Merge Replication Subscriber Error: Invalid Cursor State
Aug 13, 2004
These errors occur at the subscriber. First, "The merge process could
not query the last sent and received generations" is generated, then
immediately afterwards, "invalid cursor state" is generated. We are
trying to pull a new subscription snapshot from the republisher. The
subscriber has been added and removed from the replusher's pull
subscriptions a number of times for testing. Now, we cannot get the
subscriber to re-sync with the republisher.
Any ideas?
View 1 Replies
ADVERTISEMENT
Jul 20, 2005
I know other people have posted stuff like this before, but I am stillto see a definitive answer. I have created a table in Enterprisemanager called tblUsers. I later added a column in EM and saved thechange. I then noticed I had misnamed the column, so I renamed andwhen I tried to save the change I got the following message:-'tblUsers' table- Unable to rename column from 'fldepCode' to 'fldRepCode'.ODBC error: [Microsoft][ODBC SQL Server Driver]Invalid cursor stateThis is now regularly happening to me, and I am tired of having torecreate tables.I am using SQL Server 2000 with all the latest service packs andpatches. Has anyone any idea what is causing this and how I can cureit or avoid it?
View 2 Replies
View Related
Apr 20, 2007
Hi,
I have setup merge replication between SQL Server 2005 and SQL Server Express. The setup uses web synchronization. (And the setup uses dynamic filter HOST_NAME)
On some of the client machines, replication fails with the following error (when initializing the subscription):
from subscriber merge agent verbose log:
A dynamic snapshot will be applied from 'D:DOCUME~1JBAUMG~1.CORLOCALS~1TempDB101-EQA-SCL_BQDB_BQ_PUB_BQDB'
Validating dynamic snapshot
2007-04-1819:39:45.434 OLE DB Subscriber 'FRG-BAUMGARTENJSQLEXPRESS': sys.sp_MSregisterdynsnapseqno @snapshot_session_token=N'\XXX.XX.XX.XXSnapshotuncDB101-EQA-SCL_BQDB_BQ_PUB20070417180079dynsnap', @dynsnapseqno='5599F67E-A1A9-4573-A14F-9851F6FE4B51'
(Note: XXX.XX.XX.XX is a proper IP of DB, I have just masked it in the post)
The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file.When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.
I enabled verbose logging for the snapshot agent for the subscriber, but there was no error there. It is obvious from the log info above that the error occurs only after downloading the snapshot to the client and during applying it to the subscriber by the merge agent.
After I got this error, I tried running the subscriber program again and it successfully replicated on the third attempt. But this behavior is not consistent and it fails for most of the time on some of the machines
Any info on this error?
View 6 Replies
View Related
Jun 27, 2006
Hi all.
I get the following error when trying to run a pull subscription from the subscriber:
The schema script '' could not be propagated to the subscriber.
(Source: Merge Replication Provider (Agent); Error number: -2147201001)
---------------------------------------------------------------------------------------------------------------
The process could not connect to FTP site 'ftp://ESOFTSERVER.NO-IP.INFO' using port 21.
(Source: ESOFT (Agent); Error number: 0)
---------------------------------------------------------------------------------------------------------------
The connection with the server was reset
(Source: (OS); Error number: 12031)
---------------------------------------------------------------------------------------------------------------
I've tried everything I could to solve this problem, but I can't get it working.
Thanks for any advise.
Fabio Reynoso
View 5 Replies
View Related
Feb 11, 2000
Does anyone know what this means ??
thanks
View 1 Replies
View Related
Feb 23, 2004
When I change the Identity in a table in EM (undependend on which DB and table) the result is: invalid cursor state.
I have a productive server running SQL Standard version and an play area running SQL Personal.
The funny thing is, when I run the update over QA it works without a problem.
With EM the Profiler tells me an error 16954 after droping a table, and it start to roll back.
I tried hunderts of things to make it work but with no success. Except one thing. I've reinstalled the Personal SQL, restored my DB's and everything works fine now.
This happened first after installing the latest security update from Microsoft on the 10th of February.
