Hello,
I am running this query
"delete from ims_domains where id=61"
and got the error
Maximum stored procedure, function, trigger, or view nesting level exceeded (limit 32)
Please let me know what should be the reason?
Thanks,
Ravi
Hi,
I face this error when i try to run my store procedure.
The sample of store procedure as following:
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
CREATE PROCEDURE sp_addUserAccess
with encryption
AS
SET NOCOUNT ON
DECLARE @COUNTER INT
SET @COUNTER = 0
DECLARE @i_compId INT
BEGIN
DECLARE C1 SCROLL CURSOR FOR
SELECT i_compId
FROM ltd_cms_company WHERE (i_owner = 176 or i_owner = 268) AND ti_recStatus = 1
END
OPEN C1
FETCH ABSOLUTE @COUNTER FROM C1 INTO
@i_compId
WHILE @@FETCH_STATUS = 0
BEGIN
INSERT INTO ltd_cms_userAccess ( i_loginId, i_groupId, i_compId, ti_updComp, ti_updLog, ti_updAccess, ti_owner, ti_acctMgr, ti_updContact, ti_updEvent )
VALUES ( 124, 0, @i_compId, 1, 1, 1, 1, 1, 1, 1)
SET @COUNTER = @COUNTER + 1
FETCH ABSOLUTE @COUNTER FROM C1 INTO
@i_compId
END
CLOSE C1
DEALLOCATE C1
SET NOCOUNT OFF
anyone can help me identify this error?
Thanks
Regards,
Jojomay
Hi all, I get this message when trying to update a tabel i have whichhas nested hierarchies.The current hierarchies beginning from root = 1 are up to the level 5.Before going into details and sample data with all the sql queries andprocedures, this limitation from Microsoft for nested levels .. isthere any way or trick to increase the level in generic?
View 1 Replies View RelatedI have created a delete trigger in Table1 and Table2. Once I delete a certain record in Table1 it will also delete that record in Table2 or vice versa. But once i delete certain record either in Table1 or Table2 it will create an error "Maximum stored procedure, function, trigger, or view nesting level exceeded (limit 32).". Can you help me on this?
View 4 Replies View RelatedHi all,
I have writen a Function which call's the same function it self. I'm getting the error as below.
Maximum stored procedure, function, trigger, or view nesting level exceeded (limit 32).
Can any one give me a solution for this problem I have attached the function also.
CREATE FUNCTION dbo.GetLegsFor(@IncludeParent bit, @EmployeeID float)
RETURNS @retFindReports TABLE (EmployeeID float, Name nvarchar(255), BossID float)
AS
BEGIN
IF (@IncludeParent=1)
BEGIN
INSERT INTO @retFindReports SELECT MemberId,Name,referredby FROM Amemberinfo WHERE Memberid=@EmployeeID
END
DECLARE @Report_ID float, @Report_Name nvarchar(255), @Report_BossID float
DECLARE RetrieveReports CURSOR STATIC LOCAL FOR
SELECT MemberId,Name,referredby FROM Amemberinfo WHERE referredby=@EmployeeID
OPEN RetrieveReports
FETCH NEXT FROM RetrieveReports INTO @Report_ID, @Report_Name, @Report_BossID
WHILE (@@FETCH_STATUS = 0)
BEGIN
INSERT INTO @retFindReports SELECT * FROM dbo.GetLegsFor(0,@Report_ID)
INSERT INTO @retFindReports VALUES(@Report_ID,@Report_Name, @Report_BossID)
FETCH NEXT FROM RetrieveReports INTO @Report_ID, @Report_Name, @Report_BossID
END
CLOSE RetrieveReports
DEALLOCATE RetrieveReports
RETURN
END
HI ALL,
I AM USING SQL SERVER 2005.
I HAVE RETURN A RECURSIVE FUNCTION TO FIND OUT WHETHER THE NEXT DATE DOES NOT FALL WITHIN HOLIDAYS
BUT I AM GETING THIS ERROR
Maximum stored procedure, function, trigger, or view nesting level exceeded (limit 32).
