection to execute SPs on a DB server.
When I execute this package It works fine. So far so good.
Now, I need to implement transation on this package. And problem starts now onwards. When I try to execute package after setting TransationOption = Required for the Sequence container which contains all the tasks, I get following error.
[Execute SQL Task] Error: Failed to acquire connection "NYCDB0008.Export". Connection may not be configured correctly or you may not have the right permissions on this connection.
"NYCDB0008.Export" is the name of the ADO.Net connection. I have been hunting for any solution but all in vain. I have tried changing all DTC settings on the dev as well as Database server.
Please respond if anyone has any solution.
Thanks!
Anand
View 24 Replies
View Related
Jul 26, 2006
How would one go about using an ODBC connection with SSIS. I'm trying to ETL some Sybase ASE data, but I get the error when I try it:
"cannot acquire a managed connection from the run-time connection manager"
This wasn't any help:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=169777&SiteID=1
View 1 Replies
View Related
Jul 13, 2007
My source files are in C:Process folder. File names are in the format proc*.csv
I am using foreach loop container to iterate over the files in folder "C:Process"
I have a user variable "filename"
The order of my tasks
ForEach - Data Flow task - File System Task
In Data Flow task, I have ole db source which should take the dynamic filename from user variable "filename". whats happening is when i give fixed filename, without foreach loop container the package is working fine.
with dynamic filename, I am not able to run the package because of ole db source Error - cannot aquire connection from connection manager.
Thanks for u'r help.
View 9 Replies
View Related
Apr 26, 2006
I am receiving an error on my master package that executes a number of other packages. The individual packages work fine when executed by themselves. However, I am getting the following error when I attempt to execute it from another package:
Error: Failed to acquire connection "conneciton". Connection may not be configured correctly or you may not have the right permissions on this connection.
Thanks in advance for your help.
View 1 Replies
View Related
Dec 7, 2006
This is my first time to deploy an asp.net2 web site. Everything is working fine on my local computer but when i published the web site on a remote computer i get the error "Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. Please make sure the user has a local user profile on the computer. The connection will be closed" (only in pages that try to access the database)
Help pleaseee
View 3 Replies
View Related
Apr 2, 2008
Let me set the stage of my testbed configuration: On Windows XP SP2, my default connection to the Internet is via wireless express card modem using EV-DO via Verizon Wireless. Let's call this connection A. I also have a traditional wireless network connection (802.11g) that is always enabled. Let's call this connection B. Connection A is always connected during normal business hours. Connection B is not and is often searching for a wireless network to connect to when nothing is in range.
Yesterday, connection B was continuously trying to connect to a wireless network not under my control, meaning that the connection was never established and notification messages continually popped up to complain of this fact. Over time, I've learned to ignore these messages and go on doing my daily work without much thought of the possible implications.
Then, things started to get odd. I was running our application, WebWatchBot, to perform some simple tests of various websites and servers, when I started to get messages from the application that database connectivity was lost, which is a message that pops up to inform the user that the connection is forcibly dropped by SQL Server. After a few moments, the connection to the database was re-established and the message went away. Since I was actually working with SQL Server, I thought it was an anomoly, so I continued on. Then, it happened again. And again. Then, I noticed that the "database connectivity lost" message started to coincide with the wireless connection's (connection B) inability to connect with a wireless network.
Why would this be happening? The database and application are on the same exact computer. The connection to the database is via ODBC drivers over tcp/ip, but why would connection B affect this?
Some added information that may prove useful:
Client side:
What is the connection string in you app or DSN? (please specify)
DRIVER=SQL Server;SERVER=HIGHNOTEWEBWATCHBOT;Database=WebWatchBot;UID=sa;PWD=*****
If client fails to connect, what is the client error messages? (please specify)
[Microsoft][ODBC SQL Server Driver]Communication link failure
Is the client remote or local to the SQL server machine? [Remote | Local]
Can you ping your server? [YES | NO ]
In cmd.exe console, type €œping -a <server_name>€?.
Can you telnet to your SQL Server? [YES | NO, please specify the error message ]
In cmd.exe console, type €œtelnet <server name> port, where port can be 135, 445 or sql_server_tcp_port. If your cmd.exe console turns into a complete black screen with a cursor flushing on top left corner, you are connected. Type ctrl+€™[€˜ to bring up telnet prompt and type €œquit€? <enter>.
What is your client database provider? [SNAC | MDAC | ADO.NET1.0 | ADO.NET2.0| other (please specify] Or/And, what is your client application? [SQL Management Studio | SQL Profiler | Visual Studio | Other (please specify): WebWatchBot - Website and Server Monitoring Software
Is your client computer in the same domain as the Server computer? (Same domain | Different domains | WorkGroup)
What protocol the client enabled? [Shared Memory | TCPIP | Named Pipes].
