Max Data Type In SQL2000
Aug 28, 2007
Anything I can use in SQL2000 in place of varchar(max) (only in SQL2005) with a 2 GB-per-instance capacity
DECLARE jkcursor CURSOR
READ_ONLY
FOR SELECT top 100 episodeid,episodedate,journalentry
FROM ccnidcdw.[Pre-AuthThin].dbo.tbljournal
WHERE journalentry like '%CoCustServ%'
DECLARE @episodeid varchar(15), @episodedate datetime, @journal varchar(2gb)
OPEN jkcursor
FETCH NEXT FROM jkcursor INTO @episodeid,@episodedate,@journal
WHILE (@@fetch_status = 0)
BEGIN
print @journal
FETCH NEXT FROM jkcursor INTO @episodeid,@episodedate,@journal
END
CLOSE jkcursor
DEALLOCATE jkcursor
thanks
View 8 Replies
ADVERTISEMENT
Nov 17, 2006
Hi,
I am trying to setup Trans Replication with updating subscriber on sql2000. One column on few tables got data with single quote (').
How do I handle in this case? Did any one come across such case?
Can I Change default QUOTED IDENTIFIER from ' (single quote) to something else (@@@) on SQL2000?
If yes, how to do?
Thanks
mka
View 1 Replies
View Related
Dec 5, 2007
Hi,
Does anyone know how to deal with image data type within stored procedure when using SQL2000?
I have a table and there is an image data type column. In this table I need to make a copy of one row within a table through a SP /it means to retrieve the whole row within SP, change another columns data (but, that the image is not modified) / and save the modified row back to the same table.
Problem is, that within SP is not alowed to use local varaibles of image data type. Does anyone know a solution for this? Please.
Thank you.
View 1 Replies
View Related
Jul 23, 2005
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
Dec 14, 2005
After testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.
System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.
Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.
At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.
anyone having this problem before?? hopefully you guys can help.
Thanks,
View 4 Replies
View Related
Feb 13, 2008
Hi,
I can populate a dataTable with type double (C#) of say '1055.01' however when I save these to the CE3.5 database using a float(CE3.5) I lose the decimal portion. The 'offending' code is:
this.court0TableAdapter1.Update(this.mycourtsDataSet1.Court0);
this.mycourtsDataSet1.AcceptChanges();
this.court0TableAdapter1.Fill(this.mycourtsDataSet1.Court0);
This did not happen with VS2005/CE3.01.
I have tried changing all references to decimal (or money in CE3.5) without luck.
I'm beginning to think that string may be the way to go!!!!!!!
Can someone shed some light on my problem.
Thanks,
Later:
It's necessary to update the datatable adapter as the 3.01 and 3.5 CE are not compatible.
View 4 Replies
View Related
Mar 7, 2007
We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.
I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.
On Error, If I fail the component, then the error is :
There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Regards
RH
View 3 Replies
View Related
May 13, 2008
hello all .. I have a form that includes two textboxes (Date and Version) .. When I try to insert the record I get the following error message .. seems that something wrong with my coversion (Data type)"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
in my SQL database I have the date feild as datetime and the version as nvarchar(max)
this is the code in the vb page .. Can you please tell me how to solve this problem?Imports System.Data.SqlClient
Imports system.web.configuration
Partial Class Admin_emag_insert
Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Record_DateTextBox.Text = DateTime.Now
End Sub
Protected Sub clearButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles clearButton.Click
Me.VersionTextBox.Text = ""
End Sub
Protected Sub addButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles addButton.Click
Dim objConnection As SqlConnection
Dim objDataCommand As SqlCommand
Dim ConnectionString As String
Dim record_date As Date
Dim version As String
Dim emagSQL As String
'save form values in variables
record_date = Record_DateTextBox.Text
version = VersionTextBox.Text
ConnectionString = WebConfigurationManager.ConnectionStrings("HRDBConnectionString").ConnectionString
'Create and open the connection
objConnection = New SqlConnection(ConnectionString)
objConnection.Open()
emagSQL = "Insert into E_Magazine (Record_Date, Version ) " & _
"values('" & record_date & "','" & version & "')"
'Create and execute the command
objDataCommand = New SqlCommand(emagSQL, objConnection)
objDataCommand.ExecuteNonQuery()
objConnection.Close()
AddMessage.Text = "A new emagazine was added successfully"
Me.VersionTextBox.Text = ""
End Sub
End Class
View 10 Replies
View Related
Jul 20, 2005
Hi,I would like to convert a dollar amount ($1,500) to represent Fifteenhundred dollars and 00/100 cents only for SQL reporting purposes. Isthis possible and can I incorporate the statement into an existingleft outer join query.Thanks in advance,Gavin
View 1 Replies
View Related
Sep 12, 2006
Hi,
I have a user defined data type which is called DEmployeeName,
it's length is varchar(20), how do i change it into varchar(30) without droping it?