THE CODE I USED IS
alter FUNCTION [dbo].[GetNextDay](@dt datetime , @empcode varchar(50) )
RETURNS datetime
AS
BEGIN
DECLARE @zoneid VARCHAR(50)
declare @lvlflag varchar(50)
declare @utdt DATETIME
DECLARE @RETDT DATETIME
DECLARE @COMPDT DATETIME
Select @lvlflag= b.ulm_user_field_flag from bbraun_emis.dbo.emp_reference a join bbraun_emis.dbo.user_lvl_master b on b.ulm_user_lvl_id = a.ER_USER_LVL and a.er_emp_code = @empcode
SELECT @zoneid = ZONECODE FROM bbraun_emis.dbo.VWREGIONLINK WHERE CITYCODE IN (SELECT DISTINCT HM_CITY_CODE FROM bbraun_emis.dbo.HOSP_MASTER WHERE HM_HOSP_CODE IN (SELECT HER_HOSP_CODE FROM bbraun_emis.dbo.HOSP_EMP_REL WHERE HER_EMP_CODE in(@EMPCODE)))
select @compdt = holiday_date from oriffconnect.dbo.holiday_master where zone_code = @zoneid and field_staff = @lvlflag and holiday_date = @dt
if(@@ROWCOUNT = 0)
begin
Select @utdt = DATEADD(dd,1,@utdt)
SeT @utdt = ([dbo].[GetNextDay](@utdt , @empcode))
end
IF(@@ROWCOUNT <> 0)
begin
set @utdt = @dt
end
Select @RETDT = @utdt
RETURN @RETDT
END
PLEASE HELP
hi I have another question to ever so helpful forum
I am trying to nest stored procedure but I guess it is not the way to do it as it does not work:
CREATE PROCEDURE dbo.GetSharesTransactionsbyDates
(
@Startdate as char(10),
@Enddate as char(10)
)
AS
dbo.GetSharesTransactionsData /*tryting to nest sproc*/
WHERE TRANS_DATE BETWEEN @Startdate and @Enddate
I get complain that dbo is incorrect syntax
ST.Proc. which I try to call call is basicly a select statement with no parameters:
ALTER PROCEDURE dbo.GetSharesTransactionsData
AS
SELECT TRANS_DATE, TYPE_DESCRIPTION, SHARE_SYMBOL, SHARES_QUANTITY,
ROUND(PRICE_PER_SHARE,2) AS PRICE_PER_SHARE, COMMISSION_VALUE,
STAMP_DUTY,
dbo.GetShareTransactionTotalValue(PRICE_PER_SHARE,STAMP_DUTY,COMMISSION_VALUE,
SHARES_QUANTITY,CASH_AMOUNT, TYPE_DESCRIPTION) AS TOTAL_VALUE,/*calling function*/
ACCOUNT_NAME
FROM SHARES_TRANSACTIONS
WHERE (TYPE_DESCRIPTION = 'Sell') OR
(TYPE_DESCRIPTION = 'Buy') OR
(TYPE_DESCRIPTION = 'Cash Divident')
ORDER BY TRANS_DATE
I am maintaining an application where most of the business rules are inTriggers, Stored Procedures and User Defined Functions. When a bugarises, it can get very tedious to debug. Today for example, I wantedto modify a function that was being called by a trigger. The problemis that I don't want to change the function, for fear that it is beingcalled by one of the other SP's or triggers in the database (there arehundreds of them)Essentially, I need a tool that allows me to view where functions andsp's are being referenced from. At the very least, I'd like to performa "full text search" in the database objects, so that let's say I havea function named "fn_doSomething", I can search the schema for thisstring and get all the places where it appears.As you can see, I'm in the dark here. I've never worked on a systemwhere all business rules are at the database level. If you know of atool that does what I describe above, or anything else that wouldfacilitate my life, please let me know!Thanks for your help,Marc
View 5 Replies View RelatedI have a problem (who not?) with a function which i'm using in a view.This function is a function which calculates a integer value of adate. For example: '12/31/2004 00:00:00" becomes 20041231. This isvery handy in a datawarehouse and performes superfast. But here is myproblem.My calendar table is limited by a couple of years. What happens isthat sometimes a value is loaded which is not in the range of theCalendardate. What we want to do is when a date is loaded is that thisfunction insert a minimum date when date < minimum date and a maximumdate when date > maximum date.Yes i know you're thinking : This is datamanipulation and yes this istrue. But now we loose information in our cubes and reports by innerjoining. So if we can use a minimum and a maximum than a user wouldsay: "This is strange, a lot of values on 1980/1/1!" instead of "Ithink that i have not all the data!"GreetzHennie
View 2 Replies View RelatedBecause of an error in google or underlying site i can reply on my ownissue. Therefore i copied the former entered message in this message.-------------------------------------REPY----------------------------------Hi Maybe i wasn't clear. I want to dynamically check whether what thelowest date and the highest date is in the calendar table. Thepresented solutions has fixed dates and i don't want that.If i could store a global variable in SQL server (dynamic properties?)then it would be great. Fill this once and call it multiple times inmy intensively used function. Is this possible?GreetzHennie----------------------------Previously enteredissue-----------------------I have a problem (who not?) with a function which i'm using in a view.This function is a function which calculates a integer value of adate. For example: '12/31/2004 00:00:00" becomes 20041231. This isvery handy in a datawarehouse and performes superfast. But here is myproblem.My calendar table is limited by a couple of years. What