Matrix Header Labels (continuation)
Oct 10, 2007
I addressed this situation in another thread, but since the thread had not been updated for some time I felt a new thread may have been warranted to included uptodate information and requests for further updates.
I will refresh the topic's primary issue:
When using a matrix, a developer wanted to provide column headers atop the columns to help users distinquish between multiple columns of the same relative data type(columns of digits, etc.)
The space in the upper left corner of the matrix will create a void that cannot be broken down or divided so that a column header label can be applied. It's either one label for the whole void or nothing at all.
VOID
Upper Group Column
Sub Group Column
Row Column 1
Row Column 2
Row Column 3
Row Column 4
Data
A poster suggested placing a rectangle inside the voided area above.
Rectangle
Upper Group Column
Sub Group Column
Row Column 1
Row Column 2
Row Column 3
Row Column 4
Data
Then placing a series of textboxes within the rectangle area aligned to the width of the row columns
Rectangle
Upper Group Column
rectangle txtbox
rectangle txtbox
rectangle txtbox
rectangle txtbox
Sub Group Column
Row Column 1
Row Column 2
Row Column 3
Row Column 4
Data
The problem is that when the report is run and rendered the rectangle txboxes are no longer aligned at the bottom. Even though the text within the textboxes is set to the bottom.
Instead the rendered version appears like this.
rectangle txtbox
rectangle txtbox
rectangle txtbox
rectangle txtbox
Upper Group Column
Sub Group Column
Row Column 1
Row Column 2
Row Column 3
Row Column 4
Data
Thus rather than having the labels inside the rectangle textboxes aligned at the bottom so that they appear more in-line with their assigned columns, they are automatically top-justified and this makes the labels look awkward.
So does anyone have any suggestions on how I can get the rectangle textboxes to be aligned adjacent to the tops of the row columns so that their labels appear in-line with their appropriate columns?
Thanks in advance.
View 1 Replies
ADVERTISEMENT
Jan 30, 2007
Is it possible to repeat the row labels for matrix reports where there are multiple groups. So if the matrix report rows are department,division,employee then have all three labels show up on each row not just at the breaks. Cannot seem to find a way to do this. thanks
View 1 Replies
View Related
Jan 25, 2007
Hi,
is there a way to add column header in a Matrix?
Thanks,
Igor
View 6 Replies
View Related
Jan 16, 2007
I want to delete my matrix's header, set header not displays .
I set the header 's content with none and can't set the height with 0cm.
I don't know what to do, I give up at this point and need help from someone here .
View 2 Replies
View Related
Dec 13, 2007
I have the following matrix working:
Measurement M1 Measurement M2 etc....
Unit U1 Unit U2 Unit U1 Unit U2 etc...
Item I1 123 456 120 450
Item I2 111 444 110 440
I'd need to add the manufacturing date of the item to the report. For this I need an extra column next to the row header column (in red) and also a field header (in purple).
Measurement M1 Measurement M2 etc....
Art. Date Unit U1 Unit U2 Unit U1 Unit U2 etc...
Item I1 18Nov2007 123 456 120 450
Item I2 19Nov2007 111 444 110 440
I've tried copying and pasting the first column of the matrix, inserting columns or rows, but I allways end up with an extra grouping level, which I don't want.
The date is the manufacturing date of the item, so it is an attribute of the item, not a separate level of detail.
Anyone knows how to add this extra column to the row header ?
Also, how do I add a column header like "Art." or "Date" in the example above ? I was thinking of placing a text box above the first cell of the matrix, as a kludge.
View 1 Replies
View Related
Jul 4, 2005
Is there any way to add a header to a Matrix row in RS SP2? Much like a header for fields in a table.
View 4 Replies
View Related
Nov 5, 2006
hello,
I'm having a strange problem with a matrix headers.
I can't put column headers above each row group header. There is a
merged cell above them, which can't be split. If I have several row groups,
including Customer ID and Zipcode, I can't put headers above them to
identify them in the matrix. Since both have 5 numerals, they can be
confused.
Does any body know how to solve this?
Thanks in advance,
Roy.
