Manual Back Of Database Error
Nov 27, 2006
Hi
I am attempting to take a manual backup of an SQL 2005 database, via
Right Click on MyDatabase --Tasks --Backup
[Specify the filename path and type of backup]
However, when I try to specify the filename or, in fact, do anything, I
receive the following error
Property BackupDirectory is not available for Settings
'Microsoft.SqlServer.Management.Smo.Settings'. This property may not
exist for this object, or may not be retrievable due to insufficient
access rights. (Microsoft.SqlServer.Smo)
The user I'm logged into the database with, however, has full rights
within SQL.
Does anyone have any ideas?
Thanks!
View 1 Replies
ADVERTISEMENT
Jun 22, 2015
I have SQL Server 2008 R2 database mirroring setup with witness. Below database connection string is used by the application
jdbc:sqlserver://<Server_A>MSSQLSERVER;databaseName=<Mirrored_DB>;port=1433;failoverPartner=<Server_B>MSSQLSERVER
During some maintenance activity at the OS side , I tried to manually failover database from Server_A to Server_B. It took long time for failover to Server_B. While failing over the Mirrored_DB database goes in In Recovery status and application is not able to connect to database. I waited for long time more than 40 mins for database to come online on Server_B but it did not work.So I have recovered database on Server_B using RESTORE DATABASE Mirrored_DB WITH RECOVERY.
After database was recovered on Server_B application was not able to connect to database with error as "The database <Mirrored_DB> on server Server_BMSSQLSERVER is not configured for database mirroring".
My Question is
Why manual failover did not get back database on secondary server upwhy the original connection string below is not able to connect to the database while database is online on Server_B but without mirroring
jdbc:sqlserver://<Server_A>MSSQLSERVER;databaseName=<Mirrored_DB>;port=1433;failoverPartner=<Server_B>MSSQLSERVER
View 3 Replies
View Related
May 14, 2015
New to Database Mirroring and I have a question about the Principal database server. I have a Database Mirroring setup configured for High-safety with automatic fail over mode using a witness.
When a fail over occurs because of a lost of communication between the principal and mirror, the mirror server takes on the roll of Principal. When communication is returned to the Principal server, at some point does the database that was the previous Principal database automatically go back to being the Principal server?
View 2 Replies
View Related
Apr 27, 2007
Assuming that I have a table [users] in a MSSQL 2005 database. the table has two columns. [userId] and [password].
I have an aspx with C# page with two textboxes and a button.
I want to let the user login or send him an error message if the password or the username does not match from the table in database.
I always made this possible through the template database from administrating the website. but never tried to do it as simple as that. I'm lost here!
How can I do it?
View 3 Replies
View Related
Jul 23, 2005
I've got a java application that connects to a sql server 2000database.The application must access with total permissions to database but Idon't want that anybody can insert or delete data with the corporativeadministrator of sql server 2000.How can I lock the corporative administrator in order to not permitmanual manipulation but my application can work properly?Thanks!
View 1 Replies
View Related
Apr 29, 2008
Hi guys
when we do manual Database shrink at normal office hours does it make any issues
or best way to control it
1. Does it lock database and runs the shrink statement.
2. at time of shrink users allowed or not.
3. transactions can be committed.
View 2 Replies
View Related
Mar 28, 2007
What do I have to do to get this to work?
C:>aspnet_regsql.exe -A m -E
Start adding the following features:Membership
...............An error has occurred. Details of the exception:An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under thedefault settings SQL Server does not allow remote connections. (provider: NamedPipes Provider, error: 40 - Could not open a connection to SQL Server)
Unable to connect to SQL Server database.