I'm using SQL server 2005.
Thanks in advance..
View 1 Replies
View Related
Oct 9, 2007
I have a field that is currently stored as the data type nvarchar(10), and all of the data in this field is in the format mm/dd/yyyy or NULL. I want to convert this field to the smalldatetime data type. Is this possible?
I've tried to use cast in the following way, (rsbirthday is the field name, panelists is the table), but to no avail.
SELECT rsbirthday CAST(rsbirthday AS smalldatetime)
FROM panelists
the error returned is "incorrect syntax near 'rsbirthday'.
I'm rather new to all things SQL, so I only have the vaguest idea of what I'm actually doing.
Thanks for the help!
View 10 Replies
View Related
Jan 28, 2008
update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
View 5 Replies
View Related
Apr 16, 2008
Hi,
The table in SQL has column Availability Decimal (8,8)
Code in c# using sqlbulkcopy trying to insert values like 0.0000, 0.9999, 29.999 into the field Availability
we tried the datatype float , but it is converting values to scientific expressions€¦(eg: 8E-05) and the values displayed in reports are scientifc expressions which is not expected
we need to store values as is
Error:
base {System.SystemException} = {"The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column."}
"System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.ArgumentException: Parameter value '1.0000' is out of range.
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
at System.Data.SqlClient.SqlBulkCopy.WriteToServerInternal()
at System.Data.SqlClient.SqlBulkCopy.WriteRowSourceToServer(Int32 columnCount)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table, DataRowState rowState)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table)
at MS.Internal.MS
COM.AggregateRealTimeDataToSQL.SqlHelper.InsertDataIntoAppServerAvailPerMinute(String data, String appName, Int32 dateID, Int32 timeID) in C:\VSTS\MXPS Shared Services\RealTimeMonitoring\AggregateRealTimeDataToSQL\SQLHelper.cs:line 269"
Code in C#
SqlBulkCopy bulkCopy = new SqlBulkCopy(sqlConnection, SqlBulkCopyOptions.Default);
DataRow dr;
DataTable dt = new DataTable();
DataColumn dc;
try
{
dc = dt.Columns.Add("Availability", typeof(decimal));
€¦.
dr["Availability"] = Convert.ToDecimal(s[2]); ------ I tried SqlDecimal
€¦€¦€¦.
}
bulkCopy.DestinationTableName = "dbo.[Tbl_Fact_App_Server_AvailPerMinute]";
bulkCopy.WriteToServer(dt);
thx
View 8 Replies
View Related
Jul 6, 2006
I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package3.dtsx" finished: Failure.
