New to SSIS...
I created a new package with a source and destination and manually created the output column with data type, etc. Works. The issue is say the table has 200 columns to export.. I dont want to create these by hand. How can I just say export them all to csv format and not have to specify and map each and every column?
Hi,I use SqlDataReader to read one row from database and than set some properties to values retrieved like this:string myString = myReader.GetValue(0) // this sets myString to first value in a rowIf, however, I change order of columns returned by stored procedure myString would be set to wrong value. Is there a way to do something like this: string myString = myReader.GetValue["ColumnName"];
View 7 Replies View RelatedHi
I have 2 tables defined as follows:
Table1 = uid, Field1, Field2, Field3 ... Fieldn, FormUID
Table2 = FormUID, Label, Position
When I query Table1 I would like to replace the column name of Field1...Fieldn with the Label from Table2 where the Position = n value of Field lable
e.g. lets say Table2 contains the following
1, customerName, 1
1, customerTitle, 2
1, customerDOB, 3
and Table1 might contain
1, Paul Jones, Mr, 21/09/1987, 1
when I query Table1 I would get
uid = 1, Field1 = Paul Jones, Field2 = Mr, Field3 = 21/09/1987
what I would like to get is
uid = 1, customerName = Paul Jones, customerTitle = Mr, customerDOB = 21/09/1987
I have up to 20 Fieldn columns so need to do this for all columns even if there is no matching columns.
any help would be great
regards
Hi Guys
I have a table that contains codes for commodities.Some of the codes in this table have changed and some of them have not.So now i want to design a solution that enable me to map the new codes in a different mapping table to the old ones in the other table.I also want to retain the old codes because most of the archived data used the old codes.
Where there is no new code, the current code is being retained.How do i design my table and queries so that i can use the new codes as if i was using the old code.I want to select products with a certain code but using the new code and mapping to the old codes or vice versa.
The structure of the data is like this.
Code Name
AA AA
AL Aluminium
ALM ALM
ALT Aluminium in tonnes
AR AR
AUD Australian Dollars
AUJPY AUJPY
CAQ CAQ
CC CC
CCF CCF
CER Carbon Emmission Reduction
The mapping table is like this:
XAA AA
XAL AL
XMA ALM
XAL ALT
XAR AR
In god we trust,everything else we test.
The Source Data is
ID--VAL1--VAL2--VAL3--VAL4--VAL5--VAL6
1---151---- ----- ----- Y----- -----
2---151---- -----Y----- -----Y-----Y
3---152----Y----- ------ ----- ------
4---152---- -----Y------ ----Y------
The Expected Output should be
ID--VAL1--VAL2--VAL3--VAL4--VAL5--VAL6
1--151----- ----Y------Y-----Y-----Y
2--152-----Y-----Y------ -----Y-----
Hi,
I am new to using SSIS. I am supposed to move data from a text file to a SQL Server table. I did that successfuly when I simply mapped column one-to-one, but when I could not conditionally map one column to different destination column depending on some criteria.
Example: I want to make SSIS map the column A depending on the value of field X:
If X= Value1 Map A -> B
if X= Value2 map A -> C and so on.
This is an urgent situation. I will really appreciate instant help.
Thanks,
Aref
can somebody show an example of how to map source and destination columns when uploading a file to sql server?
Also, please send me the mapping when i want to map source to different destination columns.
I had to use use ssis 2005 in a short project recently & had littletime to work it out. I was importing a whole bunch of flat files intoSQL Server tables with many derived columns and transformations inbetween.It seems to automatically map columns from the flat file to columns inthe sql table where the names of the columns are equal. But can italso do it automatically on position, so flat file column 1 goes tosql table colum 1, etc, etc? In each flat file I had to manually clickand drag the columns across to map them which took a very long time asthere were hundreds of columns in some tables!Thanks.
View 3 Replies View Related
Hi ,
I have a Package Consisting of the following (tried to portray the flow below)
1) OLE DB Source (Which I set the sql command for in code)
|
/
2) Rowcount Transform (Counts the Source Records)
|
/
3) Derived Column (Adds An AuditJobID ,ExecutionStartDate)
|
/
4) Conditional Split (Splits New and Updated Record - My Implementation of SCD)
/
/ /
5) Rowcount Transform (Counts the New Records) Rowcount Transform (Counts Update Records)
/
/ /
6) OLEDB Destination OLEDB Update Command
I am trying to map the columns in the "OLEDB Destination" with c# ,with the following
IDTSInput90 input = oledbDestination.InputCollection[0];
IDTSVirtualInput90 vInput = input.GetVirtualInput();
As soon as I call the input.GetVirtualInput(); method I get a com exception ,Seem that I am missing a
VirtualInputColumnCollection on the component ,but can't seem to figure out why.
