Making Incremental Updates To A Data Warerhouse

May 12, 2006

We have a legacy database whose data needs to be included in our yet-to-be-built sql 2005 data warehouse. Some of the tables don€™t have any natural candidates for a primary key. (Of course, we also need to add other data to the mix.)

Suppose we load the empty warehouse initially. In following loads we don€™t want to include those records that haven€™t changed from the first load (€śduplicates€?) but we also don€™t want to delete the contents of the entire warehouse because of the load time. Any ideas/best practices how to handle €śincremental updates€? to a warehouse would be appreciated.

TIA,

Bill

View 7 Replies


ADVERTISEMENT

Firing A Trigger When A User Updates Data But Not When A Stored Procedure Updates Data

Dec 19, 2007

I have a project that consists of a SQL db with an Access front end as the user interface. Here is the structure of the table on which this question is based:




Code Block

create table #IncomeAndExpenseData (
recordID nvarchar(5)NOT NULL,
itemID int NOT NULL,
itemvalue decimal(18, 2) NULL,
monthitemvalue decimal(18, 2) NULL
)
The itemvalue field is where the user enters his/her numbers via Access. There is an IncomeAndExpenseCodes table as well which holds item information, including the itemID and entry unit of measure. Some itemIDs have an entry unit of measure of $/mo, while others are entered in terms of $/yr, others in %/yr.

For itemvalues of itemIDs with entry units of measure that are not $/mo a stored procedure performs calculations which converts them into numbers that has a unit of measure of $/mo and updates IncomeAndExpenseData putting these numbers in the monthitemvalue field. This stored procedure is written to only calculate values for monthitemvalue fields which are null in order to avoid recalculating every single row in the table.

If the user edits the itemvalue field there is a trigger on IncomeAndExpenseData which sets the monthitemvalue to null so the stored procedure recalculates the monthitemvalue for the changed rows. However, it appears this trigger is also setting monthitemvalue to null after the stored procedure updates the IncomeAndExpenseData table with the recalculated monthitemvalues, thus wiping out the answers.

How do I write a trigger that sets the monthitemvalue to null only when the user edits the itemvalue field, not when the stored procedure puts the recalculated monthitemvalue into the IncomeAndExpenseData table?

View 4 Replies View Related

Tranferring Data From SQL Server In Incremental Way

Jul 30, 2007

Hi All
I have this table which has about 30 thousand records

I want to send all the records everyday at night to the other interface(TIBCO) in form of XML.

I can send all the records at once or maybe 10 records at a time

1. If I make one XML with all the records and send it, its risky as XML would be quite big, also it would be time consuming and would generate a big load on the program(.NET program will create XML). Also, any abnormal error would kill the whole process and we would have to start again

2. Processing 10 or 20 records at a time and then sending the XML(with these 10 or 20 records) and doing this till all the records are sent. If there is any error in between in the program(.NET), the program can start from that step again. Now the problem is how I can keep track of the record number already sent to the other interface
Can someone help?
Thanks

View 4 Replies View Related

SQL Server 2008 :: Incremental Load Only Required Data?

Apr 30, 2015

I have a table in Server A and it has 5 columns. One is Address & ID, CreateDatetime,..

I need to transfer data from this table from Server A to server B for a report pupose. The Address column in this table has some places two address in the table. I am giving ex below

Address
Houston, Dallas
Redmond
Sacramento
New Jersey, New York

I want to avoid the rows where address are two Houston, Dallas & New Jersey, NewYork to the destination table in server B and need to do incremental loads.

how to proceed with this?

The version we are using is Sql Server standard edition 2008r2

View 2 Replies View Related

Integration Services :: Incremental Loading Data In SSIS

Aug 30, 2015

I am looking to load data incrementally from staging to spectrum database.

Master = Staging table
Detail = Spectrum table
On below logic

.If record from Detail (Spectrum table) is null
then do insert the record into Spectrum table
set status_flag to 'A' for active
else do update the record (replace all old values with new values)
set status_flag to 'A' for active
end-if

· If record from Master (Staging table) is null
then do soft delete
set status_flag to 'D' for delete
end-if

View 2 Replies View Related

SQL Security :: Making Data Change In Read Only Database Without Letting Other Users Update Data

Aug 6, 2015

I want to make data changes in read_only database , that's why i must set database read_write. While database is at read_write mode, i want to be sure that no one makes change in database.