happens isthat sometimes a value is loaded which is not in the range of theCalendardate. What we want to do is when a date is loaded is that thisfunction insert a minimum date when date < minimum date and a maximumdate when date > maximum date.Yes i know you're thinking : This is datamanipulation and yes this istrue. But now we loose information in our cubes and reports by innerjoining. So if we can use a minimum and a maximum than a user wouldsay: "This is strange, a lot of values on 1980/1/1!" instead of "Ithink that i have not all the data!"GreetzHenniePlaats een reactie op dit berichtBericht 2 van deze discussieVan:John Bell (jbellnewsposts@hotmail.com)Onderwerp:Re: Intensively used function in view needs a minimum andmaximum from a tableView this article onlyDiscussies:comp.databases.ms-sqlserverDatum:2004-12-30 03:56:25 PSTHiIf you LEFT or RIGHT JOIN to the calendar table you will get a NULLvaluefor the column, you can then is CASE to determine the valueCREATE FUNCTION ConvertDate (@datevalue datetime)RETURNS INTASBEGINDECLARE @dateint INTSELECT @dateint = CAST( CASE WHEN A.Date < '20030101' THEN '19800101'WHEN A.Date > '20051231' THEN '99991231'ELSE CONVERT(CHAR(4),C.[Year]) + RIGHT('0'+CONVERT(VARCHAR(2),C.[Month]),2) + RIGHT('0'+CONVERT(VARCHAR(2),C.[Day]),2)END AS INT )FROM ( SELECT @datevalue AS [Date] ) ALEFT JOIN CALENDAR C ON C.[Date] = A.[Date]RETURN @dateintENDGOJohn"Hennie de Nooijer" <hdenooijer@hotmail.com> wrote in messagenews:191115aa.0412300238.7dee0f85@posting.google.c om...[color=blue]>I have a problem (who not?) with a function which i'm using in a[/color]view.[color=blue]> This function is a function which calculates a integer value of a> date. For example: '12/31/2004 00:00:00" becomes 20041231. This is> very handy in a datawarehouse and performes superfast. But here is my> problem.>> My calendar table is limited by a couple of years. What happens is> that sometimes a value is loaded which is not in the range of the> Calendardate. What we want to do is when a date is loaded is that this> function insert a minimum date when date < minimum date and a maximum> date when date > maximum date.>> Yes i know you're thinking : This is datamanipulation and yes this is> true. But now we loose information in our cubes and reports by inner> joining. So if we can use a minimum and a maximum than a user would> say: "This is strange, a lot of values on 1980/1/1!" instead of "I> think that i have not all the data!">> Greetz>> Hennie[/color]Plaats een reactie op dit berichtBericht 3 van deze discussieVan:Hugo Kornelis (hugo@pe_NO_rFact.in_SPAM_fo)Onderwerp:Re: Intensively used function in view needs a minimum andmaximum from a tableView this article onlyDiscussies:comp.databases.ms-sqlserverDatum:2004-12-30 15:32:06 PSTOn 30 Dec 2004 02:38:51 -0800, Hennie de Nooijer wrote:[color=blue]>I have a problem (who not?) with a function which i'm using in a[/color]view.[color=blue]>This function is a function which calculates a integer value of a>date. For example: '12/31/2004 00:00:00" becomes 20041231. This is>very handy in a datawarehouse and performes superfast. But here is my>problem.[/color](snip)Hi Hennie,Is this conversion all that your function does? If so, you might wanttotry the following alternative (using CURRENT_TIMESTAMP as example;replaceit with your date column / parameter):SELECT CAST(CONVERT(varchar, CURRENT_TIMESTAMP, 112) AS int)You could put this in the UDF (probably at least as fast as yourcurrentCalenmdar-table based function), or use it inline as a replacement tothefunction call (probably even faster).It should work for all dates from Jan 1st 1753 through Dec 31st 9999.Best, Hugo--(Remove _NO_ and _SPAM_ to get my e-mail address)
View 2 Replies View RelatedI have a report that has 14 user supplied parameters. When I added a 15th parameter and deployed the report, I get an error of Maximum Request Length Exceeded when I try to set up a subscription to the report. All of the subscriptions on the report are failing now and users are getting rather upset.
Please help! How do I get rid of the Maximum Request Length Exceeded error?
Thanks!
My team at work has spent the past week troubleshooting performance issues experienced by users of our asp.net 2.x web application. We've got a probe running on one of the web servers that has identified a frequently occuring error that no one has seen before and I can't find anywhere online. MSSQL error "system.data.oledb.oledbcommand.executenonquery(Maximum number of unique SQL exceeded) Has anyone here ever seen this error before?The web server, application, SQL servers and databases all seem to be configured properly, but users are experiencing latency and this frequently occurring error is a mystery to us.
View 3 Replies View RelatedIs there any way of configuring this parameter?
A work around?
Or have I reached the limits of scalablilty on this issue?
Please assist me
Thanks
Hello, I received an error while attempting to create a table similar to the following...
