I have made numberous attempts to install SQL 2005 SP2 on my Developer version. When using windows update, it runs for about 30 minutes then fails. When I click the Failed Icon in WU panel, it returns a blank window.
I have googled this but found no pertinent solution.
Thanks!
Hello everybody!
I have a publisher running SQL 2005 and subscribers running SQL EXPRESS in a merge replication. The subscriptions are pull subscriptions using web synchronization. Every time I do a new release of the database schema on publisher and drop/recreate replication I seem to have a problem.
When a subscriber tries to synchronize first time after this (the datbase on subscriber is dropped/re-create prior to this syncronization) it always results in a error saying something about "unrecognized or invalid response" after sitting there for some time. Several subsequesnt tries give "another job for this subscriber is already running on publisher", and finaly after a few minutes it synchronizes correctly and from this point on everything works perfectly until the next release. This happens with every single subscriber.
As far as I understand, what is happening is that when the merge agent connects to the publisher from the subscriber via web replication the publisher kicks off a job to generate initial dynamic snapshot for this subscriber. This is taking long time. During this time the web request times out, which results in the first error I see. When I try to connect several mre times, the job is still running, which gets me the subsequesnt errors. And finally when creating of the initial dynamic snapshot is finished, I can run the synchronization successfully.
The question is: Is there anything I can do on the publisher in automated manner prior to the first synchroniztion that would help me top resolve this problem? My guess would be that if I run jobs
dyn_PUBLISHER-DATABASE-PUBLICATION-num__SUBSCRIBER_anothernum for each subscriber and wait until they've finished before starting sinchronization from the subscriber, it would solve my problem. How ever I'm not sure how to run these jobs in automateed manner (because their name may differ) and how can I make sure that all the jobs are finished.
There may be other way to achive what I want also, please let me know what you think.
EDIT:
Also using this method http://technet.microsoft.com/en-us/library/ms151260.aspx I guess underneath, it starts all the same jobs that I mentioned above, but then again, this is neither automatic nor there is an apparent way to tell when all theses job are finished. What I want to do is to run a script and be sure that once the script has finished all the snapshots are there and I can start synchronizing from the subscribers without fear of failure.
Does somebody know if it's possible to ban an IP address in the sql server, from somebody who makes 5 attempts to log in ?
Because I saw in my computer management / windows logs / application that somebody is trying to guess the password of 'sa'. Every second I get 5 attempts to login ...
regards
Hi!
I'm trying to handle errors in SSIS package. I created Scrip task where I do following:
-----------
If CInt(Dts.Variables("BADROWSFILE").Value) <> 0 Then
Dts.Variables("ERROR_MSG").Value = "Errors in input file. Error count: " + CStr(Dts.Variables("BADROWSFILE").Value) + ". See log table and file for more info."
Dts.TaskResult = Dts.Results.Failure
Else
Dts.TaskResult = Dts.Results.Success
End If
---------
Then in package level OnError I added Execute SQL Script task where I pass ERROR_MSG as Input Parameter.
The flow gets to the SQl task and this is what I'm getting:
Error: 0xC001405B at Log error: A deadlock was detected while trying to lock variable "User::ERROR_MSG" for read access. A lock could not be acquired after 16 attempts and timed out.
Error: 0xC00291EA at Log error, SQL Task: Variable "User::ERROR_MSG" does not exist.
The variable does exist though...
Any idea?
Dima.
I'm running into a a problem with Full Text searching. I've narrowed my code that produces the error down to this:
Code Block
SELECT Content
FROM Text
JOIN CONTAINSTABLE(Text, Content, 'lake') AS A
ON A.[KEY]=Text.ID;
and here is how I initiated the full text for the table:
Code Block
sp_fulltext_database 'enable'
sp_fulltext_catalog 'theCatalogSearch','create'
sp_fulltext_table 'Text','create','theCatalogSearch','PK_Text'
sp_fulltext_column 'Text','Content','add'
sp_fulltext_table 'Text','activate'
sp_fulltext_table 'Text','start_full'
sp_fulltext_table Text, 'Start_change_tracking'
sp_fulltext_table Text, 'Start_background_updateindex'
The first time I run it in the SQL query analyzer it sits there for about 30 seconds and then gives me "Timeout expired (error - 2147217871)." After the first query attempt I can run it as many times as I want and it will work fine (no errors) ... But if I wait for about 30 minutes and then try it again, it will give the error again just on the first try. I've tried using search words that exist and ones that don't exist in the db and they both give the same error, so it's not that it's trying to return too many rows.
