Membership And Report Server Access... Help!!
Feb 9, 2006
I have a problem that I'm hoping someone can give me some advice with: I have created a website that uses .Net 2.0, SQL 2005, and ASP.NET Membership to manage users. Everything works fine until it comes to calling reports, in particular setting report parameters:
Exception Details: Microsoft.Reporting.WebForms.ReportServerException: The permissions granted to user 'NT AUTHORITYNETWORK SERVICE' are insufficient for performing this operation. (rsAccessDenied)
Source Error:
Line 30: End If
Line 31:
Line 32: Me.rvInvoice.ServerReport.SetParameters(p)
Line 33: Me.rvInvoice.Visible = True
Line 34:
The report worked fine before the security model was changed to use the Membership classes which leads me to conclude that I have not configured the Report Server to deal with the network account that the ASP pages are now using.
I have looked at the example project for configuring extensions with no success. Any help would be greatly appreciated.
Thanks,
Mike
View 1 Replies
ADVERTISEMENT
Jun 16, 2006
SQL server 2005 express reporting problem.
error message:
This feature "remote access to report data sources and/or the report server database" is not supported in this edition of reporting service
I got this error message when I try to connect to database hosted in another PC running SQL server 2000.
Is it true that SQlL server Express can only use Local Database Engine to host the database?
View 5 Replies
View Related
Aug 1, 2007
Hello,
I'm trying to create a web page that is protected by a user login. I want the user data to be stored in an access database file and not an SQL Server express database.
I was following this guide on msdn:
http://msdn2.microsoft.com/en-us/library/879kf95c(VS.80).aspx
However, I was doing everything locally using a file system and not IIS. (Which seemed to work fine)
My main problem is that I cannot get the membership information stored in an access database. The only provider option was one for the SQL server express. I think I will have to make a custom provider? However, I read through some of that documentation and was equally confused. ( http://msdn2.microsoft.com/en-us/library/Aa479031.aspx )
Anyone have a solution?
View 7 Replies
View Related
May 25, 2007
Hi every one,
I'm very new new at this. I'm try to deploy a report model and got this message. I have no idea what its going on about.
Can anyone help me?
Aku
------------------------------
System.Web.Services.Protocols.SoapException: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) ---> Microsoft.ReportingServices.Diagnostics.Utilities.RPCException: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) ---> System.Exception: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) ---> System.Exception: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) ---> System.Exception: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) ---> System.Exception: The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled) ---> System.Exception: Bad Data. (Exception from HRESULT: 0x80090005)
--- End of inner exception stack trace ---
--- End of inner exception stack trace ---
--- End of inner exception stack trace ---
--- End of inner exception stack trace ---
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.Diagnostics.DataProtection.ProtectData(Byte[] unprotectedData, String tag)
at Microsoft.ReportingServices.Library.ConnectionManager.ConnectStorage()
at Microsoft.ReportingServices.Library.Storage.NewStandardSqlCommand(String storedProcedureName)
at Microsoft.ReportingServices.Library.DBInterface.GetAllConfigurationInfo()
at Microsoft.ReportingServices.Library.RSService.GetSystemProperties(Property[] requestedProperties)
at Microsoft.ReportingServices.WebServer.ReportingService.GetSystemProperties(Property[] Properties, Property[]& Values)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WebServer.ReportingService.GetSystemProperties(Property[] Properties, Property[]& Values) (System.Web.Services)
------------------------------
BUTTONS:
OK
------------------------------
View 38 Replies
View Related
Apr 24, 2006
I'm using SQL Express with Advance Services & I get this error when I try to deploy my reports. Why do I get this error
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'EDPSYS'. (rsErrorOpeningConnection)
The feature: "Remote access to report data sources and/or the report server database" is not supported in this edition of Reporting Services. (rsOperationNotSupported)
Justin Song
View 4 Replies
View Related
May 7, 2008
In my site, when a user registers, I need to create rows in additional tables besides aspnet_Users. So, I need to be able to pass the generated userId guid to subsequent SqlCommands. I'm having a terrible time with this. What's the correct way to set up a SqlParameter so that it will accept a guid? I keep getting this error: "Conversion failed when converting from a character string to uniqueidentifier."
I've tried creating the parameter both with and without a SqlDbType.
cmd.Parameters.AddWithValue(paramName, guid);
and
SqlParameter p = new SqlParameter(paramName);p.SqlDbType = SqlDbType.Guid;cmd.Parameters.Add(p);
and I get the same error either way.