For this aim, i write the code below, but i suspect that after setting the database read_write, till the setting database
single_user ,is it possible get DML script from another user. Is the code below enough for this operation. Or is there another way?

Reminding: Read_only database can not be set single_user mode. That's why, first you must set database read_write.

The code;

use master
alter database xxx set read_write
with rollback immediate
alter database xxx set single_user
with rollback immediate

use xxx
update  tablexxx set columnxxx=yyy
use master
alter database xxx set read_only
with rollback immediate
alter database xxx set multi_user
with rollback immediate

View 5 Replies View Related

Data Access :: Selecting Data Without Making Any Lock

Oct 26, 2015

I have a scenarios where if I execute select * from tbl it should display the all the records without waiting to release any lock.  For example suppose I have one table called tbl and one session is updating one records and not committed yet and in other session if i execute select * from table I can see all the records, for that records it can show me older version. but my select statement should not wait to commit another session and also it should not show the modified data.

View 4 Replies View Related

Making A Chart Run With Multiple Data Sets.

Jul 26, 2007

Hello and thanks in advance.

I was wondering if anyone has ever written a chart with multiple datasets.

I need to be able to show sales dollars inflow by order date on one line and on the other needs to be sales dollars delivered by delivery date. So the all sections Values, Category groups, and Series Groups in the chart will be from 2 different datasets.

I have tried but it will not allow aggreates in the series groups.

Any Ideas would be greatly appreciated.

Thanks, Leo

View 1 Replies View Related

Making The Value Of One Coloumn The Same For A Large Set Of Data In A Table?

Nov 19, 2007

Hello, Im a very new to SQL server etc, so please bear with me.

I am currently trying to find a quick way of making a large number of database entries within a particular table all have the same value in one particular column.

I have created a query in MS SQL Server Management Studio, which outputs all the entries in a particular table that I want to change. Currently they all have different values in a certain column in this table, and I want them all to have the same value in that column.

How do I do this within Server Management Studio?

Thank you.

View 3 Replies View Related

Data Replication - Pushing Data Updates

Oct 26, 2007

Guys,

I have 14 databases, the last database - 14th one will have lookup tables only. The other 13 databases will have these lookup tables and data tables. At the end of each day I will make updates for lookup tables on 14th database, I want to be able to push the updates to any or some of the 13 databases. Look up tables will have only upto 100 rows, so I am not concerned about the bandwidth. What is the best way to accomplish this.

Any suggestions and inputs would help

Thanks

View 1 Replies View Related

Making A Form That Inputs Data In To My Database And Getting This Error...

Jan 5, 2008

Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately. Compiler Error Message: BC30456: 'InserParameters' is not a member of 'System.Web.UI.WebControls.SqlDataSource'.Source Error:





Line 15: registrationDataSource.InsertCommand = "INSERT TO Reputation (firstname, lastname)VALUES(@First Name, @Last Name)"
Line 16:
Line 17: registrationDataSource.InserParameters.Add("firstname", firstname.txt)
Line 18: registrationDataSource.InserParameters.Add("lastname", lastname.txt)
Line 19: Source File: C:UsersQaiphyx
eputationDefault.aspx.vb    Line: 17
Show Detailed Compiler Output:

View 1 Replies View Related

Making Changes To A Table With Lots Of Data. Timeout Error?!

Oct 11, 2006

Hello,

I have a table that is fairly large, and I need to make a change to one of the columns in the table. Namely I need to change the datatype and rename that column. When I try to save the updated table, I keep getting a timeout error that says.

'eligibility (dbo)' table
- Unable to create index 'PK_eligibility'.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.

Any ideas on how to make the table change more efficient or change the timeout period. I need to keep the existing data in the table. I am using sql server managment studio(2005) connected to a sql server 2000 database.

Thanks!