I'm using Microsoft SQL Server 2005. The code I'm writing is pretty basic so maybe it's the way that the database is set up or the way I initiated the full text tables? Any help would be greatly appreciated. Thank you.
Dears,
i have a problem when i setup workstation componant in sql 2005 it fail when the setup remove the backup file in the end of setup and give me this
if anyone no what id the problem solve it to me
thanks
I'm running into a problem with Full-Text searching. I have a procedure which uses a full-text search.
When I run it in SQL query analyzer €“ it runs immediately.
I exec this procedure from my ASP page and it returns timeout error.
After the first query attempt I can run it (executing the ASP-page) as many times as I want with different search words and it will work fine (no errors) ... But if I wait for about 30 minutes and then try it again, it will give the error again just on the first try.
I've tried using search words that exist and ones that don't exist in the db and they both give the same error, so it's not that it's trying to return too many rows.
I'm using Microsoft SQL Server 2005.
Any help would be greatly appreciated.
Thank you.
Trying to set up a tranform task between a mysql db using and ADO.NET connection and sql server.
My query to pull from the mysql db is something like "select x,y,z from table where last_updated" > @User::LastUpdated. This command is set up as an expression for the Data Flow Task and is the value for the [DataReader Source].[SqlCommand]
I have two questions.
Why does the package attempt a query against the mysql database all the time?
And Why is the query attempting to pull the entire table instead of having any regards for my where clause?
I've even added where last_updated > greatest('2006-08-15', '" + @User::LastUpdated to attempt to get it a where clause even when the parameter isn't set yet.
What is the trick? This is not feasible when pulling from multi-million row tables.
Greetings,
First I am fairly new to SQL Server 2005 Clustering so this is why I was to see if any of you might be able to help me.
Are current setup is as follows:
CRM1 SERVER 2K3 R2 xxx.xxx.xxx.74
CRM2 SERVER 2K3 R2 xxx.xxx.xxx.75
HP MSA1000 xxx.xxx.xxx.75
MSDTC IP xxx.xxx.xxx.77
SQL INSTANCE xxx.xxx.xxx.78
Now are CRM guys are trying to connect to xxx.xxx.xxx.78 for there SQL instance or RDP into this ip address and they can’t…Now the question is should they be able yto logon to the SQL Instance via RDP?
Thanks,
CujoX
Posted - 09/07/2005 : 15:32:52
--------------------------------------------------------------------------------
Hi, i need help about restore a DB
I did a backup of a database using SQL Server Management Studio, but when i try to restore my database now, i get this error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Restore failed for Server 'Athenas'. (Microsoft.SqlServer.Smo)
System.Data.SqlClient.SqlError: The media set has 2 media families but only 1 are provided. All members must be provided. (Microsoft.SqlServer.Smo)
What do i doing so bad??
Thanks for ur opinions and help.
Regards
------------------------------------------
seyha moth
I can't uninstall a default instance of SQLServer 2005.
