Merge Two Rows Only If TagWidgetIDs Same But Tag Values Different?
May 15, 2015
I have this stored procedure which generates the following output.
The query which generates the output from the stored procedure is as follows:
SELECT tat.[agent-id],
tat.[agent-guid],
tat.[agent-name] AS [AgentName],
tw.TagWidgetID,
tw.TagWidgetName,
t.TagID,
core.fnInitialCapitalization(t.DisplayName) AS TagName,
[Code] ....
How can I join the output rows only if the TagWidegetIds are same but the TagValues, TagIndex and ValueIndex columns are different?
View 3 Replies
ADVERTISEMENT
Aug 12, 2015
I need to merge column values (#Status.Status) based on OrderID onto #Orders.NewStausCombined field separated by commas .
CREATE TABLE #Status
(
ID INT IDENTITY (1,1) PRIMARY KEY,
OrderID INT,
Status VARCHAR(20)
)
INSERT INTO #Status ( OrderID, Status )
[code].....
View 3 Replies
View Related
Jun 4, 2007
Hello all,
I am trying to think my way through a solution which I believe others have probably come across... I am trying to implement a matching routine wherein I need to match an address against a high value and a low value (or, for that matter an input date vs. a start and end date) to return the desired row ... i.e. if I were to use a straight vb program I would just use the following lookup:
"SELECT DISTINCT fire_id, police_ID, fire_opt_in_out, police_opt_in_out FROM ipt_tbl " & _
" WHERE zip_code = @zip_code AND addr_prim_lo <= @street_number AND addr_prim_hi >= @street_number " & _
" AND addr_prim_oe = @addr_prim_oe AND street_pre = @street_pre AND street_name = @street_name " & _
" AND street_suff = @street_suff AND street_post = @street_post " & _
" AND (expiry_date = '' OR expiry_date = '00000000' OR expiry_date > @expiry_date)" & _
" GROUP BY fire_ID, police_ID, fire_opt_in_out, police_opt_in_out"
My question, then, is how would you perform this type of query using a lookup / merge join or script? I have not found a way to implement a way to set the input columns? I can set the straight matches without a problem, i.e. lookup zip code = input zip code, but can't think of the correct way to set comparisons, i.e. lookup value 1 <= input value AND lookup value 2 >= input value
Any suggestions?
thanks for your time...
View 5 Replies
View Related
May 8, 2008
I have the following variables VehicleID, TransactDate, TransactTime, OdometerReading, TransactCity, TransactState.
VehicleID is the unique vehicle ID, OdometerReading is the Odometer Reading, and the others are information related to the transaction time and location of the fuel card (similar to a credit card).
The records will be first grouped and sorted by VehicleID, TransactDate, TransactTime and OdometerReading. Then all records where the Vehicle ID and TransactDate is same for consecutive rows, AND TransactCity or TransactState are different for consecutive rows should be printed.
I also would like to add two derived variables.
1. Miles will be a derived variable that is the difference between consecutive odometer readings for the same Vehicle ID.
2. TimeDiff will be the second derived variable that will categorize the time difference for a particular vehicle on the same day.
My report should look like:
VehID TrDt TrTime TimeDiff Odometer Miles TrCity TrState
1296 1/30/2008 08:22:42 0:00:00 18301 000 Omaha NE
1296 1/30/2008 15:22:46 7:00:04 18560 259 KEARNEY NE
Can someone please help me here?
Thanks,
Romakanta
View 1 Replies
View Related
Mar 25, 2002
I'm stuck. I have a table that I want to pull some info from that I don''t know how to.
There are two colomuns, one is the call_id column which is not unique and the other is the call_status column which again is not unique. The call_status column can have several values, they are ('1 NEW','3 3RD RESPONDED','7 3RD RESOLVED','6 PENDING','3 SEC RESPONDED','7 SEC RESOLVED').
i.e example, this is the existing data.
Call_id Call_Status
555555 3 3RD RESPONDED
235252 7 SEC RESOLVED
555555 7 3RD RESOLVED
325252 6 PENDING
555555 6 PENDING
325235 3 SEC RESPONDED
555555 1 NEW
This is the data I want...
Call_id Call_Status
555555 3 3RD RESPONDED
555555 6 PENDING
555555 7 3RD RESOLVED
The call_id could be any number, I only want the 6 PENDING rows where there are other rows for that call_id which have either 3 3RD RESPONDED or 7 3RD RESOLVED. If someone knows how it would be a great help.