When I drop the all the other components and only keep the OLEDb Source and OLEDB Destination with a flow between them , the call to input.GetVirtualInput() doe not fail with a com exception and I can mapping normally
I really need some guidance on the above.
Regards
Cedric
I have set up a script task in one of my packages that I have set up to modify another package right before running it. This package is nothing more than a data flow task that transfers rows via an sql command from one table into another. The strange thing is I have gotten it to work with some tables but not with others. T
he script bombs out in the loop where i map all of the columns found below, where i use MapInputColumn with the error HRESULT: 0xC0010009 On Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSExternalMetadataColumnCollection90.get_Item(Object Index)
The thing is this happens after looping roughly 55 times but there are still about 100 columns that it needs to loop through still.
Code Block
Dim input As IDTSInput90 = data_destination.InputCollection(0)
Dim virtual_input As IDTSVirtualInput90 = input.GetVirtualInput
Dim input_column As IDTSInputColumn90
Dim virtual_column As IDTSVirtualInputColumn90
' Iterate through the virtual input column collection and map field names
For Each virtual_column In virtual_input.VirtualInputColumnCollection
input_column = inst_data_destination.SetUsageType(input.ID, virtual_input, virtual_column.LineageID, DTSUsageType.UT_READONLY)
inst_data_destination.MapInputColumn(input.ID, input_column.ID, input.ExternalMetadataColumnCollection.FindObjectByID(virtual_column.Name).ID)
Next
Just for kicks i removed the mapping portion of the code and left in the SetUsageType to see if it would update the available input columns in the destination. The script will then finish successfully but still only the 55 or so fields out of 155 are available in the input. So i then stepped through the script with the mapping portion still disabled and after it loops successfully, i call reinitialize meta data and it produces an error in the input_column variable: HRESULT: 0xC0047041.
I find it odd that this still reports to me that the script finished successfully and I also find it odd that this works fine on two other tables I've tested but not this one. Any insight would be greatly appreciated.
The only way to add a new column to an existing mapping that I know is to go to advanced editor and refresh. This however keeps only the default mapping (where the field names match), the rest is wiped out, so need to restore the mapping manually after that. Risky and annoying at the same time. Is there any alternative?
View 3 Replies View RelatedI need to perform this task. say I have a table that the columns are dates.
Table months:
[02-2015],[03-2015], [04-2015],[04-2015]....[02-2016].
When the new month comes I want the table to alter the columns automatically instead of manual how we do it now. The new Month table should delete [02-2015] and replace it with [03-2015].
table months:
[03-2015],[04-2015],[05-2015],[06-2015]....[03-2016].
Take a Dataflow Task, with an OLEDB Source Component and an OLEDB Destination Component in it. The Source component's Source is stored in a SQLQuery variable, and the Destination component's Destination is stored in a TableName variable. The Dataflow Task is put into an For Loop container.
I just want to do one thing:
In the For Loop, everytime it send a new value to the SQLQuery variable and the TableName variable, then I could use it to transfer many tables in a same logic.
My question is: Really, I could send new values to the variables and make it go. But everytime it says "The external metadata column collection is out of synchronization with the data source columns." Because the external metadata was recorded and not be change automatically everytime of Loop.
How to update the source columns'metadata automatically?
Hi Friends,
I have a small problem in parameter mapping for Execute SQL Task.
I am using a delete statement with 2 conditions.
Followed by another Execute SQL Task which contains commit statement.
delete from tname where c1 = ? and c2 =?
where c1 is number(4) datatype and c2 is of varchar2(20) datatype in oracle.
The connection manager i am using is ORacle OLE DB provider.
I am passing 2 global variables i.e g_v1 of Int32 and g_v2 of String Type.
In the parameter mapping of the Executing SQL task, i am mapping these 2 variables for
c1 and c2 and changed the datatypes inside parameter mapping as Numeric for c1 and Varchar for c2.
I also set the property as ByPassPrepare = True.
When i am executing the package i getting INVALID NUMBER ERROR.
i believe the SSIS is unable to perform the implict datatype converison.
For the next run, i changed the g_v1 varible datatype to Double and also i changed the parameter mapping for c1 as Doble datatype.
This time it is working fine. I can see the Green signal for the 2 SQL Tasks.
But when i connected to Oracle check the count in the table, the data is not getting deleted.
Also,
I set the property RetainSameConnection = TRUE for oracle connection manager.
I am not able to trace this logical error.
The same is working fine in my local machine.
But i am facing the problem when i deployed the same on the client machine.
