Hi
I've been surprised with upleasant issue in RS Matrix group.
I've tried to filter Matrix group but failed in using "OR" predicat in Filter expression:
ScreenShot
"AND" is used by default despite of header "And/Or" which is disabled!
How can I use "OR" ?
Andriy Zhornyk
I the following report with one group:
Month Number of Sales Total Sales
+ Jan 2007 100 $1,000.00
When you dril down on MonthYear you get the detail data:
Month Number of Sales Total Sales
- Jan 2007 10 $610.00
1 $10.00
1 $20.00
1 $30.00
1 $40.00
1 $50.00
1 $60.00
1 $70.00
1 $80.00
1 $100.00
1 $150.00
My question is. I added a filter to the detail data to give the Bottom % =75 of sales. So My detail data only displays the following rows:
Month Number of Sales Total Sales
- Jan 2007 10 $610.00
1 $10.00
1 $20.00
1 $30.00
1 $40.00
1 $50.00
My problem is the group still displays the total of my dataset (as seen above), but I want it to display the total of the detail data group, like below:
Month Number of Sales Total Sales
- Jan 2007 5 $150.00
1 $10.00
1 $20.00
1 $30.00
1 $40.00
1 $50.00
If I change the fields in the group to look at the detail data ,for instance =count(Fields!NumberofSales.Value,"Details_Group") I get an scope error.
How can I display the totals of the detail data in the parent group after I added a filter to the detail data?
I have a 2 row groups in a matrix and I need to add some space between the top one so that all the columns don't run together. Is there a way to do this?
View 11 Replies View RelatedI have a matrix with six rows and the column is dynamic depending on if any data exists for any row item in a month/year. All rows are summations of data for the particular month. I have a row group that when toggled to visible expands all the rows. Is there a way to restrict the row group to only expand the data in a specific row?
View 1 Replies View RelatedWhat you mean by static group in matrix?
View 2 Replies View RelatedHi All !
I want to show row groups as hierarchy levels and need the
sub total values belongs to each group and sub group levels. But the
most important point is that my top next top group (from child to
parent ) is not static its dynamic.i.e for a diffrent senario my under
displayed example can have Universe--->Earth as parent for Australia and USA.
eg:
1.Australia
|-------sydney
|-------Melbourne
2.USA
|------North US
|------North US(1)
|------North US(2)
|------South US
|------South US(1)
|------South US(2)
Can I get some help from anybody for making a dynamic row groups in the matrix.
Waiting for a kind help.
Regards,
I have a Matrix that counts records by one group. In a simplified scenario, the group values are 1, 2, and 3. When I created the matrix without a subtotal, all 3 groups are returned. I added the subtotal column, and now only 2 of the groups are returned. The dataset query looks like this:
SELECT A
, B
FROM Table
Without Subtotal this is returned:
A CountOfB
1 3
2 6
3 7
With Subtotal this is returned:
A CountOfB Subtotal
1 3 3
2 6 6
The last value is missing. When I remove the subtotal column, the last value does not return. Where did it go? Am I missing a setting?
Thank you so much for reading this. Any help would be appreciated.
babs
Hi, I am creating a matrix and adding multiple row groups. The problem is that I am unable to display headers for each of these groups - can anyone help??
View 6 Replies View Related I just can not understand why when I add text to a group header the report displays more group row space but when I export to excel the extra space disappears....
What the....Help Microsoft please explain...
Thank You...
I have matrix report with 2 row group.
I want to add border to the first Row group.
when I Try add border in the layout tab. the border added to all the cell.
here is my image to show:
http://img2.tapuz.co.il/forums/1_92118232.jpg
is it possible?
thanks!
Hi,
I am using matrix to make a report. I have company name in the row group and user name in the details field. When I run the report I only see the company name once and each user of that company is displayed in a separate row. Then next company name and its users... I wanted to know if there is a way to display company name next to the user name? I know it can be done by using "table" but I can't use table because in this report there are other fields can only be done in a matrix. So, please let me know if there are any settings in matrix which I can use to display my company name next to each user of that company. Please ask me any thing if the question is not clear. Thanks a lot for the help.