Cheers,
Chris
View 1 Replies
View Related
Mar 25, 2008
Does anyone have any idea how to construct a select statement querying a temp table that contains the following data:
Code|Jan-Apr| May-Aug| Sep-Dec
----------------------------------------
ABCD|250.00|NULL|NULL
ABCD|NULL |889.56|NULL
ABCD|NULL |NULL|1233.67
... that will merge the results as follows?
Code|Jan-Apr| May-Aug| Sep-Dec
----------------------------------------
ABCD|250.00| 889.56| 1233.67
Your help would be greatly appreciated!
Thanks.
View 3 Replies
View Related
May 10, 2015
Here is some data that will explain what I want to do:
Input Data:
Part ColorCode
A100 123
A100 456
A100 789
B100 456
C100 123
C100 456
Output Data:
Part ColorCode
A100 123;456;789
B100 456
C100 123;456
View 4 Replies
View Related
Apr 18, 2006
i have 2 fields name_last , name_first
when i use the query ,
Select name_last , name_first from members order by 1,2
i get the values..
Now I want to merge the fileds and show in a single column like Name_last , Name_first
ie ::
Select name_last , name_first from members order by 1,2 =
Col1 Col2
Aagersen Kevin
Select name_last " , " name_first from members order by 1,2 =
ColumnMerge1
Aagersen , Kevin
View 7 Replies
View Related
May 24, 2007
Hi,
I am new to SSIS.I am doing a left outer jon using the merge join.The output was wrong.I realised that may be we have to trim the key values.But when i do the trim in the derived column,the output of the derived columns shows that issorted is becoming false and the sort key position has become 0.So the merge join is showing error.How can i solve this error.
Please help.
View 1 Replies
View Related
Jul 25, 2014
I am trying to build a SQL select query, but am struggling a little bit.I have a table with multiple inventory transactions, each with an ID and weight.
For example:
proc_packxacts
--------------
ID SysProg Weight
210359 271 986
210359 238 985
210359 61 984
210359 5 983
954679 271 1000
354852 271 568
354852 238 523
354852 59 521
354852 5 520
What I want to do is write a SQL query that returns records where there is a transaction for SysProg = 238, but return the weights for some of the other transactions in columns on the same row.Basically, from the above data set, what I would like to return is:
ID Weight (271) Weight (238) Weight (61 or 59)
210359 986 985 984
354852 568 523 521
How to start this?
View 2 Replies
View Related
Jul 23, 2005
I want to create a stored procedure that will merge columns from tworows that contain duplicated contacts.I have can easily identify the duplicates and extract the UniqueIDs asparameters, but I can't figure out how to construct the actual updateSQL.@KeeperID int,@DupeID intUpdate ContactsSETa.Info1 = LEFT(TRIM(IsNull(a.info1,'') + ' ' IsNull(b.Info1,''))255),a.Info2 = LEFT(TRIM(IsNull(a.info2,'') + ' ' IsNull(b.Info2,'')),255),etc, etc...FROM(here's what I can't figure out)Contacts a ID = @KeeperIDContacts b ID = @DupeID
View 2 Replies
View Related
Dec 20, 2007
Hi
I have an old db I'm converting with SSIS.
In the old db I have an Log-table wich is in this format:
ID,CaseID,Note
each CaseId can have several rows.
Now I want to merge the Note Row into one row based on the CaseID.
So that I get One Row per CaseID with one bignote.
I have been looking into Pivot, but just dont seem to get it working.
Any Ideas?
View 2 Replies
View Related
Aug 29, 2006
Hi Guys,
Can anyone please explain and show an example of how to merge data from one row to another using in SQL 2000
thanks in advance
View 4 Replies
View Related
Apr 6, 2008
I have 3 input sources, date, name and text. What SSIS transformation could I use to merge these 3 rows into one single row. Example:
10/16/2007
John Doe
Text.......................................
Result wanted :
10/16/2007 John Doe Text.......................................
Thank you so much fro your help.
Tara
View 9 Replies
View Related
Aug 2, 2006
I am writing a database system which recieves information parsed from various data formats. These data formats may or may not be complete, and as such some rows in the database can have gaps.
The input formats may contain reference to the same row (in this case the same Company record) but hold different facts about that company.
Eg one message may have name, phone and fax, whereas another message may contain name, address and website.
I need to be able to insert new companies into the database OR update current records with extended data as relevant, ive been looking for UPSERT or MERGE queries in SQL Server but i cant find any useful resources explaining its use.
