i was able to get everything except last column. i am using Matrix control. can any one help me how to another column after sub total in matrix control.
My Expression in the data fields inside design mode is:
IIF(Fields!Row_num.Value mod 2 ,"White","LightGrey")
I am using a Dense rank Function at the dataset level in order to group id column wise. So Fields!Row_num.Value comes from that set.
Earlier it was BLANK values: Please see below for reference.
Tried IsNull on SQL Server already and does not work because there are no NULLs in the data I am retrieving. The empty cells happen when the matrix creates the crosstab report - where there is no data for a column. Everything else works well except the BLANK values being not colored as you see in the screen shot, im using ISNOTHING function to achieve those 0's if NULLS inside the report. But though we have a value inside the cell coming from report it does not colour the entire group.
My requirement is coloring the entire column group irrespective of the NULLs' or Blanks.
Have also tries several functions, but of no use. I am missing with a tiny thing I guess which I am unable to figure out.
Other Functions Tried:
=IIF(VAL(ReportItems!ROWCOLOR.Value) MOD 2,"WHITE","LightGrey") =iif(RunningValue(Fields!City.Value,CountDistinct,Nothing) Mod 2, "LIGHTBLUE", "SILVER") =iif(RunningValue(Fields!DQLogDateTime.Value,CountDistinct, Nothing) MOD 2, "LightGrey","White")
I got the following code to add a column in a matrix with a variance:
IIF(IsNothing(Previous(Sum(Fields!Amount.Value))) or Fields!year.Value=First(Fields!year.Value,"Category") or Previous(Sum(Fields!Amount.Value))=0,nothing, ( (Fields!Amount.Value) /Previous(sum(Fields!Amount.Value)) ) )
This code works fine, except that the first row of the matrix shows an #error
This happens with each matrix where I use this expression. A warning emerges:
rsruntimeerrorinexpression the value expression for the textrun Textbox43.Paragraphs[0].TextRuns[0]' contains an error.
Attempted to divide by zero.
The strange thing is that the part
Fields!year.Value=First(Fields!year.Value,"Category") should prevent an error and I expect it to show 'nothing'
An screenshot of the table. (each color is a different category. Each row stands for 2013, 2014, 2015)
As you can see, all other 2013 rows show a blank cell, except the first row.
UPDATE #2: When it said "Do you want to install Microsoft SQL Server" I said "yes" and that caused it to work. I exited and re-ran and now the print runs w/o the "install SQL Server" (If the prompt had said "Do you want to install the print dialog" we wouldn't be having this discussion...)
UPDATE: After posting this i discovered that the same thing occurs when attempting to print the report direct from IE6: First a dialog pops up "Do you want to install this software?" Name: Microsoft SQL Server. When I click "Don't Install" I get the dialog "unable to load client print control." Since this happens direct from IE6 I suspect it's browser settings. I'll resume tomorrow and post a followup.
My WinForm C# app integrates Reporting Services by calling them from WebBrowser controls. The problem is attempts to print cause a dialog: "unable to load client print control."
I've read prior posts that say "enable Active-X in your browser" - I don't know how to do that from a WebBrowser control.
Any ideas how to support Reporting Services "Print" from within a WebBrowser control?
Hi All, I am placing a Matrix inside the table control for grouping requirements,but when we export the report to the Excel, the contents inside the table cell are ignored. Is there any way to get the full report exported, as per the Requirement.Please help me with this issue.
I'm looking for help on how to do something like this in Reporting Services. I'm using a Matrix, but always messes up and doesn't put the values where I want them to be.
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified. Restored my Reportserver and ReportserverTempDB databases Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script) at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'? Is it possible to migrate from 32bit to 64bit?