Do you have aliases configured that match the server name portion of your connection string? NO
Do you select force encryption on server and/or client? NO
[2] Server side:
What is the MS SQL version? [ SQL Server 2005 | SQL Sever 2005 ]
What is the SKU of MS SQL? [Enterprise | Standard | Workgroup | Express (or MSDE) | other (please specify)].
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 2000.085.1117.00 (xpsp_sp2_rtm.040803-2158)
Microsoft MSXML 2.6 3.0 4.0 5.0 6.0
Microsoft Internet Explorer 7.0.5730.11
Microsoft .NET Framework 2.0.50727.832
Operating System 5.1.2600
What is the SQL Server Protocol enabled? [Shared Memory | TCPIP | Named Pipes ]. Use SQL Server Configuration Manager to configure it and check ERRORLOG or event log to confirm.
Does the server start successfully? [YES | NO] If not what is the error messages in the SQL server ERRORLOG?
If SQL Server is a named instance, is the SQL browser enabled? [YES | NO]
What is the account that the SQL Server is running under?[Local System | Network Service | Domain Account]
Do you make firewall exception for your SQL server TCP port if you want connect remotely through TCP provider? [YES | NO | not applicable]
Do you make firewall exception for SQL Browser UDP port 1434? In SQL2000, you still need to make firewall exception for UDP port 1434 in order to support named instance.[YES | NO | not applicable ]
[2a] Tool Used to Connect
What tool or Application are you using to connect to SQL Server (eg: Visual Studio, SQL Server Management Studio, SQLCmd.exe, OSQL, etc) and especially the version of SQL Server (Express, Workgroup, Standard, Enterprise, Developer)
[3] Platform:
What is the OS version? [Windows XPSP2 | Windows 2003 | Windows 2000 | Windows 98 | others (please specify ) ].
Do you have third party antivirus, anti-spareware software installed? [Symantec | Norton | other (please specify)].
View 4 Replies
View Related
Feb 6, 2008
I have a package that uses a for loop to iterate through an unknown amount of excel files and pull their data into a table. However, there will be cases when the file is corrupted or has some sort of problem so that either the transformation will fail or the excel data source will fail with an oledb connection error.
Could anyone suggest a clean way to trap these errors? Specifically, the "Cannot Aquire Connection from Connection Manager", which is the excel connection.
Thanks,
John T
View 3 Replies
View Related
May 31, 2006
In the custome source Component
At the Runtime execution, Accquire Connection is getting called 3 times, why does that happen so many times, is there any way possible to restrict it to once?
thanks in advance
View 1 Replies
View Related
Jul 3, 2006
Hi there,
We have an SSIS package, that when run though BIDS, runs to success.
However when running as a SQL Agent Job the following error is logged: "The AcquireConnection method call to the connection manager "Data Source" failed with error code 0xC0202009."
The package does use a configuration file as well as protection level of EncryptSensitiveWithPassword. The correct username and password are kept in the config file.
How do i fix this? The only thing i find in the KB is a solution telling me to use a config file and EncryptSensitiveWithPassword, both of which i already do.
Thanks
View 5 Replies
View Related
May 16, 2007
Sir i am trying to connect sql from my LAN to my networked computers but whenever i tried to register it through Enterprise manager i get following "SQL Server registration failed because of the conection failure displayed below.Do you wish to Register anyway? Login failed for user 'SW17/Guest'
where SW17/ is my another computer name...
i have checked tcp and named pipes
and confirm username for sql authentication too
please help me as i being late submit my project
View 3 Replies
View Related
Dec 8, 2006
hi
As I trun Work offline - true, my connection manager for log file says-it cant acquire connection while work offline is true.Where as other oledb connections work fine.
Even it tried to get around by putting DelayValidation as true, but didnt work.
Is there is anyother setting that has be set.
Thanks and Regards
Rahul Kumar
View 6 Replies
View Related
Nov 22, 2007
Hi
i can install and run my package in my development system work fine.