View 5 Replies
View Related
Apr 19, 2008
Advance thanks ....... My table is TimeSheet:----------------------------------- CREATE TABLE [dbo].[TimeSheet]( [autoid] [int] IDENTITY(1,1) NOT NULL, [UserId] [int] NOT NULL, [starttime] [datetime] NOT NULL, [endtime] [datetime] NOT NULL, [summary] [nvarchar](50) NOT NULL, [description] [nvarchar](50) NULL, [dtOfEntry] [datetime] NOT NULL, [Cancelled] [bit] NULL) ON [PRIMARY] My Query is------------------ insert into timesheet (UserId, StartTime,EndTime, Summary, Description,DtOfEntry) values (2, '19/04/2008 2:05:06 PM', '19/04/2008 2:05:06 PM', '66', '6666','19/04/2008 2:05:06 PM')i m not able to insert value Error Message is-------------------------Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated. can any body give any solution
View 5 Replies
View Related
Aug 3, 2005
Hey, I have a big problem that i wanna search data from SQL by DateTime like thatselect * from test where recorddate='MyVariableWhichHoldDate'i use variable that holds Date info.i searched a lot infomation on net but there is no perfect solution. i know why this occur but there is no function to solve this problem. i used a lot of ways. it accept yyyy-mm-dd format but my variable format is dd-mm-yyyyy . is there any function for this problem? and any other solution.thanks for ur attentionregards
View 6 Replies
View Related
Mar 30, 2007
I am using Visual Studio 2005 and SQL Express 2005. The database was converted from MS Access 2003 to SQL Express by using the upsize wizard.
I would like to store the current date & time in a column in a table. This column is a smalldatetime column called 'lastlogin'.
The code I'm using is:
Dim sqlcommand As New SqlCommand _
("UPDATE tableXYZ SET Loggedin = 'True', LastLogin = GetDate() WHERE employeeID = '" & intEmployeeID.ToString & "'", conn)
Try
conn.Open()
sqlcommand.ExecuteNonQuery()
conn.Close()
Catch ex As Exception
MessageBox.Show(ex.Message)
End Try
This code works fine on my local machine and local SQL server. However at the client side this code results in the error as mentioned in the subject of this thread. I first used 'datetime.now' instead of 'getdate()', but that caused the same error. Then I changed the code to 'getdate()', but the error still remains.
The server at the client is running Windows Server 2000 UK . My local machiine is running WIndows XP Dutch.
Maybe the conversion from Dutch to UK has something to do with it. But this should be solved by using the 'Getdate()' function..... ?
View 1 Replies
View Related
Jul 23, 2007
I'm trying to use the SSIS Execute SQL Task to pull XML from a SQL 2005 database table. The SQL is of the following form:
SELECT
(
SELECT
MT.MessageId 'MessageId',
MT.MessageType 'MessageType',
FROM MessageTable MT
ORDER BY MT.messageid desc
FOR XML PATH('MessageStatus'), TYPE
)
FOR XML PATH('Report'), TYPE
For some reason I can only get this query to work if I use an ADO.NET connection type. If I try to use something like the OLEDB connection I get the following error:
<ROOT><?MSSQLError HResult="0x80004005" Source="Microsoft XML Extensions to SQL Server" Description="No description provided"?></ROOT>
Can anyone tell me why the SELECT ... FOR XML PATH... seems only to work with ADO.NET connections?
Thanks
Walter
View 1 Replies
View Related
Jun 18, 2002
Can anyone point me to a white paper/discussion on the issues of gaining access to SQL2000 data from a SQL7 installation? I'm about to upgrade servers from 7 to 2000, but a few of the servers exchange data bi-directionally and the upgrade to both servers at the same time would be problematic; thus the need at some point to get at the SQL2000 data from the SQL7 server.
Thanks,
AL
View 1 Replies
View Related
Jul 20, 2005
I have to setup some scheduled tasks to copy 3-4 tables from anSQL2000 database to DB2 v. 8.1.The job must run every night replacing all data.How can this be done - with standard utilities??Please be exact - I'm new to this.Thank for any help./Jep
View 1 Replies
View Related
Jul 20, 2005
How can I export data from SQL2000 to XML?Is there any tools with SQL for that?I don't want to use "for xml explicit"...*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
Mar 15, 2007
I am trying to retrieve data that has been inserted into the database but only half the text is being displayed.