View 7 Replies View Related

Troubleshooting Data Updates

Mar 7, 2006

I don't know if the title for the subject is appropriate here, anywayhere goes:This process was set up by someone and I have inherited it. I have asql2000 database that has about 13 tables that get populated with datafrom 3 different databases. I have identified where each of this datacomes from, and the stored procedures that do the updates, inserts, anddeletes, and the jobs that run these stored procedure to do theupdates, except for one table. The updates for all the other tablesare done through scheduled jobs. For the one table I know where thedata comes from and the stored procedure that needs to run to do theupdate on the table, however I have not been able to identify theprocess that runs the stored procedure.I am hoping that someone can give me a clue as to how to find out wherea stored procedure is being used - or any other hint as to how I couldgo about finding out how this table gets updated.ThanksKR

View 2 Replies View Related

Integration Services :: Load Incremental Data Into Fact Table When Source Table Not Have Timestamp And Unique Key

Sep 24, 2015

I have a transaction table having about 40 crore rows in source. It don't have timestamp and unique key columns. It have only Bill_month and Bill_Year columns. Actually for loading this table into staging I have added a new datetime column by adding default bill_date as 01. Then

* First we delete last 3 month data from staging tables.
* Get last 3 months data from source table.
* Load that 3 months data from source to staging table. 

We do this because we only get update for last three months data. Now I have to include this transaction table as Fact table in DW. What will be the best practice for loading the fact table by picking data form staging table. Also we have to look up with dimensions for Foreign Keys. 

* Should I implement the same method of deleting last 3 months records and loading them again. 

View 3 Replies View Related

Editing Underlying Boolean Data Without Making Cells Editable

Oct 5, 2007

I'm having a real hard time coming up with a solution to this problem.  I created a custom gridview control from Dino Esposito's "Extending Gridview" article which autogenerates a checkbox column that allows for multiple record selection.  Once a user checks a box, the entire row gets selected.  I added a dropdown list on the top of the page that has only two options, "Yes" or "No".  What I'm trying to do is update a boolean column called "contract" (I'm using the Pubs sample database) for all selected rows (via checkboxes checked) depending on whether the user selects "Yes" or "No" from the drop down menu.  For example,1)  the user selects "No" in the dropdown2) The user checks all rows in the checkbox column for which he wants the  all the values"contract" field set to "No"3) The user then clicks on a button called "Submit" and all selected records get updated to "No" under the "contracts" column.  The idea is to allow the user to change the boolean values from a field for multiple records.  Hence, making individual cells editable is pointless.  Anybody have an idea how to go about this?

View 3 Replies View Related

SQL Server 2012 :: Making Query For Presenting Data In Different Format?

Jun 18, 2015

I have below table:

IF OBJECT_ID('tempdb..#complaints') IS NOt NULL
DROP TABLe #complaints

--===== Create the test table with

create table #cs([Year] float,
[Week] float,
[Month] float,
[C#] float,
[Dept] nvarchar(255)
,[Issue] nvarchar(255), [Type] nvarchar(255), [Dept age] nvarchar(255))

--===== All Inserts into the IDENTITY column

INSERT INTO #cs
([Year], [ Week], [ Month], [C#],[Dept],[Issue], [Type], [Dept age])
SELECT 2015, 14, 4, 188, D1,I1,T1, 5 UNION ALL
SELECT 2015, 14, 4, 452,d1, I1, T2, 5 UNION ALL
SELECT 2015, 14, 4, 63, d1, I1, T1, 6 UNION ALL
SELECT 2015, 14, 4, 9, d1,I2, T1, 7 UNION ALL
SELECT 2014, 14, 4, 187, D1,I1,T1, 5 UNION ALL
SELECT 2014, 14, 4, 451,d1, I1, T2, 5 UNION ALL
SELECT 2014, 14, 4, 62, d1, I1, T1, 6 UNION ALL
SELECT 2014, 14, 4, 10, d1,I2, T1, 7 UNION ALL)

and i want to have a table in below format: (query for it)

Week, Month, C1#,c2# Dept,Issue, Type, Dept age
14, 4 188 187 d1 i1 t1 5
14, 4 452 451 d1 i1 t2 5

I.E. I WANT two columns C1# and C2#, where C1# contains data from 2015 and C2# contains data from previous year (2014). If 2015 data is not present, then C1# will contain data of 2014 and C2# will contain data of 2013.