The same package when i was installing in the production system error
error: the acquire connection method call to the connection manager "con name" failed with error code
0xc0202009
I used sql server authentication and
tried the protection level
both encrypted password protected and sensitive with user key
Ezhil
View 4 Replies
View Related
Sep 27, 2007
I'm getting an intermittent error 'DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER' when attempting to connect to an Access mdb. We have a weekly package that fails almost every other week. The package uses a FileSystem task to copy an Access mdb which we use as a template. It has a single table structure which is empty. The FileSystem copy task creates the 'clone' in a different folder with a new file name. The new file name has the current date embedded in it. The next task is a DataFlow task which fills the single Access table with data. It uses an OLE_DB connection to the Access mdb. Since the destination mdb is created at runtime in the FileSystem task, I have set the DelayValidation = True for the DataFlow task. The package is called from a 'master' package via an Execute Package Task. The master package is launched from a web application. Interestingly, when I use the 'restart from checkpoint' feature it restarts the package at the DataFlow task and runs it successfully. I have used the 'restart from checkpoint' after each failure and it has always worked. When I try to isolate the problem in a test package I am unable to reproduce the error. Our SqlServer version is Enterprise Edition (64-bit) with SP2.
Anyone have a similar experience? Thanks in advance.
View 6 Replies
View Related
Mar 4, 2008
Hi All,
We are using the Windows Task Scheduler as a substitute for the SQL Server Agent, which isn't available in the Express edition. The scheduled task just calls a batch file, which in turn, runs a stored procedure using osql with the -E option for a Trusted Connection.
SQL Server Express has been installed using the defaults, which means the service is running in the "NT AUTHORITYNETWORK SERVICE" account. The scheduled task we create is set to run using the "NT AUTHORITYSYSTEM" account.
Now we find that on Windows Vista (tested using Ultimate Edition) that the scheduled task fails to run the stored procedure until the machine is rebooted the first time after installing SQL Server Express. When I say "fail", I mean that the stored procedure isn't executed. The scheduled task however completes and reports no errors. On Windows XP, we do not run into this problem so I suspect it has something to do with the UAC in Vista?
We further found that after installing SQL Server Express and creating the scheduled task in the "NT AUTHORITYNETWORK SERVICE" account, the scheduled task (and stored procedure) runs fine WITHOUT requiring a reboot.
Can anyone explain why a reboot is needed to get SQL Server Express to run the scheduled task correctly under Windows Vista and the SYSTEM account?
Any help or thoughts greatly appreciated.
View 2 Replies
View Related
May 16, 2007
Hi All!
I'm writing a custom component in c# for SSIS and I have a problem with AcquireConnection...
I wrote this code:
public override void AcquireConnections(object transaction)
{
if (ComponentMetaData.RuntimeConnectionCollection[0].ConnectionManager != null)
{
ConnectionManager cm = DtsConvert.ToConnectionManager(ComponentMetaData.RuntimeConnectionCollection[0].ConnectionManager);
ConnectionManagerAdoNet cmAdo = cm.InnerObject as ConnectionManagerAdoNet;
if (cmAdo == null)
throw new Exception("The ConnectionManager " + cm.Name + " is not an ADO connection.");
this.conn = cmAdo.AcquireConnection(transaction) as OracleConnection;
}
but the 'conn' is ALWAYS null...
I tried
this.conn = ((IDTSConnectionManagerDatabaseParameters90)cmAdo).GetConnectionForSchema() as OracleConnection;
too, but no result: the 'conn' is null again...
If I use oledbconnection or sqlconnection instead of oracleconnection the method works fine... I really don't understand
could you help me plz?
View 6 Replies
View Related
Mar 1, 2006
I'm getting "Access denied" error when I try to connect to SSIS from my desktop (Database Engine is fine). I'm a member of sysadmin within SQL, as well as an administrator on the server. I don't have any problem when I log on to the server directly via Remote Desktop and open SSIS.
I went into the surface area config tool, and I see that Database Engine and Analysis Services both expand and have a sub tabs to enable Services and Remote Connections, but Integration Services does not expand to a Remote Connections option, just Services. We're running MSDN Enterprise edition.
Does it matter if all the SQL services are using "Local System" for the logon ? I use an administrative logon on my SQL2000 boxes, and was fiddling with them on the 2005 box yesterday, but it seemed to cause more problems, so they are all Local System for now.
Am I missing something obvious ?
View 3 Replies
View Related
May 19, 2008
Hi. I'm (very) new to SQL Server. I have run into what seems to be a very common problem, judging by the number of Google hits, but it's not actually in the FAQs here, as far as I can see.
Situation
I installed SQL Server Express with Advanced Services 2005 on my Windows XP Pro laptop, using (with one exception) the default install. The exception was to put the data files on a separate partition (D: ) where I have more free space.
SQL Server Management Studio Express connects happily, and I set up a single data import table.
Issue: bcp Fails to connect to default local instance
I initially tried bcp in output mode, prior to working in earnest on importing my data. However the command line-
bcp MyDatabaseName.dbo.UserProfile out UserProfile.txt -T -c
Fails with the error-
Error = [Microsoft][SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server [2].
