Maintenance Jobs Failing SSIS Subsystem Failed To Load
May 1, 2008
Environment: SQL Server 2005 Enterprise Edition x64, 3 server cluster. Two active servers with seperate instances and one passive server. SQL Server was installed on the two active servers.
Problem: When I fail over either of my instances to the passive server in the cluster my maintenance jobs fail to run and there are error messages in the application event viewer "SSIS Subsystem failed to load". I am guessing that all of the needed components are not installed on the passive server? Is this a close guess? If so, exactly what components are missing and do you have to have another license to install them?
Thanks in advance for any advice.
View 2 Replies
ADVERTISEMENT
Mar 7, 2006
Greetings all,
After moving all my packages to a new server, win2K3, SQL2k5, non of the SSIS packages run. They all ran fine on the other server.
The error is
"2006-03-07 13:09:38 - ! [LOG] Step 1 of job 'ExportXML' (0x4E0C7495EFE4034FA6EF94B7C7F77262) cannot be run because the SSIS subsystem failed to load. The job has been suspended"
These packages ran perfectly on the old system.
Running the package manually, using DTExec or from the Saved Packages tree in SQL is fine.
Package is saved in SQL.
Any ideas?
View 3 Replies
View Related
Sep 2, 2002
Hi all,
I've just set up 2 new SQL 7.0 servers, and my new maintenance jobs - backups, optimisations, consistency check jobs etc - are all mysteriously failing. I've created them both with the Maintenance Wizard, and again by hand. I've attempted manual and scheduled runs. All to no avail. Nor do they populate the sysmainthistory table, although they're configured to do so. The mystery is that we have successfully installed some user DTS processes, and THEIR jobs work. In order to resolve the problem, I've:
(1) ensured the Agent service is running;
(2) ensured adequate space on the drive etc;
(3) verified that sqlmaint.exe exists in Mssqlinn;
(4) unchecked the 'attempt to repair minor errors' box (I read this was a known cause of the problem);
I've got some clues to go on, but nothing conclusive;
'sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.'
Executed as user: NT AUTHORITYSYSTEM. sqlmaint.exe
failed. [SQLSTATE 42000] (Error 22029). The step
failed.
Additionally, both servers hold databases that I imported from another server-INCLUDING the msdb, and BOTH have the same problems and same error messages. This cannot be a coincidence.
Anyone have any ideas?
Thanks in advance,
JB.
View 1 Replies
View Related
Jun 21, 2007
Hi
Recently I have moved sql 2005 from one box to another with bigger hdd space and more memory. Since then I am getting the attached error message when I Execute all the job.
View 4 Replies
View Related
Nov 28, 2007
Maintenance plan for bakcup is failing with "Login failed for user 'sa'. [CLIENT: <local machine>]"
I went to the Maintenance Plan and opened the Subplan. I clicked the "Manage Connections"
It has three tabs:
Name: Local Server Connection
Server: prod
Authentication: SQL Server Authentication
I clicked the Edit and it shows the Connection Properties:
It says: Enter information to logon to the server. "Use a specific Username and Password" is checked. Username is set as "sa" while the password is empty. I typed in the correct password and pressed Ok. When I go back again, the password still shows empty. I tried to run the plan and it again fails. Do you know why it is not showing the password as blank even if I try to save the password.
View 1 Replies
View Related
Sep 12, 2007
Hi,
DTS job fails with the following error, A Server (Windows 2003 SE with SP1) has 4 SQL Server 2000 instances with mixed of SP3 & SP4. But few jobs are failing in all the 4 instances.
Executed as user: DCADB04SYSTEM. DTSRun: Cannot create COM Server to load and execute DTS Package. Error -2147221008 (800401F0): CoInitialize has not been called. Process Exit Code -2147221008. The step failed.
Appreciate you suggestion to fix this,
regards,
Arul
View 1 Replies
View Related
May 4, 2007
I have a dataflow step (flat file -> Sql Server Destination), with a batch size of 2500 records. It fails consistently around 3.6 million records in, with only this error -
[SQL Server Destination [4076]] Error: Unable to prepare the SSIS bulk insert for data insertion.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SQL Server Destination" (4076) failed with error code 0xC0202071. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0202071. There may be error messages posted before this with more information on why the thread has exited.
