Dear Friends
I have SSIS package When I run it SQL Server memory Shoots Very Much
How To check and Solve this problem When I queried In the same package as sp it does not take that much memory
please help me how to control SQL Memory shoot.
I am running Visual Studio 2005. I have an SSIS Package which is consuming a huge amount of memory. During the execution of the package the memory keeps increasing. Until finally i get an Out of Memory exception. I have run this package using dtexec, and in the BIDS. No difference. I do have some script components and have added some code to get the assemblies in the current appdomain. I do see that one particular assembly is increasing on every loop. VBAssembly every time it hits the script component is increasing by 6, and along with it the memory is climbing. What is this VBAssembly being used for is there an update to SQL Server Integration Services that I need?
Thanks! Aaron B.
I have an SSIS Package that loads data from a log file. Prior to loading the data I need to prepare the file. I run a script that cleans the file. Then I import the flat file into SQL Server.
Log File Management Task
1. Run Unix Log File Task
2. Import the new log file (flat file) into SQL Server
Error
i.Unix.dtsx
Message: The script threw an exception: Exception of type 'System.OutOfMemoryException' was thrown.
Is this because the system is running out of memory? The RAM on the server is 4gb. Below is a sample of the script. The job doesn't always fail; there are times when the job executes with success and other times when it fails.
Script Source Code
-----------------------------------------------------------
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports System.Collections.Generic
Imports System.IO
Imports System.Text
Imports System.Diagnostics
Imports System.Globalization
Imports Microsoft.VisualBasic
Imports System.Text.RegularExpressions
Public Class ScriptMain
'********** Begin Error Log Settings **********
'Dim sSource As String = "i.SSIS.Unix.FileManager"
'Dim sLog As String = "Application"
'Dim sMachine As String = "."
'Dim ELog As New EventLog(sLog, sMachine, sSource)
'********** End Error Log Settings **********
Public Sub Main()
'variables for the unix log file
Dim newFile As String = "D:iLogunixlog.txt"
Dim copyFile As String = "\server16iLogunixlog.txt"
'variables for working log files
Dim oldFile As String = "D:i empunixlog.txt"
Dim difFile As String = "D:i empunixdiff.txt"
Dim trimdiff As String = "D:i empunixdifft.txt"
Dim formatTemp As String = "D:i empunixlog_formatted.txt"
Dim errorFile As String = "D:i empunixlog_bad.txt"
'delete unixlog.txt copy unixlog.txt
'if the file is on the local server delete it and copy the new file over
'if the file is not present copy the new file over
Try
If File.Exists(newFile) Then
File.Delete(newFile)
File.Copy(copyFile, newFile)
Else
File.Copy(copyFile, newFile)
End If
While Not File.Exists(newFile)
System.Threading.Thread.Sleep(1000)
End While
'ELog.WriteEntry("FileCopy.Success".ToString(), EventLogEntryType.SuccessAudit, 4, CType(4, Short))
Catch ex As Exception
'ELog.WriteEntry("FileCopy.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 2, CType(4, Short))
End Try
'open the old file; read backwards until we reach the carriage
'return and store that "seek" position; now open the new file and
'seek to that stored position. finally, read the rest of the file
'and write that data to the difference file.