The field is varchar(8000)
In the Enterprise Manager I can view the data, then I copy and paste it into MS Word and everything is there.
851 Characters with spaces.
However, when I enter the SQL code into SQL Query Analyzer only half the text shows, about 257 characters are displayed with spaces.
When I display the information on the webpage only half the text is displayed (running IIS/PHP 5)
I don't know why this is doing this and not sure what I can do to display the full text.
Please help.
View 4 Replies
View Related
Oct 19, 2006
I am trying to put the data from a field in my database into a row in a table using the SQLDataSource.Select statement. I am using the following code: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'" myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)But when I run the code, I get the following error:Server Error in '/YorZap' Application. Unable to cast object of type 'System.Data.DataView' to type 'System.String'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.Source Error: Line 54: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'"
Line 55: 'myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments).GetEnumerator.Current, String)
Line 56: myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)
Line 57:
Line 58: filesTable.Rows.Add(myDataRow)Source File: D:YorZapdir_list_sort.aspx Line: 56 Stack Trace: [InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.]
ASP.dir_list_sort_aspx.BindFileDataToGrid(String strSortField) in D:YorZapdir_list_sort.aspx:56
ASP.dir_list_sort_aspx.Page_Load(Object sender, EventArgs e) in D:YorZapdir_list_sort.aspx:7
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +13
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +45
System.Web.UI.Control.OnLoad(EventArgs e) +80
System.Web.UI.Control.LoadRecursive() +49
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3743
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210 Please help me!
View 3 Replies
View Related
May 17, 2006
Dear all,
I am stuck with a SSIS package and I can€™t work out. Let me know what steps are the correct in order to solve this.
At first I have just a Flat File Source and then Script Component, nothing else.
Error:
[Script Component [516]] Error: System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to class type 'System.Data.SqlClient.SqlConnection'. Instances of types that represent COM components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface. at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction)
Script Code (from Script Component):
' Microsoft SQL Server Integration Services user script component
' This is your new script component in Microsoft Visual Basic .NET
' ScriptMain is the entrypoint class for script components
Imports System
Imports System.Data.SqlClient
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Public Class ScriptMain
Inherits UserComponent
Dim nDTS As IDTSConnectionManager90
Dim sqlConnecta As SqlConnection
Dim sqlComm As SqlCommand
Dim sqlParam As SqlParameter
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Dim valorColumna As String
Dim valorColumna10 As Double
valorColumna = Row.Column9.Substring(1, 1)
If valorColumna = "N" Then
valorColumna10 = -1 * CDbl(Row.Column10 / 100)
Else
valorColumna10 = CDbl(Row.Column10 / 100)
End If
Me.Output0Buffer.PORCRETEN = CDbl(Row.Column11 / 100)
Me.Output0Buffer.IMPRETEN = CDbl(Row.Column12 / 100)
Me.Output0Buffer.EJERCICIO = CInt(Row.Column2)
Me.Output0Buffer.CODPROV = CInt(Row.Column7)
Me.Output0Buffer.MODALIDAD = CInt(Row.Column8)
Me.Output0Buffer.NIFPERC = CStr(Row.Column3)
Me.Output0Buffer.NIFREP = CStr(Row.Column4)
Me.Output0Buffer.NOMBRE = CStr(Row.Column6)
Me.Output0Buffer.EJERDEV = CDbl(Row.Column13)
With sqlComm
.Parameters("@Ejercicio").Value = CInt(Row.Column2)
.Parameters("@NIFPerc").Value = CStr(Row.Column3)
.Parameters("@NIFReP").Value = CStr(Row.Column4)
.Parameters("@Nombre").Value = CStr(Row.Column6)