Driving me nuts! Any help appreciated.
View 1 Replies
View Related
Apr 15, 2008
Hi,
I created a report in another project and it is loading through the web server. Now I want to access that report through a
web project that is using the reportviewer control. Now how do I setup the reportviewer to access that existing report on web server? I don't think you would have to have the report actually added to the web project do you? When I hit this page no report comes up.
Here is MicroSofts ReportViewer Control defined in my web form:
Code Snippet
<rsweb:ReportViewer ID="ReportViewer1" runat="server" Height="540px"
Width="742px">
<ServerReport DisplayName="Employees" ReportPath="/Reports1/Employees"
ReportServerUrl="http://localhost/ReportServer$SQLExpress" />
</rsweb:ReportViewer>
What am I doing wrong?
Thanks,
J
View 1 Replies
View Related
May 9, 2006
Hello,I'm programming asp.net 2.0 with a mySql database.Now I want to implement membership-features.I consider converting mySql to SQL server 2000 because then I don't have to build a custom membershipprovider.my question is: does membership work as good on sqlserver2000 as it does on sqlserver2005? (my host doesn't support sqlserver2005 (yet).another question: can I expect problems converting the database from mysql to sqlserver2000?
View 1 Replies
View Related
Feb 19, 2006
Hello all,I need help with sql server which i was wondering if someone can shedsome light on my problemThe problem:Hello all,I need help with sql server which i was wondering if someone can shedsome light on my problemThe problem:i am using .net 2.0 membership provider interface to provide amembership in my website...now i also am using the sql server 2005 forthe backbone of the site..now when a new user is created theirinformation is saved into asp_ membership and their userid isautomactially saved into another table called asp_users...now these aredefaults by membership provider...what i would like to do is to createanother table which i have called "Rank" and i would a column in this"rank" table that would keep the user ids, now i have noticed that theasp_user.UserId has a releationship with asp_Membership.userId so when anew user is created asp_user.Userid automactially gets updated..i havecreated a colum called Rank.UserId which has a relationship withasp_users.userid and asp_membershi.Userid but it doesnot get updatedautomatically when a new user is created...what can i do so i can havethis table "Rank" also gets updated automactially as soon a a new useris created or a user has been deleted...just like asp_users gets updated...thanks in advance---Best RegardsAmir---Best RegardsAmir*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies
View Related
Mar 26, 2008
Hi,
When i try to Access my report server i am getting a error
The website declined to show ( its a 403 forbidden error)..
But if i give Http://Localhost/reports it works
What should i do to solve it..
Regards,
Karen
View 5 Replies
View Related
Oct 4, 2006
Hi Guys,
After installing SQL Server 2005 Reporting Services, I got the following errors:
1. When I tried to open http://localhost/reports/ , I got the following error message
The report server is not responding. Verify that the report server is running and can be accessed from this computer.
2. When I tried to open http://localhost/reportserver/ , I got the following error message
The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
Access to the path 'C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServerRSReportServer.config' is denied.
Is there any clue for this technical problem?
Immediate response is appreciated.
--Amde
View 7 Replies
View Related
Mar 8, 2008
Ive finally gotten my report server setup to run. I can access the reports via IIS from a remote computer if I login as the server administrator. Ive given certain users permissions to the /Program Files/sql server/Reporting Services/ folder, however, when I try to enter their login info, from the IIS login prompt when i visit http://servername/ReportServer/ I am unable to login. How do I grant users permission to login to report server?
thanks
View 1 Replies
View Related
Jan 17, 2007
Hi, I hope this is in the correct category. I have two .mdf files. aspnetdb.mdf and emotiveonline.mdf. My host provider can only give me one database in sql server express 2005. Now I am no genius when it comes to programming and that kind of stuff but those two mdf files would be seen as 2 databases right? What I would like to know is that if I can but everything into one mdf file and how would i go about doing that. My website is almost finished and just thought about this now. Would like to do the changes as soon as possible so that I won't sit with a humongous problem later on. Thank you in advance. Kind regards,Ruan Rossouw
View 2 Replies
View Related
Mar 8, 2008
Hi, I'm a beginner on SQL Server Reporting Services field. I perform a full installation of SQL Server 2008 CTP6 Developer Editon on a clean Windows Server 2008 Enterprise machine. I log on to the machine using the built-in Administrator account so there is no UAC stuff. The Enhanced Security Configuration of IE is disabled. When I want to have a look at the Report Manager by typing http://localhost/Reports, it pops up an error says "The underlying connection was closed. Could not establish trust relationship for the SSL/TLS secure channel." It makes me confused so any help or suggestion is highly appreciated.