' determine position of last line in the old file
Dim lastLine As Long = GetLastLinePosition(oldFile)
' get all data in new file starting at position determined above
Dim fi As New FileInfo(newFile)
Dim buffer(fi.Length - lastLine) As Byte
Dim fs As New FileStream(newFile, FileMode.Open)
Try
fs.Seek(lastLine, SeekOrigin.Begin)
fs.Read(buffer, 0, buffer.Length)
fs.Close()
' write that new data to the difference file
fs = New FileStream(difFile, FileMode.OpenOrCreate, FileAccess.Write, FileShare.None)
fs.Write(buffer, 0, buffer.Length)
fs.Close()
'ELog.WriteEntry("FileCopy.Success".ToString(), EventLogEntryType.SuccessAudit, 4, CType(4, Short))
Catch ex As Exception
'ELog.WriteEntry("FileCopy.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 2, CType(4, Short))
End Try
'remove the partial row from the difference file
Try
TrimFinal(difFile, trimdiff)
'ELog.WriteEntry("TrimFinal.Call.Success".ToString(), EventLogEntryType.SuccessAudit, 4, CType(4, Short))
Catch ex As Exception
'ELog.WriteEntry("TrimFinal.Call.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 2, CType(4, Short))
End Try
'perform the file formatting
sFormatFile(trimdiff, formatTemp, errorFile)
'
Dts.TaskResult = Dts.Results.Success
End Sub
Function GetLastLinePosition(ByVal fileName As String) As Long
Dim pos As Long = -1
Dim fs As New FileStream(fileName, FileMode.Open, FileAccess.Read, FileShare.ReadWrite)
Try
fs.Seek(-2, SeekOrigin.End) ' -2 to skip a potential vbcrlf at the end of file
While fs.Position > 0
fs.Seek(-1, SeekOrigin.Current)
If fs.ReadByte = 10 Then
pos = fs.Position
Exit While
Else
fs.Seek(-1, SeekOrigin.Current)
End If
End While
fs.Close()
'ELog.WriteEntry("GetLastLinePosition.Success".ToString(), EventLogEntryType.SuccessAudit, 4, CType(4, Short))
Catch ex As Exception
'ELog.WriteEntry("GetLastLinePosition.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 2, CType(4, Short))
End Try
Return pos
End Function
Sub TrimFinal(ByVal difFile As String, ByVal trimdiff As String)
Dim fi2 As New FileStream(difFile, FileMode.OpenOrCreate, FileAccess.Read)
Dim fo2 As New FileStream(trimdiff, FileMode.OpenOrCreate, FileAccess.Write)
Dim sr2 As New StreamReader(fi2)
Dim sw2 As New StreamWriter(fo2)
Dim line2 As String
Try
Do While sr2.Peek <> -1
line2 = sr2.ReadLine()
If (sr2.Peek <> -1) Then
sw2.WriteLine(line2)
End If
Loop
sw2.Flush() : sw2.Close()
sr2.Close()
fi2.Close() : fo2.Close()
'ELog.WriteEntry("TrimFinal.Success".ToString(), EventLogEntryType.SuccessAudit, 4, CType(4, Short))
Catch ex As Exception
'ELog.WriteEntry("TrimFinal.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 2, CType(4, Short))
End Try
End Sub
Sub sFormatFile(ByVal currentFile As String, ByVal tempFile As String, ByVal errorFile As String)
Dim tfp As New Microsoft.VisualBasic.FileIO.TextFieldParser(currentFile)
Dim sw As New System.IO.StreamWriter(tempFile)
Dim swErrorFile As New System.IO.StreamWriter(errorFile)
tfp.TextFieldType = FileIO.FieldType.Delimited
tfp.SetDelimiters(",")
tfp.HasFieldsEnclosedInQuotes = True
tfp.TrimWhiteSpace = True
Dim fields() As String
Try
While Not tfp.EndOfData
Try
fields = tfp.ReadFields()
If fields.Length <> 23 Then
'write bad rows to error-file
swErrorFile.WriteLine(String.Join(",", fields))
Else
If fields(3) = "" And fields(13) = "" Then
sw.WriteLine(Chr(34) & String.Join(Chr(34) & "," & Chr(34), fields) & Chr(34))
ElseIf IsDate(fields(3)) = True OrElse fields(3) = Format(CDate(fields(3)), "yyyy-MM-dd HH:mms") And fields(13) = "" Then
sw.WriteLine(Chr(34) & String.Join(Chr(34) & "," & Chr(34), fields) & Chr(34))
ElseIf IsDate(fields(13)) = True OrElse fields(13) = Format(CDate(fields(13)), "yyyy-MM-dd HH:mms") And fields(3) = "" Then
sw.WriteLine(Chr(34) & String.Join(Chr(34) & "," & Chr(34), fields) & Chr(34))
ElseIf IsDate(fields(3)) = True OrElse fields(3) = Format(CDate(fields(3)), "yyyy-MM-dd HH:mms") _
And IsDate(fields(13)) = True OrElse fields(13) = Format(CDate(fields(13)), "yyyy-MM-dd HH:mms") Then
sw.WriteLine(Chr(34) & String.Join(Chr(34) & "," & Chr(34), fields) & Chr(34))
Else
swErrorFile.WriteLine(String.Join(",", fields))
End If
End If
Catch ex As Exception
'ELog.WriteEntry("sFormatFile.TFP.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 0, CType(4, Short))
End Try
End While
tfp.Close()
sw.Close()
swErrorFile.Close()
File.Delete(currentFile)
File.Move(tempFile, currentFile)
'ELog.WriteEntry("sFormatFile.Success".ToString(), EventLogEntryType.SuccessAudit, 0, CType(4, Short))
Catch ex As Exception
'ELog.WriteEntry("sFormatFile.Failure" & ControlChars.CrLf & ex.ToString(), EventLogEntryType.Error, 0, CType(4, Short))
Finally
GC.Collect()
End Try
End Sub
End Class
-------------------------
Does my script seem okay for releasing the server memory usage?