Alternativly i'd like to be able to condense potential duplicates into single rows, eg:
NamePhoneEmailnullNamePhonenullWebsite
which would combine into one row where the null values get set by values derived from other similar rows:
Name PhoneEmailWebsite
Any help at all would be really appreciated
Thanks,
Toby
View 6 Replies
View Related
Sep 24, 2015
I have a table that has columns like following
trans_code
gl_code
12qw3
a1235
12qw3
a6578
12qw3
t531
e34g6
gt25
e34g6
y7327
e34g6
v23409
Is there an easy way to turn this into format below ??
trans_code
gl_code_1
gl_code_2
12qw3
a1235
a6578
12qw3
a1235
[code]....
View 5 Replies
View Related
Sep 28, 2007
Hi all! Hope you can help us with this one. We installed SP 2 of Sql server 2005 few months ago, and that caused a strange problem with merge replication.
We have about 150 subscribers in one merge publisher, and 200.000 new rows generated each day (retail system). Most tables are filtered.
Replication and filtering works fine, except 0,1% --> 0,2% of rows are not replicated correctly. These "problem-rows" are always replicated correctly to the publisher database, but publisher can't always replicate these rows further to other subscribers. Before SP2 everything worked fine.
Same problem occurs with filtered and non-filtered tables.
SQL Server shows no errors or warnings, everything SEEMS to work fine.
We have to make "dummy"-updates (like update SALES set id=id) in publisher database, to wake up the replicator. And always after these dummy updates all problem-rows will be replicated correctly from the publisher to subscribers.
Why do we have to "wake up" the replicator time to time with dummy updates? Is there a bug in SP2?
View 3 Replies
View Related
Apr 24, 2008
Hi,
I have a problem with a Merge Join providing no output (when it should have 1890 rows). My Data Flow Task has 4 OLE Data Sources, 3 Multicasts, and 1 OLE Data Destination. I am experiencing the problem near the end of my data flow where two Multicasts create two parallel flows of data (see Level 1 below). I have two Merge Joins which join one leg from each multicast with a leg from the other multicast (see Level 2 below). Then the two remaining legs use a Merge to get my destination output (see Level 3 below).
I am experiencing my problem with the Merge Join (input A2, B2) --> (output C2) transformation. The Merge Join providing output C1 appropriately outputs 1890 rows, but C2 outputs 0 rows. Both Merge Joins are identical. The data is identically sorted prior to entering the problematic Merge Join and a DataViewer (Grid) verified that the data is appropriately entering in. Merge Join (input A2, B2) --> (output C2) has 667 rows as input A2 and 1890 rows as input B2 (using an inner join, just like the other merge join), but C2 baffles me with 0 rows of output (when it too should have 1890). I receive no Ouput errors and the execution completes showing all green.
Level 1
Multicast (output A1, A2) [667 rows]
Multicast (ouput B1, B2) [1890 rows]
Level 2
Merge Join (input A1, B1) --> (output C1) [1890 rows]
Merge Join (input A2, B2) --> (output C2) [0 rows]
Level 3
Merge (input C1, C2) --> (output D1) [1890 rows]*
I read about mysterious behavior with Merge Joins and have attempted modifying my EngineThreads property to values between 2 and 10, with no luck. Any help/ideas would be appreciated.
Thanks,
Devin
* Should be 3780 rows
View 4 Replies
View Related
May 13, 2008
Hi,
I have two tables of news feed NewsHeader & NewsDetails
NewsHeader:
Time Header
10:15:34 AM News1
10:15:34 AM News1
10:15:34 AM News1
11:19:39 AM News2
11:19:39 AM News2
12:35:04 PM News3
12:35:04 PM News3
NewsDetails
Time Text RowC
10:15:34 AM ABC 1
10:15:34 AM DEFG 2
10:15:34 AM HIJKL 3
11:19:39 AM AABB 1
11:19:39 AM CCDD 2
12:35:04 PM ZZYY 1
12:35:04 PM XXWW 2
Required Output
Time Header Text
10:15:34 AM News1 ABCDEFGHIJKL
11:19:39 AM News2 AABBCCDD
12:35:04 PM News3 ZZYYXXWW
Thank you.
View 2 Replies
View Related
Jun 2, 2015
I'm trying to use merge data from a staging table to a production table. There are a lot of duplicate values for serverName and I only want to insert one instance where there are duplicates.
How I can adapt the code I have so far to achieve this?
