Merge Replication - One Way Data Flow - Help Needed...
Apr 24, 2007
Hi,
We have configured one-way merge replication in our topology. That is data flows from Subscriber to Publisher only. We have a publisher and a subscriber. There are 3 publications in this category and each publication has a subscription. We use SQL Server 2005 SP1 in both the servers. The retention period is the 14 days (default). After this period, I get the following error in the subscription in Replication Monitor. The Error message is
Error messages:
The Merge Agent failed after detecting that retention-based metadata cleanup has deleted metadata at the Publisher for changes not yet sent to the Subscriber. You must reinitialize the subscription (without upload). (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147199402)
I read the post http://forums.microsoft.com/MSDN/ShowPost.aspxPostID=372790&SiteID=1
which said that this error might be solved in the SP2. We have not yet applied SP2, but even after applying SP2, will this error be solved for One Way Merge Replication since the data from publisher will not go to the subscriber always in this type of topology??.
Kindly get back to us regarding this as soon as possible. Thanks in advance.
Regards,
Swapna.B.
View 3 Replies
ADVERTISEMENT
Apr 25, 2007
Hi,
We have configured the following in the Publisher server..
1) Merge Replication - Synchronisation to be running in the continuous mode.
2) Merge Replication - Synchronisation in Scheduled mode.
The issue that we are facing here is the transaction log file of the databases which are in replication are growing very largely. And we get this error message in the Subscriber :
Error messages:
The Merge Agent failed to retrieve article information for publication 'MCC_Pos_CashlessPub'. Increase the -QueryTimeOut parameter and restart the synchronization. When troubleshooting, use SQL Profiler or restart the agent with a higher value for -HistoryVerboseLevel and check the output log file for errors. Correct any database engine conditions that may be causing internal replication stored procedures to fail. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147201017)
Get help: http://help/MSSQL_REPL-2147201017
The transaction log for database 'tempdb' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases (Source: MSSQLServer, Error number: 9002)
Get help: http://help/9002
In fact for the past two days there are no data movement or any changes to the table, still we are able to see the growth in the transaction log file.
As mentioned in the error description when checked the log_reuse_wait_desc column of the sys.databases table, it showed the value "LOG_BACKUP". So took database backup 3 times. and took transaction log backup 2 times from the subscriber server in which the error was thrown. Still the issue persists. There is no change in the transaction log size.
What is the reason behind the growth of LDF?? Is it because of Merge Replication Configured in the server??
Kindly check and let as know regarding this issue. We are facing lot of problems because of this issue. Thanks in advance.
Regards,
Swapna.B.
View 1 Replies
View Related
Sep 3, 2006
I have done a couple of little projects in VB express and was pleased with the results. Now I have something bigger in mind and need to know if VB express version of SQL will support merge replication. If not will the full version support it?
Thanks
Dave
View 3 Replies
View Related
Jul 29, 2006
Hi all,
We are using SQL Server 2005, on Windows server 2003 R2.
We Have Two Database Servers say DBServer1 and DBServer2, Now I wants to do Replication between these to servers, such that
1. The Changes at DBServer1 should be reflected at DBServer2
2. The Changes at DBServer2 should be reflected at DBServer1
3. Changes includes Data changes and Schema Changes
4. After every Synchronization Both Databases should be Identical
I tried doing so, what i did was
I cofigured Distribution at DBServer1, also Publisher and Publication at DBServer1
and Made a Subscription at DBServer2.
What I successfully done is
If Publisher means DBServer1 do some changes then it gets updated at DBServer2.
But New Rows added at DBServer2 doesn't gets added at DBServer1
Thanks in Advance,
Vishalgiri Goswami
Kalptaru Infosoft Pvt. Ltd.
View 4 Replies
View Related
Mar 1, 2006
Hi,
Does anyone know if it is possible to point data that underwent the "merge join" transformation (in one data flow) to the following data flow? I don't want to recreate all that merging, sorting and calling the same sources again in the following data flow if the data that I am using exists in the previous data flow. The merged data is simply too big to export to an excel file, so does anyone have any ideas? Thanks!
