Hi,
I want to create pckg with two data source,
the pckg will know to take data from the right DS after IF will check if getdate() returned endweekday it will take from DS1 else DS2.
I am using execute sql task to run a stored procedure in oracle database which returns a resultset. This works. Now I need to send the ouput to a destination table in a sql database. Should I use for each loop to pick the resultset and insert it into the destination one by one (which I dont think is a great idea) or is there a better way to accomplish this task (in data flow task) ?
When I use dataflow task instead of execute sql task, the main issue is I am not able to see the output columns when I execute an oracle stored procedure, but when I see the preview I can see the resultset . But I can see the output columns for a sql server stored procedure.
I have a knowledge of SISS and CRM 3.0 but don't get any proper steps to create such Integration Service in SQL Server 2005 using CRM 3.0 as external data source.
I don't get any option of external data source for CRM.
So if anybody know about this then let me know steps to do that.
My report works with XMLDP data provider and obtains source data as a result of a web method call. This memthod returns all data necessary for the report. Thus, all of about 20 report datasets query the same web method with the same parameters and then select appropriate data with different ElementPath expressions. It's so inefficient and time-consuming! I cant have respective web method for every dataset. How can I configure SSRS to call web method only once while the report is executing? Or how can I leverage the performance at all?
I have a custom component that takes in unicode stream and converts it to ascii text. However I would like to make my default string length and code page editable in the standard GUI editor. Right now I can set the default to 1000 characters, but when I try to change it, it says "Property value is not valid"
I was wondering what has worked for all of you in regards to using a sproc as a source within a dataflow. I have had limited success doing this, but maybe there is a workaround I'm unaware of. Basically, using a SQL command in an OLE DB Source, I run an EXEC statement that returns a resultset from a stored procedure. I've noticed that depending on how the sproc is structured, I will either get metadata info in the columns tab of the OLE DB Source or not. Without this metadata of course I can not link it with a destination, since the destination believes that no data is being returned, even if this is not the case. This all seems to depend on the "final" select statement in the sproc being at the very top of the sproc. If it is not at the top, the columns tab will not be populated. Has anyone else had similar issues? Is there a workaround other than populating a temp table outside of the dataflow?
Has anyone in here had luck using AD as a datasource? Big picture, we have an input file with unique identifiers (employee clock numbers) and I need to associate a clock number with an email address. The only place we have those two together is in Active Directory.
Currently, we have a lookup task with an OLE DB connection to our AD and a query that looks like
Code Snippet SELECT mail, clockNumber FROM 'LDAP://DC=company,DC=com'
I've mapped my input to the clockNumber in AD and all is well and good. I then go to thinking, perhaps it'd be better if I used that query as a source in an OLE DB component and used a Merge Join to make the link between the two. I paste that same query into a source component and boom
Code Snippet TITLE: Microsoft Visual Studio ------------------------------ Error at Create extracts [OLE DB Source [1226]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x00000000.
------------------------------ ADDITIONAL INFORMATION: Exception from HRESULT: 0xC0202009 (Microsoft.SqlServer.DTSPipelineWrap)
Is this just not something that a person can do or is there something I've set up incorrectly? I'd be lucky to be considered a novice with AD so I'm fine if someone has a better suggestion for retrieving this data, this was just something I'd cobbled together out of some forum postings.
I have to import dBASE files to SQL Server. For this I have created one ODBC connection manager for those dBASE files. This I have to set for DataReader Source. But I am unable to configure the DataReader Source.
So, Please tell me how to configure DataReader Source for ODBC connection Manager.
Eagerly waiting for your valuable reply............
I am trying to use an XML Source on xml data from an XML webservice, I am putting the document into a variable the trying to import the data from there with the XML Source, but I am getting an error telling me that truncation occured
The Error is "[XML Source [1]] Error: The "component "XML Source" (1)" failed because truncation occurred, and the truncation row disposition on "output column "linking" (1579)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component."
The linking column mensioned in the error is sometime quite a long string but there is nowhere in the XML Source editor to change the size.
I need to extract data from tables in a database that I can only access via ODBC.
I have successfully created a connection in Connection Manager (ConnectionManagerType = ODBC) for this database.
However I€™m unable to add this connection as a Data Flow Source. There is no ODBC Source option in the Toolbox.
This is a major because we have been using the system dsn Microsoft Visual Foxpro Driver to access free table directory .dbf files under ODBC with DTS for years. To install a new Microsoft OLEDB driver for foxpro is out of the question on a production system as it would cost many thousands of dollars to go through our BAT testing process
How do I extract data from tables in a database via ODBC?