i have instaled a MSDE2000 then i uninstall it and when a try to uninstall the default instance of SQLServer2005 a have a error the log following:
-----------------------------------------------------------------------------------
Instance Name = MSSQLSERVER
Trying to find install through Instance Name
Install Type = 1
If possible, determine action
Failed to determine installSkuId due to property load failure.SKU is set to SKU_EXPRESS.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Oct 26 16:37:20 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "InstallSku" {"SetupStateScope", "", ""} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Oct 26 16:37:21 2005
Function Name: SetupStateScope.InstallSku
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupStateScope"
Machine = EMILIO, Article = WMIServiceWin32OSWorking, Result = 0 (0x0)
Machine = EMILIO, Article = WMIServiceWin32CompSystemWorking, Result = 0 (0x0)
Machine = EMILIO, Article = WMIServiceWin32ProcessorWorking, Result = 0 (0x0)
Machine = EMILIO, Article = WMIServiceReadRegWorking, Result = 0 (0x0)
Machine = EMILIO, Article = WMIServiceWin32DirectoryWorking, Result = 0 (0x0)
Machine = EMILIO, Article = WMIServiceCIMDataWorking, Result = 0 (0x0)
Machine = EMILIO, Article = XMLDomDocument, Result = 0 (0x0)
Failed to determine installSkuId due to property load failure.SKU is set to SKU_EXPRESS.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Oct 26 16:37:20 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "InstallSku" {"SetupStateScope", "", ""} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Oct 26 16:37:21 2005
Function Name: SetupStateScope.InstallSku
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupStateScope"
Machine = EMILIO, Article = Processor, Result = 0 (0x0)
Machine = EMILIO, Article = PhysicalMemory, Result = 0 (0x0)
Machine = EMILIO, Article = DiskFreeSpace, Result = 0 (0x0)
Machine = EMILIO, Article = OSVersion, Result = 0 (0x0)
Machine = EMILIO, Article = OSServicePack, Result = 0 (0x0)
Machine = EMILIO, Article = OSType, Result = 0 (0x0)
Machine = EMILIO, Article = AdminShare, Result = 0 (0x0)
Machine = EMILIO, Article = PendingReboot, Result = 0 (0x0)
Machine = EMILIO, Article = IEVersion, Result = 0 (0x0)
Machine = EMILIO, Article = DriveWriteAccess, Result = 0 (0x0)
Machine = EMILIO, Article = COMPlus, Result = 0 (0x0)
Machine = EMILIO, Article = ASPNETVersionRegistration, Result = 0 (0x0)
Machine = EMILIO, Article = MDAC25Version, Result = 0 (0x0)
Machine = EMILIO, Article = SKUUpgrade, Result = 0 (0x0)
HOW I CAN RESOLVED THE PROBLEM THKS,
Emilio Ferreira
I have been attempting to install Backup Exec 11D on a Win2K3 std server running Exchange 2003 Ent.
Used to have 10D installed and did an uninstall from add remove programs then tried to install 11D
When the setup runs it attempts to install the SQL 2005 Express and then fails with the dialog that pops up
SQL Server Setup unexpectedly Failed. For more information, review the setup summary log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGSummary.txt
I have review the summary .TXT which contains
Microsoft SQL Server 2005 9.00.2047.00
==============================
OS Version : Microsoft Windows Server 2003 family, Standard Edition Service Pack 2 (Build 3790)
Time : Sun Feb 10 18:05:02 2008
That is all it has in it.
Can anyone out here help me with this issue.
Thank You in advance
Jeff
jprewitt@ucsd.edu
Can anyone help me to create a URL decode user defined function in SQL Server 2005?
I want to use the method [System.Web.HttpUtility.UrlDecode] in .net framework, and I try to add it as a CLR function to SQL Server but always fail. It depends on [System.Web.dll], and when I try to create assembly [System.Web] using following scripts, it will fail:
CREATE ASSEMBLY [System.Web] FROM 'C:WindowsMicrosoft.NETFrameworkv2.0.50727System.Web.dll'
WITH PERMISSION_SET = UNSAFE
Error:
CREATE ASSEMBLY for assembly 'System.Web' failed because assembly 'System.Web' is not authorized for PERMISSION_SET = UNSAFE.
The assembly is authorized when either of the following is true:
the database owner (DBO) has UNSAFE ASSEMBLY permission and the database has the TRUSTWORTHY database property on;
or the assembly is signed with a certificate or an asymmetric key that has a corresponding login with UNSAFE ASSEMBLY permission.
If you have restored or attached this database, make sure the database owner is mapped to the correct login on this server. If not, use sp_changedbowner to fix the problem.
I have searched the MSDN and then add following scripts before mine:
ALTER DATABASE [DatabaseName] SET TRUSTWORTHY ON
CREATE ASYMMETRIC KEY SystemWebKey FROM EXECUTABLE FILE = 'C:WindowsMicrosoft.NETFrameworkv2.0.50727System.Web.dll'
CREATE LOGIN CLRLogin FROM ASYMMETRIC KEY SystemWebKey
GRANT UNSAFE ASSEMBLY TO CLRLogin
But unfortunately it fails again with same error.