View 3 Replies
View Related
Sep 12, 2007
I want to manually install the database for the reference implementation (I have SQL 2005 Express when I installed the Factory, but AdventureWorksMobileStaging database is not installed in my sqlExpress, so i try to install manually in that database ) I have noticed a number of scripts under the AdventureWorksToGoDBScripts folder. Is there any specific order of installing those scripts?Any other things that need to be followed for getting the reference database up and running?Thanks in advance
Varisai
View 3 Replies
View Related
Jan 29, 2008
I have a really odd one here. We have a production server which is running SQL 2000 Enterprise Edition SP3. It has a number of databases which are backed up nightly. Last night all of the back-up jobs failed with the following error: -
Msg 913, Sev 16: Could not find database ID ##. Database may not be activated yet or may be in transition. [SQLSTATE 42000]
The databases are in good shape - no issues to report. When I run the Agent Job code within a Query Analyser session it works fine.
When I try and re-start the back-up from the Agent Job it continues to fail with the same error.
Any ideas?
View 2 Replies
View Related
Feb 4, 2008
Hi all
Iam working in Prodcution ENV,Please help how make space
The log file for database 'Home_alone' is full. Back up the transaction log for the database to free up some log space.
View 10 Replies
View Related
Nov 15, 2006
Hello,i am in great trouble. I want to revert back to original state ofdatabase before i performed restore database on my sql server 2KDatabase. Accidently i didn't take backup of my Database and i didrestore, so is there any way to get the original state back of myDatabase?Any suggestion will be highly appriciated.Regards,S. Domadia.
View 2 Replies
View Related
May 11, 2007
Can someone provide a step by step tutorial for this? I'd like to safely update a database that is used for a website without much or any downtime.
View 1 Replies
View Related
Aug 10, 2007
I'm having a problem with a Maintenance Plan created for SQL Server 2005 using Microsoft SQL Server Management Studio. See version information at the bottom of this post.
I have a Maintenance Plan using the "Back Up Database Task" that is set to perform a "Full" back up of "All Databases" on the local server. However, it appears that the list of "All databases" are hard-coded to be those databases that were available at the time the task was created. It seems any newly created databases don't appear to be in the list. If I attempt to edit the task and select the "These databases:" option, the newly created databases aren't even in the list.
Is there some way to have the task refresh the list of the databases available for backup? Ideally, I'd like any newly created databases to get backed up automatically without having to modify the task.
Thanks for your help,
Jonathan.
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 2000.086.3959.00 (srv03_sp2_rtm.070216-1710)
Microsoft MSXML 2.6 3.0 4.0 6.0
Microsoft Internet Explorer 7.0.5730.11
Microsoft .NET Framework 2.0.50727.42
Operating System 5.2.3790
View 6 Replies
View Related
Feb 9, 2004
the problem is
source:kernel
backup medium ::reportloerror:write failure on backup device\. ape0.operating system error 23(data error(cyclic reduncancy check));
View 1 Replies
View Related
Mar 27, 2008
Can any body help with sample code to backup (sql server 2005 express)database using VB.net on click of a button?
Thanks
View 2 Replies
View Related
Apr 24, 2008
hi can any one guide me how to take database back up from sql server 2005 using visual studio frame work 2008
View 2 Replies
View Related
Nov 8, 2005
Hi everyone,
I am working in a company where data is changed daily (IT department of a shopping center) where item prices change everyday, the quantity available in stock vary daily,...What is the scenarios available for the back up on SQL Server 2000 (I am a developer not a database administrator, but I have a task to do which is to make a back up for the critical data) .
could u help me with some links or idea.I was thinking of doing a full back up one time everyweek and daily I will do a differential backup?is that the best solution?Thanks.
View 1 Replies
View Related
Apr 24, 2007
Hello,I'm trying to create a simple back up in the SQL Maintenance Plan that willmake a single back up copy of all database every night at 10 pm. I'd likethe previous nights file to be overwritten, so there will be only a singleback up file for each database (tape back up runs every night, so each daysback up will be saved on tape).Every night the maintenance plan makes a back up of all the databases to anew file with a datetime stamp, meaning the previous nights file stillexists. Even when I check "Remove files older than 22 hours" the previousnights file still exists. Is there any way to create a back up file withoutthe date time stamp so it overwrites the previous nights file?Thanks!Rick
View 5 Replies
View Related
Jun 9, 2015
I need to run two reports each of A5 Size to run back to page and print on single A4 paper means in 1st half Sale bill will be printed and in second half Gate Pass Will Be Printed both report will be on same page and size and shape should be maintained. How to do it.