View 8 Replies
View Related
Apr 10, 2008
I have written following code in my application
I just want to display all the data of a Single table into a Data Grid, I know that we can drag and drop the table on to a form and datagrid is generated, but here I want to retrive those values through my code, how should i do that
I am getting following errors while running the program
Error 1) Error No. 28037, MS SQL Server 2005 Evrywhere Edition
Error: A request to send data to the computer running IIS has failed. For more information see HRESULT
Error 2) Error No. 0, SQL Server 2005 Evrywhere Edition ADO.Net Data Provider
Error: The specified table does not exist [ JobLists ].
Can anybody please tell me, where I went wrong ??? In this code anywhere else????
Note: While adding a Data Source of SQL Server 2005 Mobile Edition, I have added that .sdf file into my project, thats why I have written the Data Source as : .DbFile.sdf
@"Data Source = .DbDotNetCF.sdf";
The code is as follows:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
using System.Data.SqlServerCe;
namespace DeviceApplication1
{
public partial class Form1 : Form
{
string filename = @".DbDotNetCF.sdf";
private DataSet dsJobLists;
public Form1()
{
InitializeComponent();
}
private void DeleteDB()
{
if (System.IO.File.Exists(filename))
{
System.IO.File.Delete(filename);
}
}
private void Sync()
{
SqlCeReplication repl = new SqlCeReplication();
repl.InternetUrl = @"http://localhost/WebsiteDotNetCF/sqlcesa30.dll";
repl.Publisher = @"RAHU";
repl.PublisherDatabase = @"DotNetCF";
repl.PublisherSecurityMode = SecurityType.NTAuthentication;
repl.Publication = @"PubDotNetCF";
repl.Subscriber = @"SubDotNetCF";
repl.SubscriberConnectionString = @"Data Source='" + filename + "';Max Database Size=128;Default Lock Escalation =100;";
try
{
if (!System.IO.File.Exists(filename))
{
repl.AddSubscription(AddOption.CreateDatabase);
}
repl.Synchronize();
}
catch (SqlCeException ex)
{
DisplaySQLCEErrors(ex);
}
finally
{
repl.Dispose();
}
// Display Same Data In Another DataGrid : dataGrid1
SqlCeConnection cn = new SqlCeConnection(@"Data Source='" + filename + "'");
SqlCeDataAdapter daJobLists = new SqlCeDataAdapter("SELECT JobListsID, JobID, PersonID FROM JobLists", cn);
if (dsJobLists == null)
{
dsJobLists = new DataSet();
}
try
{
dsJobLists.Clear();
daJobLists.Fill(dsJobLists, "JobLists");
dataGrid1.DataSource = dsJobLists.Tables["JobLists"];
}
catch (SqlCeException ex)
{
DisplaySQLCEErrors(ex);
}
}
private void DisplaySQLCEErrors(SqlCeException ex)
{
for (int i = 0; i < ex.Errors.Count; i++)
{
MessageBox.Show("Index #" + i.ToString() + ""
+ ex.Errors.Source + ""
+ "Error: " + ex.Errors.Message,
"Error No. " + ex.Errors.NativeError.ToString());
}
}
private void Form1_Load(object sender, EventArgs e)
{
Sync();
DeleteDB();
if (DbDotNetCFDataSetUtil.DesignerUtil.IsRunTime())
{
// TODO: Delete this line of code to remove the default AutoFill for 'dbDotNetCFDataSet.JobLists'.
this.jobListsTableAdapter.Fill(this.dbDotNetCFDataSet.JobLists);
}
}
}
}
I have created a merge replication correctlly( I suppose, there were no errros)
Please help
Your help will be appriciated
View 1 Replies
View Related
Mar 28, 2008
thanks 4 ur rpl..well i have a simple doubt if u can guide me it will b gr8 help..well i am developing an application of location based services, in which i am going to store my data on SQLserver 2005 and will fetch the data from it when the user logs in to the user's PDA device so that a user can work offline on the data when there is no connection and when he gets the connection he can synchronize the data with SQLserver 2005. so now i m confuse whether i should use the merge replication or ado.net synchronization framework or RDA?what is the difference between merge replication and synchronization and which is better?
View 1 Replies
View Related
Jan 4, 2007
Dear ppl,
I have a question for you. One of our client has asked us how is the data secured over the air during Replication?
