Hi,
I have a requirement to update a table in SQL Server through a stored
procedure,
the stored procedure should run periodically, say once in a month, and
update the table.I should not use any external programs to call the
stored procedure, is there any other way to do it without using an
external programs.
Thanks in advance,
Rajan
Hi. I have a stored procedure that I'm interacting with through vb.net... the stored procedure logic, by itself, runs in query analyzer, but when I run it from the code side using the stored procedure, it dies. Now, that said, I'm not a pro at writing a stored procedure, so you might look at this and gasp in horror.
I'm executing a three-staged query, all of which are using temp tables, the final of which is what I'm using for my datagrid import. The temp table name I'm using doesn't work... it's not accepted in the SP and stops the execution of the query stating "invalid table name."
Not being a guru at this, I dont know why it runs in Query Analyzer but not w/i the SP. Can someone look at this and help?
(If its grossly written and there's a better way, I wouldn't be offended to be told that either. I"m looking for ways to write cleaner, faster code)
Here is the SP, any suggestions are very very appreciated.
Thanks so much!
CREATE PROCEDURE sp_PCPPanel_Summary
(@strWHEREMale as varchar(500), @strWHEREFemale as varchar(500))
AS
EXEC('
SELECT
Gender, RealAge, WeightedAge, FWeight, Mweight, AccountNum, PatLastName, PatFirstName, PatAddress, Patcity, PatState , PatZip, Tertiary, PatientStatusKey, InsClass, InsClassDesc, PCPDr, PCPClass, InsurancePlan, CarrierKey, CarrierName, PlanName, Age
INTO #tblTempPCP
FROM(
SELECT tblPCP.AccountNum, tblPCP.PatLastName, tblPCP.PatFirstName, tblPCP.PatAddress, tblPCP.PatCity, tblPCP.PatState, tblPCP.PatZip, tblPCP.PatPhone, tblPCP.DOB, tblPCP.Age, tblPCP.Gender, tblPCP.InsurancePlan, tblPCP.PCPClass, tblPCP.CarrierName, tblPCP.CarrierKey, tblPCP.PCPDr, tblPCP.PlanName, tblPCP.InsAddress, tblPCP.InsCity, tblPCP.InsState, tblPCP.InsZip, tblPCP.Tertiary, tblPCP.PatientStatusKey, dbo.tblPanelWeights.WeightedAge, dbo.tblPanelWeights.Category, 0 as MWeight, dbo.tblPanelWeights.Female as FWeight, dbo.tblPanelWeights.RealAge, tblPCP.InsClass, tblPCP.InsClassDesc, tblPCP.ApptDate FROM dbo.tblPanelWeights RIGHT OUTER JOIN dbo.[vwPCP+Continuity] tblPCP ON dbo.tblPanelWeights.RealAge = tblPCP.Age ' + @strWHEREFEMALE + '
UNION SELECT tblPCP.AccountNum, tblPCP.PatLastName, tblPCP.PatFirstName, tblPCP.PatAddress, tblPCP.PatCity, tblPCP.PatState, tblPCP.PatZip, tblPCP.PatPhone, tblPCP.DOB, tblPCP.Age, tblPCP.Gender, tblPCP.InsurancePlan, tblPCP.PCPClass, tblPCP.CarrierName, tblPCP.CarrierKey, tblPCP.PCPDr, tblPCP.PlanName, tblPCP.InsAddress, tblPCP.InsCity, tblPCP.InsState, tblPCP.InsZip, tblPCP.Tertiary, tblPCP.PatientStatusKey, dbo.tblPanelWeights.WeightedAge, dbo.tblPanelWeights.Category, dbo.tblPanelWeights.Male as MWeight, 0 as FWeight, dbo.tblPanelWeights.RealAge, tblPCP.InsClass, tblPCP.InsClassDesc, tblPCP.ApptDate FROM dbo.tblPanelWeights RIGHT OUTER JOIN dbo.[vwPCP+Continuity] tblPCP ON dbo.tblPanelWeights.RealAge = tblPCP.Age ' + @strWHEREMALE + '
) unionWEIGHTS
GROUP BY Gender, RealAge, WeightedAge, FWeight, Mweight, AccountNum, PatLastName, PatFirstName, PatAddress, patcity, patState , patZip, Tertiary, PatientStatusKey, InsClass, InsClassDesc, PCPDr, PCPClass, InsurancePlan, CarrierKey, CarrierName, PlanName, Age
ORDER BY realage
')
SELECT isnull(cast(RealAge as varchar), 'Unknown') as AgeRange, RealAge as AgeSort, gender, mweight, fweight, [Male] = sum(case when gender = 'M' then 1 else 0 end), [Female] = sum(case when gender = 'F' then 1 else 0 end), count(*) as Totalinto #tblTempPCP2
FROM #tblTempPCPgroup by realage, gender, mweight, fweight