[Flat File Source [1]] Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
How can I debug this further to see what's going wrong?
View 1 Replies
View Related
Aug 8, 2007
Background€¦
We€™re receiving the data as flat files, when I open up the file in notepad the characters look like the error€™d examples (see below). Open the file up in a texteditor where you can apply code page 1252 it display the characters correctly, which is expected behaviour!
I use SSIS to load these files into my database, applying the correct code page€¦
€¦however the data gets loaded in the incorrect form. Plus the database is collation €˜SQL_Latin1_General_CP1_CI_AS€™ which is code page 1252 so I can€™t see why I am getting these issues.
This is an example of the Umlaut (German chars) issues were getting, they€™re appearing in the database like this€¦.
tuid travelproductid lastname
1741869 6 P€?hls
1792950 6 Sch€žfer
2087798 6 L€?schhorn
2089010 6 Sagemller
2314086 6 Jnger
€¦& should be€¦
1741869 6 Pöhls
1792950 6 Schäfer
2087798 6 Löschhorn
2089010 6 Sagemüller
2314086 6 Jünger
I think it€™s a bug with SSIS, I know having a Unicode file would certainly solve this but I don't have that option.
View 9 Replies
View Related
Aug 5, 2015
I have created simple package loading data from source to destination.in BIDS working fine, but when i created job through sql server agent job I am getting below error.
Error:- The Job was invoked by User . The last step to run was step SQL AGENT JOB.
View 6 Replies
View Related
Jul 20, 2005
DB is 150GB and I cannot take it offline long enough to apply logs to a back up.I am moving from one sub storage system to another.Any mirroring ideas?Thanks
View 1 Replies
View Related
May 19, 2006
Hello,
I have a big problem and i'm not able to find any hint on the Network.
I have a window2000 pc, VS2005,II5 and SQLServer 2005(dev edition)
I created an SSIS Package (query to DB and the result is loaded into an Excel file) that works fine.
I imported the dtsx file inside my "Stored Packages".
I would like to load and run the package programmatically on a Remote Scenario using the web services.
I created a solution with web service and web page that invoke the web service.
When my code execute:
Microsoft.SqlServer.Dts.Runtime.Application.LoadFromDtsServer(packagePath, ".", Nothing)
I got the Error:
Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
The error message doesn't help so much and there is nothing on the www to give me and advice....
Is it a SSIS problem???
Thank you for any help!!
Marina B.
View 10 Replies
View Related
Apr 30, 2008
Hi, I am trying to create a maintenance plan on an MSX server and push it out to a TSX server. When I try to run the job on the TSX server it goes into suspended status.
If I look in the SQLAGENT log I see the following error
2008-04-30 15:04:11 - + [125] Subsystem 'SSIS' could not be loaded (reason: This function is not supported on this system)
2008-04-30 15:08:19 - + [125] Subsystem 'SSIS' could not be loaded (reason: This function is not supported on this system)
2008-04-30 15:09:28 - + [125] Subsystem 'SSIS' could not be loaded (reason: This function is not supported on this system)
2008-04-30 15:27:36 - ! [LOG] Step 1 of job 'SystemDatabases.Back Up Database (Full) (Multi-Server)' (0x97394B08F6599040A18D93367FBDB5F7) cannot be run because the SSIS subsystem failed to load. The job has been suspended
2008-04-30 15:35:13 - + [125] Subsystem 'SSIS' could not be loaded (reason: This function is not supported on this system)
2008-04-30 15:50:27 - ! [LOG] Step 1 of job 'SystemDatabases.Back Up Database (Full) (Multi-Server)' (0x97394B08F6599040A18D93367FBDB5F7) cannot be run because the SSIS subsystem failed to load. The job has been suspended
my sql info is
Microsoft SQL Server 2005 - 9.00.3239.00 (X64)
Copyright (c) 1988-2005 Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)
any advice would be helpful
View 6 Replies
View Related
Aug 20, 2007
All:
I've implemented a variation of the Custom Logging provided in this post by Jamie Thomson.
http://blogs.conchango.com/jamiethomson/archive/2005/06/11/SSIS_3A00_-Custom-Logging-Using-Event-Handlers.aspx
Everything seems to work well on my desktop during development, but when I deployed the packages to our DEV environment the packages still execute, but I'm now receiving warning messages in the sysdtslog90 log table...