I am trying to use a reportviewer control (processing mode = remote) to view a rdl that is hosted on a server running MOSS, the reporting services are run in "sharepoint integrated mode". When i try to set the path to the RDL on the control like i usually do for an ASP.NET ReportViewer control, i get the error message posted below. I cant find anything on google, Please HELP
I am having difficulties with what seems to be a common issue. I want to produce a trial balance. The first row of the tablix would include fields: AccountNo, Description and startingbalance from a dataset called tb. Below that, I would like to draw from a dataset called Entries with multiple rows having fields: AccountNo, Desc1, Desc2, Debit, Credit and Balance. Balance in the Entries table is already computed from the starting balance and the entries above. There are many AccountNo's with corresponding entries.
I am having trouble with calculating AVG in a matrix. I have done the subtotal but I would like to know how to calculate the Average. I would also like AVA below the Total.
Link : [URL] ....
I have also added an image oh how the matrix looks like.
Hi all, I am having problem with table control I added one table control to my report designer. How can i get horizontal and vertical lines to my table. Regards.
I am trying to print only the grand total raw. The grand total is based on the information in the groups and therefore I cannot hide the groups.
Instead I am trying to minimize the size of the group raw by sizing font, shrink, etc but with no success. I still get a lot of unwanted space. How can resolve this?
I have a report (stored procedure) that I have set up in SQL 2005 Reporting Services. I've designed this report (using SQL server business intelligence studio), and several other reports, thinking that running totals or summing may be the issue, but it hasn't been. The latest iteration has been just a display of product info, about 100 records, no fields formatted or summed. Very very simple, straight-forward report. If I go to the Report server & upload the rdl file, it displays fine, performs as it should, paging & exporting - everything works fine. The issue comes up when in a web app, I put a Reportviewer control on the page, and call the report.
It works, sort of.
Originally, I had written the page using ASP.NET AJAX Enabled web project, and I had been using the Tab Container on the page. What happens is when I open it on that tab (I am using AJAX Tab panels, which had been working fine without this behavior prior to finally getting the reportviewer working), and the report displays, the "e" on Internet explorer at the top of the tab now flickers, like the page is reloading. It also runs the CPU up to 100% on the computer and although I can go from tab to tab in it (I am using AJAX tab panels in the page), it will take like up to a minute to go to the next tab. I'm not doing anything really data-intensive on those tabs, and they had been functioning fine prior to putting in the report viewer (i.e. they weren't flickering & clocking the CPU).
Thinking that the Tab Container may be the issue, I created just a plain AJAX Enabled web project and put the same reportviewer on it. Same performance. It'll display the report, and then take the system up to 100% and stay there until I kill the browser.
After that, I did just a plain old ASP.Net web project and put the report viewer control on it. Same result. The report will display, but as soon as it does, the "e" on Internet Explorer tab starts flickering and you see the CPU go to 100% and stay there. I've left it for 20-30 minutes with no change. It appears as if the page is constantly refreshing.
Thinking that the issue may be related to having the reportviewer report hard coded in the app, I put a button on the page, and assigned the button to put in the report. It displays, but it again runs the CPU up to 100% and stays there.
I thought that having Asynch = True (run the report asynchronously) might be the issue, but setting it to false made no difference.
I eventually have to kill the page to do anything, because it has the system up to 100%.
The code I am using on this page follows:
Here's the code in the codefile:
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load If Not Page.IsPostBack Then Me.ReportViewer1.Visible = False End If ReportViewer1.ServerReport.ReportPath = ""
End Sub
Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click ReportViewer1.Visible = True ReportViewer1.ServerReport.ReportPath = "/BA10listing"
.... so you can see there's a lot going on here. The report returns ~100 records or so, no calculations, no summation, no grand totals. Basically a "nothing" report, just listing product info data.
In SQL Reporting Services in the web browser, this report displays fine, no problems. It's only when I call it from the Reportviewer inside a web page that it hangs.
Any idea why reportviewer might make this act this way?
My system is running Windows XP, VS 2005, I have both SQL 2000 and SQL 2005 on this same box. I have a server that has both SQL 2000 & SQL 2005 on it as well, and the behavior is the same for both, whether I run the web page with the Reportviewer control on it with the report being on the local system, or the remote system.