I don't want necessarily to reeinstall the SQL server on the productive server, because there are hundreds of Databases on it, and a lot of security settings.
Any help is very appreciated.
View 2 Replies
View Related
Feb 25, 2005
Hi,
I have a stored procedure that calls 2 other stored procedures and combines the results into a temporary table. The results of the temporary table is then returned from the stored procedure.
When I execute the stored procedure in Query Analyzer, I get the exact data I want in the correct format - no errors.
When I execute that stored procedure in Omnivex SQL Link 3, I get an "Invalid Cursor State" error.
I did some digging on that error, and found that it could be related to print statements within the stored procedures. I removed all print statements from all 3 stored procedures and the error is still occuring.
Any suggestions?
View 5 Replies
View Related
May 1, 2006
I have written a routine to search a unique record using prepared statement. Its my first sql coding with c++.
I am not using / importing any dlls.
I connect+allocs handels , then use SQLPrepare(StmtHandle, SQLStmt,SQL_NTS); to generate a guery.
I have written bind parameters and sqlexecute +sqlFetch in a loop and loop gets executed till ESC key is pressed.
First time when I bind paramaters using SQLBindParameter it works perfect.
When loop gets executed secondtime onwards, it gives an error.
SQLState: 24000 [ODBC Client Interface]Invalid cursor state.
If I open connection, handles, and prepared starement in same loop, THEN it gives correct record without 24000 error.
I want the advantage of prepared staement. So I do not want to close and open connection and prepare statement every time.
Have I missed any step?
Where & when I should code the cursor type? Any specific libraries I need to link?
Thanks
View 2 Replies
View Related
Jul 6, 2006
Hello experts. Excuse my SQL newbie status. I was writing a stored procedure to crunch some data against an MS SQL 2000 database. I didn't entirely know what I was doing so I was using Crystal Reports 11 as an "application layer" pulling against a stored procedure. Well I guess ODBC connections don't support temp table output from stored procedures, or at least I don't know how to do it.
So I've rewritten my stored procedure so it inputs and outputs data using BCP, rather than just sending a simple select query.
My problem is that I cannot get CR to add the stored procedure back in to the report. Everytime I try I get an 'ODBC 24000 error - Invalid Cursor State.'
Where is this current set of records? How do I find it and close it? I've recreated my ODBC connection, every related table and SP to no avail. This is my crusial question.
Less crucial but helpful: How do I write an SP so it can be called from a report program like CR and will return its result set to the application? What's a good, simple "application layer" I can use if I'm doing all the logic in native SQL stored procedures? ASP.NET looks like a pain in the ass, and SQL Reporting Services requires Visual Studio .NET 2003. Is Perl my answer, since I can build web interfaces and forms in my sleep?
View 1 Replies
View Related
Jul 3, 2007
When I try to modify a table that I just created I get the following error message: - Unable to modify table ODBC error:[Mircrosoft][ODBC SQL Server Driver] Invalid cursor state.
SP3 has been applied to SQL Server 2000.
Can anyone help explain what is causing this error? There is sufficient space for the database and transaction log.
View 2 Replies
View Related
May 15, 2007
Hi there,
I have setup merge replication which successfully synchronizes with a group of desktop users using SQL Compact Edition.
However now I have setup Article Filters and when I attempt to regenerate the snapshot I get the following error:
Invalid column name 'rowguid'.
Failed to generate merge replication stored procedures for article 'AssignedCriteria'.
When I look at publication properties at the Articles page.. All my tables have the rowguid uniqueidentifier successfully added to tables and selected as a compulsory published column, apart from the table above "AssignedCriteria".. Even when I attempt to select this column in the article properties page and press ok, when I come back it is deselected again. ( The Rowguid column is however physically added to the table)
I have scripted the publication SQL and then totally reinstalled from scratch, including the database but for some reason it doesn't like this table. I remove the article filters, but still this "rowguid" is never "selected" in article properties.
We are using Uniqueidentifiers in other columns as well for historical reasons, but this doesn't appear to be a problem in other tables..