Thanks.
I see following error when I execute a SSIS package as part of a job from within SQL Server
OnInformation,006-CIS-SQL,apdsvcPM2SQL,VistaMain,{F902B487-D543-4F31-AC80-EF088CD0CBA4},{74325B35-DC59-4B51-AE8E-756BCC879633},10/18/2007 6:15:12 AM,10/18/2007 6:15:12 AM,1074036748,0x,The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 4 buffers were considered and 4 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
SQL Server has 6 GB memory allocated to it. How can I best troubleshoot this issue?
Hi,
when i am trying to execute package in ssis then given below errors comes many times.how to fix it.any body can ......
in ssis default buffer size 10 mb.
soure is iseries-db2 on as400 in production server ,
and destination is db2 udb on windows in dev server.
usersapce page size in db2 is 16-32k
4 gb ram support in server with 2003 server standard edition.
errors are---
Information: 0x4004800D at CHDRPF 312-315, DTS.Pipeline: The buffer manager failed a memory allocation call for 15728400 bytes, but was unable to swap out any buffers to relieve memory pressure. 3 buffers were considered and 3 were locked. Either not enough memory is available to the pipeline because not enough are installed, other processes were using it, or too many buffers are locked.
Error: 0xC0047012 at CHDRPF 312-315, DTS.Pipeline: A buffer failed while allocating 15728400 bytes.
Error: 0xC0047011 at CHDRPF 312-315, DTS.Pipeline: The system reports 83 percent memory load. There are 3488509952 bytes of physical memory with 558743552 bytes free. There are 2147352576 bytes of virtual memory with 222920704 bytes free. The paging file has 7416537088 bytes with 3703283712 bytes free.
Error: 0xC0047056 at CHDRPF 312-315, DTS.Pipeline: The Data Flow task failed to create a buffer to call PrimeOutput for output "DataReader Source" (15437) on component "DataReader Output" (15442). This error usually occurs due to an out-of-memory condition.
Error: 0xC0047021 at CHDRPF 312-315, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0x8007000E.
Error: 0xC0047039 at CHDRPF 312-315, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CHDRPF 312-315, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
so what need to do for fix that problem ......
i have a nightly job (SSIS Package) scheduled using MS. The package loads data from the OLTP db to the warehouse. The server has 256GB memory and out of which 211GB is free.
the job runs w/o any problems but some times it fails with the following error"DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "The statement has been terminated.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Violation of PRIMARY KEY constraint '<var>PrimaryKeyName</var>'. Cannot insert duplicate key in object '<var>TableName</var>'.".
When i researched this error i found out that its because of the memory issue. we have 222GB free memory and how come this is possible. Is there a way in the package or anywhere else where i can specify how much (percentage) of the memory that the SSIS package should use (something like SSRS threshold levelp).
Visual Studio runs out of memory when trying to use SSIS package. I am trying to create and run a SSIS package that validates and imports some large xml files >200MB. Validation fails because Visual studio cannot open large files without running out of memory.
The SSIS package throws this error when I run the package..at the validation task.