I have problem to extract data from DB2 table using SSIS dataflow task with OLEDB source selecting the data access mode with command. Here is the scenario.(Note:If I select the data access mode as a table then it works fine.)
If I use the data access mode as SQL Command then it is not working. i.e. the flow stays yellow in controlflow nothing happens in dataflow and I noticed the SQL dumper and proc completes. I couldn't find any log to verify the issue including the package execution results.Any of your thoughts will help me to resolve this issue.
Hi, I am using SQL Server2005 for SSIS. I want to change the source connection dynamicaly evertime. Let me clear, I have to extract some column from excel to MS-Access. I am using Data Flow Task and able to successfully complete the job. But problem is that, whenever a new file comes , i must have to reconfigure my Excel Source. All the time column in file are same, so no need to worry about mapping but how can my package select a file automatically. I have a directory, suppose "C:dpak". I should able to pick the filename and sheet name from this directory every time when my package will execute.
I have implemented a custom source component that can be used as the data source in the Data Flow task.
I have also created a custom UI for this component by using the IDtsComponentUI .
But my component does not have the capability of setting the custom properties via the DTS Variables using the Expression Builder.
I have looked around for samples on how to do this, but I can only find samples of how to do this for custom Control Tasks, i.e. IDtsTaskUI.
My question is, How can implement the Expression Builder in my custom Source component + custom Source UI. Or do you know of any samples which I can look at.
I have implemented a package to load multiple files to a destination. Since the source was a txt file, i have created as flat file source. However now we are getting files in excel format as well.
Is there anyway the source gets changed dynamically based on the file extension, output of the foreach file enumerator? I can think one solution to have 2 dataflow tasks based on precedence constraining and expression one is for .txt and other one is for .xls.
I am using the "XML Source Adapter" in an SSIS package. I notice that although you can specify the XML filename as an expression, the XSD appears to have to be a fixed file path. This is a problem for me since the path for the XSD is different in my development than it will be in production (in production it's on drive E:, which I don't have).
I'd like to have the file location specified in the config file, but since I can't make it an expression how can I do that?
Also, since they don't have Connection Managers I can't switch DelayValidation on.
I need to execute a SQL query, inside a dataflow (not in controlFlow) and need the records returned to continue the dataflow... In my case I cant use lookup and OLE DB COmmand and nothing else...
I need to execute a query and need the records for dataflow... with OLE DB command I cant see the fields returned... :-(
How can I do it? Using a script? Can I use a Script Component? That receive 2 parameters for input and give me the fields returned from query as output?
, Hi In this code how can I create a new data source and new data source view and model and structure that it run dynamic. In this code I have a lot of errors, that they are about server and database don€™t have in current code, In this code, first I should definition server or no?
How can I create data source and data source view and model and structure? Please say code of that, and guide me. databasename and srv is unknown. Do I add other reference with analysis services? Please explain about these codes: ************************************************************************ 1) RelationalDataSource dsNew = new RelationalDataSource( datasourceName, Utils.GetSyntacticallyValidID( datasourceName, typeof(RelationalDataSource)));
I have set up a new connection as a connection from data source, but I cannot see how to use this connection to create my Data Flow Source. I have tried using an OLE DB connection, but this is painfully slow! The process of loading 10,000 rows takes 14 - 15 minutes. The same process in Access using SQL on a linked table via DSN takes 45 seconds.
Have I missed something in my set up of the OLE DB source / connection? Will a DSN source be faster?
I am having a Data flow task in For each loop which will gets 100 sourcetable names and 100 target table names...
am having a simpleData flow task which trasferes from OLEDBSource to OLEDBDestination. I am repeating the Dataflow task which transfers from sourcetablename extracted from for loop to a destination table var.
The problem am gettting is for the first table it is able to transfer correcly because I did mapping for those tables at design time...but for the next coming sourcetable-desttable (which r having different no of cols,datatypes) its giving Validation failed...and...needs to refresh metadata....
is there any way to refresh the metadata of Data flow task (I set the property of OLEDBSource validate external meta to false then also same error is coming)
hi everybody, i want to create data source and data source view for data mining, with using C Sharp. i have create data source and data source view and export to XML file, but when i change to another computer, run those XML file, it return error, when i run statement to create and biuld mining model, what can i change on xml or how to run XML on another computer sucessfully, and have i build data source and data source view, how to do it.?