Any help or advice would be very much appreciated.
Is it possible to repeat the row labels for matrix reports where there are multiple groups. So if the matrix report rows are department,division,employee then have all three labels show up on each row not just at the breaks. Cannot seem to find a way to do this. thanks
Could you please anyone tell me how to have static and dynamic columns in a matrix?
We can add static columns by right clicking detail text box and add column. But it will repeat for each column group. I need static columns in the dynamic columns level itself.
Seems simple. People working in departments with different types of hours (regular, overtime, vacation... thus the grid which pivots hours in rows to the appropriate columns). I want to subtotal by department, but whenever I try to add totals after to that group, I just get a grand total. No subtotals. Why?
I am trying to export report to .CSV , but I am unable to export grouped data, instead to grouped data , it exporting detail data,for example my grouped data in matrix is as below , I need to export below data to .csv
I have a matrix report and as per the requirement, I must format the row colors. First row must be no color and second row must be light blue. This color formatting would repeat for remaining rows in the matrix. I tried to select the entire row in the matrix, selected "Background Color" option and in "Expression" window, I entered "=IIf(RowNumber(nothing) MOD 2, "White","LightBlue")".This resulted in the color formatting of columns in the matrix report.
I am creating a Matrix report using SSRS/Visual Studio 2008 as below:
Jan Feb March April May June July Aug Sept Oct
A & B are customers. The values represent sales for each month.I have got most parts in place except the Month are displayed in random order (1,10,2,3,4,5,6 and so on).I have tried the option to create a calculated column with month numbers and change group properties but that did not work.how to get it to sort display as 1,2,3,4,5,6,7,8,9,10.
I am new to matrixes and I have created a dataset which I would like to populate into an expanding / collapsing matrix.
The purpose of the report is to show a list of pallets and their respective stock adjustments. I have laid the matrix out as follows...
I have spent the entire afternoon playing around with this and searching Google, but as yet, I have been unable to get the matrix to display more than 1 record per pallet. Each of the pallets below have multiple adjustment records, yet the report will only display the first one...
If I assign the dataset to a table, it displays as expected.
My stored procedure give me top 3 activities. My SSRS report design, I am able to display first activity when I select the Activity field from the Stored procedure, how to display 3 activities for each category.. Also I need a solution to sort the categories based on the requirement below.
I am creating a matrix in which row color changes alternately(1st row white second row blue and so on .) now i am calling this matrix as a sub report in other report and i had applied grouping on that row in which this MATRIX is called the problem i am facing is in first sub report 1st row is coming in white color while in second sub report 1st row is coming as blue color background And so on...
Why so is happening as i want 1st row as white and second row as blue i all sub reports .
I have been tasked with creating a report using Reporting Services from an excel report that was wasting a lot of manual effort and time. I have searched boards and I am having the hardest time trying to find a way to do the following in Reporting Services within a Matrix:
I can not find out how to do a percent change (the column in red) subtracting just the final or most right two columns of the resulting matrix columns, not an average or some other function over the entire row....
Please help, I know others have had the same issue...
I have one Matrix Report developed in BIDS(2008R2). If I export this report into Excel sheet exact structure what i developed in BIDS its coming. But If I exported into CSV I am loosing Structure and Columns showing as Rows.
Hi all I want to show two values in one cell.is it possible. I need to display number and percentage in one cell Like ---- Number and percentage in Brakets. 10 (20%) How can i do it? Pls help me
I defined my input parameter as date/time but it doesn't have a time picker where we can accept user input.
The calendar is great but time picker is missing.
Is there any add-in or tweaks I can use to get that feature ?
The alternative solution which uses drop down with some preset values are not feasible for me. All I need is just the time picker similar to adjust time in Windows.
I developed one dynamic column (matrix) report. while export to excel it 's show same output as SSRS have. but while exporting CSV pivot column not coming as same as Excel and SSRS screen. data is moving to rows.