Precompiled script failed to load. Attempting to recompile. For more information, see the Microsoft Knowledge Base article, KB931846 (http://go.microsoft.com/fwlink/?LinkId=81885).
My log table (SSISLog) looks OK, with only OnPostExecute messages that include the package / task information and rowcounts.
The KB article suggests upgrading to SP2, but I'm well past SP2, using Build 3159 on both machines.
Any suggestions on how to get rid of the warnings?
Thanks!
Leda
View 2 Replies
View Related
Jun 15, 2007
I'm getting this, after upgrading from 2000 to 2005.Replication-Replication Distribution Subsystem: agent (null) failed.The subscription to publication '(null)' has expired or does notexist.The only suggestions I've seen are to dump all subscriptions. Sincewe have several dozen publications to several servers, is there adecent way to script it all out, if that's the only suggestion?Thanks in advance.
View 3 Replies
View Related
Dec 20, 2007
I was hoping if someone can help me shed some light on the following error messages -
Some of the billing jobs in SQL are failing, here is the message from application log - This is happening on the production server.
"SQL Server Scheduled Job 'Transaction Log Backup Job for DB Maintenance Plan 'DB Maintenance Plan3'' (0x8BCD2C33DF5EC447BC7F1228E2C455E4) - Status: Failed - Invoked on: 2007-12-20 06:00:01 - Message: The job failed. The Job was invoked by Schedule 54 (Schedule 1). The last step to run was step 1 (Step 1)."
Has anyone seen this message before, whats a way to fix this issue.
Nishi
View 2 Replies
View Related
Nov 20, 2001
Hi, I recently migrated from SQL*Server v7.0 to v2000. The maintenance routines on the new v2000 was set up (this is also a new server - completely new machine) are not running. When they attempt to run, I get the following error:
[Microsoft][ODBC SQL Server Driver][SQL Server]Repair statement not processed. Database needs to be in single user mode.
Consequently, no backups no repair, the only thing in the maintenance routine that does work is the rebuilding of indexes. Any ideas would be greatly appreciated.
Thanks in advance,
Nancy
View 4 Replies
View Related
Jan 26, 2001
Hi. I'm using the db maint. plan to do database & trans.log backups, and it's failing on my databases that are set to use the 'simple' recovery method (similar to 'trunc. log on checkpoint'). The SQL Agent job then shows up as failed, although what's really happened is that it's just skipped over the databases that are in that mode.
To clarify this, regular database backups complete successfully, while trans.log backups fail due to the databases set to simple recovery.
Does anyone know how to 'fix' this?
Thx,
Larry
View 2 Replies
View Related
Apr 1, 2008
Hello. I setup a new maintenance plan for my SQL2005 SP2 server to do a full backup and transaction log backup on all databases (System and 3 User defined).
Every time I execute the maintenance plan, I get the following error in the job history, and no backups are made:
Message
Executed as user: AD-ENTMKTSQLService. ...00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 12:13:35 PM Error: 2008-04-01 12:13:45.09 Code: 0xC00291EC Source: {AE791AB6-1317-4803-9C53-444B45DAD533} Execute SQL Task Description: Failed to acquire connection "Local server connection". Connection may not be configured correctly or you may not have the right permissions on this connection. End Error Warning: 2008-04-01 12:13:45.09 Code: 0x80019002 Source: OnPreExecute Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. End Warning Error: 2008-04-01 12:13:45.14 Code: 0xC0024104 Source: Back Up Database (Full) ... The package execution fa... The step failed.
_____________________________________________________
The MKTSQLSERVICE account is the account setup for the SQL Server Agent Service to use, is in the Administrators group of the server OS, and has been granted SA in SQL2005.
What am I missing???
Thanks!