-Rohit
Hi,
I am trying to make this report and I am using matrix in it. Currently it merge my outer group value. Is there any ways that I can use Matrix and have my outer group values REPEATED and not merged. Any help will be appreciated.
Thanks,
-Rohit
Hi,
how to change visibility of a column group in a matrix?
Thanks,
Igor
I'm dealing w/ SSRS 2005.
I have my main matrix report which has five row groups.
What I'd like to do is have the subtotal at the 4th level have a coloring for the whole row at run-time....so the user can follow from left to right what the 4th level subtotal actually is (the report can get fairly wide).
At design time, you don't even see the rows to the right of the subtotal, you just see the subtotal box.
Thanks!
I've done this before, but i cant remember how.
All i want to do is sort this group in a specific way.
I want them to be in this order:
AME01
ASE01
ACO01
ALU01
AOS01
APH01
ATR01
ATE01
ACR06
ACR05
ACR02
ACR03
ACR08
ACR07
What is the code i would put in the sorting expression, for this to take place?
I have a matrix report with 4 row groups. I am experiencing a bug with the text that is displayed in the second group.
When it changes group 1, the text for second group is alway wrong for the first row in the list. It always shows the text that was displayed for the first row of the previous group1.
Here is what it looks like. Has anyone else seen this? Please tell me there is a solution and that matrix reports aren't just broken ...
Revenue
Income Type 1
Income A
Income B
Income C
Income Type 2
Income A
Income B
Expenses
Income Type 1
Expense A
Expense B
Expense C
Expense Type 2
Expense A
Expense B
Expense C
Expense Type 3
Expense A
Expense B
Expense C
Hello Guys,
I am working on a matrix report which has several row groups and 1 column group. After execution, the column group wil end up with several columns containg numeric counts. I would like to have the grand total for each "column group" column as a last row on this report.
For row groups you can just right click "Subtotal", but that is not possible for column group. Could someone please help me to find a clever way of accomplishing this, please. Thank you so much for your help!
Hi, I have a matrix report with three data points
1. Inventory
2. Occupancy
3. Absorption
They are grouped in columns by Year and the data is returned by the query at Quarter granularity
My problem is that in the report, I need to display the Inventory data for the last quarter in each year however for Absorption it is the SUM of all 4 quarters
So, for 2006
Want Q4 data for Inventory, sum of all 4 quarters for Absorption
For 2007 Want Q2 data for Inventory (as it's the last loded quarter) and sum of Q1&Q2 for Absorption
How would I (or could I) do this in a Matrix Report - or is there a better way ?
I am new to matrixes and I have created a dataset which I would like to populate into an expanding / collapsing matrix.
The purpose of the report is to show a list of pallets and their respective stock adjustments. I have laid the matrix out as follows...
I have spent the entire afternoon playing around with this and searching Google, but as yet, I have been unable to get the matrix to display more than 1 record per pallet. Each of the pallets below have multiple adjustment records, yet the report will only display the first one...
Â
If I assign the dataset to a table, it displays as expected.
I'll try to make this simple. I'm on SSRS 2005 and I have a report with a matrix object that has one row group and one column group. I need to switch the number format only for values where the column group has a specific value.