The following is a fraction of log file from Reporting Services:
...
ReportingServicesService!resourceutilities!b5c!03/08/2008-14:25:57:: i INFO: Reporting Services starting SKU: Developer
ReportingServicesService!resourceutilities!b5c!03/08/2008-14:25:57:: i INFO: Evaluation copy: 165 days left
ReportingServicesService!appdomainmanager!4e4!03/08/2008-14:28:15:: i INFO: Appdomain:3 ReportManager_0-1-128494312954554272 started.
ReportingServicesService!appdomainmanager!4e4!03/08/2008-14:28:18:: i INFO: RS authentication mode is 5; effective ASP.NET authentication mode is Windows. vdir=/Reports.
ReportingServicesService!appdomainmanager!4e4!03/08/2008-14:28:18:: i INFO: Appdomain:3 ReportManager_0-1-128494312954554272 initialized (#1).
ReportingServicesService!appdomainmanager!e10!03/08/2008-14:28:26:: e ERROR: Remote certificate error
RemoteCertificateNameMismatch encountered for url https://localhost/ReportServer/ReportService2005.asmx.
ReportingServicesService!ui!e10!03/08/2008-14:28:27:: e ERROR: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
ReportingServicesService!ui!e10!03/08/2008-14:28:27:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure. at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception) at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest)
...
View 4 Replies
View Related
Jun 29, 2007
Can someone provide me some hints or useful links on user access throguh a report server? Here is the situation:
MachineA: (My Machine) running Windows XP professional with full SQL Server 2005 installed
MachineB: running Windows 2003 Server with full SQL Server 2005 installed
MachineC: a user machine running Windows XP professional .
All the machines are connected within the same LAN.
I created a report - on MachineA with a data source called 'DataSource1' that points to an analysis database located in MachineB. I deployed the report to the reporting service on MachineA. I have no problem to view the report on my web browser on MachineA through http://localhost/reportserver. Now I let a user to view the report on on MachineC through http://MachineA/reportserver. She can see my report. However, when she clicks the report, she got the following error:
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'DataSource1'. (rsErrorOpeningConnection)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
I tried many ways to fix the problem, and got no solution. She sees my report so she can access my report server. She has enough access right to the analysis database and cubes and dimensions. She can use her Management Studio to connect to it and browse the cube. She just can not open 'DataSource1'. I would really appreciate if someone can share some knowledge or recommend me some useful resources that explains the access/security control via Web Service -> Report Server -> Analysis Cubes. There are so many places to configure the access/security: IIS, Report Manager (Roles), the OLTP server that hosts Report Server databases (ReportServer and ReportServerTempDB), and the Analysis database (also called roles). I really get confused: how do they work together?
Thanks a lot.
View 3 Replies
View Related
Dec 14, 2006
I'm trying to conncet to Report Server with Non-Administrator user through WMI in compliance with this document: http://msdn2.microsoft.com/en-us/library/ms365170.aspx
When I try to get Instances from MSReportServer_Instance class I get an exception:
In my C# project i have an exception:
System.Runtime.InteropServices.COMException (0x8000000A) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
But, when I give the account Domain Administrators rights all works ok.
What additional rights must I give to the account?
View 4 Replies
View Related
Feb 11, 2007
I've been unsuccessful getting Reporting Services 2005 to work after reinstalling SQL 2005. The RS service cannot connect to its database, as reported in the Event Log. If I visit http://localhost/Reports, I get the error "Key not valid for use in specified state. (Exception from HRESULT: 0x8009000B)
(rsRPCError)"
I've used the RS Config Mgr to create a fresh database for it named SSRS (and SSRSTembDB), and it is set to use Service Credentials in the db connection. The RS service is running using the same admin account as MSSQL, .SQLExec. I have confirmed that .SQLExec is in the RSExecRole role in the SSRS database.
When I created the SSRS database, the Config Mgr had a green check for every step except the last. For "Setting Connection Info for the Reporting Server" there was a yellow '!', with the explanation, "Although saving the database connection succeeded, the report server cannot access internal information about this deployment to determine if the current configuration is valid for this edition. ..."