I have read that Merge Replication uses TLS (Transport Layer Security) protocol to secure the data over the air. But I was wondering if it is all done automatically ? Or do we need to install certificates like for SSL.
We have a Windows Mobile 5.0 application using SQL Mobile that runs over 50 devices and they all synchronise with a single Publisher SQL Server 2005 using GPRS connection. We haven't got any SSL certificates installed on the server.
Now how can i make use of TLS in my application to secure my data over the air (using TLS)?
Regards
Nabeel Farid
View 5 Replies
View Related
Apr 1, 2008
I am designing a mobile application.I am having database in sql server 2005 and i want to synchronize this database with sql server ce database on pda.I am using merge replication method for synchronization.Please give step by step procedure for data synchronization using merge replication between sql server 2005 and sql server ce 2.0,also let me know whether sql server enterprise manager is needed or will it work without it,if needed give me the link from where to download it as it is not available in sql server 2005.
Reply soon.
Thanks in advance.
View 1 Replies
View Related
Jun 27, 2006
We had merge replication setup between 2 tables, Table A and Table B using SQL 2000. This was working 100%. The users asked to disable updated/deletes to both these tables if data existed on 2 other tables. Table AA and Table BB. We implemented it as follows:
1) Created Insert/Update/Delete triggers for Table A & B. It basically check for Table A is there a record in Table AA, if it exists, raise an error and don€™t commit.
2) Removed all foreign constraints from Table AA and BB
3) Added Table AA and BB to the current replication.
Then all hell broke loose, we got conflicts all other the place saying that Table AA cannot be updated because records does not exist in Table X. To our surprise we found triggers generated by Erwin in 1998 €“ that check for €śforeign contsraints€? and removed them immediately.
We continued to get conflicts but could see from the error messages it was generated by the triggers in point 1. We added the NOT FOR REPLICATION clause and everything has been running smoothly or so we thought€¦..
After 2 months we got a call that data is missing. It€™s random data and the only explanation I have is that replication caused that. My biggest reason for saying this is tracking the application audit trail I€™ve found that all the data missing was added during the period we had all the conflicts.
I need a solid explanation for this and can anyone confirm that this is possible?
View 4 Replies
View Related
Feb 9, 2007
Hi gang,
We have a database that's using merge replication between two servers, and we need to insert a lot (about 1GB) of data into it.
The servers, however, are separated by a 192k WAN connection, so it's impractical to rely on the merge replication to send the data across to the subscriber.
Is there a way to insert the data at both ends? I can get the data out there on a DVD or a laptop easily enough. Can I load the data into both copies of the database and tell the merge agent that it's not to be replicated?
Thanks,
Matt
View 3 Replies
View Related
May 3, 2007
Hello,
When I reinitialized a subscription from SQL2005 db (publisher) to a SQL 2000 DB (Subscriber) and had the Upload changes before reinitialization turned on, the data from the SQL 2000 db didn't get uploaded. This resulted in a loss of 2 days worth of data.
Does anyone have any idea if there's anywhere that data is kept. (unfortunately a series of errors caused our backups to not be running on the 2000 db either).
Thank You
Bob
View 6 Replies
View Related
Oct 16, 2006
I'm having an error with merge replication my suscriber are downloading old data, all this start happen after I install SP4.
let explaint this with more details ,
if a made an update to a row in a table from the publisher , the agent history show that 1 change have downloaded to the suscriber, a put an audit in the suscriber and yes one update was downloaded but the row still the same, look like the suscriber downloaded old data instead of the curent change that i made.
If i delete the row, the rows gets delete at the suscriber, if a insert the row the row get insterted ok.
The problem only happen with rows inserted at the suscriber, that later on get update at the publisher. My suscriber has MSDE 2000 SP3 an my Server has SQL Enterprice 2000 SP4.
Any help would be apreciate. thxs.
View 13 Replies
View Related
Jan 25, 2007
Hi all.
I 'm trying to set up merge replication between two servers that have the same schema databases. The two database have the majority of there data the same but as well as data inserted at a later time independently on the two servers. (The two servers were connected in a merge replication scheme that failed at some later time and replication was paused, but users continout to insert data indepentedly at the two servers.)