.Parameters("@CodProv").Value = CInt(Row.Column7)
.Parameters("@Modalidad").Value = CInt(Row.Column8)
.Parameters("@ImpBase").Value = valorColumna10
.Parameters("@PorcReten").Value = CDbl(Row.Column11 / 100)
.Parameters("@ImpReten").Value = CDbl(Row.Column12 / 100)
.Parameters("@EjerDev").Value = CDbl(Row.Column13)
.ExecuteNonQuery()
End With
End Sub
Public Overrides Sub AcquireConnections(ByVal Transaction As Object)
Dim nDTS As IDTSConnectionManager90 = Me.Connections.TablaMODELO80
sqlConnecta = CType(nDTS.AcquireConnection(Nothing), SqlConnection)
End Sub
Public Overrides Sub PreExecute()
sqlComm = New SqlCommand("INSERT INTO hac_modelo180(Ejercicio,NIFPerc,NIFReP,Nombre,CodProv,Modalidad,ImpBase,PorcReten,ImpReten,EjerDev) " & _
"VALUES(@Ejercicio,@NIFPerc,@NIFReP,@Nombre,@CodProv,@Modalidad,@ImpBase,@PorcReten,@ImpReten,@EjerDev)", sqlConnecta)
sqlParam = New SqlParameter("@Ejercicio", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFPerc", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFReP", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Nombre", Data.SqlDbType.VarChar)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@CodProv", Data.SqlDbType.TinyInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Modalidad", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpBase", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@PorcReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@EjerDev", Data.SqlDbType.Decimal)
sqlComm.Parameters.Add(sqlParam)
End Sub
Public Sub New()
End Sub
Public Overrides Sub ReleaseConnections()
nDts.ReleaseConnection(sqlConnecta)
End Sub
Protected Overrides Sub Finalize()
MyBase.Finalize()
End Sub
End Class
Thanks a lot for your help
View 13 Replies
View Related
Apr 23, 2007
I get the following message in the vs2005 querybuilder when i do a preview:
***********************************
SQL Execution Error.
Executed SQL statement: SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = @PARAM1)
Error Source: SQL Server Compact Edition ADO.NET Data Provider
Error Message: @PARAM1 : Unable to cast object of type 'System.Data.SqlTypes.SqlInt32 to type System.IConvertable'.
****************************************
The same querypreview works fine without the parameter:
SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = 186)
Can anybody tell me why this is?
And tell me a way to get the tableadapter working?
Anne-Jan Tuinstra
View 3 Replies
View Related
Oct 21, 2005
Hi,I am very, very new to SQL, so be patient.On a W2K3-server runs SQL2000 (Sp3a). I have a database in MSAccess (2003) and want to importthe data with the wizard. All went well and I got the whole database in SQL.Now I am back in VS.net and want to create a SQLAdapter and when doing that I got the warning:UPDATE and DELETE statement. Could not determin which columns uniquely identify the rows for "<Table>".The structure of "<Table>" in MSAccess was:Id (auto) as primary keyField1 (text,50)Field2 (text,50)That's all.The structure of the SQL-table after importing-Wizard:Id (int, Not Null)Field1 (nvarchar(50),Null)Field2 (nvarchar(50),Null)Why cannot SQL recognise this primary key ?Regards, Ger.
View 3 Replies
View Related
May 6, 2002
My company recently purchase a NetApp FS870 and we want to move the SQL data files for out production DB. The NetApp is a NAS. Without loggining in to the SQL Server and establishing a drive mapping.
Does anyone know how to connect SQL2K to the remote machine?
We would prefer to use UNC naming to access the share, as leaving servers logged in and open with a mapped drive is a huge secutrity hole, and presents a reliability issue too.
Thanks
Greg
View 1 Replies
View Related
Oct 22, 2007
Hi
I have a (possibly) common position where half of our IT department is SQL 2005 and the rest is SQL2000. For myself, having to work in a SQL2000 environment and needing data from a SQL2005 Cluster I came up with this solution.