View 5 Replies
View Related
Sep 1, 2006
I have a matrix report, which looks like the following:
Header C Header D
Column A Column B Column C Column D
Column A and B are Row Group columns in the matrix. Column C and D are the details columns. How can I add column header to column A and B. Seems I cannot do it in Reporting Services 2005.
Fan
View 8 Replies
View Related
Apr 25, 2008
The text in my matrix column headers is rendered as tb-rl.
The te
xt is spl
it at rand
om places whi
ch is really ver
y annoying
Is this a known bug?
Is there a workaround?
View 4 Replies
View Related
Jul 2, 2007
Hi,
Is there a way to dynamically make report header and footer fields change location (or size)? I have many matrix reports that grow in width and then the header and footers do not look good.
Another example is I have a line that is in the header...I would like this to grow to the width of the report, which again is not static on a matrix report.
Thanks.
View 2 Replies
View Related
Apr 1, 2008
I've a matrix report with two row groups. One of the row groups has been used to do alternate coloring in report rows. The issue is that the header text that I've provided for the row group repeats twice. Another interesting point to note here would be this doesn't happen in the report preview but only when the report is displayed through a report viewer in an ASP.Net application. I can guess that it must have got something to do with the invisible row group but can't get my head around on how to avoid it?
The report currently looks something like below:
Month 2007 2008
Month Total Ave % Total Ave %
-----------------------------------------------------------------------
January 12 6 1.5......................etc etc.
I want the text "Month" to come only once. Thanks.
View 1 Replies
View Related
Jul 23, 2005
Hi All -I am updating four values. What is the proper syntax to have thefollowing 4 update statements as one statement?set objRec = objDB.Execute("Update orientform set session = '" &strSession & "' where id = '" & strid & "'")set objRec = objDB.Execute("Update orientform set fname = '" & strfname& "' where id = '" & strid & "'")set objRec = objDB.Execute("Update orientform set gender = '" &strgender & "' where id = '" & strid & "'")set objRec = objDB.Execute("Update orientform set lname = '" & strlname& "' where id = '" & strid & "'")Thanks,Joey
View 1 Replies
View Related
Sep 12, 2007
Hi Rafael,
I need to create a new excel file daily and then need to mail it.
The problem iam facing is that ,when i schedule a job the task that dumps data into excel(Dataflow task ) gives a validation error.Everytime i need to manually link the sheets of the excel to the corresponding tables.
Any idea why this is happening?So iam unable to schedule as a job...
Thanks,
Vani.
View 3 Replies
View Related
Mar 13, 2008
I need some help. I am writing a report in SSRS 2005 that I then need to export to Excel. When I put a report header I would expect the header to not display in the Excel spreadsheet until the Print Preview or the Print. The report footer works just fine I put some text in the footer, and it shows up in the footer. The header though, shows up as a row in the Excel spreadsheet that then causes columns to merge. How do I get the report header to act like a page header?
View 1 Replies
View Related
May 13, 2015
I am making a book-like report, I am using a report that has a header and calling a sub-report that has it's own header. However the sub-report header is not showing on the parent report. Parent report header is prevailing over the sub-report. Is it possible to have both headers displaying?
View 3 Replies
View Related
Nov 6, 2007
I have a report that I created and the report was working until I added some fields to a group footer row in a table.
My table has 5 group levels. I had information displaying in the 5th level header group and detail. It was working fine. Then I added some fields to the 4th level group footer. Now it displays only the Page header, Table header, and the 4th level group footer data.
What happened to the rest of the data?
All the cells and rows I want to display have the Visibility Hidden set to false. I tried removing the objects I added (to the 4th level group footer) and it still does not work. Is this a bug or did I set something that is hiding the data.
Thanks,
Fred
View 1 Replies
View Related
Nov 6, 2007
Hi Friends,
There is a one header in the report, when I publish and hit the report in IE(internet explor) the header appears fine on first page when I go to next page this header does not appear.
But in mozilla the header is visible on every page of the report. so it is working fine in mozilla.
I donot why it is happening?
Your help is highly appreciated.