Select AgeRange, AgeSort, [MALE], [FEMALE], [Male Weighted] = case when gender = 'M' then Sum(MWeight * [MALE]) end, [Female Weighted] = case when gender = 'F' then Sum(FWeight * [FEMALE]) endfrom #tblTempPCP2group by AgeRange, AgeSort, [MALE], [FEMALE], gender, totalorder by AgeSortGO
Hi,Sorry, this is a very easy question. I have to create a storedprocedure in a SQL SERVER Database.I have read lots on MSDN about the syntax of this stored procedure :ie.CREATE PROCEDURE spGetContctDetailsAS-- get everything out of contact tableSELECT * FROM tblContactbut I cannot find anywhere how to actually add this procedure, so thatit is accessable in my VB.NET program.What I am asking is : what screen do I type this into? Is it QueryAnalyzer, if so where?Its got me oh so confused. When I've got time i'll read all about SQLServer, but for this morning I need to know how to simply add thatStored Procedure to my database.Thanks LOADS for any help.
View 1 Replies View RelatedI am not sure if this is a correct place to post this question. i am making a simple pay bill system, require people set a schedule that pays bill, then save it into database, when the time come, it auto transfers the money, i am thinking if i can do this in a store procedure. here is the interface:From Account:To Payee:Amount:ScheduleDate: Save the schedule task View scheduled task
View 5 Replies View RelatedHi sir ,
That is my Stored pro. which search in Sales table .
- I do NOT know which parameters will be sent and which will be null.
- I write sqlString which dynamically changed based on which parameters sent.
Here is my code:
Code Snippet
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
Alter PROCEDURE SearchInSales
@ID bigint,
@AmmountPaid bigint,
@AmmountDelayed bigint,
@Quantity bigint
AS
BEGIN
SET NOCOUNT ON;
Declare @sqlStr nvarchar(200)
set @sqlStr='SELECT * FROM Sales WHERE '
if @ID is not null
set @sqlStr = @sqlStr + 'ID = ' + cast(@ID as nvarchar(50))
else
BEGIN
if @AmmountPaid is not null
set @sqlStr = @sqlStr + 'AmmountPaid = ' + cast(@AmmountPaid as nvarchar(50))
if @AmmountDelayed is not null
BEGIN
if len(@sqlStr)>25 -- check if @sqlStr has any of pre. conditions
set @sqlStr = @sqlStr + ' AND '
set @sqlStr = @sqlStr + 'AmmountDelayed = ' + cast(@AmmountDelayed as nvarchar(50))
END
if @Quantity is not null
BEGIN
if len(@sqlStr)>25 -- check if @sqlStr has any of pre. conditions
set @sqlStr = @sqlStr + ' AND '
set @sqlStr = @sqlStr + 'Quantity = ' + cast(@Quantity as nvarchar(50))
END
END
EXEC(@sqlStr)
END
GO
Is there way better than I did?
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
Hello:
In order to eliminate all users who have been using the SA login, I would like to trap all users periodically who are logged in. We have changed the
sa password but just to monitor the login/userid usage, I have the following question:
1) how can I periodically write out to a log, which users are logged in to a given database at certain times of the day?
2) Which steps would I follow to do so?
Thanks.
David Spaisman
I have a folder on an SFTP server in our internal network which gets flat files periodically (almost every minute) from another server. The file structure is like this:
Flat File Format•Line 1—List of field names comma separated •Line 2—List of field type comma separated •Line 3—Data comma separated •Line 4—Data comma separated and so on...
All the files will be like this without the .csv extention. There are a lot of fields and creating a column for each field manually will be a pain. Heres what I am trying to do:
1. Create a process that runs periodically on the server and imports data from files into the SQL server table.
2. Use the information in line 1 and 2 to create the schema of the table and then ignore those lines in every import (the data should be appended to the existing data).