View 9 Replies View Related

Updates Form Remote Data

Oct 13, 2005

I have been successful with DTS packages and various SQL statements. However, I have a new challenge. I have a table in an SQL Server database. One of the columns is employee number and a column for department number(which is not populated) In a remote AS400 file I have the employees number and department number. I want to create a package to connect to remote table and update SQL Server table with department number where the two tables match on the employee number.

View 3 Replies View Related

Is It Possible To Manage Data Entry And Updates T

Jul 22, 2007

Hi Guys,

I'm using Visual Basic 2005 Express and SQL Server 2005 Express. I have textboxes on a VB form linked to 2 database tables.

I am wondering if it is possible to use just ONE BindingNavigator to manage data entry and updates to THE database tables. I initially thought I could manage the tables but have I encountered some problems:

i)When I entered a new record, and clicked on the SAVE BUTTON the new record the textboxes for the 1st table saves the record to the database, but the textboxes for 2nd table still retained data in them and are not saving theirs to the database.


ii) The same textboxes for the 2nd table are NOT allowing for updates too! Or, could it simply be that it is not possible to use this method for data entry and updates?


Thanks you.

View 1 Replies View Related

Make A Job That Updates Data By Row Amount

Aug 6, 2007

I need to make a job that will update up to 8000 rows with the list description of 'berkhold' to 'berknew' in SQL 2000. This is something that I have to do with several projects manually every day by doing the following 2 steps.

SELECT ListDescription, CRRecordID
FROM dbo_BerkleyGroupInventory
WHERE ListDescription ="BerkHold" AND CRCallDateTime<'1/1/2003' AND CRCallResultCode ='CC'
ORDER BY CRRecordID

I then scroll to the 8000th row and copy the CrrecordID and run the following query

UPDATE dbo.berkleygroupinventory
SET listdescription ='berknew'
WHERE ListDescription ='BerkHold' AND CRRecordID <=5968432 AND CRCallDateTime ='1/1/2003' AND CRCallResultCode='CC'

I'm sure there's an easier way to do this, but I'm very new to SQL and haven't figured it out yet

View 11 Replies View Related

Data Replication And Pushing Updates

Oct 26, 2007

Guys,

I have 14 databases, the last database - 14th one will have lookup tables only. The other 13 databases will have these lookup tables and data tables. At the end of each day I will make updates for lookup tables on 14th database, I want to be able to push the updates to any or some of the 13 databases. Look up tables will have only upto 100 rows, so I am not concerned about the bandwidth. What is the best way to accomplish this.

Any suggestions and inputs would help

Thanks

View 5 Replies View Related

Not Allowing Updates Row With Ntext Data Types

Sep 19, 2000

I am running a Access97 front end with a SQL Server 7 backend. On records with an ntext datatype, you are only allowed to update records if the ntext field is null. The tables are linked from access. You get a "cannot update linked table" and "ODBC error #306." Any suggestions??

View 1 Replies View Related

What Is The Best Way To Manage Bulk Imports And Updates In Data?

Apr 28, 2008

I got anywhere from a couple hundred to a hundred thousand records that need to be updated or inserted into their SQL Server 2005 end destination. What are some of the best ways to accomplish this? Right now we are doing it manually through line by line updates and inserts. Would I use BC or some other bulk import tool?

View 5 Replies View Related

Changing A Field's Value When User Updates Data

Sep 10, 2007

Hello,
I am working on a project that involves one part where a field's value needs to be changed when the user updates the record. Here is the situation in detail:
There is an InputData table where the user enters new records or changes existing records. There is a field called "calculated" in this table which has a default value of 'no'. A stored procedure runs math calculations on all the InputData records where the calculated field = 'no'. At the end of this stored procedure, it sets the calculated field = 'yes'. When new records are added by the user their "calculated" field value is 'no' by default so that the next time the stored procedure is executed, it only runs the math calculations on the new records. The problem is, if a user changes an existing record, the "calculated" field needs to be changed from 'yes' to 'no' so that the stored procedure recalculates the math for the modified record. How do I change the value from 'yes' to 'no' on records that the user modifies?
Thanks.