Thanks
Novin
View 1 Replies
View Related
Aug 6, 2015
I got the following code to add a column in a matrix with a variance:
IIF(IsNothing(Previous(Sum(Fields!Amount.Value))) or Fields!year.Value=First(Fields!year.Value,"Category") or Previous(Sum(Fields!Amount.Value))=0,nothing,
(
(Fields!Amount.Value)
/Previous(sum(Fields!Amount.Value))
)
)
This code works fine, except that the first row of the matrix shows an #error
This happens with each matrix where I use this expression. A warning emerges:
rsruntimeerrorinexpression the value expression for the textrun Textbox43.Paragraphs[0].TextRuns[0]' contains an error.
Attempted to divide by zero.
The strange thing is that the part
Fields!year.Value=First(Fields!year.Value,"Category")
should prevent an error and I expect it to show 'nothing'
An screenshot of the table. (each color is a different category. Each row stands for 2013, 2014, 2015)
As you can see, all other 2013 rows show a blank cell, except the first row.
View 3 Replies
View Related
Jan 10, 2008
I have a Matrix table that expands to the right when choosing an amount of months to be shown. Under this matrix I have to Charts. The two charts are situated together, that is no space between them, and to the left of the report.
Now, if I choose a lot of months, say three years the matrix diagram will be huge to the right. The problem I have is that the second diagram, the one on the right, moves to the right depending on how big the report gets, and this is not good at all. The two charts are supposed to be all the way to the left.
How? Why does the right chart move?
Thanks in advanced
Kind Regards
View 1 Replies
View Related
Jun 27, 2006
Dear fellows,
LOP_BEGIN_XACT, LOP_COMMIT_XACT,
LOP_INSERT_ROWS
Labels as the ones are easy recognizable when you explore LDFS by mean DBCC or whatever but on the contrary the following ones are tricky to reach the meaning:
LOP_IDENTITY_TYPE
LOP_DELTA_SYSIND
LOP_SET_BITS
Does anyone have any link related with this? I tried hard to search by Goog or something like that but unsuccessfully at all.
View 3 Replies
View Related
Mar 27, 2007
I have a simple bar graph. All I am looking to do is display the values on each bar. Can someone please help me. Thanks
View 1 Replies
View Related
Apr 22, 2008
I have a page that is part of a 5 page wizard. The wizard gathers data for a claim filter. The second page is laid out with four labels at the top
Filter Name: <filterName> -- filterName_LFilter Description: <filterDescription> -- filterDescription_LFilter Data Source: <filterDataSource> -- filterDataSource_LFilter Purpose: <filterPurpose> -- filterPurpose_L
--I have written an sp to populate these four label.Text values. I want to populate them on page load.
Two questions. How do I get four output values out of the sp? Is there a better way to do this than an sp?
SET QUOTED_IDENTIFIER ON GOSET ANSI_NULLS ON GO
-- =============================================-- Author: <Author,,Name>-- ALTER date: <ALTER Date,,>-- Description: <Description,,>-- =============================================ALTER PROCEDURE [dbo].[a_spNewFilter_Step1_Summary] -- Add the parameters for the stored procedure here @filterID int ,
@filtername varchar(100) OUTPUT, @filterdescription varchar(250) OUTPUT, @filterOwnerID int OUTPUT, @filterDataSourceID INT OUTPUT, @filterPurposeID int OUTPUT
ASBEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements.SET NOCOUNT ON;
--DECLARE @FilterID int
--SET @filterID = 14
SELECT filterIsComplete, filterCreateDate, filterStep1Complete, filterName, filterDescription, das.AuditorFirstName + ' ' + das.AuditorLastName as FilterOwner, dfds.filterDataSource, dfp.filterPurposeFROM a_factSamplingFilter_2 fsfINNER JOIN dbo.a_dimFilterDataSource dfdsON dfds.filterDataSourceID = fsf.filterDataSourceIDINNER JOIN dbo.a_dimAuditStaff dasON das.AuditorID = fsf.filterOwnerIDINNER JOIN dbo.a_dimfilterPurpose dfpON dfp.filterPurposeID = fsf.filterPurposeIDWHERE filterID = @filterIDGROUP BY filterIsComplete, filterCreateDate, filterStep1Complete, filterName, filterDescription, das.AuditorFirstName, das.AuditorLastName, dfds.filterDataSource, dfp.filterPurpose