View 4 Replies
View Related
Aug 27, 2007
Hi all,
I have back up job that runs to back up Cube daily but lately it is failing and gives error bellow:
The operation has been cancelled. at Microsoft.AnalysisServices.Xmla.XmlaClient.CheckForSoapFault(XmlReader reader, XmlaResult xmlaResult, Boolean throwIfError) at Microsoft.AnalysisServices.Xmla.XmlaClient.CheckForError(XmlReader reader, XmlaResult xmlaResult, Boolean throwIfError) at Microsoft.AnalysisServices.Xmla.XmlaClient.SendMessage(Boolean endReceivalIfException, Boolean readSession, Boolean readNamespaceCompatibility) at Microsoft.AnalysisServices.Xmla.XmlaClient.SendMessageAndReturnResult(String& result, Boolean skipResult) at Microsoft.AnalysisServices.Xmla.XmlaClient.Execute(String command, String properties, String& result, Boolean skipResult, Boolean propertiesXmlIsComplete) at Microsoft.SqlServer.Management.Smo.Olap.SoapClient.ExecuteStatement(String stmt, StatementType stmtType, Boolean withResults, String properties, String parameters, Boolean restrictionListElement, String discoverType, String catalog) at Mi. The step failed.
But if i run that job manually it runs fine(successfully)
What could be the problem!!
thanks
View 1 Replies
View Related
Dec 24, 2006
I'm pulling a "Number (8)" data type field for a date (formatted YYYYMMDD) from a Oracle 9i database. When the value is inserted into the database it is set a zero (A non-null database for the most part), otherwise it is for example 20061224. If the date field has a value the date is displayed correctly, but if it is zero then I get the "#Error" message.
Here is one of many iif expressions I've tried.
=iif(Len(CStr(Fields!DTE_MAILED.Value)) = 8,
((CStr(Fields!DTE_MAILED.Value)).Substring(4,2) + "/" + Right(CStr(Fields!DTE_MAILED.Value), 2) + "/" + Left(CStr(Fields!DTE_MAILED.Value), 4))
,
Nothing)
Now I've returned the value with out any formatting done to the string, and it will return "0"(zero) or a number. I've returned the lengths of the returning value and it comes back "1" or "8". I read a lot of previous posts and I thought at first that it was because I was trying to do a substring function on the zero value getting a index error. So I've changed the iif test condition many different ways with no prevail. I read a previous post where someone ended up doing his work in his SQL, but I would like to find out how to do this in the report. This is a simple expression, so I feel like there is something obvious I don't know maybe something with the format mask.
All help will be appreciated!
View 3 Replies
View Related
Dec 8, 2004
Hi, i have one database question here. Let me describe my situation first:
i have two different hard disk drives, here i call it HDD1 and HDD2. i want to format my HDD1, but all my database tables are stored in HDD1. i want to know is there any way for me to backup my database table to HDD2, and restore it back later to HDD1.
thanks to you all.
View 3 Replies
View Related
Mar 26, 2001
I am trying to back up database to a different server. I am able to map the serve to my current ones, however, when I go to Enterprise Manager - back up DB, I can not see the mapped drive from back up file location, I wasn't able to see any other disk location but the local drives.
Can somebody tell me how can I back up database to a different server from Enterprise Manager or any syntax?
Thanks.
View 10 Replies
View Related
Feb 8, 2001
Hi all,
I'm getting the following error message in NT event view:
Error: 9002, Severity: 17, State: 2
The log file for database 'db_sys' is full. Back up the transaction log for the database to free up some log space.
