Hi
I am using SQL Server 2008 SSRS Feb CTP
I am using a standard graph report where i want to hide some of the series fields.
This is not working at all.
I hid all the series fields but all were still showing.
Is this a bug in SQL 2008 or am i missing something.
All i did was right click on the series -> Series Properties -> Visibility -> Select Hide
Thanks in Advance
I'm making some reports that are made for getting printed. I currently have three groups of reports, each group having four charts (four A4 papers/group). To cut down on the sheer number of papers on the boards I've been asked to merge these charts so that we'll have all three groups in one chart. This works fine for three of the charts (two line charts and one column chart), where the results gets neatly organized in group order. Where I ran into problems was the last chart..
The last chart is a stacked column chart. With one group, it works quite well; the x-axis is by year/week, and for each week there's a bar where the lower part is "done" and the upper part is "failed".
Now when doing this graph with multiple groups (groups as series), it doesn't put the different groups beside each other as I would've wished, instead it piles them on top of each other as if it was a 100% stacked column.
So the question is; is there some way to make a stacked column graph with multiple series that are one stacked bar per group instead of having all of them stacked on top of each other? Am I just missing some small detail here?
Hi,
I have setup a chart with series on right hand side.
The series is from one of the fields.
How is it possible to remove series and instead place each series name on a graph line?
Or at the very least, how can I place a text on each graph line?
Thanks
Hello
I have a report with pie and bar graphs, I have the paper size 16.54 x 11.69 for landsacpe, there are twelve graphs ,two placed side by side , and in the report manager, the appearence is perfect ,spread over six pages. I have Pagebreakatend True for all the graphs. The problem is with printing, on printing , the are tottaly misaligned,any tips are welcome
Thanks
Inder
Hi,
I have created a multi column report (2 columns), which is working fine. However, I need to have a chart on the same report, but it needs to be the width of the page, and not just the width of one column.
If I could put the chart in the report footer / header that would be perfect, but obviously I can't!
Has anyone else come across this, and any ideas / suggestions you have would be appreciated!
Cheers
Chris
Hi,
I have a need to create a report that has a graph at the top and a table at the bottom. The graph at the top can optionally be made hidden because they cause problems when exported to Excel as images. However, when I set the Hidden property of the graph to true, positions of all items on the report remain absolute. Meaning of course that the table that is located half-way down the page remains half-way down the page and there is a lot of nothing on the first half where the graph used to be.
It would be desirable to have the ability to have the table move up when the graph is not visible, however it obviously doesn't do it automatically and also refuses me the ability to change the position with an expression.
Any advice is appreciated, thank you!
I have a graph in my rdl which retrieves data from database.It works fine in report viewer and also when i export it in PDF and Excel format,but in HTML,it wont show?What could i do about this,i can see in the property that it is looking for the getimage.aspx.I had tried to incorporate the code i have seen from the internet but it seems to me,that the new reporting services now dont have the method renderstream?and what would be my parameters for whatever method that would act as substitute for that missing method..Thanks..
View 3 Replies View RelatedI am facing an issue when report with graph deployed to BI, I can see the misalignment issue in the browser however, when report is run in the Report Builder/SQL Server Data tool or export into PDF then there is no issue.
How to fix the misalignment issue of the graph in the browser. See the both graph below -
Graph Misalignment Issues Screengrab in Browser
Graph without misalignment issue in PDF or Report development tool
I am using the Internet Explorer browser.
I developed a rdlc report. I have a graph chart. Sometimes the value of a label can =0. If the value =0 I want to hide the labelname. However, I also have dummy values =0. This is so that I can have spaces between the bars. The dummy values labels isn't shown in the graph. This works great. I need to add to the expression that if the name of the label isn't dummy but the value =0 to hide the labelname.