Hi everyone
i get an error messgae running the following code
DECLARE @mailist VARCHAR(max)
SET @mailist=''
SELECT TOP 1 @mailist=@mailist + email +';'
FROM
email.dbo.mytable
SET @mailist=STUFF(@mailist,LEN(@mailist),1,'')
SET @mailist='''' + @mailist + ''''
EXEC msdb.dbo.sp_send_dbmail
@profile_name='my_mail_profile',
@recipients=@mailist,
@subject='mysubject',
@body_format='html',
@body=
'
<html>
<head>
<title>
problems with send_dbmail
</title>
</head>
<body>
this is not working
</body>
</html>
'
The error says:
quote:
Syntax error in parameters or arguments. The server response was: 5.5.4 Invalid Address)
At the other hand, if i assign a straightforward @recipints address such as
EXEC msdb.dbo.sp_send_dbmail
@profile_name='my_mail_profile',
@recipients=my@mail.com
It works
Anybody know why ?
Thanks
Hi,
A few months ago, I was trying to install SQL Server 2005 SP2 on a cluster (Active-Active), the Cluster has 3 instances, 2 lives in one node and the other one in the other node. When I try to make the deployment an error message appear, I do not have the error right now but it€™s something like €śCould not connect to the passive node, installation failed€?. The worst part of the error was all instances shut down and I couldn€™t bring on line and I have to reinstall all instances. I need to install SP2 but I€™m a little afraid fail again. Do you know the best way to deploy the SP2 on a cluster? Maybe move all instances in one node before install SP2? Can you help me with your comments. Do you think I have problems with the windows cluster?
Thanks and Regards,
Hi all,
When i attempted to connected to Microsoft SQL Server 2005 Express via ASP.NET 2.0 application, it seems to throw the following error.
I had set up the Protocols for Express (TCP/IP and Named Pipes are both enabled) to allow remote connections using both TCP/IP and named pipes.
Login failed for user ''. The user is not associated with a trusted SQL Server connection.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection.
Source Error:
The source code that generated this unhandled exception can only be shown when compiled in debug mode. To enable this, please follow one of the below steps, then request the URL:
1. Add a "Debug=true" directive at the top of the file that generated the error. Example:
<%@ Page Language="C#" Debug="true" %>
or:
2) Add the following section to the configuration file of your application:
<configuration>
<system.web>
<compilation debug="true"/>
</system.web>
</configuration>
Note that this second technique will cause all files within a given application to be compiled in debug mode. The first technique will cause only that particular file to be compiled in debug mode.
Important: Running applications in debug mode does incur a memory/performance overhead. You should make sure that an application has debugging disabled before deploying into production scenario.
Stack Trace:
[SqlException (0x80131904): Login failed for user ''. The user is not associated with a trusted SQL Server connection.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734883
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
ASP.sqlquerytool_aspx.Button_Click(Object s, EventArgs e) +49
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
I have been battling with error for 5 solid hours. Please help me
thank you in advance
I tried installing SQL 2005 Dev Edition on my Win 2000 Professional machine. That failed. But now I cannot send out emails or even open a simple Email task from DTS. This is something that worked perfectly fine before I attempted the SQL 2005 installation. It seems that the SQL 2005 installation somehow messed up the the MAPI profile. The exact error message that I get when trying to execute or open a Email task in DTS is: CAnnot load MAPI Interface layer for DTS. Please make sure that semmap90.dll is installed.
View 11 Replies View RelatedI am in the process of designing a database infrasture layout that can virtually scale to an very large number of servers in efforts to improve performance. The Scale-out architecture vs. grid computing (something like Oracle RAC) seems to be the way to go. It may take a lot more work up front, but it seems very flexible in the long run.
One of the issues that I am trying to tackle is how should I grow this thing. Right now, I have one single 4 way server running SQL 2005 Ent. edt. We are planning on getting a second server as well as a Enterprise level San solution.