Error: 0xC002F304 at Validate bio_fixed, XML Task: An error occurred with the following error message: "Exception of type 'System.OutOfMemoryException' was thrown.".
How do I increase the amount of RAM that VIsual Studio can use...I have plenty of RAM on my workstation >3GB, but VS chokes maybe around 100MB files?
Thanks,
Forrest
When attempting to save an SSIS package in Visual Studion I receive the following error message detailed below. If I attempt to "Save As" to another location, I then receive an insufficient storage error. The development machine has over 1.5 GB of available physical memory and several GB of disk space availabe to save my 16 MB package. I have checked the event log and have found no related messages in the Application or Server logs.
Any suggestions on how to determine the cause or resolution of this error message would be greatly appreciated.
Failure saving package. (Microsoft Visual Studio)
Insufficient memory to continue the execution of the program. (Microsoft.SqlServer.ManagedDTS)
Advanced Error Message Details
Failure saving package. (Microsoft Visual Studio)
------------------------------
Program Location:
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializePackage(IDesignerSerializationManager manager, Package package, TextWriter textWriter)
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializeComponent(IDesignerSerializationManager manager, IComponent component, Object serializationStream)
at Microsoft.DataWarehouse.Serialization.DesignerComponentSerializer.Serialize(IDesignerSerializationManager manager, Object value)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseDesignerLoader.Serialize()
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush(Boolean forceful)
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.BaseDesignerLoader.Flush()
at Microsoft.DataWarehouse.VsIntegration.Designer.Serialization.DataWarehouseContainerManager.OnBeforeSave(UInt32 docCookie)
===================================
Insufficient memory to continue the execution of the program. (Microsoft.SqlServer.ManagedDTS)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Package.SaveToXML(String& packageXml, IDTSEvents events)
at Microsoft.DataTransformationServices.Design.Serialization.DtrDesignerSerializer.SerializePackage(IDesignerSerializationManager manager, Package package, TextWriter textWriter)
Hello, I understand that we should use SSMS -> Server Properties -> Memory to put a cap on the SQL server memory usage, therefore it gives some space memory for OS, this is based on the fact if the max memory is not specified, SQL will use whatever available memory and eventually crash the system.
My question is that when a server has SSIS and SSAS services installed along with the SQL service. Would the max memory setting covers the SSIS and SSAS memory usage, or the SSIS and SSAS has to shared the memory with OS?
Thanks,
fshguo.
Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
Thank you
Tej
Hi,
In our project we have two SSIS package.
And there is a task (Execute SSIS package) in First package that calls the execution of second package.
I m continuously receiving an error "Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available."
As we are running first package by job, job runs successfully logging above error
The protection level of second package is set to "EncryptSensitiveWithUserKey"
Can anybody please suggest how to handle it?
Hi,
I know the SSIS memory problem has probably been covered quite a bit, but being a newbie in using the SSIS, I'm not quite sure how to improved the performance of my SSIS package.
Basically, I've a package that loops through all the subdirectories within a specified directory, and it then loops through each file in the subdirectory and with the use of the Data Flow, process each file (according to their filenames) with a Script Component to insert data into a SQL DB.
Each subdirectory has up to 15 different csv files, but each is less than 5kB. I probably have about 100 subdirectories.
When I run the package, it functioned properly, but the package stalled (no error but just stuck in one Data Flow) after a while, and when I checked my CPU memory, it was running at 100%.
I'm not sure how I could fix it or improved the memory allocation. I was not expecting to have any memory problems as the file size is small and the number of rows of data going into and out of the Script Component is no more than 20.
Any advice? Thanks.
Hi..
I'm running a package that has a XML Task in the control flow. This task tranforms a XML file with a XSLT.
The file is about 2 megs on a daily basis, but at the end of the month there is a full dump of data that makes the file to be around 400 megs. There is where my problem is.
I run this on my 2 GB memory workstation and when the memory gauge on the task manager reaches about 1.5gb the package fails with an "Out of memory exception".
I also run this package on a 8GB Ram server, and same applies.
Is there any way of making this package utilize all the available memory, I even increased the virtual memory to see if that helped my issue, but nothing.