The data from sql:
Expression in graph under chart data->category groups->category group properties->label:
=Microsoft.VisualBasic.Interaction.SWITCH(Fields!LabelName.Value = "aTotalForRetire", "Retirement", Fields!LabelName.Value = "cTotalForRelatives", "Relatives", Fields!LabelName.Value = "eTotalForDisability",
"Disability")
The result is below. I want to hide the label relatives as in this example the value=0. It will not always be the case. How can I do that?
Hi
I am very new to analysis services and using MDX.
I want to select data from a cube using an MDX statement and show the data on a graph report.
I want to select the daily, weekly, monthly and quarterly descriptions all in one column to make it easy to represent it on the report.
Then set the 'Date' Column to the x-axis and the Value column to the y-axis.
The user also must have the option to not show certain periods (Switch of daily and weekly)
My MDX works when I select from the SQL Management Studio but as soon as I copy the MDX over to the SSRS Report Designer is splits the daily, weekly, monthly, quarterly and yearly values into seperate columns which makes it very difficult to report on.
----
Code
SELECT NON EMPTY { ([Measures].[ValueAfterLogic])} ON COLUMNS,
NON EMPTY { [KPI Values].[KPI Name].[KPI Name].ALLMEMBERS * ORDER(
CASE 1 WHEN 1 Then [Time].[Hierarchy].[Day Of Month] ELSE NULL END +
CASE 1 WHEN 1 Then [Time].[Hierarchy].[Week Of Year Name] ELSE NULL END +
CASE 1 WHEN 1 Then [Time].[Hierarchy].[Month] ELSE NULL END +
CASE 1 WHEN 1 Then [Time].[Hierarchy].[Quarter Of Year Name] ELSE NULL END +
CASE 1 WHEN 1 Then [Time].[Hierarchy].[YEAR] ELSE NULL END,
[Measures].[ValueAfterLogic],DESC)
}
DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM
(SELECT ( {[KPI Values].[KPI Id].&[{97754C54-AB43-403D-A2C2-21C04BDE93E3}] } ) ON COLUMNS
FROM [Workplace])
WHERE ( [KPI Values].[KPI Id].&[{97754C54-AB43-403D-A2C2-21C04BDE93E3}])
CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
The case statement will take paramter values when finished
----------------end of code portion
Is this possible or is it suppose to 'split' the columns when moving to SSRS.
Thans in advance
Dev environment - SQL 2008 Feb CTP, VS 2008
if a customer can have up to 10 acounts and each account has a balance,
in customer_account table, the same custID repeats and relates to an
accountID and each account has its own balance.
How to display each customer in ONE row and list his account one next to another ?
for example:
custID, acct#1, acct#1Balance, acct#2, acct#2Balance, acct#3, acct#3Balance
how to do write SQl to achive it ?
This is chanllenging to me...
Your advise is greatly appreciated !
Hi,
I have asked this question on 3 forums now and never get an answer, I don't know what is so hard about this question but I will try it here.
I am using SHA512 in C# to convert a password and its salt to hashed. I need to store the password hash and the salt hash in the database in two fields. I was told to use binary field to store the hash data and that the output of SHA512 would ALWAYS be the same no matter how long the password is.
I modified this hash example to use only SHA512 and to work with byte array instead of plain text.
All I need to know now is what size I need to make my binary field to hold this password that is hashed.
http://www.obviex.com/samples/Code.aspx?Source=HashCS&Title=Hashing%20Data&Lang=C%23
Say I have a password which is 30 characters max, and a salt which is 16 characters max. The password and the hash are stored in seperate fields in the same table. They are both hashed using SHA512 and are both being stored as byte arrays in C#, what size to I need to make the binary data type in order to hold the password, and to hold the salt.
Thanks!
I am doing a shopping basket type demo.I have difficulties going from table with fields like (Name,ProductCode) to table(Name, ProductCode, NumberOfItems). One way could be adding just Name and ProductCode fields and let NumberOfItems come automatically. It could have some common value like 1. How should I do this with VB.