For example, here are the records in the table:
Customer, Type, Amount
Customer1, Revenue, -100
Customer2, Cost, 60
Customer1, Revenue, -200
Customer2, Cost, 125
By default the matrix object shows the following (the total comes from the standard subtotal on the column group):
Revenue Cost Total
Customer1 -100 60 -40
Customer2 -200 125 -75
But the users need the report to look like this, with all positives (why, oh why?! ):
Revenue Cost Total
Customer1 100 60 40
Customer2 200 125 75
I was able to use the inscope function to switch the signs of the Total numbers. But now I need to switch the signs of the Revenue column from negative to positive (and vice versa), without affecting the signs of the Cost column. It's strange to me because I CAN switch the signs for a specific row group (changing Customer1's number format, without affecting Customer2's format) using something like this:
=iif(Fields!Customer.Value = "Customer1", "($#,###.#0); $#,###.#0", "$#,###.#0; ($#,###.#0)")
But a similar expression specifying a column group value does not work, because the report seemingly doesn't recognize the value of the column group at all no matter what I do:
=iif(Fields!Type.Value = "Revenue", "($#,###.#0); $#,###.#0", "$#,###.#0; ($#,###.#0)")
The other reason why this is strange is that I've done drill-through reports off of matrix objects where specific column group values (the ones clicked on) can be passed into the drill-through report parameters. So it recognizes the column group values upon drill-through, but not for formatting?
How else can I do this? I must be missing something here. Thanks.
Hi,
How do I programmatically check a row group's Visibility or Expand/Collapse flag in a matrix table? For example, I have a matrix table contains the following groups:
Row groups: Facility --> Category Type --> Category
Column groups --> year, quarter, month
I want to be able to programmatically update the table content if Category rows are not visible (Category Type row group is collapsed).
Thanks.
SouBee
I have 2 higher level column groupings of month name and year above my actual date groups. It looks a little weird aligning them left but there is no guarantee that centering them will even allow them to show until I've scrolled right to the middle of the cell width that they occupy.
Is there a feature that comes with, or a well known trick for making them center in the area that is being viewed instead of the potentially very wide cell that they occupy?
Hi,
Is it possible to create Expand/Collapse functionality for the grouped data in Table and Matrix data regions? Essentially, the idea is for the user to be able to see the group/subgroup data if she wishes to by clicking on (+/-) symbols, as is usually the case in Tree View style data grid control in web apps. Any ideas how to accomplish the same in reporting services?
Thanks.
I got the following code to add a column in a matrix with a variance:
IIF(IsNothing(Previous(Sum(Fields!Amount.Value))) or Fields!year.Value=First(Fields!year.Value,"Category") or Previous(Sum(Fields!Amount.Value))=0,nothing,
(
(Fields!Amount.Value)
/Previous(sum(Fields!Amount.Value))
)
)
This code works fine, except that the first row of the matrix shows an #error
This happens with each matrix where I use this expression. A warning emerges:
rsruntimeerrorinexpression the value expression for the textrun Textbox43.Paragraphs[0].TextRuns[0]' contains an error.
Attempted to divide by zero.
The strange thing is that the part
Fields!year.Value=First(Fields!year.Value,"Category")
should prevent an error and I expect it to show 'nothing'
An screenshot of the table. (each color is a different category. Each row stands for 2013, 2014, 2015)
As you can see, all other 2013 rows show a blank cell, except the first row.
I have a Matrix table that expands to the right when choosing an amount of months to be shown. Under this matrix I have to Charts. The two charts are situated together, that is no space between them, and to the left of the report.
Now, if I choose a lot of months, say three years the matrix diagram will be huge to the right. The problem I have is that the second diagram, the one on the right, moves to the right depending on how big the report gets, and this is not good at all. The two charts are supposed to be all the way to the left.
How? Why does the right chart move?
Thanks in advanced
Kind Regards
I need to include pre k kids in the is script for one school and exclude them for the others. I have them all excluded with the last statement in the where clause. How would I go about accomplishing this.
Code:
SELECT DISTINCT
C.Student_ID,
isnull(left(dbo.capfirst(rtrim([first_name])),12),' ') as First_Name,
isnull(left(dbo.capfirst(rtrim([last_name])),17),' ') as Last_Name,
LEFT(Middle_Name, 1) as Middle_Initial,
RTRIM(CONVERT(CHAR,Birth_Date,101)) AS DOB,
[Code] .....