Thanks
When I compile or save a SSiS package in the SQL Server Business Intelligence Development Studio I get the error
Failure saving package. (Microsoft Visual Studio)
Insufficient memory to continue the execution of the program.
Sometimes, if I wait longer time, the package can suddenly be saved.
I have 2 GB of RAM und over 15 GB of free space on my disk. Thus, there should be anough space to save the package.
What should I do to resolve this problem? It seems to be a bug.
To splitt the package would not be a solution.
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
Hi All,
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
Other times I get this error message:
.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)
And still other times
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
Does anyone have any other suggestions to try?
Thanks.
I would like to standardize SSIS development so that developers all start with the same basic template. I have set it up so it is an available template ( http://support.microsoft.com/kb/908018 ) but I would like it to be the default when a new project or package is created. Is this an option?
View 4 Replies View RelatedI would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
View 5 Replies View RelatedHi there
We have a SSIS run which runs as follows
The master package has a configuration file, specifying the connect strings
The master package passes these connect-strings to the child packages in a variable
Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s.
We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.
The package is run from the file system, through a job-schedule.
We experience the following when running on a not default sql-server instance (called dkms5253uedw)
Case 1:
The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.
The master package then executes the first child package. We then in the sysdtslog get:
Error - €œcannot connect to database xxx€?
Info - €œpackage is preparing to get connection string from parent €¦€?
The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.
Case 2:
When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.
Case 3:
When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.
Case 4:
When we then stop the sql-server on the default instance, the package faults again, this time with
Error - €œtimeout when connect to database xxx€?
Info - €œpackage is preparing to get connection string from parent €¦€?
And the continues as in the first case
From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).
We have tried delayed validation in the packages and in the connection managers, but with the same results (error).
So we are desperately hoping that someone can help us solve this problem.
Thanx,
/Nils M - Copenhagen
hi,
I am interested in Passing value from a child Package variable to the Parent package that calls it in ssis.
I am able to call the Child package using the execute package task and use Configurations to pass values from the parent variable to the child, but I am not able to pass the value from the child to the parent.
I have a variable called datasetId in both the parent and child. it gets computed in the child and needs to be passed to the parent...
Any suggestions?
Thanks for any help in advance..
smathew
Deployed Report having SSIS package as source do not work when Indirect Package configuration is used in ETL package. It seems ETL package when called/executed from Report manager does not recognize environment variable to pick up the dtsconfig file.
The Report works when Direct package configuration is used to same dtsconfig file.
What could be the reason? Any solution for this? This will cause our build/deployment to QA and Prod very difficult.
Dear All,
I now have two SSIS package, "TESTING" and "LOADING". The "TESTING" package have an execute package task that call the "LOADING" package. When I want to execute the TESTING package, how can I setup the connection string so that I can edit the password of the database connected by the "LOADING" package?
Regards,
Strike
If we have a SQL Server 2005 standard edition/Windows 2003 Standard Environment on a 32 bit 2 dual core proc Dell 2850 server, what is the maximum size of the memory we could possibly have?
Thank you,
Shiva
I have a WO-WO (no sorting, aggregating, etc.) SSIS package that reads ~26,000,000 rows from a SQL DataReader source, looks up a bunch of surrogate keys, derives a couple of values, and writes out to two SQL Server Destinations. The process gradually consumes all of the memory on the server, slowing it to a crawl. I reconfigured SQL Server to use a maximum of 8000 MB to mitigate the problem; however, the memory is not released unless I stop and restart SQL Server. Is this expected behavior for SSIS?
View 4 Replies View RelatedThe Execute method in Microsoft.SqlServer.Dts.RunTime.Package class has memory leak after each invokation. This following code demonstrates it.