View 1 Replies View RelatedHiim new to ms sql server, having previously used mysql. How do i make a auto number field? What datatype shall i use for it? like autonumber for mysql. Ive tried setting my primary key field to uniqueidentifier data type but then i still need to manually add a guid key in there. i want it so it automatically generates a unique key everytime i add a new row. is this possible?!hope someone can help!thanks
View 2 Replies View RelatedHi there!
I'm using a Switch statement in my SQL as follows:
Code:
SELECT symbol,
Switch(timestamp Is Null,Null,
timestamp <= 005959, 0,
timestamp<=235959,23) AS period
INTO averageprice
FROM stocktrades;
Now here's my problem. The Data Type stored in the 'period' field of this new table I've created, dubbed averageprice, is a Text field and I want it to be a Number field. I've tried my best to figure this out and I'm still looking so any helpful hints or solution would be greatly appreciated. Thanks!!!
Hi,
How to make (int) Identity auto increment field showed like
0001
0002
0003
0004
...
I'm hoping to create a graph with durations as bar graphs and % met as a line graph. Is this possible in BIDS?
View 1 Replies View RelatedHi, all experts here,
Thank you very much for your kind attention.
I encountered a very strange problem again. Why the time series displayed on the chart are so strange? The Key time column I chose for my time series algorithm is cal_month(e.g 199001...), but why the date displayed on the time series chart is like :05/06/2448? (it should be like 199001..?) What is that data? And where exactly did it come from? What is the exact cause of this?
Hope it is clear for your help.
I am really confused on this and thanks a lot for your kind advices and help and I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
is there any way i can make a field in a table accomodate more than 1023 charcters? i used the 'varchar' datatype and used a length of 2500, but still, I can't fill up a field with more than 1023 characters. Is there any way to change it?
Also, is there any way to used a symbol or special character in a field? Can SQL server identify such a character? like the alpha or beta symbol...
Thank you...
Hallo !I have a Table with a column "ordernumber"ordernumberA12A45A77A88Is it possible to create a stored procedure which makes a string of these column ?Result: string = ('A12','A45','A77','A88')Thanks !aaapaul
View 3 Replies View RelatedHi,
SELECT UserID, UserName, Password, PublisherID, CurrencyFROM [User]WHERE (Password = 'Anitha') I am using the above mentioned it is working but int the password field i had given it as anitha. Now the querry is retriving the record for anitha, it shouldnot happen. The querry should retrive the record of anitha only for where condition anitha and not for Anitha or ANITHA etc..
Thanks
Vishwanath
I have a table where i have to make a check constraint that states the first 3 characters of the customerid field must be the first 3 characters of the company name I am so lost I looked everywhere.
View 2 Replies View RelatedHi,
I made a sql report and deployed it on my system.Its working fine.
Now i need to install the same report on my client system.The client wants an installable package kind of thing which when runs installs all the report on that system.
How do i acheive this???
please help
Hi, I have 3 report parameters.
If a user selects 'value1' from the first parameter list then parameter list 2 & 3 should be open for the user to make their selection. BUT if the user selects 'value2' from parameter 1 then only parameter list 2 should be open and parameter list 3 invisible. Is this possible??
I am new to the database world and I am trying to understand how all this works. I understand Access and SQL for the most part. My idea that I want to implement is that I want to be able to implement a maintenance log that records motor running life, and piston cycles in the plant. I have a PLC communicating to a server to an InSQL database. Where do i start if i want to make a report that basically counts the total hours that a motor is running, or how many times a piston goes in and out?
any help would be appreciated.
I Need to make RDL report dynamically.Is there any library or dll that i can use?
I am Using vb.net
Given a table that has three columns that together create a key and two columns that together define NameValue pairs, how can the difference between instances of values be calculated and displayed?One table is used to contain periodic dumps of data from various sources. Because this is an early stage of development for the software project instead of having explicit columns that contain specific data the table contains name/value pairs. This allows the software to export anything to the database table. When this data is imported, earch row shares the same key (three columns containing a machine type, serial number and a timestamp), a name that identifies the data and a string that contains the actual data. While this arrangement makes it trivial to support the addition of any data that the software developers want to export, it makes it less obvious as to how to generate reports.Let's make an example. Lets assume that there are two vending machines, each of which has just 3 snacks and each of which generates two separate reports.