END
GOSET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GO
----
protected void Page_Load(object sender, EventArgs e) {
int filterID = int.Parse(Request.QueryString["filterID"]); /// grab the filterID from the URL query string
string connectionString = WebConfigurationManager.ConnectionStrings["DDT"].ConnectionString; SqlConnection con = new SqlConnection(connectionString);
SqlCommand cmd = new SqlCommand("a_spNewFilter_Step1_Summary", con); // get the values from filter setup step1 cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.Add(new SqlParameter("@FilterID", SqlDbType.Int)); // using the filterID created in step1 cmd.Parameters["@FilterID"].Value = filterID;
cmd.Parameters.Add(new SqlParameter("@FilterName", SqlDbType.VarChar, 100)); cmd.Parameters["@FilterName"].Direction = FilterName_TB.Text;
cmd.Parameters.Add(new SqlParameter("@FilterDescription", SqlDbType.VarChar, 255)); cmd.Parameters["@FilterDescription"].Direction = ParameterDirection.Output;
cmd.Parameters.Add(new SqlParameter("@FilterOwner", SqlDbType.VarChar,50)); cmd.Parameters["@FilterOwner"].Direction = ParameterDirection.Output;
cmd.Parameters.Add(new SqlParameter("@FilterDataSource", SqlDbType.VarChar,50)); cmd.Parameters["@FilterDataSource"].Direction = ParameterDirection.Output;
cmd.Parameters.Add(new SqlParameter("@FilterPurpose", SqlDbType.VarChar,100)); cmd.Parameters["@FilterPurpose"].Direction = ParameterDirection.Output;
con.Open();
try { cmd.ExecuteNonQuery(); } finally { con.Close(); }
///get name, description, owner, datasource, purpose
}
View 1 Replies
View Related
Dec 14, 2005
Hi!
I have these tables:
DB1
MID
IIN
Title
FullName
Address
Apt
City
Province
PostalCode
DB2
MID
Lang
Version
How can I output a text file formatted like the one below?
(05) 01046 (F 05)
Mr. Sylvain Cote
123 Sesame Street
Apt 6
Charny, BC
L8T 5G6
where
(05)-MID
01046-IIN
(F 05) - Lang
$3.99/yr .COM!
http://www.greatdomains4less.com
View 3 Replies
View Related
Oct 25, 2007
Hi,
We are having trouble getting labels to print correctly when there is a lot of data close together on the labels. These are more than just address labels, so there are many lines, graphics, and borders. Are there additional tools or suggestions for keeping labels consistant?
Thanks
View 1 Replies
View Related
Mar 16, 2007
Ok, I'm an idiot. Does anyone out there have some step by step instructions for creating a report that will do mailing labels. I've got multiple columns on my report but I end up with the contents of each column being the same across each grouping/row. In other words for each record read, since I have three columns, I get three occurances of each customer and address until all the data selected for that row is presented, then I go to the next customer which again is repeated across all three columns.
I'm sorry I'm so stupid, but I've looked at other entries on the forum, and I just can't figure it out. We are trying to get out from underneith Business objects thumb and any help would be greatly appreciated. Thanks! - Eric -
View 4 Replies
View Related
Aug 31, 2007
I have a pie chart and have tried every option I could find on the Data tab for the point labels. They bunch up all over the place. What am I missing?
Does Dundas do this better?
Jerry
View 4 Replies
View Related
Jun 20, 2006
Is there a SQL statement that I can use which allows me to set value lables in a result set? For example, if a table has a gender variable with values of 'M' & 'F', can I write a sql statement which creates a result set that changes these to 'Male' & 'Female' so that everything I do with the result set shows the new labels (but does not change the underlying M/F values in the orginal table?
I do not want to create a new table, but rather display the M/F values as Male/Female when I access the result set in an application (such as Report Services).