I need to get them up and running.
I cleaned replication at both servers, I recreated the publication at the puplisher distributor and all is fine.
When I create a push subscription to the subscriper I get the error invalid column name 'rowguidcol' .
I so far managed to have merge replication running on two identical databases (schema and data).
Just some thoughts. After some reading I found that it might be related to identities and identity range or indexes. I set the identity seed and increment at 2, 2 at publisher and at 1,2 at subscriper. (On the same tables at puplisher and subscriber.) Is that ok? is that the way to do it?
Digging a bit more Using the SQL Profiler I can locate the error to happen when sp_MSaddmergetriggers executes.
Thanks allot for any help
Version.
Microsoft SQL Server 2000 - 8.00.2039 (Intel X86) May 3 2005 23:18:38 Copyright (c) 1988-2003 Microsoft Corporation Standard Edition on Windows NT 5.0 (Build 2195: Service Pack 4)
View 5 Replies
View Related
Jan 25, 2008
I've got a problem:
I want to transfer data between an sql server 2005 and my pocket pc. So i've installed a sql server CE on it.
I know that i can use the merge replication but, i don't have any IIS. So, i've got to transmit data though email that have got a file attached. I Know how to email from sql server 2005. When the pocket receive that email, i don't know how to insert the data in sql ce from outlook compact. Doi have tu use SSIS , in that case how can i run the package?
thanks
View 4 Replies
View Related
Jun 29, 2015
I have the merge replication (Push)Â for SQL Server 2008.The right-click option for Start and Stop Synchronizing in subscriptions has been disabled. How can I stop the merge replication and start again ?
This error happened 1 week after I created the merge replication. The merge data cannot sync to subscriber and only solution I can use is drop and re-create the merge replication again but error would be re-occur a week later. The merge replication work fine before and start from middle on May 2015, but it keep happen right now.
View 8 Replies
View Related
Apr 19, 2008
Hi all,
there are 2 datagrids i have taken,
1st for displaying data before inserting the value into table
2nd for displaying data after inserting the value into table
just see the screeenshot which i have taken
actually the problem is, we are not getting any type of errors even though I have try/catch blocks.
I have colored that particular statement in RED color, where it is getting stuck, while executing, if we sit 40-45 minutes then also the execution pointer is not going on next step.
please look into this, and if u have any idea/person by which/whom we can solve this then please tell us.......
-chaukse rahul
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
using System.Reflection;
using System.Data.SqlServerCe;
using System.Data.Common;
namespace ProjectSQLMobile2
{
public partial class Form1 : Form
{
private DataSet dsMemberList;
public Form1()
{
InitializeComponent();
}
private void Form1_Load(object sender, EventArgs e)
{
Sync();
}
private void Sync()
{
SqlCeReplication repl = new SqlCeReplication();
repl.InternetUrl = @"http://169.254.25.129/WebSQLMobile/sqlcesa30.dll";
repl.Publisher = @"RAHU";
repl.PublisherDatabase = @"SQLMobile";
repl.PublisherSecurityMode = SecurityType.DBAuthentication;
repl.PublisherLogin = @"sa";
repl.PublisherPassword = @"sa12345";
repl.Publication = @"PubSQLMobile";
repl.Subscriber = @"SubSQLMobile";
repl.SubscriberConnectionString = @"Data Source=TestLast.sdf;Max Database Size=128;Default Lock Escalation =100;";
try
{
if (!System.IO.File.Exists(@"TestLast.sdf"))
{
repl.AddSubscription(AddOption.CreateDatabase);
}
repl.Synchronize();
}
catch (SqlCeException ex)
{
DisplaySQLCEErrors(ex);
}
finally
{
repl.Dispose();
}
/*
*
* To Display Data Into DataGrid1 Before Insert
*
*/
SqlCeConnection cn = new SqlCeConnection(@"Data Source=TestLast.sdf");