As I understand it, the local instance of SSE is the default, and should use a local (shared memory?) connection. This seems to work for Management Studion Express, but not bcp.
While investigating this problem, I tried enabling remote connections (all types) through the Surface Area Configuration wizard, and found that remote connections using either of:
bcp eSpacePh1.dbo.UserProfile out UserProfile.txt -T -c -S localhostsqlexpress
bcp eSpacePh1.dbo.UserProfile out UserProfile.txt -T -c -S mycomputernamesqlexpress
both work ok.
Extra Info
When starting Management Studio Express, it says something like "Configuring environment for the first time". However it says this every time it is started, not just the first run after installation, does this indicate some configuration data is not being successfully stored?
I have found threads that look similar to my issue-
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=836670&SiteID=1
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=3351349&SiteID=1
However these do not relate directly to bcp, and to be honest my knowledge of SSE is slender enough at this stage that i'm unsure if there are really relevant.
Any hints on how to proceed much appreciated.
Regards: Colin E.
View 6 Replies
View Related
Jun 7, 2007
Hi,
i am getting this exception i.e."
The TCP/IP connection to the host has failed. java.net.ConnectException: Connection timed out: connect" whenever i try to connect to the remote DB which is present at a different system.
View 2 Replies
View Related
Feb 14, 2008
Hi All,
I am getting the following error if I am using the package "Transaction Option=Required" while running through Sql Job:
The AcquireConnection method call to the connection manager "<connection name>" failed with error code 0xC0202009.
while I running the SSIS package on BI environment, I am getting the following error:
[Connection manager "<connection name>"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
I know the alternative solution is to make the "Transaction Option=Supported", but in my case I have run the whole flow in a single transaction. I came to know that this has been fixed in the service pack1(ref. to http://support.microsoft.com/kb/914375). FYI.. some time it was running successful.
I have taken all the necessary step to run the SSIS package in a distributed transaction(like the steps for MSDTC) and also created the package flow in a sequence.
I was going through the link - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=160340&SiteID=1 but all those didn't solve my problem.
If anyone can help me it will be great. or it is a bug in SSIS?
Thanks.
Jena
View 5 Replies
View Related
Sep 7, 2007
I am working in a distributed environment, I verified msgs have been successfully send from server1 db1 to server2 db2, but I still get the following error msg from the sender server through SQL profile:
Connection attempt failed with error: '10061(No connection could be made because the target machine actively refused it.)'.
Does anyone experienced the samething?
Thanks!
View 5 Replies
View Related
Mar 7, 2006
Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine. It alwayws works for me but after some minutes the other developer cant work in the application
He got this error
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
and When I see the log event after that error, it comes with another error.
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
He has IIS5 and me too.
I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
and in the connection string I have.
<add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SElevalencia.
Thats strange.
The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
If you want me to send logs please tellme
View 20 Replies
View Related
Nov 1, 2007
I know this is strickly not a website question, but dunno where else to post...To remotely admin and monitor some functions of the website, I wish to use a local application to connect to the MSSQL DB which is held on the remote webhosting serverI have the following code: Dim StrSQLUN As String = "[UN]"
Dim StrSQLPW As String = "[PW]"
Dim StrServer As String = "[IP][INSTANCE]"
Dim StrDB As String = "[DB]"
Dim strTimeOut As String = "Connection Timeout=0;"
Dim pStrSQLConn As String = "Server=" & StrServer & ";Database=" & StrDB & ";User Id=" & StrSQLUN & ";Password=" & StrSQLPW & ";" & strTimeOut
Dim sqlConn As New SqlClient.SqlConnection(pStrSQLConn)
If sqlConn.State = ConnectionState.Closed Then sqlConn.Open()
This has basically been take from the existing code on the website, but changing to the server details. I had just started dev'ing this app when the admins decided to move the SQL server over to a different server. It was working on the old one, but the new one doesn't. It just times out after whatever time you put in the timeout variable. 0=unlimited, and so just sits there.I am also using the MSSQL Server Management Studio locally to connect to the same database, and although slow, does connect after about a minute or so. I thought they would be using the same type of underlying connection to access the server and database? Is this correct?
Can they put restrictions in place for this specific sort of data access?Does anyone have any suggestions on how to resolve this issue??Thanks for any helpAdam.