MERGE tblServer AS TARGET
USING tblTemp AS SOURCE
ON (TARGET.serverName = SOURCE.serverName)
WHEN MATCHED THEN
UPDATE SET TARGET.serverName = SOURCE.serverName, TARGET.serverLocation = SOURCE.serverLocation
WHEN NOT MATCHED BY TARGET THEN
INSERT (serverName, serverLocation)
VALUES (SOURCE.serverName, SOURCE.serverLocation)
WHEN NOT MATCHED BY SOURCE THEN
DELETE;
View 3 Replies
View Related
Nov 26, 2014
basically i have data like this
order_key comment
1 A
1 B
1 C
2 B
2 D
the data intends to be like this
order_key comment
1 A,B,C
2 B,D
View 3 Replies
View Related
Dec 24, 2014
I have a table that looks like this ...
idtype_codephone_num
11111-111-1111
12222-222-2222
21111-111-1111
32222-222-2222
I want to merge the data to look like this ...
idphone1 phone2
1111-111-1111222-222-2222
2111-111-1111NULL
3NULL222-222-2222
Basically if the type code is 1 one then move the data to column phone1, if the type is 2 then move it to column phone2.
This would be fairly simple if we always have type codes 1 and 2. But sometimes we can have type 1 and not type 2, or we could have type 2 and not type1.
Right now we only have 2 type codes. But, in the future we could be adding a 3rd type. So that would add a 3rd column (phone3).
Below is my code that I have written. I move the data into a temp table then list it. I am thinking of making this a view to my table. It works just fine. My question is, is there a better and more efficient way of doing this?
CREATE TABLE #Contacts (
id INT PRIMARY KEY,
phone1 VARCHAR(15),
phone2 VARCHAR(15)
)
-- Insert the records for type 1
INSERT INTO #Contacts
SELECT id,
phone_num,
NULL
FROM test1
WHERE type_code = '1'
-- Insert the records for type 2, if the id does not exist for type 1
INSERT INTO #Contacts
SELECT id,
NULL,
phone_num
FROM test1
WHERE NOT EXISTS (
SELECT 1
FROM #Contacts
WHERE #Contacts.id = test1.id
)
AND test1.type_code = '2'
-- if the id has both type 1 and 2, update the phone2 column with the data from type 2
UPDATE #Contacts
SET phone2 = test1.phone_num
FROM #contacts
JOIN test1 ON test1.id = #Contacts.id
WHERE type_code = '2'
SELECT id, phone1, phone2
FROM #Contacts
DROP TABLE #Contacts
View 2 Replies
View Related
Jul 8, 2015
I've a requirement where I need to merge multiple rows in single rows. For example in the attached image output, I need to return a single column for type Case like this.
CH0, CH1, CH2, CHX Case
CM0, CM1, CM2, CMX Mechanical
I'm using T-SQL to generate the column type. Below is my DDL.
USE tempdb
GO
CREATE TABLE ProdCodes
(Prefix char(8),
Code char(5)
[Code] ....
View 7 Replies
View Related
Aug 23, 2006
I am running a simple merge replication in SQL Server 2000. I have one database that is the publisher, and a second database that is the subscriber. When I add a new row to the subscriber it will replicate to the publisher as expected. However, the new row at the subscriber will then be deleted without explanation. The row will remain at the publisher though.
Does anyone know why it is doing this?
View 8 Replies
View Related
May 26, 2007
We are running merge replication, SQL Server 2005 Enterprise with SQL Mobile 2005 (Windows Mobile 5) subscribers. Partitions are filtered on HOST_ID.
Ocassionally we experience a situation where a subscriber experiences an unusually long synchronization duration, and upon examining Replication Monitor, it appears that twice the number of rows, or X the number of rows (up to 7 times the number of rows) that should have been inserted are recorded as synchronized for the session: once the normal amount as inserts and once the normal amount as updates. This occurs for all tables in the subscription. This occurs on a first time synchronization to an empty subscriber database where there should be only inserts taking place.
I have examined the snapshot partition folders for these users on the file system and they appear to be identical in size and content as other subscribers. Checking the last partition snapshot job run and other characteristics for the the subscriber in question, everything appears to be the same as other subscribers functioning normally.
The HOST_ID for us is an employee ID used to filter employee specific data. I have seen this happen if the subscriber changes the value for the HOST_ID used in filtering, after the mobile database has already been populated (2 employees attempt to use the same mobile device and database). But, we have seen this happen recently where the HOST_ID was apparantly never changed midstream.
This just started happening recently. The only modification around the same time frame was the implementation of a custom business logic handler/custom conflict resolver that performs like "Latest Wins" but has logic added to update the a last-update datetime column for selected transaction tables at time of synchronization, so that an SSIS job can detect the changed rows for copying incremental database changes to another application database. This all seems to be working perfectly.