SqlCeDataAdapter daMemberList = new SqlCeDataAdapter("SELECT MemberID, MemberName FROM MembershipData", cn);
if (dsMemberList == null)
{
dsMemberList = new DataSet();
}
try
{
dsMemberList.Clear();
daMemberList.Fill(dsMemberList, "MembershipData");
dataGrid1.DataSource = dsMemberList.Tables["MembershipData"];
}
catch (SqlCeException ex)
{
DisplaySQLCEErrors(ex);
}
}
private void Merge()
{
SqlCeReplication repl = new SqlCeReplication();
repl.InternetUrl = @"http://169.254.25.129/WebSQLMobile/sqlcesa30.dll";
repl.Publisher = @"RAHU";
repl.PublisherDatabase = @"SQLMobile";
repl.PublisherSecurityMode = SecurityType.DBAuthentication;
repl.PublisherLogin = @"sa";
repl.PublisherPassword = @"sa12345";
repl.Publication = @"PubSQLMobile";
repl.Subscriber = @"SubSQLMobile";
repl.SubscriberConnectionString = @"Data Source=TestLast.sdf;Max Database Size=128;Default Lock Escalation =100;";
try
{
if (!System.IO.File.Exists(@"TestLast.sdf"))
{
repl.AddSubscription(AddOption.CreateDatabase);
}
repl.Synchronize();
}
catch (SqlCeException ex)
{
DisplaySQLCEErrors(ex);
}
finally
{
repl.Dispose();
}
/*
*
* To Display Data Into DataGrid2 After Insert
*
*/
SqlCeConnection cn = new SqlCeConnection(@"Data Source=TestLast.sdf");
SqlCeDataAdapter daMemberList = new SqlCeDataAdapter("SELECT MemberID, MemberName FROM MembershipData", cn);
if (dsMemberList == null)
{
dsMemberList = new DataSet();
}
try
{
dsMemberList.Clear();
daMemberList.Fill(dsMemberList, "MembershipData");
dataGrid2.DataSource = dsMemberList.Tables["MembershipData"];
}
catch (SqlCeException ex)
{
DisplaySQLCEErrors(ex);
}
}
private void DisplaySQLCEErrors(SqlCeException ex)
{
for (int i = 0; i < ex.Errors.Count; i++)
{
MessageBox.Show("Index #" + i.ToString() + ""
+ ex.Errors.Source + ""
+ "Error: " + ex.Errors.Message,
"Error No. " + ex.Errors.NativeError.ToString());
}
}
private void buttonInsertData_Click(object sender, EventArgs e)
{
//add directly into ce database sample:
SqlCeConnection cn = new SqlCeConnection(@"Data Source=""TestLast.sdf""");
string SQL = "INSERT INTO MembershipData(MemberName) VALUES('" + textBox1.Text + "')";
cn.Open();
SqlCeCommand cmd = new SqlCeCommand(SQL, cn);
cmd.CommandType = CommandType.Text;
try
{
/*
* This statement is taking too much time to be executed * what should we do??????? */ cmd.ExecuteNonQuery(); }
catch (SqlCeException ex)
{
DisplaySQLCEErrors(ex);
}
finally
{
cn.Close();
}
Merge();
}
}
}
please help,
ur help will be appriciates
NOTE:- I am getting output in 1st datagrid, but in 2nd dtagrid there is no output
View 1 Replies
View Related
Nov 22, 2006
This is just too simple. I must be doing something wrong. I have tried everything, redoing the SQLMobile merge publication, setting permissions, and need help ASAP.
The basic test with the http://localhost/sqlmobile/sqlcesa30.dll returns the message:
SQL Server Mobile Server Agent 3.0
I have tried the merge replication with both my local SQL Server 2005 installation and a remote development box. Both instances return the same error.
I am able create and replicate a database using the sample application:
http://msdn2.microsoft.com/en-us/library/ms171908.aspx
However, another simple applications fails to synchronize when simply using the following code block:
Dim repl As New SqlCeReplication()
repl.InternetUrl = "http://xens/sqlmobile/sqlcesa30.dll"
repl.Publisher = "xena"
repl.PublisherDatabase = "SQLMobile"
repl.PublisherSecurityMode = SecurityType.NTAuthentication
repl.Publication = "SQLMobile"
repl.Subscriber = "sqlmobile"
repl.SubscriberConnectionString = _
"Data Source='" + filename + "';Password='';" _
& "Max Database Size='128';Default Lock Escalation ='100';"
repl.AddSubscription(AddOption.CreateDatabase)
repl.Synchronize()
Here is the error message:
Error Code: 80072EE7
Message: A request to send data to the computer running IIS has failed. For more information, see HRESULT.