Output from the program:
Allocated memory after 1 iteration(s) = 476316
Allocated memory after 2 iteration(s) = 546448
Allocated memory after 3 iteration(s) = 555008
Allocated memory after 4 iteration(s) = 563632
Allocated memory after 5 iteration(s) = 572232
Allocated memory after 6 iteration(s) = 580856
Allocated memory after 7 iteration(s) = 589480
Allocated memory after 8 iteration(s) = 598240
Allocated memory after 9 iteration(s) = 606816
Allocated memory after 10 iteration(s) = 615424
Allocated memory after 11 iteration(s) = 624000
Allocated memory after 12 iteration(s) = 632576
Allocated memory after 13 iteration(s) = 641152
Allocated memory after 14 iteration(s) = 649728
Allocated memory after 15 iteration(s) = 658352
Allocated memory after 16 iteration(s) = 666948
Allocated memory after 17 iteration(s) = 675760
Allocated memory after 18 iteration(s) = 684380
Allocated memory after 19 iteration(s) = 693008
Allocated memory after 20 iteration(s) = 701532
//-----------------------------------------------------------------------------
// The Execute method in Microsoft.SqlServer.Dts.RunTime.Package has memory
// leak. This program demonstrates it. The package invoked by this program has
// only a single 'Script Task' that does nothing.
//
// To compile, add referece to Microsoft.SQLServer.ManagedDTS.dll.
//
// csc /r:"C:Program FilesMicrosoft SQL Server90SDKAssembliesMicrosoft.SQLServer.ManagedDTS.dll" ExecPackage.cs
//
//-----------------------------------------------------------------------------
using System;
using System.Diagnostics;
using Microsoft.SqlServer.Dts.Runtime;
namespace Misc
{
/// <summary>
/// Programmatically executes SSIS package, then displays memeory usage
/// after each execution. The memeory usage goes up after each
/// Package.Execute() call, which indicates memory leak!
/// </summary>
static class ExecPackage
{
static void DisplayUsage()
{
Console.WriteLine(@"Usage: ExecPackage <pkgName>");
Console.WriteLine(@" Package <pkgName> resides in Package Store on localhost under File System");
}
static void Main(string[] args)
{
// Parse command line arguments.
if (args.Length != 1)
{
DisplayUsage();
return;
}
string pkgName = @"File System" + args[0];
// Programmatically execute the package several times.
Application app = new Application();
for (int i = 1; i <= 20; i++)
{
Package pkg = app.LoadFromDtsServer(pkgName, "localhost", null);
pkg.Execute(); // comment out this line, then allocated memory does not increase
// Process.Start("dtexec.exe", "/dts "" + pkgName + """);
pkg.Dispose();
pkg = null;
// Do garbage collection, then display memory usage
GC.Collect();
Console.WriteLine("Allocated memory after {0} iteration(s) = {1}",
i, GC.GetTotalMemory(true));
}
}
}
}
I have two SSIS packages in a project, one calling the other. The parent package works fine in my local mechine. After they are deployed to the production, I schedeul jobs to run the packages in the SqlServer. The child package works fine if I run it alone, but the parent package could not find its child package if I run the parent package . As I checked, all xml config files and the connection string pointing to the child package were set correctly. It seems the parent package did not use the xml config file. Can someone help me? Thanks in advance.
View 9 Replies View Related
I have successfully created a SSIS package which execute a DTS 2000 package and with no problem to execute the task. But I failed to schedule this package. I was not success in setting the logging. When running the package in command line:
dtexec file "C:Documents and SettingslyangMy DocumentsVisual Studio 2005ProjectsTraingDTSTraingDTSDTSTraining.dtsx"
Error: 2008-03-24 08:03:24.36
Code: 0xC0012024
Source: Execute DTS 2000 Package Task
Description: The task "Execute DTS 2000 Package Task" cannot run on this edit
ion of Integration Services. It requires a higher level edition.
End Error
Warning: 2008-03-24 08:03:24.38
Code: 0x80019002
Source: DTSTraining
Description: The Execution method succeeded, but the number of errors raised
(2) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the M
aximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Any help will be greatly appreciated.
(32 bit machine, standartd edition of SQL 2005)
Hi,
I am making use of the DtUtil tool to deploy my package to SQL Server.
Following is my configuration:
32-bit machine and 32-bit named instance of Yukon.
I have some package variables which need to be set in the code.