CREATE TABLE ExampleTable (
[FIELD_0] [int] IDENTITY(1,1) NOT NULL,
[FIELD_1] [nvarchar](255) NULL,
[FIELD_2] [nvarchar](255) NULL,
[FIELD_3] [nvarchar](255) NULL,
[FIELD_4] [datetime] NULL,
[FIELD_5] [nvarchar](255) NULL,
[FIELD_6] [nvarchar](255) NULL,
[FIELD_7] [nvarchar](255) NULL,
[FIELD_8] [nvarchar](255) NULL,
[FIELD_9] [nvarchar](255) NULL,
[FIELD_10] [nvarchar](255) NULL,
[FIELD_11] [nvarchar](255) NULL,
[FIELD_12] [nvarchar](255) NULL,
[FIELD_13] [nvarchar](255) NULL,
[FIELD_14] [nvarchar](255) NULL,
[FIELD_15] [nvarchar](255) NULL,
[FIELD_16] [nvarchar](255) NULL,
[FIELD_17] [nvarchar](255) NULL,
[FIELD_18] [nvarchar](255) NULL,
[FIELD_19] [nvarchar](255) NULL,
[FIELD_20] [nvarchar](255) NULL,
[FIELD_21] [nvarchar](255) NULL,
[FIELD_22] [nvarchar](255) NULL,
[FIELD_23] [nvarchar](255) NULL,
[FIELD_24] [nvarchar](255) NULL,
[FIELD_25] [nvarchar](255) NULL,
[FIELD_26] [nvarchar](255) NULL,
[FIELD_27] [nvarchar](255) NULL
)
First of all, field names have been changed to protect the innocent. Second, I did *not* create this table...I'm troubleshooting issues with a previously created table. I've no idea why almost every field needs to be an NVARCHAR data type of that size. Finally, as you can probably guess, I'm getting this error on a SQL Server 2000 database. (Yeah, it's past time we upgraded to SQL Server 2005 at least...explain that to management, please. I suggest you speak slowly and use small words.)
Anyhow, the error is "Warning: The table 'ExampleTable' has been created but its maximum row size (13348) exceeds the maximum number of bytes per row (8060). INSERT or UPDATE of a row in this table will fail if the resulting row length exceeds 8060 bytes."
Am I misunderstanding how the row size is calculated? How is SQL Server getting 13,348 bytes from the above statement?
Any and all constructive suggestions/ideas are much appreciated! Thanks!
I have a SQL2000 enterprise edition with sp3 clustered.
I am creating backup jobs via t-sql for around 680 databases. From MMC sqlAgent jobs, found all jobs (every DB has 7 jobs(M-Sun) are created. But some of (around 20% of the 680*7= 4760 jobs) in the Next Run Date column with value of "(Date and Time are not available". It means these jobs might be skipped to run.
If I right click the job and choose "start", then the job Next Run Date will be the corrent datetime. But when I rerun the t-sql to recreate jobs for these 20%, I get the
[The maximum number of pending SQLServerAgent notifications has been exceeded. The notification will be ignored.]
Is there a way to around it?
thanks
-D
I am new to SQL but have managed to create a table with five columns. The problem I am having is when I try and run the INSERT command I get an error "Maximum characters exceeded in SQL statement"
My table code is:
create table myemployees_MPA0510
(FirstName Varchar (15), LastName
varchar (20), Title varchar (25),
Age number (3), salary number (9));
And my INSERT code is:
Insert into myemployees_MPA0510
(First, Last, Title, Age, Salary)
Values ('Jonie', 'Weber', 'Secretary', 28, 19500.00) ('Potsy', 'Webber', 'Programmer', 32,
45300.00) ('Dirk', 'Smith', 'Programmer II', 45 75020.00) ('Mark', 'Aldridge' 'Technical', 52,
12000.00) ('Peter', 'Wright' 'Admin' 30, 11000.00) ('Lucy', 'May', 'Technical', 15500.00)
('Robert', 'Hurst', 'Finance', 54, 16000.00) ('Ann', 'Green', 'HR', 43, 21000.00);
HelloI am running a DTS (Sql 2000) and transfering data from an SqlServerdatabase to an Ingres database.I am transfering 153k rows.Execution fails with the error message:"The number of failing rows exceeded the maximum specified"The number of rows shouldn't be a problem because in another DTS I copya lot more rows.Also the width of the row shouldn't be a problem, I'm transfering only 3int4 fields and 1 char(5) field.Anyone have an idea what the problem could be ?ThanksDavid Greenberg
View 1 Replies View Related HiAm Using ASP.NET With SQL SERVER 2005 Backend
AGENT CODE
3008000003
NAME
agent code dropdownlist values like 1005000006,2009000002,3008000003select dropdownlist value it display corresponding values related to that codewhen i select first 2 values its run properly,But when i select 3008000003 i will get following error messagein SQL SERVER 2005 Agent Code Date Type is "bigint"" The conversion of the nvarchar value '3008000003' overflowed an int
column. Maximum integer value exceeded. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: The conversion of the nvarchar value
'3008000003' overflowed an int column. Maximum integer value
exceeded.Source Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the
exception can be identified using the exception stack trace below.
Stack Trace: Please Help me to solve this issueThanks With RegardsS.Senthil Nathan
I have a situation where I have Table A, Table B.
View C is created by joining table A and table B.
I have written a instead of trigger D on view C.