Minor Err. 28037
Source Microsoft SQL Server 2005 Mobile Edition
--------------------------------------------------------------------------------------
Here is the full code sample:
Imports System.Data.SqlServerCe
Imports System.Text
Public Class Form1
Private engine As SqlCeEngine
Private repl As New SqlCeReplication()
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
engine = New SqlCeEngine()
engine.LocalConnectionString = "Data Source=""sqlmobile.sdf"";Max Database Size=128;Default Lock Escalation =100;"
engine.CreateDatabase() <- First method creates database
engine.Dispose()
engine = Nothing
repl.InternetUrl = "http://xena/sqlmobile/sqlcesa30.dll"
repl.Publisher = "xenaSQL2005"
repl.PublisherDatabase = "SQLMobile"
repl.PublisherSecurityMode = SecurityType.NTAuthentication
repl.Publication = "SQLMobile"
repl.Subscriber = "SQLMobile"
repl.SubscriberConnectionString = "Data Source=""sqlmobile.sdf"";Max Database Size=128;Default Lock Escalation =100;"
Try
'repl.AddSubscription(AddOption.CreateDatabase) <- this method fails also
repl.AddSubscription(AddOption.ExistingDatabase)
repl.Synchronize() <-- Code fails here with the error message shown.
Catch err As SqlCeException
ShowErrors(err)
'MessageBox.Show(err.ToString)
End Try
End Sub
Public Sub ShowErrors(ByVal e As SqlCeException)
Dim errorCollection As SqlCeErrorCollection = e.Errors
Dim bld As New StringBuilder
Dim inner As Exception = e.InnerException
Dim err As SqlCeError
If Not inner Is Nothing Then
MessageBox.Show(("Inner exception: " & inner.ToString()))
End If
' Enumerate each error to a message box.
For Each err In errorCollection
bld.Append((ControlChars.Cr & " Error Code: " & err.HResult.ToString("X")))
bld.Append((ControlChars.Cr & " Message : " & err.Message))
bld.Append((ControlChars.Cr & " Minor Err.: " & err.NativeError))
bld.Append((ControlChars.Cr & " Source : " & err.Source))
' Retrieve the error parameter numbers for each error.
Dim numPar As Integer
For Each numPar In err.NumericErrorParameters
If 0 <> numPar Then
bld.Append((ControlChars.Cr & " Num. Par. : " & numPar))
End If
Next numPar
' Retrieve the error parameters for each error.
Dim errPar As String
For Each errPar In err.ErrorParameters
If [String].Empty <> errPar Then
bld.Append((ControlChars.Cr & " Err. Par. : " & errPar))
End If
Next errPar
MessageBox.Show(bld.ToString())
bld.Remove(0, bld.Length)
Next err
End Sub
End Class
Thanks in advance....
View 4 Replies
View Related
Mar 9, 2007
How to speedup data from subscriber to Publisher on Merge replication?
Is there any we can speed up data from Subscriber to Publisher (uploading).
Subscriber downloading data from publisher running more than 20 hours after drop and recreate subscriber.
Could you please post reply.
Regards
Ponnu
View 2 Replies
View Related
Jul 7, 2004
Hi
I am new to Sql server and had just finished the MErge Replication setup on one of the PRoduction server. Today I got the request to change one of the Datatype of one the Published Article. Please help as what are the correct step to make it happen. Is there any production downtime required and if yes , then how much.
Thanks in Advance
Sanjay
View 1 Replies
View Related
Aug 12, 2015
How to resolve the data inconsistent errors in merge replication ?
View 0 Replies
View Related
Apr 3, 2007
Hello,
If I want to access or modify my local subscription data(not the configuration) how can I do that(from sql server 2005 or from asp.net)? Also can i update directly to the local subscriptions data or do I need another layer which will update from a table for example??
Thank you
Salah
View 3 Replies
View Related
Aug 29, 2007
Hello,
Is it possible to use existing data flow components (Merge Join, aggregation,...) in a custom data flow component?