I examined rsreportserver.config to look for any issues. The <dsn> element has an encrypted string, the <ConnectionType> element says "Default", and the logon elements are empty. I could not find the db names, SSRS and SSRSTempDB, anywhere in the file. Where are these kept? I don't know what else to look for.
Also, in RS Config Mgr, the 'Encryption Keys' page has a blue '!', and only the 'Restore' and 'Delete' buttons are enabled. The 'Initialization' page has a red 'X'. The local RS is not listed (the grid is empty), and clicking the 'Initialize' button does nothing.
How can I diagnose and fix this installation?
View 5 Replies
View Related
Dec 14, 2007
when my ASP.NET 2.0 web site working against MS SQL Server 2000,I Usually have a connection string to the DB, I create a connection, and start working on the data.
While reading about the MemberShip provider of ASP.NET 2.0 (Login control, Forgot password, etc.),I read that it's possible to save the MDF file of the membership controls, within the APP_DATA folder.
But how can it be ? the MDF file must be at the server folder,How can I access this MDF file ? with which connection string ?How does MS SQL Server 2000 syncronize against this MDF file within my APP_DATA folder ?
And by the way, if my hosting company allow me to use 1 db schema of the MS SQL Server 2000 server,Does this method (saving the MDF file within thr APP_DATA folder) allow me to use multiple schemas ?
Thanks.
View 4 Replies
View Related
Feb 11, 2008
I receive the following error when i call report server web service from an asp.net application:
"The request failed with HTTP status 401: Unauthorized."
Here are the IIS logs on the reporting services server. When i open IE and browse to the web service i provide my user credentials and i can access the web service just fine. However when i call the web service via my asp.net application it looks like my credentials are not being passed??
Browsing web services via internet explorer.
2008-02-11 21:26:13 W3SVC1836052065 HQSQLDEV1 10.69.21.140 GET /Reports/images/16fold.gif - 8080 triwestdbloom 10.69.21.140 HTTP/1.1 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+WOW64;+SV1;+.NET+CLR+2.0.50727;+.NET+CLR+1.1.4322) 10.69.21.140:8080 200 0 0 15
Call from ASP.NET App
2008-02-11 21:26:13 W3SVC1836052065 HQSQLDEV1 10.69.21.140 GET /Reports/images/16fold.gif - 8080 - 10.69.21.140 HTTP/1.1 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+WOW64;+SV1;+.NET+CLR+2.0.50727;+.NET+CLR+1.1.4322) 10.69.21.140:8080 401 1 0 0
Here is my code:
RSWebService.ReportingService rs = new RSWebService.ReportingService();
rs.Credentials = new System.Net.NetworkCredential(@"triwestdbloom",
"blah", "triwest");
//rs.PreAuthenticate = true;
//Get all folders
RSWebService.CatalogItem[] allItems = rs.ListChildren("/", false);
//Get only folders not hidden to the user.
List<RSWebService.CatalogItem> visibleItems = new List<RSWebService.CatalogItem>();
foreach (RSWebService.CatalogItem item in allItems)
{
Response.Write(item.Name.ToString());
}
Any ideas?
View 2 Replies
View Related
Jul 4, 2007
hello, I have developed a website using asp.net 2.0 and sql server 2005 express edition. I have used the built-in membership, roles and login controls in my website. now i need to change the database server. i have to use sql server 2000 instead. as asp.net 2.0 uses the ASPNETDB.mdf for member,roles and login controls, so how can i do it? i can easily export the database from 2005 to 2000 but how my application controls will know where to look at for those data. I am clueless. please help me. thanks in advance.
View 2 Replies
View Related
Feb 22, 2006
How can I implementing Membership and Role Management on SQL Server 2005 (not Express)? Anyone have any documentation? Are there any scripts to run that will basically set up the same Database schema on SQL Server 2005 that Express uses?
Thanks.
View 3 Replies
View Related
Jul 23, 2005
I just changed my Access 2002 database to a SQL Server ADP project. Ihad a form where the user entered a value into a text box and when acommand button on the form was clicked a Report was opened. The reportsrecord source is a query. The query uses the value from the form textbox to restrict the query.Table name = EggsTableone of the columns in the table is named: EggColorForm name = EggColorFormForm text box name = ColorTextBoxThis sql worked for the query before I converted to SQL:SELECT EggsTable.EggColorFROM EggsTableWHERE (((EggsTable.EggColor)=[Forms]![EggColorForm]![ColorTextBox]));This no longer works. Can I change the syntax somehow to get this towork? I tried dropping the brackets around the word "Forms", I trieddropping all the square brackets, etc., nothing worked.I also tried just opening the report with the report's Server Filterproperty set to:EggColor=N'Forms.EggColorForm.ColorTextBox'I tried using the Report's open event to pass the form value directlyto the report. I tried setting a variable from the text box value onthe form. So far, nothing works. Any ideas?