DDL For this problematic table is as follows
CREATE TABLE [dbo].[AssignedCriteria](
[AssignedCriteria] [uniqueidentifier] NOT NULL,
[CriteriaName] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[TargetScore] [numeric](5, 0) NULL,
[HRPlan] [uniqueidentifier] NULL,
[ActualScore] [numeric](18, 0) NULL,
[Criteria] [uniqueidentifier] NULL,
[Employee] [uniqueidentifier] NULL,
[IsActive] [bit] NULL,
[addDate] [datetime] NULL,
[totalscore] [numeric](5, 0) NULL,
[isCalc] [bit] NULL,
[Weight] [decimal](18, 2) NULL,
[ProfileDetail] [uniqueidentifier] NULL,
[rowguid] [uniqueidentifier] ROWGUIDCOL NOT NULL CONSTRAINT [MSmerge_df_rowguid_7FF25DF903B6415FBFF24AC954BC88E4] DEFAULT (newsequentialid()),
CONSTRAINT [PK_AssignedCriteria] PRIMARY KEY CLUSTERED
(
[AssignedCriteria] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
Thanks.
View 5 Replies
View Related
Sep 6, 2001
SQL Server 7.0 SP3
I am using the "Pull Subscription Wizard" to set up merge replication. I go through all the steps of the wizard and then I hit "Finish" at the end. When it gets to the third step (Creating the Subscription), I get the old:
__________________________________________________ _________
mmc.exe has generated errors and will by closed by Windows.
You will need to restart the program.
An error log is being created.
__________________________________________________ _________
This happens whether I try to do this from my PC or from the actual server I am creating the subscription on.
Has anyone else had this issue? Is there a hotfix I need?
Any help is appreciated.
Thanks,
Craig
View 1 Replies
View Related
Jul 26, 2004
I am using merge replication with a push subscription type. I am wondering if the updates of the tables on the subscriber side are push to the publisher from the subscriber or pulled from the subscriber by the publisher when the syncronisation takes place. this makes a big diferrence for me and i can't find the answer to this question anywhere...
if anyone could answer it would be really appreciated
Thanks
View 3 Replies
View Related
Nov 17, 2007
Using SQL CE 3.1 merge replication. Working fine, but want to make subscription read only. In other words, master/slave pattern.
How is this accomplished?
View 3 Replies
View Related
Sep 22, 2007
Hi.
I have setup an SQL Server 2005 Merge Replication.
Now I need to display the status of the replication programatically from the subscriber side, I have checked the documentation which mentions MergeSubscription & MergeSubscriberMonitor but I couldn't know how to use them!!
Any Help ?
Thanks
View 3 Replies
View Related
Oct 20, 2006
Using Merge replication between SQL Server 2000 and SQL Server CE,
is there any way that row deletes could occur on the subscriber without a reinitialize
or explicit delete of row on publisher.
More specifically, if there is a row filter that returns a days worth of data with each
days pull, for example, and the filter looked like
select <columns> from Table where UpdateDate < GETDATE() and UpdateDate >= DATEADD(d,1,GETDATE())
would there be some implicit delete at subscriber each day because data sent changed?
My research indicates this does not happen, but I have a colleague who thinks differently.
View 5 Replies
View Related
Apr 28, 2007
Hi,
I need a urgent help! The problem is that every synchronization only transfer data from subscriber to publisher, but not the other direction. The publisher is sql server 2005 standard edition, and the subscriber is 2005 express. Is that any stored-procedure to deal with such a problem?
Thanks for any commnet.
View 14 Replies
View Related
Jun 29, 2015
I have the merge replication (Push)Â for SQL Server 2008.The right-click option for Start and Stop Synchronizing in subscriptions has been disabled. How can I stop the merge replication and start again ?
This error happened 1 week after I created the merge replication. The merge data cannot sync to subscriber and only solution I can use is drop and re-create the merge replication again but error would be re-occur a week later. The merge replication work fine before and start from middle on May 2015, but it keep happen right now.