But I don't know how to back up the transaction log for the database.
Do I need TRUNCTE LOG (in E.M) to free up some log space?
I only know back up all the database using ALL TASKS -> BACKUP DATABASE in E.M. Please help me. Thanks in advance.
TH
View 1 Replies
View Related
Jul 10, 2006
I had to transfer my database from one server to another. Both are running SQL 2000. I backed the database up and moved it to the new server however when I try to do a restore I get the following message:
The media set for database "xxx' has 2 family members but only 1 are provided. RESTORE DATABASE is terminating abnormally.
I did some searching and found a couple of posts that mentioned something about the back up including 2 files.
My problem is that the machine I backed this up from crashed when it was shut down and would not reboot so all of the data and the original database do not exist. Is there any hope of restoring this database. It is pretty critical.
Thanks,
Melissa :-)
View 20 Replies
View Related
Feb 8, 2008
Hi,
I have a report deployed and working. Now I need to change it but I lost the source (RDL).
Can I get the RDL back from the reportServer database? How?
Help is really appreciated
Tks in advance,
DD
P.S: I'm Using SQL Server 2000
View 3 Replies
View Related
Aug 29, 2007
I am trying to pass back the number of errors encountered by a child package to the Parent package. I have a script within the child package, which will set the value of the Parent package's variable (ChildErrCount). However, I have no idea how to access the Child package's Errors collection to get a count.
Any ideas? Has someone figured out a way to reference the current package's properties (besides what's available from Dts.* ?
Thanks!
View 11 Replies
View Related
Jan 29, 2007
Hi,
I backed my sql server database on Fri at 3:15pm and then tried importing some tables individually from a different database and but that didnt work out too good, so is there a way i can just restore particular tables from the backup.
any help will be appreciated.
regards,
Karen
View 4 Replies
View Related
Apr 24, 2007
I developed an asp.net application in visual web developer 2005 express edition and SQL sever 2005 express with Advanced services. The application has been deployed and iam wondering what tools are availabel to for backing up my data. Are there any tools i can use to back-up my database. Iam not talking of third party tools but tools a vailable in sql sever 2005 express with advanced services or visual web developer express.
OR can write a vb.net Sub procedure that i run and have my database backed up. If so where can i start or what other options may i explorer.
View 4 Replies
View Related
May 18, 2007
I need to back up a production database on one server and then copy it to a test server wherel it will be restored. The problem is that I don't know where to move the file to on the production server before I restore it. Is there a special folder I need to copy the file to? I see a folder named ProgramFilesMicrosoft SQL Server but beyond that I have no idea where to copy the file so that it can be restored?
Can someone help me out please?
View 1 Replies
View Related
Jan 31, 2000
Hello All!
Here is an intresting and challenging question to you all.
One of our idiot admin happens to reinstall the SQL Server with out realizing that other are have databases on that server.
I have the MDF files on the server. Is there any way I can create the databases and point to that MDF files so that they can have the data and the table structures back. Itired to create the database that way the databse gets created but its having trouble actibvating those files. Some please help.
Regards
View 1 Replies
View Related
Oct 10, 2000
I am trying to pass a datename in to a database backup. The date is to be retrieved from the 'monthname' column which is stored in the 'tblbill' table. I have included my ridiculous bit of code below (which funnily enough does not work!!) just so that you can see what I am trying to do. Can anyone help?
DECLARE @name varchar(10)
backup database Bill to Disk ='c:@name.dat' with init
@name =select distinct monthname from tblbill where monthname is not null
cheers,
Dennis
View 2 Replies
View Related
Oct 14, 2006
I've got a 9gig DB which when backed up using the gui comes to 5gigs.When backed using the SQL "backup database" command it comes to 20gigs.Can someone suggest a good reason for the difference?
View 2 Replies
View Related