Is there any problem with parameter mapping?
What should be equialent Datatype for Oracle NUMBER datatype that should be used inside the SSIS package while declaring the global variable and
inside the parameter mapping.
Any thoughts!
I'm in the process of converting legacy DTS packages to SSIS. I need to populate a table that has more fields than the source file. In DTS I did this with an ActiveX script. How do I go about doing this within SSIS.
In the ActiveX script most of the fields were defaulted with either spaces or zeroes.
One of the Destination fields needs to be incremented by 1 for each new record inserted.
Any help would be appreciated.
Thanks,
Jeff
Hello:
I am running into an issue with RS2k PDF export.
Case: Exporting Report to PDF/Printing/TIFF
Report: Contains 1 table with 19 Columns. 1 column is static, the other 18 are visible at the users descretion. Report when printed/exported to pdf spans 2 pages naturally, 16 on the first page, 3 on the second, and the column widths have been adjusted to provide a perfect page span .
User A elects to hide two of the columns, and show the rest. The report complies and the viewable version is perfect, the excel export is perfect.. the PDF export on the first page causes every fith column, starting with the last column that was hidden to be expanded to take up additional width. On the spanned page, it renders the first column on that page correctly, then there is a white space gap equal to the width of the hidden columns and then the rest of the cells show with the last column expanded to take up the same width that the original 2 columns were going to take up, plus its width.
We have tried several different settings to see if it helps this issue or makes it worse. So far cangrow/canshrink/keep together have made no impact. It is not possible to increase the page size due to limited page size selection availablility for the client. There are far too many combinations of what the user can elect to show or hide to put together different tables to show and hide on the same report to remove this effect.
Any help or suggestion on this issue would be appreciated
Hi;
Can anyone please tell me how to do re-mapping? or give some resources address that I can learn easily?
Thanks.
hi! i have two different databases (SQL 2005 and Oracle) and i need to map their tables with one another. how will i do this?
thanks
I'm using NHibernate with SQL Server Express Edition and I've been problems with the data type to be defined in the "type" attribute on the "property" tag in the XML file mapping.Has someone worked with that?I need to match the appropriate NHibernate type to the following SQL Server Types: uniqueidentifier;bit;ntext;I have been getting "type mismatch" error when the code is trying access the data. Thanks a lot!
View 2 Replies View RelatedHi all, I have to provide user mapping between two databases on the same server so that the tables and content of both the databases can be accessed by each other. I know how to do it using Enterprise Manager, but I have to do it via script as in my asp.net application the databases are created dynamically. If I am not wrong, then "sa" login will be required to execute this script, but no problems as we will be having the "sa" password also. The server is sql server 2005.
Can anybody please let me know how to do it exactly. Its very urgent. Thanx a lot in advance.
hi friends..
i want to insert data in sql server2005 table through asp.net
column names of this table comes from diffrent tables.....
like Rollno--- in my new table....but in old table1 this is like RNO & from old table2 this is R_no
so i want insert this two old diffrent table data into my new table...but i have problem coz of diffrent column names of old table...
can you help me 4 that...
Hello,
I have a requirement to link two databases on the same server. Besides using the microsoft link option is there any other method by which we can link these two databases. Responses will be highly appreciated.
Thanks
I'm trying to find out the best O/R mapping tool for .NET. A perfect tool would begin with the database model and would be capable of generating 2 layers: the Domain layer (normal classes) and the Persistence layer (methods for storing and retrieving the domain layer objects from the database.
This tool would also be capable of generating the corresponding Visual Studio solution and projects.
I've already tried NetTiers, but it generates so many layers that the code is very dificult to manage and understand.
So any of you know a tool similar to the described above?
We have a Item table and a Price table. Structure is mentioned below. An Item need to be matched with the Price table (or vice versa is also fine) and get the Cost from the Price table. The challenge (which I feel :) ) is, mapping or Columns to be looked up between these two tables are not fixed.For an Item, Country, City and Number of Days columns can have a value or can be null. For ex, Paper, US, New York <10 days is one combination which should be matched to the Item table. For Paper, UK, NULL, <5 days is another combination which need to be checked. it is kind of dynamic look up of columns between the two tables.
Price Table
Item Country City Number of Days Cost
Paper US New York <10 100
Paper UK <5 150
Paper Chicago >10 200
Pen China <10 250
Item Table
Item Country City Number of Days
Paper US New York 5
Paper UK London 3
Paper US Chicago 15
Pen China Shangai 5
Paper China Beijing 15
Paper US Chicago 5
I need to get a list of users and databases that a sql login is mapped to. Is there a view or a sp that can get me this information?