View 2 Replies
View Related
Nov 28, 2007
Maintenance plan for bakcup is failing with "Login failed for user 'sa'. [CLIENT: <local machine>]"
I went to the Maintenance Plan and opened the Subplan. I clicked the "Manage Connections"
It has three tabs:
Name: Local Server Connection
Server: prod
Authentication: SQL Server Authentication
I clicked the Edit and it shows the Connection Properties:
It says: Enter information to logon to the server. "Use a specific Username and Password" is checked. Username is set as "sa" while the password is empty. I typed in the correct password and pressed Ok. When I go back again, the password still shows empty. I tried to run the plan and it again fails. Do you know why it is not showing the password as blank even if I try to save the password.
View 1 Replies
View Related
Dec 3, 2007
Hi,
I am running windows 2003 server with SQL Server 2000 SP4, both running on the same machine in our development environment. We are using anonymous authentication and the website is running in an application pool which uses a user account with access to the SQL server databases.
In our live environment, IIS and SQL are on different physical servers and we use a connection string containing a fully qualified domain name for the server name to connect in standard ASP pages (not .NET):
provider=sqloledb;Server=sqlserver.internal.companyname.net;Initial Catalog=<database name>;Trusted_Connection=yes
This works fine, but in development where both are on the same machine, I want to still use the same connection string, and point sqlserver.internal.companyname.net to my local computer, using a hosts file.
If I do this, I get the error "Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.".
If I use localhost, all is fine. If I use the machine name, all is fine. If on the same server in development I point sqlserver.internal.companyname.net to another server with SQL on it, all works fine.
But, I don't want to have to have different code in development and production and I don't see why I have to! Exactly the same setup worked on Windows 2000 advanced server, but now I am running 2003, it does not. Any help would be gratefully accepted.
Thanks,
Peter
View 6 Replies
View Related
Sep 17, 2015
I have a SQL Server 2014 installation on a server (CHRIS-PCCHRISSQL).I have SQL Server 2014 management studio installed on local server called Pootle.I have gone through the configuration on server (CHRIS-PCCHRISSQL) inc the following:
(1) I have set up a user on CHRIS-PCCHRISSQL called sqladminuser at server level with the Server Roles of 'Public' and 'SysAdmin'
(2) The computers are both on the same homegroup.
(3) On Chris-PC , I have opened up the firewall port 1433 as Inbound Rule
(4) On Chris-PC, Within SQL Server Configuration Manager,the 'SQL Server Network Configuration for Protocols for CHRISSQL' have been set up as follows:
- The TCP protocol is enabled
- I have set up IP2
as follows:
Active: Yes
Enabled: No
IP Addres: 192.168.0.3
However when I try to connect from SQL Server Management Studio 2014 on my local machine Pootle to Chris-PCCHRISSQL using SQL Server Authentication with the user sqladminuser
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)how to set up a remote connection from SQL Server Management Studio
on my local machine Pootle to CHRIS-PCCHRISSQL
View 6 Replies
View Related
Jun 19, 2007
Hello,
I have searched every post and tried every connection string there but can't figure out how to connect to my database on my remote server. I am using Visual Developer 2005 Express Edition in C# and uploading it to a Windows server running asp.net 2.0. The domain has not resolved yet.
I am so new to this and have followed many tutorials step by step but none of them address this issue. They just show how to upload it to the server.
Do I need to use the SQL server provided by my host or can the database stay in the App_Data folder?
My local connection string works locally:
<add name="ConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|add_newSQL.mdf;Integrated Security=True;User Instance=True"
providerName="System.Data.SqlClient" />
When I uploaded to my server I changed SQLEXPRESS to (local) as advised in the forum.
<add name="ConnectionString" connectionString="Data Source=(local);AttachDbFilename=|DataDirectory|add_newSQL.mdf;Integrated Security=True;User Instance=True"
providerName="System.Data.SqlClient" />
When I debug a page I get the <customErrors mode="Off"/>
error message even thought I have already set it in my remote web.config file which may be causing problems itself:
<configuration>
<appSettings/>
<connectionStrings>
<add name="ConnectionString" connectionString="Data Source=(local);AttachDbFilename=|DataDirectory|add_newSQL.mdf;Integrated Security=True;User Instance=True"
providerName="System.Data.SqlClient" />
</connectionStrings>
<system.web>
<customErrors mode="Off" />
<compilation debug="false" />
<authentication mode="Windows" />
</system.web>
</configuration>
Thanks for any help you can offer. I wish I could find someone to hire to do this part for me or teach me how over the phone. Any suggestions?
View 6 Replies
View Related
Mar 24, 2008
I am using SSIS 2005 on Windows 2003 server. Using Excel Source to dump the data for staging database.
I am getting following error while I execute it through BI studio's execute button.
Please help.
- Sachin
View 2 Replies
View Related