I do not insert/update/delete on the view directly.
For every insert/update in table A /B the values should get insert/update in the view respectively. This insert/update on view should invoke the trigger.
And I am unable to see this trigger work on the view if any insert/update occurs on base table level.
Trigger is working only if any operation is done directly on the view.
Warning: 0x80019002 at STAGING: The Execution method succeeded, but the number of errors raised (14) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
i got this error in my ssis package, where i'm trying to export flat file data into oledb destination,
can anyone help me to fix this issue!!!
What i've done?
1. Data Flow Task
a. po.txt flat file Source
b. Derived column
c. Oledb destination
a. pend.txt Flat file Source
b. Derived column
c. Oledb destination
a. invoice.txt Flat file Source
b. Derived column
c. Oledb destination
i did three flows in a single data flow task; among that one flow is running (po.txt flow) the rest are returned with Red Box filled error, and i capture the error and pasted there!!
the full error message is...... what i got in my output window is follows
i need some guidence to solve this issue, please let me know if you know about this stuff.
Information: 0x40016041 at STAGING: The package is attempting to configure from the XML file "staging.dtsConfig".
Warning: 0x80012014 at STAGING: The configuration file "staging.dtsConfig" cannot be found. Check the directory and file name.
Warning: 0x80012059 at STAGING: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed.
SSIS package "STAGING.dtsx" starting.
Information: 0x4004300A at Staging Table Loading Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Warning: 0x80047076 at Staging Table Loading Data Flow Task, DTS.Pipeline: The output column "Description" (3223) on output "Flat File Source Output" (3161) and component "Invoice Raised Flat File Source" (3160) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at Staging Table Loading Data Flow Task, DTS.Pipeline: The output column "Project Number" (3080) on output "Flat File Source Output" (3063) and component "Pending Files Flat File Source" (3062) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x4004300A at Staging Table Loading Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Warning: 0x80047076 at Staging Table Loading Data Flow Task, DTS.Pipeline: The output column "Description" (3223) on output "Flat File Source Output" (3161) and component "Invoice Raised Flat File Source" (3160) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at Staging Table Loading Data Flow Task, DTS.Pipeline: The output column "Project Number" (3080) on output "Flat File Source Output" (3063) and component "Pending Files Flat File Source" (3062) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x40043006 at Staging Table Loading Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Staging Table Loading Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Staging Table Loading Data Flow Task, PO Pending Flat File Source [2344]: The processing of file "C:Documents and Settingse402076Desktopitss flat filespo_pending.txt" has started.
Information: 0x402090DC at Staging Table Loading Data Flow Task, Pending Files Flat File Source [3062]: The processing of file "C:Documents and Settingse402076Desktopitss flat filespending bills.txt" has started.
Information: 0x402090DC at Staging Table Loading Data Flow Task, Invoice Raised Flat File Source [3160]: The processing of file "C:Documents and Settingse402076Desktopitss flat filesinvoices_raised.txt" has started.
Information: 0x4004300C at Staging Table Loading Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC02020A1 at Staging Table Loading Data Flow Task, Invoice Raised Flat File Source [3160]: Data conversion failed. The data conversion for column "Description" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
Error: 0xC02020A1 at Staging Table Loading Data Flow Task, Pending Files Flat File Source [3062]: Data conversion failed. The data conversion for column "Event Description" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
Information: 0x402090DE at Staging Table Loading Data Flow Task, PO Pending Flat File Source [2344]: The total number of data rows processed for file "C:Documents and Settingse402076Desktopitss flat filespo_pending.txt" is 76.
Error: 0xC020902A at Staging Table Loading Data Flow Task, Pending Files Flat File Source [3062]: The "output column "Event Description" (3095)" failed because truncation occurred, and the truncation row disposition on "output column "Event Description" (3095)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Error: 0xC020902A at Staging Table Loading Data Flow Task, Invoice Raised Flat File Source [3160]: The "output column "Description" (3223)" failed because truncation occurred, and the truncation row disposition on "output column "Description" (3223)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Error: 0xC0202092 at Staging Table Loading Data Flow Task, Pending Files Flat File Source [3062]: An error occurred while processing file "C:Documents and Settingse402076Desktopitss flat filespending bills.txt" on data row 10.
Error: 0xC0202092 at Staging Table Loading Data Flow Task, Invoice Raised Flat File Source [3160]: An error occurred while processing file "C:Documents and Settingse402076Desktopitss flat filesinvoices_raised.txt" on data row 5.
Error: 0xC0047038 at Staging Table Loading Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "Pending Files Flat File Source" (3062) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047038 at Staging Table Loading Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "Invoice Raised Flat File Source" (3160) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Staging Table Loading Data Flow Task, DTS.Pipeline: Thread "SourceThread2" has exited with error code 0xC0047038.