I am having some difficulty in constructing outer joins. I havesimplified what I need to do and have included sample SQL statements:create table tab_a (id int, descr varchar(10), qty int)insert into tab_a values (1, 'item one', 10)insert into tab_a values (2, 'item two', 20)insert into tab_a values (3, 'item three', 30)insert into tab_a values (4, 'item four', 40)create table tab_b (id2 int, descr2 varchar(10), qty2 int)insert into tab_b values (1, 'item one', 10)insert into tab_b values (2, 'item two', 20)insert into tab_b values (3, 'item three', 30)insert into tab_b values (4, 'item four', 40)Here is the statement that I have:SELECT tab_a.id,tab_a.descr,tab_a.qty,tab_b.id2,tab_b.descr2,tab_b.qty2FROM tab_a LEFT OUTER JOIN tab_bON (tab_a.id = tab_b.id2 )WHERE tab_a.qty <= 30 ANDtab_b.qty2 > 20What I am trying to do is left outer join between tab_a and tab_b afterthey have been filtered based on the qty column. (for tab_a: qty <=30; and for tab_b: qty > 20).How would I go about that? I would like to do this efficiently sincethe two tables have about a million records and several other columnseach.
View 5 Replies View RelatedHi all,I’m a bit new to this so hope this is not too obvious!I am running a query like so (simplified form)Select Cus_no, Cust_Name, course_idWhere Cust_id = 2From course tableHowever not all the Cust_Id’s have been entered therefore so using a twofilters out the information I might need.Is there a way I can get around this?Many thanksSam*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 2 Replies View RelatedIn asp.net 3.5.....
To get the number of rows returned when the select is executed.......
Protected Sub SqlDataSource1_Selected(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceStatusEventArgs) Handles SqlDataSource1.Selected Session("MessageText") = e.AffectedRows & " Profile(s)"End Sub
How do you get the number of rows returned when you apply a filter expression to a selection of rows?
Thanks
Craig
I have a table in SQL 2012 where we add records on daily bases. A col is for user name.
I want to select records with each user and send the same to that user with db mail.
I have worked with VB but I am totally new in this field.
I am trying to multiply 2 columns and filtered by a 3rd.
View 3 Replies View Related
I got this table named 'Streets':
Street (varchar)
PLZ (varchar)
'A'
'?'
'B'
'1'
SELECT * FROM (
SELECT * FROM (
SELECT Strasse,PLZ FROM Streets
) SUB WHERE IsNumeric(PLZ) = 1
) SUB WHERE PLZ = 1
I always receive this error:
Conversion failed when converting the nvarchar value '?' to data type int.
How must the statement look like, to execute this successfully?
I also tried to use a view which returns only valid streets, also a function, but it seems sqlserver tests the row with the '?' anyways
PLZ HELP!
PS: If you want to try it, create the table because using the following instead the table works fine:
SELECT 'A' as Street ,'?' as PLZ
UNION
SELECT 'B','1'
Hello Everyone,
I'm just trying something that I haven't tried before, and I'm wondering if anyone has done it before. I'm building a report with three charts. This chart is going to go inside of Microsoft CRM. One of the charts has to use CRM filtered views, so that a manager can see his whole team's numbers, but a team member will only see his numbers. I can't do this any other way because of the complexity of the query, which has 3 select statements joined together as tables. It would be too complex to try to use a parameter throughout all of those tables, and I'm not sure how I would set up a parameter to show all of the data if the user were the manager, and only the single user's data if it were someone else.
The other two charts use filtered views as well, but they have similar joins, and I had to hard code a column with meaningless data into each SELECT table so that I could use it to join, as the tables had no other similarities.
The problem is that when you upload a report into CRM, if it uses filtered views, you don't have to go into Report Manager and change the data source from a shared to a custom data source. But on reports where I don't use the filtered views, I find that they always break when upload them, because they use the shared data source. This is the case even when I have created the report without the shared data source. So I usually have to go in and change the data source from shared to custom every time I upload a report without filtered views.
Because of the situation I described, this report uses both filtered views and non-filtered views (for the hard-coded columns). When I upload it into CRM, it won't work either way, with a shared or a custom data source.
Has anyone had this problem before?