View 4 Replies
View Related
Jun 27, 2000
I have created DTS packages to export data to text files....these packages are
running...the jobs that are created to run these packages are failing ...
both the SQL SERVER and the SQL SERVER AGENT are running administrator accounts ...if the job step is run on the command line it works..so basically
some permission that invokes the the command shell is missing...jobs that run just T-SQL steps work fine too....what am i missing out?
View 1 Replies
View Related
Dec 14, 2005
I have a DB Maintenance plan created that performs optimizations, integrity checks, and a database backup. The optimizations and integrity checks work fine, but the backup job fails. The backup job is to write the .bak file to a network share.
When I change the owner of the job to "sqluser", the job fails at step 0 withe the following error:
The job failed. Unable to determine if the owner (rsnsqluser) of job DB Backup Job for DB Maintenance Plan 'Online Database Server Maintenance Plan' has server access (reason: Could not obtain information about Windows NT group/user 'rsnsqluser'. [SQLSTATE 42000] (Error 8198)).
Checked with the system admin for this server and sqluser has priviledges to do everything, including write to the network share.
So, now I change the owner of the same maintenance job from sqluser to "sa". I now get this error:
Executed as user: RSNsqluser. sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
Checked the settings for MSSQLSERVER and SQLSERVERAGENT in Control Panel. Everything seems to be in order according to the other threads I have read.
For grins, I tried to ensure the sqluser password on the SQL Server Agent was correct. When I try to enter the new password I get this:
sql server agent startup account could not be verified
I click yes (it asks if I want to continue anyway).
Is the password not being registered properly in the agent?
One other thing, the sqluser user is listed under Security|Logins as connecting with Windows Authentication. We have several other servers that are set up the same and work fine. What am I missing? I'm pulling my hair out! :eek:
View 6 Replies
View Related
Jan 17, 2005
Hi there,
I have a Database maintenance plan (DMP) that always fails!
The plan reorganises data and index pages and checks database integrity.
The plan covers several databases, and it always fails on the same database.
The error message (in the DMP history) is the following: "[Microsoft SQL-DMO (ODBC SQLState: 01000)] Error 0: This server has been disconnected. You must reconnect to perform this operation."
The odd thing is that the DMP is locally executed, so I don't see why the network could be an issue here.
Thank you for your time!
gilles25
View 1 Replies
View Related
Jul 27, 2001
When I change the SA password on my server the current Scheduled SQL Jobs no longer work. If I run DTS packages by themselves and not from the Scheduled job window they work fine. I am using the sa as the Owner of the jobs and my SQL Agents services use a Domain Account. If I rebuild the jobs after the sa password is change they work fine. However, I don't want to rebuild 100 jobs every time I change my SA password.How can I fix or get around this problem without rebuilding my jobs?
View 5 Replies
View Related
May 2, 2002
I just had 2 DTS job fail, that had been running fine for weeks. Any ideas why these would fail when nothing about the jobs has changed ? Other jobs with the same owner ran OK.
Here's the message from DTS #1 Job History:
DTSRun: Loading... DTSRun: Executing... DTSRun OnStart: DTSStep_DTSDataPumpTask_1 DTSRun OnError: DTSStep_DTSDataPumpTask_1, Error = -2147467259 (80004005) Error string: Error opening datafile: The referenced account is currently locked out and may not be logged on to. Error source: Microsoft Data Transformation Services Flat File Rowset Provider Help file: DTSFFile.hlp Help context: 0 Error Detail Records: Error: 1909 (775); Provider Error: 1909 (775) Error string: Error opening datafile: The referenced account is currently locked out and may not be logged on to. Error source: Microsoft Data Transformation Services Flat File Rowset Provider Help file: DTSFFile.hlp Help context: 0 DTSRun OnFinish: DTSStep_DTSDataPumpTask_1 DTSRun: Package execution complete. Process Exit Code 1. The step failed.