Error: 0xC0047039 at Staging Table Loading Data Flow Task, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Staging Table Loading Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
Error: 0xC0047021 at Staging Table Loading Data Flow Task, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Error: 0xC0047039 at Staging Table Loading Data Flow Task, DTS.Pipeline: Thread "WorkThread2" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Staging Table Loading Data Flow Task, DTS.Pipeline: Thread "WorkThread2" has exited with error code 0xC0047039.
Information: 0x402090DF at Staging Table Loading Data Flow Task, PO_PENDING_STG OLE DB Destination [587]: The final commit for the data insertion has started.
Information: 0x402090E0 at Staging Table Loading Data Flow Task, PO_PENDING_STG OLE DB Destination [587]: The final commit for the data insertion has ended.
Information: 0x40043008 at Staging Table Loading Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DF at Staging Table Loading Data Flow Task, INVOICE_STG OLE DB Destination [247]: The final commit for the data insertion has started.
Information: 0x402090E0 at Staging Table Loading Data Flow Task, INVOICE_STG OLE DB Destination [247]: The final commit for the data insertion has ended.
Information: 0x402090DF at Staging Table Loading Data Flow Task, OLE DB Destination [933]: The final commit for the data insertion has started.
Information: 0x402090E0 at Staging Table Loading Data Flow Task, OLE DB Destination [933]: The final commit for the data insertion has ended.
Information: 0x402090DD at Staging Table Loading Data Flow Task, PO Pending Flat File Source [2344]: The processing of file "C:Documents and Settingse402076Desktopitss flat filespo_pending.txt" has ended.
Information: 0x402090DD at Staging Table Loading Data Flow Task, Pending Files Flat File Source [3062]: The processing of file "C:Documents and Settingse402076Desktopitss flat filespending bills.txt" has ended.
Information: 0x402090DD at Staging Table Loading Data Flow Task, Invoice Raised Flat File Source [3160]: The processing of file "C:Documents and Settingse402076Desktopitss flat filesinvoices_raised.txt" has ended.
Information: 0x40043009 at Staging Table Loading Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Staging Table Loading Data Flow Task, DTS.Pipeline: "component "PO_PENDING_STG OLE DB Destination" (587)" wrote 75 rows.
Information: 0x4004300B at Staging Table Loading Data Flow Task, DTS.Pipeline: "component "OLE DB Destination" (933)" wrote 0 rows.
Information: 0x4004300B at Staging Table Loading Data Flow Task, DTS.Pipeline: "component "INVOICE_STG OLE DB Destination" (247)" wrote 0 rows.
Task failed: Staging Table Loading Data Flow Task
Warning: 0x80019002 at STAGING: The Execution method succeeded, but the number of errors raised (14) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "STAGING.dtsx" finished: Failure.
The program '[2532] STAGING.dtsx: DTS' has exited with code 0 (0x0).
I am trying to deploy a shape file map of the world with 100 random data points from my dataset but get this error: "exception running the extensions specified in the config file. ---> Maximum request length exceeded". I can preview this fine in SSDT. I have read various solutions which involve editing the config file but I don't have permissions to get to these files. Is there any way to amend the maximum length either through SSMS or SSDT? If not how can I make my map size small enough to deploy? It is a very simple shape file with no colours etc and I am passing random 100 data points to it from my dataset.
View 4 Replies View Related
I have created a local user on Report Server Computer and the user has the administrative rights.
When i try to connect Report Server (http://xxx.xxx.xxx.xxx/reportserver) with this user's credantials. (ReportServer directory security is set -only- to Basic Authentication. ).
I get the following error.
Reporting Services Error
--------------------------------------------------------------------------------
The number of requests for "XXXServerXXXUser" has exceeded the maximum number allowed for a single user.
--------------------------------------------------------------------------------
SQL Server Reporting Services
Then i try to login using a different user with administrative rights on the machine, i can logon successfully.
The system is up for a month but this problem occured today?!? What could be the problem?!?
Here is something that perhaps a lot of you out there wonder about..
My company is on a large Enterprise Project.
The database plans for this to be fully supported predict 1000+ stored procedures.
Question:
Will there be any limitation for an SQL Server 2000 to handle so many stored procs?
and if there is a limitation what will we have to do in order to work around it?
Hello all.
First of all, I've been a reader of swynk.com for quite sometime now, and I'd like to say 'thank you' to everyone who contributes.
Today, I'm the town moron.. haha I'm having issues with column level constraints. I have a varchar(50) where I want to keep *,=,#,/, .. etc, OUT OF the value input. I don't want to strip them. I simply want for sql to throw an error if the insert contains those (and other characters). The only characters that I want in the column are A-Z and 0-9. However, it's not a set number of characters per insert. It always varies... There has to be an easier way to do this than creating a constraint for every possibilty... Any help would be greatly appreciated.
tia,
Jeremy
We have been running SQL Server 7 for the past 6 months, with no problems at all. All of a sudden, we have received the error message 17050, that the maximum limit for connections has been reached. We cannot now start Enterprise Manager or do anything. We have tried fiddling with licencing in control panel but to no avail. Does anyone have any idea why this has suddenly happened? Any tips would be great!