View 18 Replies View RelatedIn an event of a system restore from development to production, what would cause the mappings for a database user to be whiped out?
Thank you in advanced for the clarifications.
Al
Hi Guys
I have a table with a column and value like below.
A1JAN
A1FEB
A1MAR
A1APR
A1MAY
A1JUN
A1JLY
A1AUG
A1SEP
A1OCT
A1NOV
A1DEC
A2JAN
A2FEB
A2MAR
A2APR
A2MAY
A2JUN
A2JLY
I want to map all these values to one value like AL AVG
How do i implement the solution so that all those different values map directly to one value.
Thanks.
I need to generate a document with the fields mapping from a DataFlow Task. Anybody knows how to do this?
Know I'm using screenshots from the destination object mapping.
Thanks
I read in my record. As we proceed down the pipeline, I want to put kind of record (with length 742) into one path, and a different kind of record (with length 242) into a different path. My problem is that I have (obviously) different fixed width column mappings for the two kinds of records. How can I change the column mapping mid-stream? Can I? Do I need to just write out to flat files and go from there?
Thanks!
Jim Work
Hello, I am developping a web application who is connected to SQLServer 2005 via the connection sring as below
<add name="LocalSqlServer" connectionString="Data Source=IBM7;Initial Catalog=Reclamation;Integrated Security=True "
providerName="System.Data.SqlClient" />
I want to know which user (bydefault ) who is connecting to the DB . and how is mapped this user with user in SQL server?
Thanks in advance
I am trying to attach a db to SQL Server 2005 and assign a User to the DB that can read and write. I am using one user (CreateDBs) to attach the DB and a second user (TestUser) to do the reading and writing. I run the following code and the DB is attached but I get the following error when I run the code below.
********************ERROR********************
System.Data.SqlClient.SqlException: Cannot open database "hello2" requested by the login. The login failed.
Login failed for user 'CreateDBs'.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at NewSite.submit_Click(Object sender, EventArgs e) in X:InetpubRMA4NewSite.aspx.vb:line 120
********************CODE********************
'Need to attach to SQL Server
Dim objConn As New SqlConnection("Server=Web-testbedSQLExpress;uid=CreateDBs;pwd=ABC123;database=master")
objConn.Open()Dim objCmd As New SqlCommand("EXEC sp_attach_db @dbname = N'" & sitename & "', @filename1 = N'X:sites" & sitename & "Database" & sitename & ".mdf', @filename2 = N'X:sites" & sitename & "Database" & sitename & "_log.ldf'", objConn)
objCmd.CommandType = CommandType.Text
objCmd.ExecuteNonQuery()
objConn.Close()objConn = New SqlConnection("Server=Web-testbedSQLExpress;uid=CreateDBs;pwd=ABC123;database=" & sitename)
objConn.Open()objCmd = New SqlCommand("EXEC sp_addrolemember db_datareader, TestUser", objConn)
objCmd.CommandType = CommandType.Text
objCmd.ExecuteNonQuery()
objConn.Close()objConn = New SqlConnection("Server=Web-testbedSQLExpress;uid=CreateDBs;pwd=ABC123;database=" & sitename)
objConn.Open()objCmd = New SqlCommand("EXEC sp_addrolemember db_datawriter, TestUser", objConn)
objCmd.CommandType = CommandType.Text
objCmd.ExecuteNonQuery()
objConn.Close()
It still doesn't work if I use sa as the user. I know I am missing a step, what is it?
Hi all,
I'm not sure how easy of a task this is, or how to go about it, so I thought I'd ask here. I am doing a major overhaul to my site and am re-programming the backend which involves re-formatting my tables, table names etc.
What I want to do is set up a new table in the format I want for the new site, but still be able to have the live data that is being submitted to the site now, be entered into the new table so that I don't have to shut down the site for days to transfer and reformat data. Example
CURRENT SITE
Table 1
Field1: Name
Field2: Address
NEW SITE
Table 1
Field1: Name
Field2: myAddress
Field3: City
I want to be able to somehow map the two together so that when data is entered into the Name field on the current site, that same name is also inserted into the new site table as well. Mapping like this:
(current site)Name -> (new site)Name
(current site)Address -> (new site)myAddress
The city field would be left unaffected as that data would only be entered once the new site is up and running.
I know I could do this from a stored procedure on the exiting site or by re-writting all of my SQL to insert into both tables, but right now all of the SQL is hardcoded into the pages and I have A LOT of pages. Is there a way to map the tables together from within SQL Server?
Cheers,
Jeff
Has anyone used DTS packages for migrating old data to a new schema?
If so are there any tutorials on this?
I'd prefer not to do this by hand. ;-)