View 9 Replies View Related

Data Warehousing :: Dimension With Over 330M Records / Need Of Updates

Jun 22, 2015

I have a table that is increasing quite largely each day. By now, I have average 300 million of records over 2.5 years. Before we received our new interface, the data we received was aggregated and thus not that big.The problem is that the table is so huge that I cannot use the Slowly Changing Component. I was thinking about making a temp table where I load the incremental data before I load it into the final data mart table.Based on this temporary table I use a script to compare the temp data with the already existing data in the data mart. However, this requires a compare of each records (300 mil records).

View 3 Replies View Related

Merge Data From Two Tables Into One Table - No Updates/only Insert

Sep 10, 2007


Hi all,,

I posted the questions in sql forum and got good sql statement to work with it.. However, I want to see if there is a way to do it in SSIS..

May be this is really basic questions but I am having hard time to do it in sql server 2005 SSIS..

I have a flat file that I want to merge with table in SQL server 2005.

1> I have successfully created a data flow task to import data from flat file to Table X (new table I created for this package).

Now here is my question.
I have a Table A already in the database with the same column structure as of TableX (Both the tables have 20 columns/same Name/Same design).

I want to merge Table A and Table X and stored the data in TableA. However, I just don't want to merge blindly, I need to insert a new row in Table A only if the same row does not exist in Table A (there is no primary key, i am looking certain fields to see if the rows are same)..

Here is an example:
Table A
--------------
1 test test1 test2 test3 test4 test5
2 test test6 test7 test8 test9 test10

Table X
------------
1 test test1 test2 test99 test4 test5
2 test test98 test97 test 96 test95 test94
--------------------------------------------------------
Now, I want to only insert row 2 of Table X since there is match on 4 of the fields in row1..
The new Table A should look like

NEW Table A'
-----------------

test test1 test2 test3 test4 test5
test test6 test7 test8 test9 test10
test test98 test97 test 96 test95 test94


------------------------------------
I think, I could do this using Execute SQL task and write all the code in sql, but that will be cumbersome and time consuming.. Is there a simpler way to achieve this?

Thanks in advance.

View 6 Replies View Related

Power Pivot :: Meta Data Query Updates

Sep 1, 2015

I have been given a request by a business analyst to update the text 'old' to 'new' within the column names / measure names and associated calculations within a PowerPivot model. There are hundred of columns / measures / calculations, etc. which need to be renamed.

Is there any way of updating these changes to the model other than making these changes manually or is there some way of doing the following type of operation in PowerPivot; -

UPDATE tblColumnNames SET Column_name, etc REPLACE ('old','new', all columns),('old','new', all measures),('old','new', all calculations)
FROM
tblColumnNames

View 2 Replies View Related

Create A Data Flow In SSIS Wich Updates Som Rows.

Aug 14, 2006

Hi,

I have a table customer wich has the columns phone_number(char type) and ok_to_call(bit type). There are already data in the table and the column ok_to_call only contains the value false for every row.

Now i want to update the latter column. I have a text file with a list of phone numbers and i want that all the rows in the Customer table(phone_number column)that matches the number in the text file to update ok_to_call to true.

This is to be done in SSIS(Integration Services). I'm new at this and i've looked around that tool but is a lot of items, packages and stuff so i dont know where to begin.

Would appreciate help on how to solve this issue in SSIS. What controlflow/Data flows to use,wich items and packages to use, how to configure and how to link together?

Regards
/Tomas

View 3 Replies View Related

Question About Automating Data Conversion And Updates To A Table In SQL Database

Feb 16, 2008

Hello,

I will be getting data in either Excel or Access form on a daily basis. I would like to automate the process of converting this (excel or access) data to a table in an existing SQL database. Since this conversion needs to performed on a daily basis, note that I need to update the table that contains data from the day before.

Is it possible to do this and if it is possible, can someone tell me how to do it.

Thanks in advance,

Joe green

View 1 Replies View Related

Does The Configure Data Source Wizard Work For Updates,Inserts, And Deletes ?

Jun 8, 2007

Ok, I think this may have a simple answer. Basically I have no problems in setting up QueryString/Control/etc parameters when I use SELECT in the Configure Data Source Wizard as it prompts me for the necessary parameters. But when I try to use the Configure Data Source Wizard with an UPDATE, INSERT or DELETE it does NOT prompt me for the required parameters.Is this a bug or am I just missing something? Do I have to put them in manually or something?Thanks! 