What are my options?
Thank you all,Bullpit
Hi,
I have my SQL server installed and running on a windows 2003 server. Sometimes, the server stops unexpectedly. I want to know if there is any mechanism to alert as and when the SQL server or SQL server agent goes down.
I guess everything is a windows service. Can we have a mechanism to test this service from a script and send an alert mail when the server goes down? How can this be done from a script?
Thanks in advance
-Sudhakar
Hi everyone, here is my situation and what I am hoping to accomplish.
I want some data from my msSQL to be seen on my website but I do not want a website to access the msSQL database due to performance etc (the database is not intended for website use).
Innitially I was thinking of exporting the data every 24hours to a text file that the website would access, but now I am thinking it would be better to have some data sent to a mySQL database that I have from my webhost.
I am not really sure what the best way to do this is, any help please?
thank a lot
Hi, can I create a background process in SQL Server doing specific jobs periodically? Stored procedure is the only solution?
View 4 Replies View RelatedHi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
[Code] ....
I have a requirement to execute an Oracle procedure from within an SQL Server procedure and vice versa.
How do I do that? Articles, code samples, etc???
I have a job that runs nightly, rebuild index. job runs fine every night but every few weeks it fails.
USE msdb
GO
EXECUTE dbo.IndexOptimize
@Databases = 'USER_DATABASES',
@FragmentationLow = NULL,
@FragmentationMedium = 'INDEX_REORGANIZE,INDEX_REBUILD_ONLINE,INDEX_REBUILD_OFFLINE',
@FragmentationHigh = 'INDEX_REBUILD_ONLINE,INDEX_REBUILD_OFFLINE',
@FragmentationLevel1 = 5,
@FragmentationLevel2 = 30,
@SortInTempdb = 'Y',
@UpdateStatistics = 'ALL',
@OnlyModifiedStatistics = 'Y'
This calls the Sp that does the Reindex. It fails at the update statistics with a very generic message. like " Command: UPDATE STATISTICS [xxxx_DB].[dbo].[xxxx_xxx] [_WA_Sys_00000007_49C3F6B7] [SQ... The step failed."
I suspect it has more error but this is all it is showing me when I right click on the job history. therefore, I updated the job step in the advance tab with log to a txt file. Am I on the right track or there is another way to see error some where else.
I looked at the logs but they didn't show any thing.
I have a table that has a primary key that is auto incremented by 1. This table's data is cleared out periodically and as data gets added the auto id primary key continues to increase in numeric value. Once the data is cleared from the table the auto id names could be used again(the eventId is not stored) Currently the eventID is at 26,581,399. I know the maximum int value is 2,147,483,647.
How should I handle this? or rebuild the table every time the data is cleared(problematically)?
for some filegroups, we are turning readwrite back on periodically to trickle some data into an archive. This lasts a few seconds and then we turn readonly back on. What is the impact of doing this while a query is running on the archive?
View 1 Replies View RelatedWe have a vendor who has an SSIS package that executes a DTS package. We've asked that they migrate the DTS code completely to SSIS, but that is something that will not be done in the near future. The package is scheduled to run every 5 minutes through a SQL Server scheduled job. 95% of the time the package executes without an error, but occassionally the following error is reported.
Date 10/2/2007 7:35:00 AM
Log Job History (Pyxis - Data Load)
Step ID 1
Server DEVSQL1V5
Job Name Pyxis - Data Load
Step Name Run SSIS Package
Duration 00:00:03
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: Domain_NameSQLService. The return value was unknown. The process exit code was -1073741819. The step failed.
When I look at the DTS and SSIS package logs no errors are reported and each log indicates the package completed successfully.
Any ideas what this exit code is indicating or how to further troubleshoot the problem?
Thanks, Dave
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
View 9 Replies View RelatedI have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
We are running a SQL Server 2008R2 64-bit database system on a Windows 2012 R2 64-bit Standard system. I have noticed in recent weeks that our differential backups periodically are taking longer than expected to complete. The usual amount of time is about one hour, but on several occasions, it has taken upwards to five hours. The nights when the job takes longer to complete are on Friday.
I did some checking online, and one possible reason for this issue is my scheduling the reindexing of the database on the morning of the Differential backup. For example, this past Friday the reindexing occurred at 1:00 AM with the Differential running at 10:00 PM that night.The article that I read suggested the reindexing, which takes several minutes, if that, to complete, should be scheduled to run just before the Full backup job.