Any ideas?
Thanks,
Matt
View 1 Replies
View Related
Jul 8, 2015
I've a requirement where I need to merge multiple rows in single rows. For example in the attached image output, I need to return a single column for type Case like this.
CH0, CH1, CH2, CHX Case
CM0, CM1, CM2, CMX Mechanical
I'm using T-SQL to generate the column type. Below is my DDL.
USE tempdb
GO
CREATE TABLE ProdCodes
(Prefix char(8),
Code char(5)
[code]....
View 2 Replies
View Related
May 21, 2015
How to summarise the data in this table to a single row output per site (2 records for every SiteID). I am based in the UK so the data copied from SQL is in the US format. I can convert this to UK date without any issues.
CREATE
TABLE [dbo].[MRMReadings](
[SiteIncomeID] [int] IDENTITY(1,1)
NOT NULL,
[SiteID] [nchar](5)
NOT NULL,
[Code] ....
Is it possible to return the data in the following format merging 2 lines of data into one output:
SiteID ReadStartDate ReadEndDate ReadStartIncome ReadEndIncome
L0020 19/05/2015 05:00 20/05/2015 05:00 85.98 145.98
L0101 19/05/2015 22:07 20/05/2015 22:14 1,936.08 1,438.89
L0102 20/05/2015 21:16 19/05/2015 21:48 143.65 243.5
I am using SQL 2008 R2.
View 12 Replies
View Related
May 13, 2015
I have a set of data which contains individual logon and logoff data. The table is as follows:
AGENTID, EVENTTIME, CURRENTSTATE
1234, 2015-05-12, 15 (For Logon) or 25 (For Logoff)
I'm hoping to extract this data as follows:
AGENTID, LOGON DATE/TIME, LOGOFF DATE/TIME, DURATION
View 19 Replies
View Related
Aug 22, 2012
I use the merge statement in a sproc to insert, update and delete records from a staging table to a production table.
In the long sql, here is a part of it,
When Matched and
((Student.SchoolID <> esis.SchoolID
OR
Student.GradeLevel <> esis.GradeLevel
OR
Student.LegalName <> esis.LegalName
OR
Student.WithdrawDate <> esis.WithdrawDate
Student.SPEDFlag <> esis.SPEDFlag
OR
Student.MailingAddress <> esis.MailingAddress)
Then update
Set Student.Schoolid=esis.schoolid,
.....
My question is how about if the column has null values in it.for example
if schoolID is null in production table is null, but in staging table is not null, will the <> return true.or if either side of <> has a null value, will it return true.
I don't want it to omit some records and causing the students records not get updated.If not return true, how to fix this?
View 9 Replies
View Related
May 8, 2006
Hello,
We have a couple of tables that can have quite a bit of data each day prior to replication. Can we increase the default values for a table for each subscription? For example we have a table called table1 and on the sqlexpress client they could enter in 10000 rows a day, on table2 it's just 100 rows a day. How can we increase the values to where we do not get the error for table1 stating that the insert failed because it conflicted with the identity range check constraint. Thanks in advance.
View 1 Replies
View Related
Jan 3, 2008
C# .Net Application as front end
Sql Server2000 as back end
I need to merge an external dataset from .Net app(in XML format) with the information in database with one column in database table as the merging criteria. A situation similar to Left Outer Join, wherein i need all records from external dataset and if matched in database the corresponding values from there too, the only difference here is that the join is not between two Tables its between a table and external dataset.
There is no need to store the external dataset in the database in persistent form, its just a query - merge - response operation.
So, can anyone suggest the best possible solution for this? A table variable / temporary table / some other schema, what and how?
Thanks in advance..
View 8 Replies
View Related
Nov 6, 2006
Hi
I'm working with merge replication between Sql Server 2005 and Sql Server 2005 Mobile. I'm using dynamic filtering by function HOST_NAME (... where Table.FilteredColumn = HOST_NAME())
When I'm trying to chagne values from filtered column on the client side (Table.FileteredColumn) I get error message that the column is read-only.
How can I change data in filtered column? Is this possible?
View 3 Replies
View Related
Jan 25, 2008
I have a pivot transform that pivots a batch type. After the pivot, each batch type has its own row with null values for the other batch types that were pivoted. I want to group two fields and max() the remaining batch types so that the multiple rows are displayed on one row. I tried using the aggregate transform, but since the batch type field is a string, the max() function fails in the package. Is there another transform or can I use the aggragate transform another way so that the max() will work on a string?
-- Ryan
View 7 Replies
View Related