Also, to alert me when the process starts and completes since it is part of a scheduled process, I have it do a RAISERROR with logging to record entry and exit times. In addition, this runs out a series of PRINT statements that lets the operator know what table is currently being worked on.
Of course, any suggestions for speeding this up would be helpful!
What I have found that works for getting data (albeit slow) from SQL 2005 down to SQL 2000 is to script a fairly simple copy process -
-- it is actually pretty easy to follow if you just read the code......
-- first, we find all the views which are present, so they can be ignored when copying the raw data
CREATE TABLE #VIEWS (TABLE_NAME NVARCHAR (255) )
INSERT #VIEWS
SELECT TABLE_NAME FROM
OPENDATASOURCE(
'SQLOLEDB',
Data Source=SQL2005server;User ID=trust_me;Password=i_know_what_i_am_doing' )
.SQL_SIS_SYSTEM.INFORMATION_SCHEMA.VIEWS
-- now, we get the actual tables with data
CREATE TABLE #TEMP (TBL_SCHEMA VARCHAR (12), TBL_NAME VARCHAR (255), RECCNT INT )
INSERT #TEMP
SELECT TABLE_SCHEMA , TABLE_NAME FROM
OPENDATASOURCE( 'SQLOLEDB', 'Data Source=SQL2005server;User ID=trust_me;Password=i_know_what_i_am_doing' )
.SQL_SIS_SYSTEM.INFORMATION_SCHEMA.TABLES
WHERE TABLE_TYPE = 'BASE TABLE'
AND TABLE_NAME NOT IN (SELECT TABLE_NAME FROM #VIEWS)
-- then, we start copying tables over - now we tag the ones which are populated with at least 1 row.
-- the first cursor loop gets all table names, the second will find row counts of source tables.
-- this segment uses (ugh) cursor to loop through and gather all of the data. This cursor is at the table name level - not
-- processing anything, and is used only to find tables which have a rowcount > 0
-- believe it or not, the cursors run pretty darn quickly since they arnet doing any calculations - just finding
-- tables with row counts > 0
SET @QUOT = CHAR(39)
SET @LBRAKT = '['
SET @RBRAKT = ']'
SET @IUT = 'IsUserTable'
SET @ODBC_CMD ='(' + @QUOT + 'SQLOLEDB' + @QUOT + ',' + @QUOT + 'Data Source=SQL2005server;User ID=trust_me;Password=i_know_what_i_am_doing' + @QUOT +
').SQL_SIS_SYSTEM.dbo.'
PRINT 'BEGIN TABLE SCHEMA LOAD CURSOR. ' + CAST(GETDATE() AS VARCHAR (50) )
DECLARE GETEM CURSOR FOR
SELECT TBL_SCHEMA, TBL_NAME FROM #TEMP
OPEN GETEM
FETCH NEXT FROM GETEM INTO @TBL_SCHEMA, @TBL_NAME
WHILE @@FETCH_STATUS = 0
BEGIN
SET @SQL = 'UPDATE #TEMP SET RECCNT = ' +
'(SELECT COUNT(*) FROM OPENDATASOURCE(' +
@QUOT + 'SQLOLEDB'+ @QUOT + ',' + @QUOT +''Data Source=SQL2005server;User ID=trust_me;Password=i_know_what_i_am_doing' + @QUOT +
').SQL_SIS_SYSTEM.' + @TBL_SCHEMA + '.' + @TBL_NAME +')' +
' WHERE TBL_NAME = ' + @QUOT + @TBL_NAME + @QUOT
EXEC (@SQL)
FETCH NEXT FROM GETEM INTO @TBL_SCHEMA, @TBL_NAME
END
CLOSE GETEM
DEALLOCATE GETEM
PRINT 'FINIS TABLE SCHEMA LOAD CURSOR. ' + CAST(GETDATE() AS VARCHAR (50) )
DECLARE @PLIN VARCHAR (80),@LFT_PLIN VARCHAR (20),
@RT_PLIN VARCHAR (20), @TLIN INT
PRINT 'BEGIN TABLE CHECK AND LOAD CURSOR.'