With my 2 goals in mind (Scale out architecture and High Avail) should I bring this second server online as a passive cluster node, or should I partition out the data across both nodes. Will clustering even be part of my fault tolerence plan or should I use replication?
Its hard to find a good answer as what is the *best* way to make this happen.
Any insight will be greatful...
Thanks!
Eric Elliston
http://www.rbdstudios.com
When the setup program tries to start the database service (the last step of installation), it indicates an error 29503.
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (17058)
Any help would be appreciated.
I've been trying to install the following update: Microsoft SQL Server 2005 Express Edition Service Pack 2 (KB 921896). I always recieve the following error: 2B22,
Please advise on a fix for this.
Regards,
I simply made my script task (or any other task) fail
In my package error handler i have a Exec SQL task - for Stored Proc
SP statement is set in following expression (works fine in design time):
"EXEC [dbo].[us_sp_Insert_STG_FEED_EVENT_LOG] @FEED_ID= " + (DT_WSTR,10) @[User::FEED_ID] + ", @FEED_EVENT_LOG_TYPE_ID = 3, @STARTED_ON = '"+(DT_WSTR,30)@[System::StartTime] +"', @ENDED_ON = NULL, @message = 'Package failed. ErrorCode: "+(DT_WSTR,10)@[System::ErrorCode]+" ErrorMsg: "+@[System::ErrorDescription]+"', @FILES_PROCESSED = '" + @[User::t_ProcessedFiles] + "', @PKG_EXECUTION_ID = '" + @[System::ExecutionInstanceGUID] + "'"
From progress:
Error: The Script returned a failure result.
Task SCR REIL Data failed
OnError - Task SQL Insert Error Msg
Error: A deadlock was detected while trying to lock variable "System::ErrorCode, System::ErrorDescription, System::ExecutionInstanceGUID, System::StartTime, User::FEED_ID, User::t_ProcessedFiles" for read access. A lock could not be acquired after 16 attempts and timed out.
Error: The expression ""EXEC [dbo].[us_sp_Insert_STG_FEED_EVENT_LOG] @FEED_ID= " + (DT_WSTR,10) @[User::FEED_ID] + ", @FEED_EVENT_LOG_TYPE_ID = 3, @STARTED_ON = '"+(DT_WSTR,30)@[System::StartTime] +"', @ENDED_ON = NULL, @message = 'Package failed. ErrorCode: "+(DT_WSTR,10)@[System::ErrorCode]+" ErrorMsg: "+@[System::ErrorDescription]+"', @FILES_PROCESSED = '" + @[User::t_ProcessedFiles] + "', @PKG_EXECUTION_ID = '" + @[System::ExecutionInstanceGUID] + "'"" on property "SqlStatementSource" cannot be evaluated. Modify the expression to be valid.
Warning: The Execution method succeeded, but the number of errors raised (4) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
And how did I get 4 errors? - I only set my script task result to failure
Hello all,
I have tried to install SQL Server 2005 Standard edition with CLUSTERING. I faced a problem and everything rolls back.
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
SQL Server Setup was unable add user domain1xyz to local group domain1IT Security Admin-Group.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=29512&EvtType=sqlca%5csqlsecurityca.cpp%40Do_sqlGroupMember%40Do_sqlGroupMember%40x6ba
I have refered to PostI=1659185 posted by Fly and it still won't be able to fix my problem.
I have added LOCAL SERVICE into the local group (SQLServer2005MSFTEUser$AAA$MSSQLSERVER), but it still can't work.
Please can someone help me on this. Thank a lot....
I tried to install SQL Server 2005 (x64) Standard Edition on Windows Server 2003 R2 (x64) Standard Edition. My box meet the requirement. But I got the following error when the installing progress was just about to begin:
Error 1016:Could not access network location k.3643236F_FC70_11D3_A536_0090278A1BB8]URTVersio.
(this is exactly what i saw in the system log)
what does it mean?? i am totally confused...what the hell is the k.3643236F_FC70_11D3_A536_0090278A1BB8]URTVersio????
Can anybody give me a hand? thanks...
Hi y'all,
I'm facing a database data transmission problem during synchronysing. When dts fails i need a better solution instead inconsistent data.