View 5 Replies View Related

SQL Server 2014 :: Stored Procedure That Inserts And Updates A Table With Excel Data?

May 27, 2014

I need a script that inserts the data of an excel sheet into a table. If something already exists it should leave it, unless it's edited in the excel sheet and so on and so on. This proces has to go through a stored procedure... ...But how?

View 6 Replies View Related

How Can I Do A Multiple Insert Or Multiple Updates Or Inserts And Updates To The Same Table..

Oct 30, 2007

Hi...
 I have data that i am getting through a dbf file. and i am dumping that data to a sql server... and then taking the data from the sql server after scrubing it i put it into the production database.. right my stored procedure handles a single plan only... but now there may be two or more plans together in the same sql server database which i need to scrub and then update that particular plan already exists or inserts if they dont...
 
this is my sproc...
 ALTER PROCEDURE [dbo].[usp_Import_Plan]
@ClientId int,
@UserId int = NULL,
@HistoryId int,
@ShowStatus bit = 0-- Indicates whether status messages should be returned during the import.

AS

SET NOCOUNT ON

DECLARE
@Count int,
@Sproc varchar(50),
@Status varchar(200),
@TotalCount int

SET @Sproc = OBJECT_NAME(@@ProcId)

SET @Status = 'Updating plan information in Plan table.'
UPDATE
Statements..Plan
SET
PlanName = PlanName1,
Description = PlanName2
FROM
Statements..Plan cp
JOIN (
SELECT DISTINCT
PlanId,
PlanName1,
PlanName2
FROM
Census
) c
ON cp.CPlanId = c.PlanId
WHERE
cp.ClientId = @ClientId
AND
(
IsNull(cp.PlanName,'') <> IsNull(c.PlanName1,'')
OR
IsNull(cp.Description,'') <> IsNull(c.PlanName2,'')
)

SET @Count = @@ROWCOUNT
IF @Count > 0
BEGIN
SET @Status = 'Updated ' + Cast(@Count AS varchar(10)) + ' record(s) in ClientPlan.'
END
ELSE
BEGIN
SET @Status = 'No records were updated in Plan.'
END

SET @Status = 'Adding plan information to Plan table.'
INSERT INTO Statements..Plan (
ClientId,
ClientPlanId,
UserId,
PlanName,
Description
)
SELECT DISTINCT
@ClientId,
CPlanId,
@UserId,
PlanName1,
PlanName2
FROM
Census
WHERE
PlanId NOT IN (
SELECT DISTINCT
CPlanId
FROM
Statements..Plan
WHERE
ClientId = @ClientId
AND
ClientPlanId IS NOT NULL
)

SET @Count = @@ROWCOUNT
IF @Count > 0
BEGIN
SET @Status = 'Added ' + Cast(@Count AS varchar(10)) + ' record(s) to Plan.'
END
ELSE
BEGIN
SET @Status = 'No information was added Plan.'
END

SET NOCOUNT OFF
 
So how do i do multiple inserts and updates using this stored procedure...
 
Regards
Karen

View 5 Replies View Related

Incremental Count

Nov 12, 2003

Hi guys,

I am trying to get a result like below without using the cursor.

col1 col2 col3 col4

1111 date uniquenumber 6
1111 date uniquenumber 5
1111 date uniquenumber 4
1111 date uniquenumber 3
1111 date uniquenumber 2
1111 date uniquenumber 1
2222 date uniquenumber 4
2222 date uniquenumber 3
2222 date uniquenumber 2
2222 date uniquenumber 1
3333 date uniquenumber 2
3333 date uniquenumber 1

the column that say unique number is unique and is not duplicated and date column might have duplicates


Please advise whether it is possible to write a query without cursor.



Thanks,
Anu

View 5 Replies View Related

A Incremental Column?

Apr 16, 2005

Hi!

I have a request of having a select statement displaying a list of values in descending order and another column that tells what record it is.

something like this:

id | value | no
4 345 1
7 234 2
2 143 3
9 32 4
3 4 5

...

is this possible?

can it be something like this:

select id, value, increment(1,1) as no from tblTable
order by value desc

thanks.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved