Matrix Control
Nov 16, 2007Hi all,
Can the matrix configure to show total rows and total columns? If yes, how?
Regards,
Farouk Yew
Hi all,
Can the matrix configure to show total rows and total columns? If yes, how?
Regards,
Farouk Yew
Hi All,
I am placing a Matrix inside the table control for grouping requirements,but when we export the report to the Excel, the contents inside the table cell are ignored. Is there any way to get the full report exported, as per the Requirement.Please help me with this issue.
With Thanks
M.Mahendra
Hi all,
I'm using matrix control as my reporting tools.
But i found one trouble, how can i do my matrix become like this.
Product A
Product B
Customer
Price
Qty
Price
Qty
Customer A
10
10
140
160
Customer B
12
120
120
160
Customer C
10
10
110
140
The price and qty is the static column, and i would like to make the static row also. (show in red color) but i can't.
Please help...
Thanks
Kendy
Just wondering when is it preferred to use Matrix control as opposed to a table? Also, on a related note, can a table control be used for displaying information from one data set or could information coming from multiple data sets be bound to a single table in such a way that there could be logically different sections within the same table?
Thanks.
Hi there.
I am creating a report that the requirements need different background colors based on the row or column as shown below:
Community
Total # of Respondents
Resident's Overall Satisfaction Rating
Quality of Repair
May '07
41
3.6
5.0
April '07
14
1.8
3.0
Q2 '07
55
2.7
4.0
March '07
36
3.6
3.0
February '07
28
4.0
1.2
January '07
22
2.2
4.0
Q1 '07
86
3.3
2.7
YTD '07
141
3.0
3.2
December '06
33
3.8
4.2
November '06
27
2.6
5.0
October '06
42
1.8
3.0
Q4 '06
102
2.7
4.1
September '06
58
4.0
2.2
August '06
84
2.0
1.6
July '06
52
3.2
3.4
Q3 '06
194
3.1
2.4
June '06
40
2.4
4.2
May '06
41
3.6
5.0
April '06
14
1.8
3.0
Q2 '06
95
2.6
4.1
March '06
67
N/A
3.8
February '06
38
N/A
2.8
January '06
N/A
3.8
N/A
Q1 '06
105
3.8
3.3
YTD '06
496
2.9
3.5
Rolling 12 Month Average
477
2.9
3.3'
I can get the row colors to work great with an expression, but when I try to add the gray column with conditional formatting for the Resident's Overall Satisfaction Rating question, it clobbers my row formatting. I am thinking that I will have to do some gnarly expression in each of the rows and columns using the InScope function. Does that sound about right, or is there an easier way?
Thanks, Mike
All,
I am able to display the data in matrix, however I need to place it next to a table report item, so that the rows in table and matrix together would represent the data for same entity. In order to accomplish that, the Matrix rows need to be properly aligned with Table rows. But thats not happening. For some reason, in the Layout view they align properly, but when I Preview the report, the rows are not aligned. I have checked the cell sizes of both in the properties, they are both identical. So, I am very surprised why the Matrix row size is growing less than Table row size when the report is generated. Any ideas how to fix this?
Thanks.
All,
Is it possible to Group data in a Matrix exactly similar to Table Control. For example, my table control would group data as follows:
Region Country City $ales
North America
USA
Chicago 4 MM
LA 10 MM
NYK 6 MM
Canada
Toronto 4 MM
while the matrix would display as:
North America USA Chicago 4MM
LA
NYK
Canada Toronto ...
Do you see the problem? The matrix is starting the subgroup at the same level as the parent group. How do I make a sub group start at the row below the parent group row in matrix just like in the table above?
hi everyone:
the report show two tables two matrixs
how can i control the distance between them
I want to set the same distance between the table and matrix
or (table and table )
Hello All,
In my report, I have a Matrix control placed next to a table. It renders properly and displays data aligned in two controls in Visual Studio Preview. However, when I deploy to production, it wraps the matrix control below the table, in fact puts the entire matrix control underneath the table. Why such strange behavior and not in the Preview of the report but only in Production? Any ideas how to fix this?
In VS Env. Preview --> [Table][Matrix]
In Report Svr Prod --> [Table]
[Matrix]
Thanks,
When I created a Table control, I was able to read things like .Color, FormattedValue, etc. from SSAS. This was great, because I could control all existing and future reports' formatting via one change in the cube.
Now, I've decided that a Matrix control is superior for various reasons. However, I notice that I MUST apply an aggregate function to get a cell value...well, it appears that this means there's no longer any way for me to read my SSAS formatting.
I tried =First(Fields!DataValue.FormattedValue), =Max(...), etc.
I also tried it with the color property, etc. Nothing worked.
Are there any workarounds? I'd hate to embed the formatting into each of my 40 reports, because the user is likely to change his/her mind after the fact.
Thank you,
Bert
Hi all
I have taken Marix control in my report,But i am unable to increse Rows and cols.
How can i make it?
Reagards.
I have deleted the entry
<RenderingExtension>HTMLOWC</RenderingExtension>
from the rsreportserver.config file
but I still can't see HTML OWC in the export drop down.
what else do I need to do?
I need to design a report like as below
Location jan feb mar april total %
abc 1 2 1 1 5 % calculated value
ddd 1 1 1 1 4 % calcualtedvalue
------------------------------------------------------------------------------------------------------
total 2 3 2 2 9 total(%calculated value)
i was able to get everything except last column. i am using Matrix control. can any one help me how to another column after sub total in matrix control.
hii
Everybody
In my report i have a matrix,but i want to show only 10 columns in one page and rest of the data should come in next page?
so is there anyway to control the number of columns in a matrix to be shown in the priview?
please help me with some suggestions.
its orgent
thanks in advance
Mahasweta
I have a matrix report:
My Expression in the data fields inside design mode is:
IIF(Fields!Row_num.Value mod 2 ,"White","LightGrey")
I am using a Dense rank Function at the dataset level in order to group id column wise. So Fields!Row_num.Value comes from that set.
Earlier it was BLANK values: Please see below for reference.
Tried IsNull on SQL Server already and does not work because there are no NULLs in the data I am retrieving. The empty cells happen when the matrix creates the crosstab report - where there is no data for a column. Everything else works well except the BLANK values being not colored as you see in the screen shot, im using ISNOTHING function to achieve those 0's if NULLS inside the report. But though we have a value inside the cell coming from report it does not colour the entire group.
My requirement is coloring the entire column group irrespective of the NULLs' or Blanks.
Have also tries several functions, but of no use. I am missing with a tiny thing I guess which I am unable to figure out.
Other Functions Tried:
=IIF(VAL(ReportItems!ROWCOLOR.Value) MOD 2,"WHITE","LightGrey")
=iif(RunningValue(Fields!City.Value,CountDistinct,Nothing) Mod 2, "LIGHTBLUE", "SILVER")
=iif(RunningValue(Fields!DQLogDateTime.Value,CountDistinct, Nothing) MOD 2, "LightGrey","White")
does any one have and example of how to embedd a flash swf file onto a report.??? Is it possable? any examples would be helpful.
View 1 Replies View RelatedI got the following code to add a column in a matrix with a variance:
IIF(IsNothing(Previous(Sum(Fields!Amount.Value))) or Fields!year.Value=First(Fields!year.Value,"Category") or Previous(Sum(Fields!Amount.Value))=0,nothing,
(
(Fields!Amount.Value)
/Previous(sum(Fields!Amount.Value))
)
)
This code works fine, except that the first row of the matrix shows an #error
This happens with each matrix where I use this expression. A warning emerges:
rsruntimeerrorinexpression the value expression for the textrun Textbox43.Paragraphs[0].TextRuns[0]' contains an error.
Attempted to divide by zero.
The strange thing is that the part
Fields!year.Value=First(Fields!year.Value,"Category")
should prevent an error and I expect it to show 'nothing'
An screenshot of the table. (each color is a different category. Each row stands for 2013, 2014, 2015)
As you can see, all other 2013 rows show a blank cell, except the first row.
I have a Matrix table that expands to the right when choosing an amount of months to be shown. Under this matrix I have to Charts. The two charts are situated together, that is no space between them, and to the left of the report.
Now, if I choose a lot of months, say three years the matrix diagram will be huge to the right. The problem I have is that the second diagram, the one on the right, moves to the right depending on how big the report gets, and this is not good at all. The two charts are supposed to be all the way to the left.
How? Why does the right chart move?
Thanks in advanced
Kind Regards
Hello.
I hope to explain myself well - I want to make a matrix with two rows.
Lats say my data is this:
I hava a list of months and in every month I have a number of pepole and there age.
How can I show this in a matrix?
It need to be in a matrix since I need the columns to expand acording to the month but I don't know how to create two diffrent rows in my matrix.
The data should look like this:
10/06 11/06 12/06 01/07 02/07 03/7 04/07 .....
num 5 1 2 5 4 5 7 .....
age 16.1 25 18.5 14.8 25.5 20.5 18.5 .....
Thanks for any help.
I have a report thats fully functional. I just want to add a filter so that my "Visits" field only displays the Visits per day that are less then 6. When i try to filter out the matrix or the group, it tells me the datatypes are different . Something about int32. Its in a matrix, but i have seen this happen in a table too, so i guessing thats not the problem. I just want to be able to display the information for Sales Reps with less then 6 Visits. Any help, will be greatlly appreciated.
View 1 Replies View RelatedUPDATE #2: When it said "Do you want to install Microsoft SQL Server" I said "yes" and that caused it to work. I exited and re-ran and now the print runs w/o the "install SQL Server" (If the prompt had said "Do you want to install the print dialog" we wouldn't be having this discussion...)
UPDATE: After posting this i discovered that the same thing occurs when attempting to print the report direct from IE6: First a dialog pops up "Do you want to install this software?" Name: Microsoft SQL Server. When I click "Don't Install" I get the dialog "unable to load client print control." Since this happens direct from IE6 I suspect it's browser settings. I'll resume tomorrow and post a followup.
My WinForm C# app integrates Reporting Services by calling them from WebBrowser controls. The problem is attempts to print cause a dialog: "unable to load client print control."
I've read prior posts that say "enable Active-X in your browser" - I don't know how to do that from a WebBrowser control.
Any ideas how to support Reporting Services "Print" from within a WebBrowser control?
RELATED THREADS
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=332145&SiteID=1
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=264478&SiteID=1
Can we do this?
Adding more columns in a matrix report that don€™t
belong to the columns drilldown dimensions€¦
That is, for example, having the following report:
Product Family
Product
Country City Number of units sold
Then I
would add some ratios, that is, Units Sold/Months (sold per month) and other that
is the average for Product Family (Units Sold/Number of Product Family), for putting an example€¦ some
columns should be precalculated prior to the report so do not get into it, the
real problem I don€™t see how to solve is adding one or two columns for showing
these calculated column that doesn€™t depend on the column groups but they do
for the rows groups€¦
Any guidance
on that?
The only
way I am seeing by now is to set it as two different reports, and that is not
what my client wants€¦
Many
thanks,
Jose
Hello,
I have a matrix in my report that is based on an MDX query. I copy-paste the matrix and then see the two matrices in the report and all is fine.
I then insert a group into the second matrix. When I run the report the second matrix appears as I would expect, but the cells are blank in the first matrix. Sometime all the data cells are blank, but not the totals.
I tried a similair thing with a table. I added a table based on the same MDX dataset and the cells in the matrix were also then blanked out.
I made sure that the matrices were not sitting on top of each or even in the same space.
The goal here is to show the same dataset but with different groupings. I thought of doing drilldowns, drillthroughs, etc. but this is the way they want to see the data.
Any ideas what I am doing wrong?
Thank you for the help.
-Gumbatman
Hi,
I want to be able to alter the filename that my DTS package imports programmactically with a T-SQL stored procedure.
Is this possible, I really dont want to write a VB/COM package just to do this!
Jason
Ok, I am having a little trouble figuring out if this is possible...
At first it looked easy (It always does), but as I started messing with matrix groups, it seems that i cant be done in 1 matrix.