I'm looking for data comparer for sql server where i have total control of my actions.
Any suggestions.
THanks in advance!
Can anyone direct me to a good resource for setting up SQL2k in a failover cluster. I am trying to do this without a shared disk array, and need more info.
Thanks.
Does anyone know of a Fail Over Document for SQL Server 2000 Enterprise edition?
View 1 Replies View RelatedHI Friends
One of server my job is getting fail. It will showing log speace is full but log speace is 24GB But actually my log file actual speace is 30GB How can i handile this isssue plz help me urgent
Thanks
MS
Hi
I have scheduled a job and the job is getting failed.I have scheduled two DTS packages in the job.But when I run the DTS Packages separately its running fine without throwing any errors.But when the Job fails I am getting the error message like "Dts package not found"
The error message which I am getting while the Job fails is
"Executed as user: TESTsqlservice. DTSRun: Loading... Error: -2147217900 (80040E14); Provider Error: 14262 (37B6) Error string: The specified DTS Package ('Name = 'DTS_MASTER'; ID.VersionID = {A35AEABF-8F05-41B5-A4C9-47F57A3208B9}.{[not specified]}') does not exist. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0. Process Exit Code 1. The step failed. "
Can anybody pls help me on this.
how do i fix this? syntax pls!!
There was a problem running the DBCC.
SQL Server returned the following error message:
Table Corrupt: Object ID 213575799, index ID 2, page (1:951), row 68. Test (ColumnOffsets <= (nextRec - pRec)) failed. Values are 21 and 0.
I am trying to set up a DTS to transfer logging data from one server to another.
The record may already exist at the destination causing a primary key violation. I do not want this error to cause the entire DTS to fail.
When I execute the DTS I created by right clicking and selecting "Execute Package" it shows me 2 errors. Although there are 2 errors the rows that do not have a primary key violation are successfully transfered to the destination database.
Here are the 2 errors I see:
Error 1:
Error at Destination for Row number 97. Errors encountered so far in this task: 97.
The statement has been terminated.
Violation of PRIMARY KEY constraint 'PK_event'. Cannot insert duplicate key object 'event'.
Error 2:
Error at Destination for Row number 198. Errors encountered so far in this task: 198.
The statement has been terminated.
Violation of PRIMARY KEY constraint 'PK_eventDetail'. Cannot insert duplicate key object 'eventDetail'.
These errors make sense, there were 97 duplicate lines in the event table and 198 duplicates in the eventDetail table.
This is the behavior I want. New rows are copied to the destination database.
When I schedule the DTS as a Job in the Enterprise manager things change. When the DTS is executed as a Job (as opposed to me right clicking and selecting "Execute Package"), the job reports a failure and none of the new rows are transfered to the destination database.
Why does the DTS transfer the rows that do not violate the Primary Key constraint when I manually execute it and not when it is executed as a job?
How can I get the DTS to function as desired?
Thanks,
Andy
Hi,
i m facing this error when running DTS on IDENTITY(1,1) Field.
how can this field increment automatically ???
Step Error Source: Microsoft Data Transformation Services (DTS) Data Pump
Step Error Description:The number of failing rows exceeds the maximum specified. (Microsoft Data Transformation Services (DTS) Data Pump (80040e21): Insert error, column 14 ('s_no', DBTYPE_I4), status 10: Integrity violation; attempt to insert NULL data or data which violates constraints.) (Microsoft OLE DB Provider for SQL Server (80040e21): Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.)
Step Error code: 8004206A
I'm trying to get a job to fail using a stored procedure command.
I have been using:
EXEC sp_stop_job @job_name = 'Archive Tables'
But this command only cancels the job, I want to the job to report back a failure.
Is there a sp_fail_job, or a sp_quit_job or something?
Thanks in advance
i tried to install sql 2005 and first time succesfully, but not able to see "Enterprise" manager even during installation i select all features.i was told unstall Visual Studio MS Express and try again. it didn't work neither. in the end i have unstalled SQL, Express SQL from Visual Studio, delete SQL from Programm Files and even clean up register still the same problem. am i doing something wrong?
thank you