MergeSynchronizationAgent Status Event
Dec 27, 2005
Hi,
I am attempting to use the MergeSynchronizationAgent Status event to display the current status of the synchronization in a dialog. It seems that the StatusEventArg properties returned to the StatusEventHandler from the MergeSynchronizationAgent don't match the acutal progress - for intance, the PercentComplete always stays at 0 and the MessageStatus never is "Succeed" for a successful web sync, so it is impossible to tell if the synchronization is complete or not. Is there another way to check the current status of a synchronization in code? I am developing in C#, using RMO for SQLExpress 2005.
Thanks,
Darrell Young
View 3 Replies
ADVERTISEMENT
Jun 29, 2007
I'm trying to perform merge replication synchronization via RMO programming as shown in the following topic on MSDN:
http://msdn2.microsoft.com/en-us/library/ms147890.aspx
But this piece of code raises an error message telling there is no such property inside the subscription object
Code Snippet // Synchronously start the Merge Agent for the subscription.
subscription.SynchronizationAgent.Synchronize();
The "SynchronizationAgent" property is of type "MergeSynchronizationAgent" as the books online says but there is no such type in the namespase "Microsoft.SqlServer.Replication".
I'm using microsoft sql server 2005 sp2 and .net framwork 2.0 and I properly added the refrence to Microsoft.SqlServer.Replication
View 2 Replies
View Related
Mar 31, 2006
I am using the exactly same sample code on http://msdn2.microsoft.com/zh-cn/library/microsoft.sqlserver.replication.mergesynchronizationagent.synchronize(SQL.90).aspx to synchronize a push subscription and get this error while executing the statement:
subscription.SynchronizationAgent.Synchronize();
I even added a [STAThread] attribute on the method but still no luck, anybody can share a light on it? Thanks!
mengruts
View 7 Replies
View Related
Dec 22, 2006
I've seen a few posts in the MSDN documentation (see links below) stating that the MergeSynchronizationAgent no longer requires the STA threading model in SQL Server 2005 SP1. However, I'm still receiving the following exception message in my synchronization code (where it attempts to access the SynchronizationAgent property):
The MergeSynchronizationAgent class must be instantiated on a Single-Threaded Apartment (STA) thread.
I have Service Pack 1 for SQL Server 2005 installed on both my server as well as my local client (the client is running SQL Server 2005 Express). How can I verify the correct files are there (e.g. are the some specific date/time values for the RMO/COM objects?
Here's the list of MSDN links mentioned above:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=326837&SiteID=1
http://msdn2.microsoft.com/en-us/library/ms146869.aspx
http://msdn2.microsoft.com/en-us/library/microsoft.sqlserver.replication.mergesynchronizationagent.aspx
http://msdn2.microsoft.com/en-us/library/microsoft.sqlserver.replication.mergepullsubscription.synchronizationagent.aspx
View 3 Replies
View Related
Jun 2, 2015
Recently we migrated our environment to 2012.
We are planning to implement Xevents in all the servers in place of Trace files and everything is working fine.
Is it possible to configure Extended event to trigger a mail whenever any event (example dead lock) occurs.
I have gone through so many websites but i never find.
View 13 Replies
View Related
Oct 25, 2011
My SQL Server 2005 SP4 on Windows 2008 R2 is flooded with the below errors:-
Date 10/25/2011 10:55:46 AM
Log SQL Server (Current - 10/25/2011 10:55:00 AM)
Source spid
Message
Event Tracing for Windows failed to send an event. Send failures with the same error code may not be reported in the future. Error ID: 0, Event class ID: 54, Cause: (null).
Is there a way I can trace it how it is coming? When I check input buffer for these ids, it looks like it is tracing everything. All the general application DMLs are coming in these spids.
View 2 Replies
View Related
Apr 8, 2008
I have been testing with the WMI Event Watcher Task, so that I can identify a change to a file.
The WQL is thus:
SELECT * FROM __InstanceModificationEvent within 30
WHERE targetinstance isa 'CIM_DataFile'
AND targetinstance.name = 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Backup\AdventureWorks.bak'
This polls every 30 secs and in the SSIS Event (ActionAtEvent in the WMI Task is set to fire the SSIS Event) I have a simple script task that runs a message box).
My understanding is that the event polls every 30 s and if there is a change on the AdventureWorks.bak file then the event is triggered and the script task will run producing the message.
However, when I run the package the message is occurring every 30s, meaning the event is continually firing even though there has been NO change to the AdventureWorks.bak file.
Am I correct in my understanding of how this should work and if so why is the event firing when it should not ?