And here's the message from DTS #2 job history:
... DTSRun: Executing... DTSRun OnStart: Delete from Table [TI].[dbo].[Sheet1$] Step DTSRun OnFinish: Delete from Table [TI].[dbo].[Sheet1$] Step DTSRun OnStart: Copy Data from Sheet1$ to [TI].[dbo].[Sheet1$] Step DTSRun OnProgress: Copy Data from Sheet1$ to [TI].[dbo].[Sheet1$] Step; 117 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 117 DTSRun OnFinish: Copy Data from Sheet1$ to [TI].[dbo].[Sheet1$] Step DTSRun OnStart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_1 DTSRun OnStart: DTSStep_DTSExecuteSQLTask_2 DTSRun OnError: DTSStep_DTSExecuteSQLTask_2, Error = -2147467259 (80004005) Error string: Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error Detail Records: Error: -2147467259 (80004005); Provider Error: 18452 (... Process Exit Code 1. The step failed.
View 2 Replies
View Related
Jul 9, 2007
Hi. I was wondering if anyone has ever had a problem where nothing seems to be wrong with the server, and SQL Server Agent is up and running, but jobs fail. We had a job run at midnight, and it was the last successful run. Every job failed after that, with an error stating "Unable to retrieve steps for job..." There doesn't seem to be any reason for the problem. The jobs were kicked off manually and they all ran.
The only other error messages we could find were in the Application Event Viewer on the server. But the first error happened days ago and said this: "The description for Event ID ( 0 ) in Source ( .NET Runtime ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Unable to open shim database version registry key - v2.0.50727.00000."
Since then, every few seconds this error occurred: "Windows cannot load extensible counter DLL MSSQLServerOLAPService, the first DWORD in data section is the Windows error code."
We turned off the performance monitor counters and that error stopped. But we still have no idea if that was the cause of the problem.
This isn't the first time we've had an issue with jobs failing because the steps couldn't be 'found', while SQL Server Agent was up and running.
Has anyone else had this problem?
Thanks!
View 1 Replies
View Related
Aug 10, 2007
I am migrating the SQL server 7 to SQl server 2005 (side by side upgrade).... I copied all the jobs including the maintenance jobs .is that the right way ?
do we need to copy the maintenance jobs as well ???
or do we have to create the maintenance plan which will create the new jobs itself ????? please Guide ....... its urgent ....
thanks in advance !!!!!
View 3 Replies
View Related
Apr 10, 2006
I have developed a SQL Server 2005 Integration Services (SSIS) package that includes a Script Task on a 32-bit machine. The PrecompileScriptIntoBinaryCode property is set to True. After I build the package, the .dtsx file includes a <BinaryItem> element for that Task. Package runs fine on the dev machine, both in BIDS and as SQL Server Agent job.
When I deploy the package to a 64-bit server, it runs fine when I execute the package ad hoc from SQL Server Management Studio. However, when I schedule the package for execution as a SQL Server Agent job, the package fails with the message: "the script files failed to load."
I have reviewed posts on this error from late 2005, but the solutions don't work in this case. Specifically:
1. The Precompile property is already set to True.
2. I have already verified that the script was compiled.
Any further suggestions?
View 1 Replies
View Related
Oct 7, 2005
Recently I created a new db in production and restored it from test. Ihave a nightly backup job that backs up all user databases. The backupfor this new db is failing.The message in the error log is2005-10-04 00:13:47.65 backupBACKUP failed to complete the command BACKUP DATABASE [MTUDD_GEMINI]TO DISK = N'd:sqldataMSSQLBACKUPMTUDD_GEMINI MTUDD_GEMINI_db_200510040013.BAK'WITH INIT , NOUNLOAD , NOSKIP , STATS = 10, NOFORMATI notice that the file name seems to have a space in it between thedatabase name and the end of the backup _db and a space also appears atthe end of the directory name.I can perform a backup successfully using the backup task under alltasks under the database via Enterprise Manager.Anyone seen this? Any suggestions other than backuping up the dbmanually, dropping the database, recreating it, and restoring it fromthe backup?-- Mark D Powell --
View 3 Replies
View Related
Jul 25, 2000
Using the maintenance planner wizard can create four jobs:
1. Backup DB
2. Integrity checks
3. Optimizations
4. Log backup
depending on what choices you make.
It appears to me that when the scheduled date/time comes,
that the jobs run as scheduled.
My questions are:
a. If I manually start one of the four jobs, will that job and
only that job execute?
OR
b. Will all four execute?
OR
c. Will the manual execution of a specific job cause the other
jobs to be executed also?
Any insight into how this function works is much appreciated!!!