View 7 Replies
View Related
Dec 20, 2007
what is MS's strategy for having two off the shelf ways of getting at reports? In a typical company, is the average non administrator type user getting at his reports via one, the other, both?
View 1 Replies
View Related
May 14, 2008
I've set up a report server on IIS on my local machine using SSRS 2005. All is well in the world--it shows up, and I can publish reports and have them display successfully.
However, I'm trying to publish a couple of reports based on an Access database--and this is where the problem lies. The reports run perfectly in Visual Studio, which is on the same machine as the report server. Thus, I can deduce that the ODBC connection to the Access database is set up properly. There are no errors on the report, which means that the reports are set up correctly. I've spent the last day researching the problem, but nothing I've tried thus far (from putting the Access database in a shared folder to changing security on the file and report server to rebuilding the reports from scratch) works. The exact error is given below, with the data source name changed:
An error has occurred during report processing.
Cannot create a connection to data source 'MyODBCDataSource.
ERROR [HY024] [Microsoft][ODBC Microsoft Access Driver] '(unknown)' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides. ERROR [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed ERROR [HY024] [Microsoft][ODBC Microsoft Access Driver] '(unknown)' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.
Can anyone suggest something I missed? I'm stumped on this one.
Edit: Just to clarify, EVERYTHING is on my local machine--the web browser I'm viewing from, IIS, SSRS 2005, the Access database, the ODBC connection (in the System DSN), everything.
View 3 Replies
View Related
Mar 4, 2008
Hello,
SQL Server Reporting Services 2005 (SSRS) is installed on Vista Ultimate.
I cannot access to the http://localhost/ReportServer page. IE posts an internal error HTTP 500.0 (after IE required a Windows account).
All the configurations of Reporting Services are OK. In the Log file, there is nothing: the Web Services does not seem to be launched.
By continuing the investigations in IIS 7 (activation of the €śRules of follow-up of the requests having failed€?, I found the error following:
IIS Trace Detail Highlights
No. EventName Details Time
53. MODULE_SET_RESPONSE_ERROR_STATUS Warning
ModuleName="IsapiModule", Notification="EXECUTE_REQUEST_HANDLER", HttpStatus="500", HttpReason="Internal Server Error", HttpSubStatus="0", ErrorCode="Syntaxe du nom de fichier, de répertoire ou de volume incorrecte. (0x8007007b)", ConfigExceptionInfo="" 09:02:33.716
Translation of the french sentence: ErrorCode="Incorrect syntax of the file name, the directory or the volume."
I made a full research on Internet and in the documentation at my disposal and I did not find anything which can advance me towards a beginning of solution€¦
Thank you with all for the assistance which you will be able to bring to me.
View 4 Replies
View Related
Sep 10, 2015
Is there any way to get more information for when IAuthorizationExtension::CheckAccess fails to grant access to a report item for the current user? Specifically, it would be useful to know:
1. URL of attempted report
2. IP address of user agent
3. Identity of current user
4. Date/Time of the failed attempt
ssrs2014
View 7 Replies
View Related
Feb 24, 2015
My sa account can not see the tables in the db. but can connect to the server
View 2 Replies
View Related
Apr 14, 2008
I need to prevent domain and local administrators from having full control over our report manager. (I want them to be assigned permissions just like everyone else, some reports they can see other reports they can not.)
How can I accomplish this? I tried going into Report Manager -> Site Settings -> Configure Site Wide Security and re-assigning BUILTINAdministrators to the System User role instead of the System Administrator role. (A different set of report manager admins was given the system administrator role).
However, it appears that members of the BUILTINAdministrators group still have full control in Report Manager.
View 3 Replies
View Related
Apr 17, 2008
Hello,
I'm using Reporting Services to render a text (stored in sql as varchar(max)). The text is all plain text, with some lines having trailing spaces.
Source text file i've imported to SQL via SSIS:
CLIENT: 10055
STATEMENT 2007
DATE:1002993
THIS IS THE OTHER STATEMENT
COLUMN1 COLUMN2 COLUMN 3
TRY THIS
*Note the trailing spaces on the line before 'STATEMENT 2007'.