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Thanks in advance
Has anyone encountered cases in which a proc executed by DTS has the following behavior:
1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio
2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+)
The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query)
The Update ad-hoc query will finish in 2 minutes
Hi all,
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
Please advise..
Thank You
I have a stored procedure 'ChangeUser' in which there is a call to another stored procedure 'LogChange'. The transaction is started in 'ChangeUser'. and the last statement in the transaction is 'EXEC LogChange @p1, @p2'. My questions is if it would be correct to check in 'LogChange' the following about this transaction: 'IF @@trancount >0 BEGIN Rollback tran' END Else BEGIN Commit END.
Any help on this would be appreciated.
Hi,I am getting error when I try to call a stored procedure from another. I would appreciate if someone could give some example.My first Stored Procedure has the following input output parameters:ALTER PROCEDURE dbo.FixedCharges @InvoiceNo int,@InvoiceDate smalldatetime,@TotalOut decimal(8,2) outputAS .... I have tried using the following statement to call it from another stored procedure within the same SQLExpress database. It is giving me error near CALL.CALL FixedCharges (@InvoiceNo,@InvoiceDate,@TotalOut )Many thanks in advanceJames
View 16 Replies View RelatedI have a store procedure (e.g. sp_FetchOpenItems) in which I would like to call an existing stored procedure (e.g. sp_FetchAnalysts). The stored proc, sp_FetchAnalysts returns a resultset of all analysts in the system.
I would like to call sp_FetchAnalysts from within sp_FetchOpenItems and insert the resultset from sp_FetchAnalysts into a local temporary table. Is this possible?
Thanks,
Kevin
This is the Stored Procedure below ->
SET QUOTED_IDENTIFIER ON GOSET ANSI_NULLS ON GO
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 5/18/2007 11:28:41 AM ******/if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[BPI_SearchArchivedBatches]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)drop procedure [dbo].[BPI_SearchArchivedBatches]GO
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 4/3/2007 4:50:23 PM ******/
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 4/2/2007 4:52:19 PM ******/
CREATE PROCEDURE BPI_SearchArchivedBatches( @V_BatchStatus Varchar(30)= NULL, @V_BatchType VARCHAR(50) = NULL, @V_BatchID NUMERIC(9) = NULL, @V_UserID CHAR(8) = NULL, @V_FromDateTime DATETIME = '01/01/1900', @V_ToDateTime DATETIME = '01/01/3000', @SSS varchar(500) = null, @i_WildCardFlag INT)
AS
DECLARE @SQLString NVARCHAR(4000)DECLARE @ParmDefinition NVARCHAR (4000)
IF (@i_WildCardFlag=0)BEGIN
SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (Batch.BatchID = @V_BatchID )) AND ((@V_UserID IS NULL) OR (Batch.Created_By = @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 '
if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end
if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end END
ELSEBEGIN SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (isnull (Batch.BatchID, '''') LIKE @SSS )) AND ((@V_UserID IS NULL) OR (isnull (Batch.Created_By , '''') LIKE @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 '
if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end
if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end
END
PRINT @SQLString
SET @ParmDefinition = N' @V_BatchStatus Varchar(30), @V_BatchType VARCHAR(50), @V_BatchID NUMERIC(9), @V_UserID CHAR(8), @V_FromDateTime DATETIME , @V_ToDateTime DATETIME, @SSS varchar(500)'
EXECUTE sp_executesql @SQLString, @ParmDefinition, @V_BatchStatus , @V_BatchType , @V_BatchID, @V_UserID , @V_FromDateTime , @V_ToDateTime , @SSS
GO
SET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GO
The above stored procedure is related to a search screen where in User is able to search from a variety of fields that include userID (corresponding column Batch.Created_By) and batchID (corresponding column Batch.BatchID). The column UserID is a varchar whereas batchID is a numeric.
REQUIREMENT:
The stored procedure should cater to a typical search where any of the fields can be entered. meanwhile it also should be able to do a partial search on BatchID and UserID.
Please help me regarding the same.
Thanks in advance.