Thanks for any advice you can give.
Ed Sloat
View 3 Replies
View Related
Mar 2, 2006
I have a line chart that has several series, and it routinely leaves off 1 or 2 point labels on the last X-axis.
Is anyone else experiencing this? If so, does anyone know what the cause is, and is there a fix?
Thanks!
BobP
View 15 Replies
View Related
Aug 24, 2006
Hi..
Just want to ask if anyone has encountered the same problem..
I have used the Simple Bar Graph to display the list of employees with the most number of emails/chats and sorted it so that the highest number of emails will appear at the bottom of the graph. The problem is that the graph doesnt display a label on the highest number of email/chats. It displays the number of email/chats that the other employee has and its only the employee with the highest number of email/chats that has no number label. It just wont show and I have no idea now on what to do about it.
Does anybody have a solution for this one?
View 4 Replies
View Related
Oct 7, 2015
I have a sql query
create table temp
(
date1 datetime,
category varchar(3),
amount money
[code]....
In above format:15-10 means Oct 15, 15-09 means Sept 15I am getting issues while formatting this in SSRS.I need SSRS table headers to be dynamic. I need that it should be according to the sql table header...The table header should change according to the sql query
View 2 Replies
View Related
Jul 28, 2007
hi there, i have a payment page which uses javascript to calculate payments and what remains etc. That all works fine, the problem i have is that when you are finished and you go to the next page it should save all of the records to the order table where the order_id = a querystring. Now i have tried using an insert method and an update method, not really sure whats the difference when putting data into an existing record. What happens though is that i can save the contents of labels etc but it wont save the content of dropdown lists (of which there are 2) i just cant work it out, i have posted my code below
string strOrderID = Convert.ToString(Request.QueryString["OrderID"]);
string strDiscountPercent = Convert.ToString(5656);double dblDiscountMoney = Convert.ToDouble(txtDiscountMoney.Text);
string strPaymentMethod1 = ddlPaymentMethod1.SelectedValue;double dblPaymentAmount1 = Convert.ToDouble(txtPaymentAmount1.Text);
string strPaymentRecipt1 = txtPaymentRecipt1.Text;string strPaymentMethod2 = ddlPaymentMethod2.SelectedValue;
double dblPaymentAmount2 = Convert.ToDouble(txtPaymentAmount2.Text);string strPaymentRecipt2 = txtPaymentRecipt2.Text;
string sConnectionStringCustInfo = "my connection string";
SqlConnection objConnOID = new SqlConnection(sConnectionStringCustInfo);
//This is the sql statement.using (objConnOID)
{
objConnOID.Open();
string sqlUpDate = "UPDATE tbl_order SET discount_Percent = " + txtDiscountPercent.Text +
", discount_money = " + dblDiscountMoney + ", payment_method1 = " + strPaymentMethod1 + =========== this is the problem line here!
", payment_amount1 = " + dblPaymentAmount1 + ", payment_ref1 = " + strPaymentRecipt1 +
", payment_amount2 = " + dblPaymentAmount2 +", payment_ref2 = " + strPaymentRecipt2 +
"WHERE order_ID = " + strOrderID;
SqlCommand objCmd1 = new SqlCommand(sqlUpDate, objConnOID);
try
{
objCmd1.ExecuteNonQuery();
}
and because it throws an error it wont update the database with any other record. does anyone have any ideas, i have spent hours last night trying to figure this one out and im sure its simple! but i need some help!
Cheers
Jez
View 5 Replies
View Related
Apr 1, 2008
i have an sqldatasource that has a 1 row dataset
how can i read these values to labels?
thanks
View 1 Replies
View Related
Jul 5, 2006
I have a horizontal barchart with integer values, both positive and negative. Major gridlines are shown and I have not specified the interval or the label format. Sometimes the gridline labels (Y axis) show decimal values. Is there anyway to format these? I have tried to format the labels as "#0" but then I see labels occuring twice. I have also played with the intervals, but then sometimes, depending on the values, the zero line is not being shown.
Does anybody have an idea?
Thanks in advance!
Joos
View 4 Replies
View Related