Cheers.
Hi,I have a .NET application that I want to save the Config.EXE contentsto my SQL database for remote review/testing. This config file is3700+ bytes long. I created a field in one of my tables with a VARCHAR4800 and then created a stored procedure that receives a parameter(also VARCHAR(4800).However it fails to write anything if the length of the value that Ipass is anything greater than 900. If I pass exactly 900 characters orless - the data is written to the field. If I pass 901 characters Iget nothing.I'm suspicious since it is exactly 900. I seriously doubt it's somelimitation of MS-SQL so I need a nudge in the right direction.Thanks
View 8 Replies View RelatedHi guys 'n gals,
I created a query, which makes use of a temp table, and I need the results to be displayed in a View. Unfortunately, Views do not support temp tables, as far as I know, so I put my code in a stored procedure, with the hope I could call it from a View....
I tried:
CREATE VIEW [qryMyView]
AS
EXEC pr_MyProc
and unfortunately, it does not let this run.
Anybody able to help me out please?
Cheers!
Hi
I've implemented an SQL-CLR stored procedure which makes an HTTP connection using the WebClient class to a server where the processing on the web server takes 10 seconds.
If I fire off a bunch of requests to the stored procedure, e.g. 80 in 1 second I noticed that SQL Server 2005 (Express Edition) only allows 2 concurrent network connections at a time.
I can confirm this by looking at the timing of the results when they come back, basically I get 2 results every 10 seconds and by doing a 'netstat -a' on the web server I notice that there are never more than 2 HTTP connections from the SQL Server at a time.
Is this some sort of sheduling policy in terms of the number of concurrent external network accesses allowed by CLR objects running in SQL Server? Or some side effect of the way the WebClient class blocks in terms of waiting for a network response?
I was expecting all 80 of the requests to block waiting on a network response almost immediately and then for all 80 of them to pretty much complete and return 10-11 seconds later.
[Microsoft.SqlServer.Server.SqlProcedure]
public static int CreditAuthorisation(string Name, decimal Amount)
{
WebClient client = new WebClient();
string result = client.DownloadString("http://someserver/Test.aspx");
return int.Parse(result);
}
Cheers
In my ASP page, when I select an option from the drop down list, it has to get the records from the database stored procedure. There are around 60,000 records to be fetched. It throws an exception when I select this option. I think the application times out due to the large number of records. Could some tell me how to limit the number of rows to be returned to avoid this problem. Thanks.
Query
SELECT @SQLTier1Select = 'SELECT * FROM dbo.UDV_Tier1Accounts WHERE CUSTOMER IN (SELECT CUSTOMERNUMBER FROM dbo.UDF_GetUsersCustomers(' + CAST(@UserID AS VARCHAR(4)) + '))' + @Criteria + ' AND (number IN (SELECT DISTINCT ph1.number FROM Collect2000.dbo.payhistory ph1 LEFT JOIN Collect2000.dbo.payhistory ph2 ON ph1.UID = ph2.ReverseOfUID WHERE (((ph1.batchtype = ''PU'') OR (ph1.batchtype = ''PC'')) AND ph2.ReverseOfUID IS NULL)) OR code IN (SELECT DISTINCT StatusID FROM tbl_APR_Statuses WHERE SearchCategoryPaidPaymentsT1 = 1))'
I'm a developer, not a DB admin. I'm writing a .NET app that usescrystal reports.The table I need to output is built inside a stored procedure. Nochoice, it makes use of some temporary tables. (Believe me I've triedto get around that.)Crystal reports seems to only know about tables and views. It lookslike a view cannot call procedures. It can call functions, but in turnthey also can't call procedures. I am hosed, what now?Performance is not a factor here, small data sets, I just gotta get thething working.
View 5 Replies View Related
Hi guys, is there any way to solve my problem as title ? Assuming my stored proc is written as below :
CREATE PROC TEST
@A VARCHAR(8000) = '1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,...,5000'
AS
BEGIN
DECLARE @B nvarchar(MAX);
SET @B = 'SELECT * FROM C WHERE ID IN ( ' + @A + ')'
EXECUTE sp_executesql @B
END
GO
I have no problem getting OLE DB Command transformations to support single returns by a procedure.
For example, exec name_of_procedure ?,?,? OUTPUT
However, I have a stored procedure which accepts 1 input and returns 5 outputs. This procedure works fine at the command line but when I try to incorporate it into a OLE DB Command I don't get the multiple values returned. There's no problem at all configuring the transform as it recognizes all input and output parameters. For some reason I just don't get values returned.
thanks
John
Hi All,
I have read the various posts regarding the thread abort issue.
I have a stored proc (CLR-C#) which makes and ldap call to a novell NDS tree and attempts to pull about 40k+ records which I would then insert into a sql server database.
I have set up all the requrements in terms of clr enabled etc...
I have written my class and I can run the sp when I limit the records returned. However when I go to grab all the records, (which takes some time), the sp craps out with the error message in the title of this post.