View 8 Replies
View Related
Mar 4, 2015
We have a central office with a SQL2005SP4 server (yeah, I know... old as heck) that's the main database and it has multiple subscribers in regional offices. Well... one of the regional offices server is failing, and it needs to be replace.
The original server is an ancient Win2003 86x
The Server team will build a new Win2008r2 64x, and use the same name and IP address
And I'm tasked with the SQL part.
I'll be installing the same version/patch of SQL, but 64x instead, and migrate all databases, including the system databases.
How do I handle replication? Do I need to reintialize from scratch? or can I just use the backup as a starting point?
View 1 Replies
View Related
Jul 18, 2007
Hi all,
We are using a mix of SQL 2005 and 2000 servers and our "main" database server is running SQL 2005 x64 (SP2 ver. 3042).
Our system has run perfectly for months, then subsequent to an SP2 update we are seeing several instances where the data record counts are different for several tables among all the servers.
We are using Merge Replication, with no filters and published every 2 minutes.
Any ideas?
TIA,
Michael
View 1 Replies
View Related
Mar 9, 2007
How to speedup data from subscriber to Publisher on Merge replication?
Is there any we can speed up data from Subscriber to Publisher (uploading).
Subscriber downloading data from publisher running more than 20 hours after drop and recreate subscriber.
Could you please post reply.
Regards
Ponnu
View 2 Replies
View Related
Nov 6, 2015
For study effect, can I configure merge replication using just one SQL Server Instance?
View 3 Replies
View Related
Jun 9, 2006
We have SQL Server 2000 with merge replication at a Publisher and subscriber.
We have some records getting deleted at Publisher and Subscriber and no conflicts are logged.
We have tried the compensate_for_errors setting and this has had no effect.
This is causing serious data corruption and has now become an URGENT issue. Out tech team are almost out of ideas.
Has anyone experienced this or have any ideas as to what to check next?
View 3 Replies
View Related
May 12, 2015
We have a filtered publisher (SQL Server 2012) with several pull and push subscriptions that have been functioning fine for years.
We have just added a new pull subscriber from a remote server. We configured an alternate folder location on the subscriber (pointing to existing path on a remote server). We generated new snapshot and partitioned snapshot, and moved to subscribing server at alternate path.We're seeing a problem we've never seen before:
When the merge agent runs, it applies the schema and performs a few hundred bulk inserts, but then proceeds to 'download changes to subscriber' as though the snapshot is old (it is brand new and should have all transactions). We have never seen this before, i.e. all data is usually applied in bulk when creating a new or reinitializing an existing subscriber.
we marked the subscriber for re-initialization (from both the publishing and subscribing server) with a fresh set of snapshots. The same problem occurred.We have also tried in our test environment (which mirrors production) and the snapshot applies as expected (via bulk inserts).
(It might be relevant to note the publisher was recently upgraded in-place from 2005 to 2012.)
View 11 Replies
View Related
May 14, 2015
How to check if web merge sync is working between a subscriber and publisher thru HTTPS ? SQL port 1433 at subscriber is blocked so no direct connection to subscriber.
View 2 Replies
View Related
Oct 11, 2004
Howdy Folks,
Our site has been experiencing this issue for a couple of months now.. Hopefully someone else can assist, as I’ve got to a point where I think issue lies within the application or a Microsoft bug. Web searches have reveled a number installations that have also had this error but its has not revealed an actual fix.
I understand this error code basically means data being returned to the client is getting either corrupted or the data is too large to fit into the buffer on the client side. Client in our case is the terminal server, here after called a application server
As the user base has increased form 5 to 20, I have noticed that the issue is occurring more frequently in comparison to when the company first started using the application /database. Its just about daily now...
The db server also has 8 other db's residing on it - but they are all less than 300 meg.
The attached PowerPoint doc has the trace info & the surrounding code for each process that has suffered a buffer error over a period of a week.
DB Server Environment: Win2000 SP4, SQL2000 SP3a, MDAC 2.7 SP1 refresh.