I've designed a report using the Report Project in VS2005 to retrieve this text via a stored procedure. When I test the report using the 'Preview' tab in the IDE, it looks good
CLIENT: 10055
STATEMENT 2007
DATE:1002993
THIS IS THE OTHER STATEMENT
COLUMN1 COLUMN2 COLUMN 3
TRY THIS
But when I deploy the report and run it using URL Access:
CLIENT: 10055
STATEMENT 2007
DATE:1002993
THIS IS THE OTHER STATEMENT
COLUMN1 COLUMN2 COLUMN 3
TRY THIS
On all lines with trailing spaces, they (the trailing spaces) have been removed. This is affecting my formatting of some reports and statements. We really want to use the report viewer as it has built in paging, print and export capabilities.
Why does it look okay in VS2005 but different in Report Viewer via URL Access and Report Manager?
Note: When I export as PDF, it looks okay.
The stored procedure I use to return the data is a CLR Hosted assembly as below:
Code Snippet
Partial Public Class StoredProcedures
<Microsoft.SqlServer.Server.SqlProcedure()> _
Public Shared Sub GetPagedDocument(ByVal inText As SqlString)
Dim dr As SqlDataReader
Dim row As New SqlDataRecord(New SqlMetaData("RowText", SqlDbType.Text))
Dim cmd As New SqlCommand("select cast(doc as varchar(max)) as 'DOCTEXT' from testdoc WHERE id='" + inText + "'")
Dim cn As New SqlConnection("context connection=true")
cn.Open()
cmd.Connection = cn
SqlContext.Pipe.SendResultsStart(row) 'initialise the resultset to be returned
dr = cmd.ExecuteReader
'If no records in result set, return.
If Not dr.HasRows Then
row.SetString(0, "There is no document to display or you do not have permission to view the document.")
SqlContext.Pipe.SendResultsRow(row)
SqlContext.Pipe.SendResultsEnd()
' SqlContext.Pipe.Send("There is no document to display.")
Return
End If
'Read rows in the result set
dr.Read()
'Get the entire text
Dim docText As String = dr.Item("DOCTEXT")
'debug
row.SetString(0, docText)
SqlContext.Pipe.SendResultsRow(row)
SqlContext.Pipe.SendResultsEnd()
Return
'end debug
End Sub
End Class
Any help will be appreciated.
View 3 Replies
View Related
Nov 22, 2006
I am setting up the SQL2005 reporting service to let users build their own reports on the web. I'll provide them with pre-built report models. We have concern with SQL database performance by allowing users to execute huge reports. The problem that I have is: If I give the users permissions to build report they'll have access to the report's Properties | Execution page, which allows them to disable the report execution timeout. Is there a way for me to allow them build reports while restrict them to access the report execution timeout settings?
Please advise. Many thanks.
View 1 Replies
View Related
Nov 12, 2007
I have search all around the net, trying to get a solution for my application under MS Access 2003, I developed a database that generates a report, this report will need to be accessed trough the internal network, perhaps we don't want any user to have direct access to the database itself, and also we don't want to have to manually posted the report in the shared folder, we want to set up this to be done automatically and the end user won't need to have MS access in their pc, perhaps exporting the report as an spreadsheet instead. I try by using Macros within Access but this will only work manually from the .mdb file.
I also check what options do I have if I use Javascript but I don't think it will work either, since I'm not using Crystal Reports.
Can you please provide me with some guidance, if this is actually possible from a database/report under MS Access 2003.
Thank you in advance,
View 1 Replies
View Related
Aug 7, 2007
Hi,I would have used the aspnet membership tool to auto-create all the ASP.NET membership tables. However, the hosting company don't allow remote connections which meant I had to create the tables by hand, scripting the tables using script to CREATE using management studio.However, I noticed one of the tables has data without any users: aspnet_SchemaVersions, which causes an error when trying to log onto my site.The fix is to make sure the table has the 4-5 rows of data in it (which is missing off the live server). Its just a few rows of data, but I want to script the inserts for each row so I don't have to type them in using myLittleAdmin (the host's web version of management studio). Can anyone point me in the right direction?
View 3 Replies
View Related
Jan 28, 2008
Hi,
I have report that in access 97. When i run that report every morning, it's update technician time, mileage and money. I want that report to be update every min like real time report in sql reporting service. can u tell how i can do that?
Thanks.
View 2 Replies
View Related