Previously I did it as follows:
Set the package variables in the code. For example:
pkgFile.Variables["User::DestinationServerName"].Value = <myvalue>
Deploy the package as follows:
applnObj.SaveToSqlServer(pkgFile, null,
destinationServer, null, null);
Here the package was successfully deployed and when i open those packages using BIDS, I am able to see that the variables are set to the values as doen in teh code.
Because of oen problem I am not using SaveToSQLServer method. So I switched to DTUtil tool.
Now I am doing it this way:
Set the package variables as before.
Deploy the package to SQL Server using DTUtil tool.
Now is the problem:
The package is successfully deployed. But the variables are not set to the value that I have specified in the code.
I also tried DTexec utility to set the package variable. Even that does n't work.
Can anyone help me out? Is there any alternate method to set package variables?
Thanks,
Sandhya
Hi!
I am currently encountering an error of testing an SSIS package in the server.
The package runs fine on my laptop, but not in the server.
I appreciate it for any of your input, comments, and suggestions.
The package is to populate records (150k rows) from a DB2 table and insert them into
another DB2 table (12,754,715 rows).
The server,
Windows Server 2003 Enterprise
SQL server 2005 sp1
8 CPUs
6 GB RAM
Native OLE DBIBM OLE DB Provider for DB2
My laptop,
Windows 2000 Professional
SQL server 2005 sp1
2 CPUs
2 GB RAM
Native OLE DBIBM OLE DB Provider for DB2
It fails on the insertion part (see the error message at the bottom). I have been playing with "DefaultBufferMaxRows" and "DefaultBufferSize" properties, but still no luck so far.
For the testing purpose, I even only select 2 rows from the source table, but it still fails with the same error message. And strangely, it still takes a very long time to process (for just two rows). In my laptop, it only takes few second to finish.
I have been really pulling my head to try to figure it out. Any of your help/input is highly appreciated! Thanks!
======================
Error Message
[POLICY [1683]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8007000E. An OLE DB record is available. Source: "Microsoft Cursor Engine" Hresult: 0x8007000E Description: "Out of memory.".
I've been working on serveral packages for the past hour and after finishing for the night I quickly wanted to check to see how much memory SQL Server was consuming on my laptop. It was using almost 500MB of memory. It typically hovers around 50-100MB when I'm not doing anything with it. Is this normal?
View 3 Replies View RelatedHi -
I am facing 2 problems :
PROBLEM 1 :
We have a few packages that run pretty fast on a desktop server with 2 Gig RAM, Dual processor (approx 4-5 hours). But the same packages run very very slow on the another server containing 8 CPU and 12 Gig RAM (ran for 24 hours without completing).
PROBLEM 2 :
The CPU% ranges from 40-80% and the PF usage is stagnant at 2GB on desktop server for the same package. But in the 8CPU server, the CPU % ranges from 0-10% but the PF Usage raises from 750 MB to 8 GB.
This has become critical to our application.
TIA,
Shabs
Hi,
I have a series of SSIS packages, all of which are ultimately executed by a parent package.
I'm consitently getting "OutOfMemory" errors when working with the packages which is temporarily solved by closing Visual Studio and re-opening the package(s)... This solution is short lived however as the OutOfMemory error occurs quite quickly after re-opening, often after doing nothing other than altering a variables default value and attempting to save the package.
The average size of the packages in question (.dtsx files) is around 7,000kb with the largest being 12,500kb. The total size of all the solution's packages is ~75,000kb.
The Processes tab in Task Manager shows a Mem Usage counter for devenv.exe *32 of around 20,000kb when Visual Studio is first opened however, when a single ~6,000kb dtsx file is opened this counter jumps to +300,000kb and when the entire solution is opened (When the parent package is executed), the Mem Usage counter for devenv.exe *32 is a massive +800,000kb!!!
Is this normal SSIS behaviour or do I have a major problem? Any tips or suggestions as to how to resolve this issue would be gratefully received.
FYI, "SELECT @@VERSION" gives me "Microsoft SQL Server 2005 - 9.00.3042.00 (X64) Feb 10 2007 00:59:02 Copyright (c) 1988-2005 Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2) "
My Server is Windows Server 2003 R2 Enterprise x64 SP2 with 8GB of RAM.
Thanks in advance.
Leigh.