Thanks,
Yoann
View 15 Replies
View Related
Feb 14, 2006
Hi, All,
I need to pass a parameter from control flow to data flow. The data flow will use this parameter to get data from a Oracle source.
I have an Execute SQL task in control flow to assign value to the Parameter, next step is a data flow which will need take a parameter in the SQL statement to query the Oracle source,
The SQL Looks like this:
select * from ccst_acctsys_account
where to_char(LAST_MODIFIED_DATE, 'YYYYMMDD') >?
THe problem is the OLE DB source Edit doesn€™t have anything for mapping parameter.
Thanks in Advance
View 2 Replies
View Related
Mar 9, 2007
I have an Execute SQL Task that returns a Full Rowset from a SQL Server table and assigns it to a variable objRecs. I connect that to a foreach container with an ADO enumerator using objRecs variable and Rows in first table mode. I defined variables and mapped them to the columns.
I tested this by placing a Script task inside the foreach container and displaying the variables in a messagebox.
Now, for each row, I want to write a record to an MS Access table and then update a column back in the original SQL Server table where I retreived data in the Execute SQL task (i have the primary key). If I drop a Data Flow Task inside my foreach container, how do I pass the variables as input to an OLE DB Destination on the Data Flow?
Also, how would I update the original source table where source.id = objRects.id?
Thank you for your assistance. I have spent the day trying to figure this out (and thought it would be simple), but I am just not getting SSIS. Sorry if this has been covered.
Thanks,
Steve
View 17 Replies
View Related
Jan 17, 2008
Dear All!
My package has a Data Flow Task. In Data Flow Task, I use a Script Component and a OLE BD Destination to transform data from txt file to database.
Within Data Flow Task, I want to call File System Task to move file to a folder or any Task of "Control Flow" Tab. So, Does SSIS support this task? Please show me if any
Thanks
View 3 Replies
View Related
May 17, 2007
Hi everyone,
Primary platform is 64 bit cluster.
How to move information allocated in SSIS variables from Data Flow to Control Flow layers??
We've got a SSIS package which load a value into a variable inside a Data Flow. Going back to Control Flow how could we retrive that value again????
Thanks in advance and regards,
View 4 Replies
View Related
Jan 12, 2006
I'm currently setting variables at the package level with an ExecuteSQL task. This works fine. However, I'm now starting to think about restartability midway through a package. It would be nice to have the variable(s) needed in a data flow set within the data flow so that I only have to restart that task.
Is there a way to do that using an SQL statement as the source of the value in a data flow?
OR, when using checkpoints will it save variable settings so that they are available when the package is restarted? This would make my issue a moot point.
View 2 Replies
View Related
Jan 10, 2008
I am trying to use the merge join example in the following link. To import new records only.
http://www.sqlis.com/311.aspx
The problem is that for some unkown reason the join is not woeking correctly. One of the records is incorrectly showing a NULL on the output. This would indicate that it would be a new record, but it is not it already exists in the new table.
I created a dummy table in SQL and executed the same join and I always get the right answer. What the heck could be wrong?
For example. Table A has 20 records Table B has 3 records. Table B has the new records I want to import into Table A. The package runs corectly the first time, only importing the 3 new records. Then the next time the package runs it shows 1 of the 3 records as being new still, and tries to import the record causing a PK error. Adding a watch to the MERGE output shows that the one record has a NULL on the join.
Please help this is driving me nuts.
View 10 Replies
View Related
Apr 16, 2008
I have this code below, one thing i am trying to do is merge 2 columns, it seems what i have now is suming them can someone give me a hint or two thanks.