View 1 Replies
View Related
Mar 18, 2008
Hi:
2 SQL2000 ent sp4 servers.
Try to 'one step' to export all jobs and related maintenance plans from serverA to serverB, via backup msdb from A and restore to B.
After restore msdb to serverB, I saw all jobs and related maintenance plans, but the jobs are not runable.
Do I have to save jobs scripts one by one from A, then rerun on B one by one?
thanks
David
View 8 Replies
View Related
Sep 23, 2014
SQL 2012 Standard on Windows Server 2012 Standard
After observing brute force attacks on our VPS myhosting instance against the SA login, I change the SA login name. Now my two new backup jobs are failing. The agent service logs in as NT ServiceSQLSERVERAGENT. Nothing changed there (so far as I know and I'm the only one who should be on the VPS). The job owner was SA and after changing the SA account that was reflected in the SSMS gui; job owner 'newsaname'. I'm sure I can just rebuild the maintenance plans but I'd like to know what happened.
Also, I would like to learn more about the brute force attacks and how to determine what port they are comming in on. I see an IP address associated with them. Does that mean they are coming in on 1433 or 1434?
SQL 2012 Standard VPS Windows 2012 Server Standard
View 3 Replies
View Related
Mar 9, 2006
Hi,
I'm working with SQL 2000 and am just learning about Maintenance Plans (MP). They seem convenient, but after some time, I'm wondering if they're the best approach long-term. Here are my experiences.
Using the MP Wizard, I created a plan with tasks from all the dialogs:
- Optimize database
- Check integrity
- Backup database
- Backup transaction log
- Write a report
I was puzzled to find 4 jobs were created, each with just 1 step, and staggered starting times. I expected to find 1 job with 4 steps. So, brimming with confidence, I did just that. I combined all 4 into 1 job, deleted the 3 other MP created jobs, and checked for any job-specific details in the code. However now when I open the MP, I get this pop-up:
"One or more of the jobs created for this plan has had additional steps added to it. It is not recommended that jobs created by the maintenance plan be modified in any way."
Okay, fair warning. Yet it appears the job and all steps run successfully, both on demand, and on a schedule. So now I'm wondering if jobs always need a MP. If I don't mind working with xp_sqlmaint syntax, it appears the only thing I'm giving up is the MP history. But I expect job history and '-WriteHistory' will minimize that loss.
I searched BOL, this Forum, and Google, and found a couple articles. One author preferred the ease of the Wizard, another preferred the control and added features of T-SQL, but both created a MP in their examples. So I'm hoping some experienced DBAs can advise.
If I create a job with multiple steps, and no MP, are there important things I give up or problems I create?
Is this approach a bad idea in SQL 2005?
At this stage, I don't need replication or other advanced features. Just simple database maintenance.
Thank you,
- Martin
View 1 Replies
View Related
Mar 6, 2015
One of my programmers changed their database from full to Simple recovery. Saw that my job that backs up the Full Recovery mode databases failed, so I moved that database to my Simple database backup job plan and removed it from the Full Recovery job. I am unable to remove the db from the Transaction Log task on the Full Plan because when I try to edit that job "Databases with Simple Recovery will be excluded"
My transaction log backups are still failing with the following error: "The statement BACKUP LOG is not allowed while the recovery model is SIMPLE. Use BACKUP DATABASE or change the recovery model using ALTER DATABASE. BACKUP LOG is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Just want to remove that database so my Full Recovery backup job does not try to back it up.
View 2 Replies
View Related
Jun 11, 2007
I have a Integrity Checks Job for DB Maintenance Plan 'Reindexing and shrinking' that failed. I looked at the log. But i can't see any error. Anyone know how to troubleshoot it?
p.s. This job has been created by the wizard.
EXECUTE master.dbo.xp_sqlmaint N'-PlanID 41A03C18-EA63-49FE-A29B-40EE0D681017 -Rpt "D:Program FilesMicrosoft SQL ServerMSSQLLOGReindexing and shrinking2.txt" -DelTxtRpt 2WEEKS -WriteHistory -CkDB '
=============================
http://www.sqlserverstudy.com
View 8 Replies
View Related