Type Sn Timestamp Name Value
A 1 2015-08-15 12:34 Snick 5
A 1 2015-08-15 12:34 Mars 10
A 1 2015-08-15 12:34 MandM 0B 2 2015-08-15 15:31 Snick 1
B 2 2015-08-15 15:31 Mars 9
B 2 2015-08-15 15:31 MandM 0A 1 2015-08-21 09:12 Snick 11
A 1 2015-08-21 09:12 Mars 18
[code]...
So, the names of the values become the report's columns. The reports are sorted by timestamp, then by type, then by serial number.The value associated with the previous row that shares the same name is subtracted from the value of the next row in which the same name occurs and that becomes the displayed value in the report.
IS there a way to do this?
I want everything on one page, no matter how long it is.
I have the footer with the following in it,
**********************************
= " Page " & Globals!PageNumber & " of " & Globals!TotalPages & " " & String.Format(Globals!ExecutionTime, "dd-MM-yyy uu:mm")
********************************
When i view the report it shows the page number and time, but when i print it does'nt appear at all on the print paper( page number and time)
is there a trick to make it appear on the print.
Thank you very much.
I am writing a report in SQL server 2005 Reporting service. The report has two parts: first part shows basic information about the client; the second part lists all the softwares the client has. My question is how to make the softwares listed in two columns as shown below?
John Smith
Title: MSTP Location: Main Campus IP:127.0.0.1
Softwares:
Adobe Standard 7.0 Access 5.0
Internet Explore 6.0 Office XP
Any suggestion is appreciated.
My report works with XMLDP data provider and obtains source data as a
result of a web method call. This memthod returns all data necessary
for the report. Thus, all of about 20 report datasets query the same
web method with the same parameters and then select appropriate data
with different ElementPath expressions. It's so inefficient and
time-consuming! I cant have respective web method for every dataset.
How can I configure SSRS to call web method only once while the report
is executing? Or how can I leverage the performance at all?
How do I get data on my linked report based on my grouped subtotal and grand total from the main report. The subtotal and grand total are calculated columns.
I have a 3 columns in my matrix in the SSRS summary report. Actn_COAST, ActnCITY and NumbOfAccts.
The following is code for my summary report. The results are shown below.
SELECT Distinct ActnCITY, Count(ACCT) as NumbOfAccts,
CASE WHEN ActnCITY in ('NY', 'OH', IN, 'NJ', 'SC', 'NC') THEN 'EAST COAST'
WHEN ActnCITY IN ('CA'. 'NV', 'UT', 'WA', 'OR') THEN 'WEST COAST'
ELSE 'OTHER'
END AS Actn_COAST
FROM tbl1
where ACTNDATE between @STARTDT and @EndDT
Code for my detail report contains the following SQL
SELECT * FROM tbl1 where ACTNDATE between @STARTDT and @EndDT AND @ActnCITY = ActnCITY
I have linked my report based on the NumbOfAccts column. I am able to get data if I click any of the NumbOfAccts values related to the state I want. However when I am not sure how to make the subtotal and grand total work. I want when I click on the subtotal of either coast, I should be able to see records of that coast e.g., if I select 37 I should be able to see all the records in East Coast. If I click on the Grand Total, I only want data related to those 2 coasts.
Hi,
I've created dsv that contain all fields from table database. in the smdl I've remove some fileds due to security. All fields in the smdl do not contain drill.
Issue: When I created calculated field in the report builder the field has a link. When I clicked the drill I saw all the record data including field that not in the smdl.
Questions:
1) Can I remove the link from the calculated fields?
2) Can I prevent from users drill to fields that not in the smdl?
Thanks,
Assaf