Code Snippet
SELECT a.*, b.*, a.Company + b.[Customer Suffix] AS AdditionalColumn
FROM (
SELECT
abCUSA AS Company,
abCUSB AS Account,
0 AS DeliverTo,
abcnam AS [Account Name],
abcad1 AS [Line Address 1],
abcad2 AS [Line Address 2],
abcad3 AS [Line Address 3],
abcad4 AS [Line Address 4]
FROM
LIVEAS400.S65C422B.WRFDTA.PARNADR
) a
inner JOIN
(
SELECT
SLDATE as Date,
SLCUSA as [Compny Number],
SLCUSB as [Customer Suffix],
SLDELN as [Deliber To Number],
SLTREF as [Trans Reference],
SLCNAM as [Customer Name],
-- SLTRT2 as [Trans type],
CASE WHEN SLTRT2 IN (92, 93, 94, 95, 98) THEN SLGDSV * -1 ELSE SLGDSV END as [Goods Value],
CASE WHEN SLTRT2 IN (92, 93, 94, 95, 98) THEN SLVATV * -1 ELSE SLVATV END as [VAT],
CASE WHEN SLTRT2 IN (92, 93, 94, 95, 98) THEN SLTOTV * -1 ELSE SLTOTV END as Total,
SLDESC as [Trans Description]
FROM LIVEAS400.S65C422B.WRFDTA.SQLSLDGR
) b ON a.Account = b.[Customer Suffix]
View 4 Replies
View Related
May 26, 2015
What is the main difference between snapshot and transactional and merge replication?
View 5 Replies
View Related
Jul 22, 2007
Hi all! I recently started working with SSIS and one of the things that is puzzling me the most is what's the best way to go:
A small control flow, with large data flow tasks
A control flow with more, but smaller, data flow tasksAny help will be greatly appreciated.
Thanks,
Ricardo
View 7 Replies
View Related
Apr 23, 2008
I am trying to use a merge transformation task and receiving an error that I don't know how to troubleshoot further. Could I please have some advice on what else to look at to try to resolve the problem.
The error message text is: Error at Data Flow Task [Merge [1245]]: The metadata for "input column "LOCATION" (5451)" does not match the metadata for the associated output column
I have looked at the metadata and cannot see any differences: the following is output from the data flow path.
Name Data TypePrecisionScaleLengthCode PageSort Key PositionSource Component
ACCOUNT DT_STR 0 0 6 1252 1 Sort - FinSysData
PROGRAM DT_STR 0 0 6 1252 2 Sort - FinSysData
LOCATION DT_STR 0 0 6 1252 3 Sort - FinSysData
PROJECT DT_STR 0 0 6 1252 4 Sort - FinSysData
SUBPROJECTDT_STR 0 0 2 1252 5 Sort - FinSysData
ACTIVITY DT_STR 0 0 6 1252 6 Sort - FinSysData
FUNDING DT_STR 0 0 3 1252 7 Sort - FinSysData
CLIENT DT_STR 0 0 6 1252 8 Sort - FinSysData
NTWAGE DT_STR 0 0 3 1252 9 Sort - FinSysData
TYPE DT_STR 0 0 1 1252 10 Sort - FinSysData
PERIOD DT_STR 0 0 6 1252 11 Sort - FinSysData
CO DT_STR 0 0 2 1252 12 Sort - FinSysData
FIN_YEAR DT_I4 0 0 0 0 13 Sort - FinSysData
BALANCES DT_R8 0 0 0 0 14 Sort - FinSysData
Name Data TypePrecisionScaleLengthCode PageSort Key PositionSource Component
ACCOUNT DT_STR 0 0 6 1252 1 Sort - DataWarehouse
PROGRAM DT_STR 0 0 6 1252 2 Sort - DataWarehouse
LOCATION DT_STR 0 0 6 1252 3 Sort - DataWarehouse
Project DT_STR 0 0 6 1252 4 Sort - DataWarehouse
SubProjectDT_STR 0 0 2 1252 5 Sort - DataWarehouse
Activity DT_STR 0 0 6 1252 6 Sort - DataWarehouse
Funding DT_STR 0 0 3 1252 7 Sort - DataWarehouse
Client DT_STR 0 0 6 1252 8 Sort - DataWarehouse
NTWage DT_STR 0 0 3 1252 9 Sort - DataWarehouse
TYPE DT_STR 0 0 1 1252 10 Sort - DataWarehouse
Period DT_STR 0 0 6 1252 11 Sort - DataWarehouse
CO DT_STR 0 0 2 1252 12 Sort - DataWarehouse
Fin_Year DT_I4 0 0 0 0 13 Sort - DataWarehouse
Balance DT_R8 0 0 0 0 14 Sort - DataWarehouse
View 7 Replies
View Related