Application Environment: Written In house in VB.NET Framework 1.1 – setup as a published app on a terminal server – running windows 2000 SP4
Common features of the issue, that have been omitted from trace output for visibility reasons are:
-Involves 1 particular DB (thats accessed by VB app) & its developement db
-All connections are coming from 1 application server
-Issue does not relate to any particular site connecting to the application server using this application
I have reviewed & fixed several potential server side causes but this error still is occuring with in the environment:
MDAC versions must be common on application & server:
- Removed from equation by updating MDAC version on App server to be the same as DB Server: 2.7 SP1 Refresh
Network related
- Considered unlikely; we are also not experiencing network card errors on either server; also all db's would be experiencing connectivity errors.
Which leaves us with Application related options to review:
- Compilation error of application
- App parameter definitions to stored procedures are the correct data type
- Ensure values being passed do not exceed 4000 characters as that has also been known to create this error message
- I've asked the developer to review MS KB 827366 article, as it may be a valid test
- In regard to MSKB 832977 - I am not using pssdiag & have a later version of the MS Analyzer. But what I thought was interesting, is the statement that this problem occurs more frequently when an application submits a large remote procedure call (RPC) input buffer, especially when the RPC input buffer is greater than or equal to 8 KB. However, this problem may occur even if the input buffer is less than 4 KB
- A is using datatypes varchar & char - not nvarchar & nhar
Any assistance with this issue would be appreicated as server performance is being effected - these processes hang around for 1 - 5 mins before terminating (refer duration times in the powerpoint traces)
Thanks In advance
Suze.
View 4 Replies
View Related
Aug 16, 2004
Hi,
I'm using merge replication to maintain a backup copy of my main (publisher)MSDE database. A push subscription periodically (1 per minute) updates the backup DB.
It's intended that if the main db goes down then the backup (subscription) db can be configured as a publisher. This must all be performed via scripting.
The initial configuration of the main publisher and subscription is controlled via scripting, which works fine.
The problems occur when I try to configure the subsciber to become a publisher. A script is executed on the subscriber but fails at the point when it's configuring the publisher detail. The error is something like "unable to configure a publication for a database setup as an anonymous subscription".
I'm guessing that there are subscritpion artifacts added to the database which need to be removed before it can be configured as a new publisher.
Please help,
Jez W
View 1 Replies
View Related
Sep 13, 2006
Hi,
I have set up a publisher using transactional replication. ( all seems ok). The initial snapshot has been generated.
The replication share on the distributor has all the generated DDL in it.
I add a subscriber. The tables are generated up to tblCountry then I get an incorrect syntax near ')' error
The Replication Monitor shows the following code as the cause. ( bold indicates incorrect sql)
Is this a bug in Replication (as this is an autogenerated sp)or have I configured something incorrectly?
The ddl for the table index is as follows ( from the replication folder)
/----
CREATE TABLE [APP].[tblCountry](
[CountryId] AS ([ISO 3166-1 NUMERIC-3]) PERSISTED NOT NULL,
[CountryCode] AS ([ISO 3166-1 ALPHA-2]) PERSISTED NOT NULL,
[CountryName] [varchar](80) COLLATE Latin1_General_CI_AS NOT NULL,
[ISO 3166-1 ALPHA-2] [char](2) COLLATE Latin1_General_CI_AS NOT NULL,
[ISO 3166-1 ALPHA-3] [char](3) COLLATE Latin1_General_CI_AS NOT NULL,
[ISO 3166-1 NUMERIC-3] [int] NOT NULL
)
GO
---/
/------ Keys ddl (.dx)
ALTER TABLE [APP].[tblCountry] ADD CONSTRAINT [PK_TBLCOUNTRY] PRIMARY KEY CLUSTERED ([CountryId])
go