The assembly is running under unsafe permissions.
If I run the sp once, it works, then again and I may or may not get an 6522 (memory error). I added the search parameter to break down the records returned (so I return a's then b's etc...) . BTW: This works fine ouside SQL Server, I can run this as an ASP.Net app (I prototyped it with a test harness aspx page).
Basically what the class does is
connect to novel nds directorypull records based on search criteria (blank for all)dump records into datatableserialize datatable to xmlcall another sp to take xml and insert into tabledisconnect from treeAny comments/suggestions apreciated.
Thanks,
Stephen
Here is the class (editied to protect privacy):
using System;
using System.IO;
using System.Text;
using System.Collections.Generic;
using System.Data;
using System.Data.SqlTypes;
using System.Data.SqlClient;
using Microsoft.SqlServer.Server;
using Novell.Directory.Ldap;
namespace EDSPullInSQLStoreProc
{
public class EDSPROC
{
[Microsoft.SqlServer.Server.SqlProcedure]
public static void EDSPull(bool IsProd, bool IsSecure, string searchParam)
{
//variable declarations
string __LADPHost_DEV = "xx.xx.xx.xx";
string __LADPHost_PROD = "xx.xx.xx.xx";
int __LADPPort_NonSecure = xxx;
int __LADPPort_Secure = xxx;
int __LDAPPort;
string __LDAPUserDN_DEV = "some string";
string __LDAPUserDN_PROD = "somestring";
string __LDAPUserDNPwd_DEV = "apassword";
string __LDAPUserDNPwd_PROD = "apassword";
LdapConnection oLDAPConn;
DataTable oDTEDSData = new DataTable("EDSUSER");
string strErrResponseMsg = "";
SqlPipe oSQLPipe = SqlContext.Pipe;
//connect to eds
try
{
oLDAPConn = new LdapConnection();
if (IsSecure)
{
oLDAPConn.SecureSocketLayer = true;
__LDAPPort = __LADPPort_Secure;
}
else
{
oLDAPConn.SecureSocketLayer = false;
__LDAPPort = __LADPPort_NonSecure;
}
if (IsProd)
{
oLDAPConn.Connect(__LADPHost_PROD, __LDAPPort);
oLDAPConn.Bind(__LDAPUserDN_PROD, __LDAPUserDNPwd_PROD);
}
else
{
oLDAPConn.Connect(__LADPHost_DEV, __LDAPPort);
oLDAPConn.Bind(__LDAPUserDN_DEV, __LDAPUserDNPwd_DEV);
}
}
catch (LdapException ldapEx)
{
oSQLPipe.Send("Error connecting to EDS: " + ldapEx.LdapErrorMessage.ToString());
return;
}
if (oLDAPConn != null)
{
oDTEDSData.Columns.Add("LastName");
...a bunch more columns
DataRow oRow;
//make the ldap query filling the datatable
LdapSearchConstraints oEDSSearchConstriants = new LdapSearchConstraints();
oEDSSearchConstriants.MaxResults = 0;
LdapSearchResults oEDSSearchResults = oLDAPConn.Search("somestring", LdapConnection.SCOPE_ONE, "cn=" + searchParam + "*", null, false, oEDSSearchConstriants);
LdapEntry oEDSEntry;
LdapAttribute oEDSAttrib;
while (oEDSSearchResults.hasMore())
{
try
{
oEDSEntry = oEDSSearchResults.next();
}
catch (LdapException e)
{
oSQLPipe.Send("EDS Pull error: Obtaining next record - " + e.LdapErrorMessage.ToString());
try
{
oLDAPConn.Disconnect();
}
catch
{
oLDAPConn = null;
}
return;
}
oRow = oDTEDSData.NewRow();
oEDSAttrib = oEDSEntry.getAttribute("sn");
if (oEDSAttrib != null)
{
oRow["LastName"] = oEDSAttrib.StringValue;
}
else
{
oRow["LastName"] = "";
}
...get more attributes etc
}//end while
if (oDTEDSData.Rows.Count > 0)
{
try
{
TextWriter oWriter = new StringWriter();
oDTEDSData.WriteXml(oWriter);
string strXML = oWriter.ToString();
strXML = strXML.Replace("'", "''");
using (SqlConnection oConn = new SqlConnection("context connection=true"))
{
oConn.Open();
SqlCommand oCmd = new SqlCommand("exec proc_BulkInsertEDSUsers '" + strXML + "','" + searchParam + "'", oConn);
oCmd.ExecuteNonQuery();
oSQLPipe.Send("EDS Pull complete.");
}
}
catch (Exception ex)
{
oSQLPipe.Send("An error has occurred. " + ex.Message.ToString() + "" + ex.InnerException.Message.ToString());
try
{
oLDAPConn.Disconnect();
}
catch
{
oLDAPConn = null;
}
return;
}
}
//close the ldap connection
try
{
oLDAPConn.Disconnect();
}
catch
{
oLDAPConn = null;
}
}
}
}
}