Sandeep Kumar
I have a stored procedure that among other things needs to get a total of hours worked. These hours are totaled by another stored procedure already. I would like to call the totaling stored procedure once for each user which required a loop sort of thing
for each user name in a temporary table (already done)
total = result from execute totaling stored procedure
Can you help with this
Thanks
Hi there
i have a stored procedure like this:
CREATE PROCEDURE SP_Main
AS
SET NOCOUNT ON
BEGIN TRANSACTION
exec SP_Sub_One output
exec SP_Sub_Two output
IF @@ERROR = 0
BEGIN
-- Success. Commit the transaction.
Commit Tran
END
ELSE
Rollback Tran
return
GO
now the problem is, when i execute the stored procedure's inside the main stored procedure, and these sub sp's has an error on it, the main stored procedure doesnt rollback the transation.
now i can put the "begin transation" in the two sub stored procedure's. The problem is
what if the first "SP_Sub_One" executed successfully, and there was error in "SP_Sub_Two"
now the "SP_Sub_One" has been executed and i cant rollback it... the error occured in the
"SP_Sub_Two" stored procedure ... so it wont run ... so there will be error in the data
how can i make a mian "BEGIN TRANSACTION" , that even it include the execution of stored procedure in it.
Thanks in advance
Mahmoud Manasrah
Hello people,
When I am trying to call a function I made from a stored procedure of my creation as well I am getting:
Running [dbo].[DeleteSetByTime].
Cannot find either column "dbo" or the user-defined function or aggregate "dbo.TTLValue", or the name is ambiguous.
No rows affected.
(0 row(s) returned)
@RETURN_VALUE =
Finished running [dbo].[DeleteSetByTime].
This is my function:
ALTER FUNCTION dbo.TTLValue
(
)
RETURNS TABLE
AS
RETURN SELECT Settings.TTL FROM Settings WHERE Enabled='true'
This is my stored procedure:
ALTER PROCEDURE dbo.DeleteSetByTime
AS
BEGIN
SET NOCOUNT ON
DECLARE @TTL int
SET @TTL = dbo.TTLValue()
DELETE FROM SetValues WHERE CreatedTime > dateadd(minute, @TTL, CreatedTime)
END
CreatedTime is a datetime column and TTL is an integer column.
I tried calling it by dbo.TTLValue(), dbo.MyDatabase.TTLValue(), [dbo].[MyDatabase].[TTLValue]() and TTLValue(). The last returned an error when saving it "'TTLValue' is not a recognized built-in function name". Can anybody tell me how to call this function from my stored procedure? Also, if anybody knows of a good book or site with tutorials on how to become a pro in T-SQL I will appreciate it.
Your help is much appreciated.
Hello,
I am hoping there is a solution within SQL that work for this instead of making round trips from the front end. I have a stored procedure that is called from the front-end(USP_DistinctBalancePoolByCompanyCurrency) that accepts two parameters and returns one column of data possibly several rows. I have a second stored procedure(USP_BalanceDateByAccountPool) that accepts the previous stored procedures return values. What I would like to do is call the first stored procedure from the front end and return the results from the second stored procedure. Since it's likely I will have more than row of data, can I loop the second passing each value returned from the first?
The Stored Procs are:
CREATE PROCEDURE USP_DistinctBalancePoolByCompanyCurrency
@CID int,
@CY char(3)
AS
SELECT Distinct S.BalancePoolName
FROM SiteRef S
INNER JOIN Account A ON A.PoolId=S.ID
Inner JOIN AccountBalance AB ON A.Id = AB.AccountId
Inner JOIN AccountPool AP On AP.Id=A.PoolId
Where A.CompanyId=@CID And AB.Currency=@CY
CREATE PROCEDURE USP_BalanceDateByAccountPool
@PoolName varchar(50)
AS
Declare @DT datetime
Select @DT=
(Select MAX(AccountBalance.DateX) From Company Company
INNER JOIN Account Account ON Company.Id = Account.CompanyId
INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID
Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId
WHERE SiteRef.BalancePoolName = @PoolName)
SELECT SiteRef.BalancePoolName, AccountBalance.DateX, AccountBalance.Balance
FROM Company Company
INNER JOIN Account Account ON Company.Id = Account.CompanyId
INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID
Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId
WHERE SiteRef.BalancePoolName = @PoolName And AccountBalance.DateX = @DT
Order By AccountBalance.DateX DESC
Any assistance would be greatly appreciated.
Thank you,
Dave