Here is the display I want:
Value 1 Value 2 Total
Period 1 Period 2 Var % Period 1 Period 2 Var % Period 1 Period 2 Var %
Row
Row
Row
Row
I was thinking of having 2 groups, and then add a column to the 2nd group to calculate the variance column, and have that total. I cannot seem to get it to do that.
This is the first time I have really pushed the matrix for more than the basics.
Any ideas?
Thanks!!
Question # 1:
I have two matrices - Matrix A and Matrix B.
Is it possible to Add a cell in Matrix A to a Cell in Matrix B and output that value in Matrix C?
Question # 2:
Since I think the answer to #1 is NO, I'll ask this question.
I have a dataset which has duplicates which I can't seem to get rid of - I've tried the distinct keyword and it's a no go.
Is there a way to SUM NON-DUPLICATE values in a matrix. I've seen the COUNTDISTINCT function, but I don't think that's going to help me.
hello
I have a count (bookings.id) as nobookings in my query, which returns a count of all specific classes for a member. In the matrix i have sum(fields!nobookings.value) which adds the bookings by class type (1 tennis, 2 golf, 3 cricket). Now i need the total of all classes by pmember (6 in this case). Can srs do this?
My development environment includes Visual Web Developer, SQL Server 2005 Express and SQL Server Management Studio Express. I have a .sql control string that creates a database. The control string is in my App_Data folder within my web site. When I use SQL Server Managment Studio Express to run the .sql control string and create the tables etc. it does it in my SQLEXPRESS folder and not in the web.
How do I run the .sql file so it will create the database in my App_Data folder within the web site?
Thanks,
Kyleq
I wanna know how to retrieve & insert an image from/to a Sql Server database.
using image control or any other control
I’ve done that with windows form picture box.
As that was explained in MS tutorials
Code….
-------------------------------------------Dim ms As New MemoryStreamPictureBox1.Image.Save(ms, PictureBox1.Image.RawFormat)Dim arrImage() As Byte = ms.GetBuffer
ms.Close() Dim strSQL As String = _ "INSERT INTO Emp (EmpName,EmpSalary,Picture)" & _ "VALUES (@EmpName,@EmpSalary,@Picture)" Dim cmd As New SqlCommand(strSQL, ConnEmp) With cmd .Parameters.Add(New SqlParameter("@Picture", _ SqlDbType.Image)).Value = arrImage .Parameters.Add(New SqlParameter("@EmpName", _ SqlDbType.NVarChar)).Value = txtEmpName.Text .Parameters.Add(New SqlParameter("@EmpSalary", _ SqlDbType.Decimal)).Value = txtEmpSalary.Text End With
cmd.ExecuteNonQuery()
-------------------------------------------
But with a web form’s image control I DO NOT know how to do it
I real appreciate your help
Thank you
please explain selectparameters and conflict detection property within sqldatasource control
mohsen
Hi,i have a question, i have a VS2005 and a SQL server 2000 enterprise in my office that i used for web developement,iam new to this, i made a data driven site using some automated controls available in the toolbox, but i need to made some manual process, like i need to make a LABEL show the SUM of specific number fields from my data base, they say i have to make a OLEDB connection using VB, but i don't know how,can you tell me how?Thanks
View 13 Replies View Relatedhi friends,
I created sqldatasource control. In select command i written the query like this "select * form emp" and bounded in grid.How can I change the query for searching the details according the date wise when i click the search button.
Hello experts
i have a SqlDataSource Control on my web form. Here is the source for the control
<asp:SqlDataSource ID="sqlSearchDataSource" runat="server" ConnectionString="<%$ ConnectionStrings:DbefomsConnectionString %>"
SelectCommand="SELECT [icon], [file_name], [path] FROM [tblfile] WHERE ([file_name] = @file_name)">
<SelectParameters>
<asp:ControlParameter ControlID="txtSearch" DefaultValue="0" Name="file_name" PropertyName="Text"
Type="String" />
</SelectParameters>
</asp:SqlDataSource>
This control displays icon, file_name, path in GridView Control
The problem is How can i store the above field values in an asp.net variable.
Thanks
Regards
Ali