View 2 Replies
View Related
May 31, 2007
Server 2003 SE SP1 5.2.3790 Sql Server 2000, SP 4, 8.00.2187 (latest hotfix rollup)
We fixed one issue, but it brought up another. the fix we applied stopped the ServicesActive access failure, but now we have a failure on MSSEARCH. The users this is affecting do NOT have admin rights on the machine, they are SQL developers.
We were having
Event Type: Failure Audit
Event Source: Security
Event Category: Object AccessEvent ID: 560
Date: 5/23/2007
Time: 6:27:15 AM
User: domainuser
Computer: MACHINENAME
Description:
Object Open:
Object Server: SC Manager
Object Type: SC_MANAGER OBJECT
Object Name: ServicesActive
Handle ID: -
Operation ID: {0,1623975729}
Process ID: 840
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: MACHINE$
Primary Domain: Domain
Primary Logon ID: (0x0,0x3E7)
Client User Name: User
Client Domain: Domain
Client Logon ID: (0x0,0x6097C608)
Accesses: READ_CONTROL
Connect to service controller
Enumerate services
Query service database lock state
Privileges: -
Restricted Sid Count: 0
Access Mask: 0x20015
Applied the following fix
http://support.microsoft.com/kb/907460/
Now we are getting
Event Type: Failure Audit
Event Source: Security
Event Category: Object Access
Event ID: 560
Date: 5/23/2007
Time: 10:51:23 AM
User: domainuser
Computer: MACHINE
Description:
Object Open:
Object Server: SC Manager
Object Type: SERVICE OBJECT
Object Name: MSSEARCH
Handle ID: -
Operation ID: {0,1627659603}
Process ID: 840
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: MACHINE$
Primary Domain: domain
Primary Logon ID: (0x0,0x3E7)
Client User Name: user
Client Domain: domain
Client Logon ID: (0x0,0x60D37C1A)
Accesses: READ_CONTROL
Query service configuration information
Query status of service
Enumerate dependencies of service
Query information from service
Privileges: - Restricted Sid Count: 0 Access Mask: 0x2008D
View 4 Replies
View Related
Nov 2, 2007
Hi all,
Can we get the event properties by using a query?
Are there any extended stored procuder to get the above?
Scenario:
>Desktop>Right Click on My Computer
>Go to Manage and click
>Expand System Tools
>Expand Event Viewer
>Application
click on one event.We can get the log info which is the manual procudure.
But now i want to get the event properties through the Query analyzer...
Any help would be great?
Thanks,
View 4 Replies
View Related
Oct 22, 2007
We recently upgraded to SQL 2005 from SQL 2000. We have most of our issues ironed out however about every 1 minute there is a message in the Application Event log and the SQL log that states:
EVENT ID 18456 Login Failed for the users DOMAIN/ACCOUNT [CLIENT: <local machine>]
This is a state 16 message which I thought meant that the account does not have access to the default database. The account is actually the account that the SQL services run under.
Any ideas? We can't seem to figure this one out. We actually upgraded to 2005 from 2000 and had an error appear after every reboot that prevented the SQL Agent from running(This application has failed to start because GAPI32.dll was not found. Re-installing the application may fix this problem.) We did a full uninstall of SQL and reinstalled fresh and restored the databases from .bak files and that is when the EVENT ID 18546 started occuring every minute.
We don't have any SQL heavy hitters here so please be detailed with any possible solutions. That you very much for any help you can provide!
David
View 5 Replies
View Related
Jan 7, 2008
Hi Experts,
I am extracting data from SQL Server 2005 to flat file destination. I am using SQL Command to specify the data selection query. One of my query uses Replicate function to derive a column value. When I execute this package it fails with the error "Data conversion failed. The data conversion for column "value" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page".
The reason for the problem is that, it is taking the InputColumnWidth of the flat file destination as 8000 and I specified the OutputColumnWidth as 4.
If I change the OutputColumnWidth to 8000, it is working without any error but resulting in the column width of 8000.
I tried using DerivedColumn Transformation's Type cast and DataConversion Transformation but still I am getting the same error in the respective Transformation components.
Can anyone suggest how to solve this issue.
View 11 Replies
View Related
May 3, 2005
Returning "completed" when status = 1 and "not completed when status = 0
View 3 Replies
View Related
Aug 28, 2002
SQL7, sp3, NT4...
Unless I grant a developer "system admin" role, they are unable to see whether or not any job *not* owned by themselves is running?
EX: Developer A can't see whether Developer B's job is executing? Why? I've granted them both db_owner in msdb, and all permissions possible in msdb. Is there an extended sp I can look for?
Thanks,
View 1 Replies
View Related
Mar 4, 2004
Hi Gurus,
can any one help me to get the job status of a sql job.