DECLARE FETCHIT CURSOR FOR
SELECT TBL_NAME, RECCNT FROM #TEMP WHERE RECCNT > 0
OPEN FETCHIT
FETCH NEXT FROM FETCHIT INTO @TBL_NAME, @RECCNT
WHILE @@FETCH_STATUS = 0
BEGIN
PRINT 'CHECKING ' + @LBRAKT+ @TBL_NAME + @RBRAKT
IF NOT EXISTS (SELECT * FROM dbo.sysobjects
WHERE id = object_id
(@LBRAKT+ @TBL_NAME + @RBRAKT )
AND OBJECTPROPERTY(id,''+@IUT) = 1)
BEGIN
SET @LFT_PLIN = 'OBJECT' + SPACE(5)
SET @RT_PLIN = SPACE(5) + 'NOT FOUND. BUILD ' +
CAST(@RECCNT AS VARCHAR (6) ) + ' rowS.'
SET @PLIN = @LFT_PLIN + @LBRAKT+ @TBL_NAME + @RBRAKT
SET @TLIN = LEN(@PLIN)
SET @PLIN = @PLIN + SPACE(50 - @TLIN) + @RT_PLIN
PRINT 'ENTRY. ' + CAST(GETDATE() AS VARCHAR (50) )
PRINT @PLIN
PRINT 'COPYING DATABASE TABLE.'
SET @SQL = ' SELECT * INTO ' + @TBL_NAME +
' FROM OPENDATASOURCE' + @ODBC_CMD + @TBL_NAME
EXEC (@SQL)
PRINT 'COMPLETED. ' + CAST(GETDATE() AS VARCHAR (50) )
END
IF EXISTS (SELECT * FROM dbo.sysobjects
WHERE id = object_id
(@LBRAKT+ @TBL_NAME + @RBRAKT )
AND OBJECTPROPERTY(id,''+@IUT) = 1)
-- #TEMP (RECCNT) CONTAINS ROW COUNT OF SOURCE SYSTEM.
-- COMPARE TO ROW COUNT OF LOCAL TABLE
BEGIN
SELECT @DEST_RECCNT = RECCNT FROM #TEMP
WHERE TBL_NAME = @TBL_NAME
IF @DEST_RECCNT = @RECCNT
BEGIN
PRINT 'TABLE row COUNT MATCHES. BYPASSING REBUILD.'
END
IF @DEST_RECCNT <> @RECCNT
BEGIN
SET @SQL = 'DROP TABLE ' + @TBL_NAME
EXEC (@SQL)
SET @LFT_PLIN = 'OBJECT' + SPACE(5)
SET @RT_PLIN = SPACE(5) + 'REBUILD.' +
CAST(@RECCNT AS VARCHAR (6) ) + ' rowS.'
SET @PLIN = @LFT_PLIN + @LBRAKT+ @TBL_NAME + @RBRAKT
SET @TLIN = LEN(@PLIN)
SET @PLIN = @PLIN + SPACE(50 - @TLIN) + @RT_PLIN
PRINT 'ENTRY. ' + CAST(GETDATE() AS VARCHAR (50) )
PRINT @PLIN
PRINT 'COPYING DATABASE TABLE.'
SET @SQL = ' SELECT * INTO ' + @TBL_NAME +
' FROM OPENDATASOURCE' + @ODBC_CMD + @TBL_NAME
EXEC (@SQL)
PRINT 'COMPLETED. ' + CAST(GETDATE() AS VARCHAR (50) )
END
END
FETCH NEXT FROM FETCHIT INTO @TBL_NAME, @RECCNT
END
CLOSE FETCHIT
DEALLOCATE FETCHIT
PRINT 'FINIS TABLE CHECK AND LOAD CURSOR.'