Today I was making a few reports. When I tested the reports in Visual Studio, they worked great: I got the expected result. But when I deployed the reports to our reportserver the problem started. When I click on the directory in which my reports are deployed, I got my 4 reports. Till now everything worked correct. But when I click on a report to view the results it went wrong. I got an error: "Cannot create a connection to data source 'Live'" (Live is the name of our data source).
We are using the Windows Logons and I am sure that I have all the rights on the server, I gave myself 'sysadmin' rights, so it should work. I also have tried it with all the roles assigned on my account, but then it still won't work.
When I modify the data source, and set it to another server en database it works. The datasource 'Live' exists on a x64 MsSQL server, en the other datasource is on a x86 MsSQL server. Maybe that is the problem?
I was trying to load data using SSIS, Data Flow Task, OLE DB Source, source was a view to a OLE DB Destination (SQL Server). This view returns 420,591 rows from Query Analyzer in 21 seconds. Row length is 925. When I try to executed the Data Flow Task from SSIS, I had to stop the process after 30 minutes, because only 2,000 rows had been retrieved. I modified the view to retun top 440, 000 and reran. This time all 420, 591 rows were retrieved and written in 22 seconds. Next, I tried to use a TOP 100 Percent. Again, only 2,000 rows were return after 30 minutes. TempDB is on a separate SAN Raid group with 200 gig free, Databases on a separate drive with 200 gig free. Server has 13 gig of memory and no other processes were executing.
The only way I could populate the table was by using an Execute SQL Task and hard code an Insert into table selecting data from the view (35 seconds) from SSIS.
Have anyone else experience this or a similar issue? Anyone have a solutionexplanation?
I am using 2 global variable for passing values to c4 and c5 columns in oracle table. The variable names are g_year and g_district. i am using a dataflow task to move data from sql server 2005 to oracle 9i database I am able to load the data from sql server to oracle. Till here it is fine. But the requirement is if i get same data i.e same dist and same year then we need to delete the data in oracle table as "delete from app_t1 where year = ? and district = ?"
Immediately i need to issue a commit statement.
and thereafter i need to load data for that particular district and year.
To accomplish this requirement i am using ,
An Execute SQL Task to Delete the data from ORacle An Execute SQL Task to COMMIT the transaction Finally i am loading data from sqlserver to oracle using a dataflow task.
But i am getting an error as "Value violated the integrity constraints for a column or table.".
I think the deletion operation is not getting committed.
So what i did was i connected to oracle and deleted the data using above DELETE statement and again come back to SSIS package and ran the package once again, this time it is successfull.
I created a data flow with complaicated SQL. There is "type" field in the output column.
I would like to created excel files for each "type" value
E.g. If there is 3 "type" values (A, B, C), I would like to create 3 excel files to store type A, type B, and type C data respectively.
Since the number of possibe value of "type" field is various, how can I create the xls destination dynamic and move the correct type to the corresponding excel file?
The conditional split has fixed conditions, it is not suitable for by dynamic number of value
For Loop condition is not a good choice because I need to run the complicated SQL for many time.
Hi, I m totally new in SSIS Programming. I want to transfer ABC.mdb table to my oit_imp_temp table. Can you send me refrence with (above requiments) code that wroks for u ! thanks a lot !
This seems a bug to me. Or does anyone has a logical explanation that escapes me?
When in SSIS Designer Version 9.00.1399.00 I add output columns (numeric 4,0 ) to a scriptcomponent and fill them with valid numeric data in thescript I get a database error 'invalid number' when I use these columns in an OLE db Command-transformation . This errormessage disappears when I replaces those columns by a dataconversion to the datatype they originally have.
I've a dataflow task on For Each Loop container at control flow of SSIS package. This For Each Loop container reads the CSV files from the specified location one by one, and populates a variable with current file name. Note, the tables where I would like to push the data from each CSV file are also having the same names as CSV file names.On the dataflow task, I've Flat File component as a source, this component uses the above variable to read the data of a particular file.
Now, here my question comes, how can I move the data to destination, SQL table, using the same variable name?I've tried to setup the OLE DB destination component dynamically but it executes well only for first time. It does not change the mappings as per the columns of the second CSV file. There're around 50 CSV files, each has different set off columns in it. These files needs to be migrated to SQL tables using the optimum way.
Which is the best way to setup the Dataflow task for this requirement?Also, I cannot use Bulk insert task here as we would like to keep a log of corrupted rows.