ALTER TABLE [APP].[tblCountry] ADD CONSTRAINT [UQ_TBLCOUNTRY_ALPHA2] UNIQUE NONCLUSTERED ([ISO 3166-1 ALPHA-2])
go
ALTER TABLE [APP].[tblCountry] ADD CONSTRAINT [UQ_TBLCOUNTRY_ALPHA3] UNIQUE NONCLUSTERED ([ISO 3166-1 ALPHA-3])
go
ALTER TABLE [APP].[tblCountry] ADD CONSTRAINT [UQ_TBLCOUNTRY_COUNTRYNAME] UNIQUE NONCLUSTERED ([CountryName])
go
--------/
/------------
Command attempted:
create procedure "sp_MSins_APPtblCountry_msrepl_ccs"
@c1 int,@c2 varchar(80),@c3 char(2),@c4 char(3),@c5 int
as
begin
if exists ( select * from "APP"."tblCountry"
where
)
begin
update "APP"."tblCountry" set
"CountryName" = @c2
,"ISO 3166-1 ALPHA-2" = @c3
,"ISO 3166-1 ALPHA-3" = @c4
,"ISO 3166-1 NUMERIC-3" = @c5
where
end
else
begin
insert into "APP"."tblCountry"(
"CountryName"
,"ISO 3166-1 ALPHA-2"
,"ISO 3166-1 ALPHA-3"
,"ISO 3166-1 NUMERIC-3"
)
values (
@c2
,@c3
,@c4
(Transaction sequence number: 0x00000016000004F2014500000000, Command ID: 213)
------------/
View 5 Replies
View Related
Aug 25, 2006
Replication-Replication Merge Subsystem: agent TRPSQL3-ThomsonResearch-TR Pub-TRPSQL2-4 failed. The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history log
I am getting the above error in Merge Replication. any one having any idea pls let me know.
Thanks & Regards,
Kasi.
View 1 Replies
View Related
Aug 25, 2006
In Merge Replication, I am not able to replicate one table having more than 5 GB data to the subscriber. If I have filter on the table I am able to do. I couldn't understand the problem? Any one having any idea on the same?
For your information.
I have 1.7GB free space in C drive. Is it a space problem in C drive? Actually my data base is storing in E drive. It has 30GB free space. But Sql Server installed in D drive it has 2 GB free space.
Thanks in advance
Kasi.
View 4 Replies
View Related
Jun 26, 2006
Hi,
We have an HTTPS merge publication which has been working fine, but all of a sudden the subscription for a subscriber is failing with the following message at the publisher:
Error messages: The process could not read the request message due to OS error
10054. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147014842) Get help:
http://help/MSSQL_REPL-2147014842 The format of a message during Web
synchronization was invalid. Ensure that replication components are properly
configured at the Web server. (Source: MSSQL_REPL, Error number: MSSQL_REPL-
2147199374) Get help: http://help/MSSQL_REPL-2147199374 The subscription to
publication 'yarraman main' could not be verified. Ensure that all Merge Agent
command line parameters are specified correctly and that the subscription is
correctly configured. If the Publisher no longer has information about this
subscription, drop and recreate the subscription. (Source: MSSQL_REPL, Error
number: MSSQL_REPL-2147201019) Get help: http://help/MSSQL_REPL-2147201019
We have 2 subscribers to this publication and it is working fine for the other subscriber..
Help !
thanks
Bruce
View 1 Replies
View Related
Jul 3, 2006
Hi,
I have made two subscription in Merge Replication .
One Subscription is syncing data properly while other on is giving error
'The process could not enumerate changes at the 'Publisher'. error -2147200999
MS SQL Server Service Pack 4 is installed.
Now how can resolve it.
Thanks
Sanjay Tiwari
View 1 Replies
View Related
Apr 18, 2006
Dear Friends,
I am very new to replication, For learning purpose I am trying to setup merge replication. The given setup I am using.
1. Windows 2000 Server + SP4 (Publisher for SQL 2000)
2. Windows 2003 Server + SP1 (Subscriber For SQL 2000)
I am getting a replication error, I have taken this errors details from merge agent on publisher server.
Find enclosed replication error details in the microsoft document file format (.doc). The document is consist of three SQL Server snapshot rather three diffrent errors.
In the pictures you can find the red & white color cross (wrong sign) on replication monitor tab, I don't know why it is appearing. :confused:
Kindly, give me guidance to rectify this error & setup the marge replication between two SQL 2000 Servers.
View 2 Replies
View Related