XIT:
RAISERROR (50002,010,1) WITH LOG -- FLAG COMPLETION TIME IN SQL LOG
SET QUOTED_IDENTIFIER OFF
View 1 Replies
View Related
Mar 4, 2005
Does anyone know how to upload (bulk) data from a client (written in Excel VBA) to a remote SQL2000 database? Of coarse I tried "INSERT INTO" and rst.addnew but I noticed this is much, much slower as downloading from the same remote database.
Thanks.
View 3 Replies
View Related
Apr 27, 2006
Vb stores an image (bitmap/jpg) in a SQL2000 image field. For somereason it doubles the size by adding 00 for each byte. But sometimes itdoesn't add 00 (0000.0000) but 01 or 20 or ?? and also the byte thatshould be transferd is changed...So SQLImageData = Imagebyte + 00and sometimesSQLImageData = CHANGEDImagebyte + xx.Some example data: (hex notation):A1 => A1 0003 => 03 00-----------91 => 18 2083 => 92 018C => 52 01Could anybody give me an explanation, because I need to know what ishappening, so I can remove te extra bytes added......I have already a image when I remove the extra bytes, but with somewrong data (on the place where things like 8C => 52 01 happen)....Thx,Geronimo
View 2 Replies
View Related
Aug 8, 2006
Hello. I want to ask about the possibility of copying both a tablestructure and it's contents from aSQL server table to a table within MS access. The problem cannot besolve with a permanent table structure at the target location.The names of the columns are essentially data with the application andso are subject to change. I am targeting a solution using SQL QueryManager.The approach I have tried (with failure) isSELECT *INTO <linkedserver table>FROM <local table>This should create and copy. However, I am not sure if this isachievable with this approach.Refer to the dialogue;-------------------------------------------------------USE MASTERGOEXEC sp_addlinkedserver@SERVER = 'Freddie',@PROVIDER = 'Microsoft.Jet.OLEDB.4.0',@SRVPRODUCT = 'OLE DB Provider for Jet',@DATASRC = 'C: empHMIS_Recipe.mdb'-- I am not sure if this is requiredEXEC sp_addlinkedsrvlogin 'Freddie', false, 'sa', 'Admin', NULLSELECT * FROM Freddie...FRED -- This is OKSELECT * INTO #Temp FROM Freddie...FRED -- This is OK-- This fails - Refer errorSELECT * INTO Freddie.FRED65from #tempServer: Msg 2760, Level 16, State 1, Line 1Specified owner name 'Freddie' either does not exist or you do not havepermission to use it.-- This also fails and I thought reflected the above select with naming- Refer errorSELECT * INTO Freddie...FRED65from #tempServer: Msg 117, Level 15, State 1, Line 2The object name 'Freddie...' contains more than the maximum number ofprefixes. The maximum is 2.EXEC sp_dropserver 'Freddie',@droplogins = 'droplogins'------------------------------------------------------------Thank you.Regards JC...
View 3 Replies
View Related
Jun 18, 2006
I had to upgrade to SQL2005 when my customer did so. Everything went OK until I had to load additional data to the datamart. The SQL2000 task to load data from flat text files was straight forward and literally took me seconds tyo set up and execute and has never given me problems. I have now spent 3 days straight trying to do the same in SQL2005 going in ever wider circles. I have got SSIS up and going, I saved a dtsx package that won't run without a multitude of errors ranging from truncation errors (which I tried to avoid by meticulously ensuring all field definitions on the import and export side are defined and correct) to errors relating to not being able to connect to the database I am working on or of not having the right security access. I am at my wits end. I need help!
View 8 Replies
View Related
Sep 17, 2006
i have sql2000 & sql2005 on the same machine. I am unable to register my localhost in sql2000, get an access denied error. How can I make my localhost use sql2000 database?
View 1 Replies
View Related