My requirement is as under
ordinary user (not SA) will query pass job name as argument to stored procedure and sp has to give me the job status.
Thanks in advance
View 1 Replies
View Related
Jul 23, 2005
I have a table with columns c1, c2, c3, c4.if all nulls or blanks. Status = 0if c1 assigned but no c2, c3, and c4, then status = 1if c2 assigned but no c3 and c4, then status = 2if c3 .. then ..if c4 .. then ..I want to have one SQL to get the status like (ignored checking forblanks here for demo)SELECT Status = (if not c4 is null then 4else not c3 is null then 3else not c2 is null then 2else not c1 is null then 1else 0)FROM mytable.Thought of using CASE ... WHEN ... but it is only on one colum.Any better idea.ThanksJohn
View 1 Replies
View Related
Sep 25, 2006
In SQL 2000, go to Management, than Jobs, you will see a list of all jobs and their running status. I would like to programmatically display the same on my web page. I can call sysjobs table to get the jobs and use sysjobschedules to determine whether it's been scheduled or not. Then use sysjobhistory to obtain their running history. But how and where do I get the Next Run Date information? Is this calculated or stored somewhere?Can anyone give me some help on how to work with sysjobs, sysjobschedules, and sysjobhistory tables? All I am trying to do is to build a web-based app that does the same thing as the Enterprise Manager is doing - create and schedule a job, and monitor the job status.Thanks a lot!Penn
View 1 Replies
View Related
Sep 1, 2007
Hi all - am having trouble working out what would be the best way to do this (most efficient)I have written an order, despatch and accounts system. To get a list of orders ready for despatch, I have written a query which calculates the amount of items ordered against the amount of items despatched from that order. If there are any outstanding items, then this order is in the list of orders which are outstanding for despatch.
I am having trouble working out how to go about creating a list of orders ready do be invoiced... Orders that are ready to be invoiced can be completely despatched orders or part despatched orders. That is to say that if an order is only half despatched, my client still wants to be able to raise an invoice against that part of the order. I envisage creating a query which checks my orderline table to see if the item has been invoiced and creating the list from there. But as the application is used more and more, this query will take longer to run? ANy ideas?
Thanks.
Steve.
View 1 Replies
View Related
Jul 9, 2001
Hello,
Can anyone guide me to monitor whether Production Sql server is up and running and would e-mail or page me if by chance it has stopped.
Any help is appreciated.
Thanks.
Priti
View 5 Replies
View Related
Jun 24, 2000
is there any way to make the status of a package execution to be success without caring about failure of certain steps in the package?
View 1 Replies
View Related
Sep 26, 2002
I need to know the meaning of the status bit in sysdatabases because BOL only reports some of them.
For SQL 7.0 SP1 I have some database with a status bit equal to 0 (zero) and equal to 12.
For SQL 2000 SP2 I have some database with a status bit equal to 0 (zero),24,20 and 1073741840.
So I would really appreciate if someone can explain the meaning of these status bits.
Thank you very much.
Franco
View 2 Replies
View Related
Apr 14, 2003
Hi,
Is there any way to update the status bar in Query Analyzer.
Suppose I am running a script which updates data to a file. I want to know the status showing the percentage it completed.
Thanks
:confused:
View 1 Replies
View Related
Jun 8, 2007
I just started working with MS SQL. I'm attempting to find the equivalent of the MySQL commands STATUS and SHOW STATUS.
Essentially, I want to connect to the database from a .net app, check the status, such as how many connections, table locks, errors, etc... and display that information on my application.
Any recommendations?
View 5 Replies
View Related
Jun 27, 2004
I have a question I hope someone can help me with.
My situation:
I have a single-step job in SQL Server, which runs a stored procedure, A. This stored procedure invokes another stored procedure, B. In B, one of the statements is a 'BACKUP DATABASE' command, and a database is backed up to a file.
The job is started by an application. Once started, the application then uses the SQL-DMO property CurrentRunStatus to periodically check the status of the job. When the property returns the value SQLDMOJobExecution_Idle (indicating the job has completed), the application code then continues processing, and attempts to access the .dat file produced by the 'BACKUP DATABASE' command.
My problem:
On occasion, the application will hit the problem where either the backup file cannot be located, or the file is still being locked by another process (Error=The process cannot access the file because it is being used by another process).
Is anyone able to shed some light on this?
I assume that the job will only return a completed status after:
(a) both A and B have completed execution, and
(b) the BACKUP operation has completed
Is it possible that even though SQL Server indicates the job has finished, that the BACKUP operation still hasn't completely ended?
Thanks for any help,
Andrew
View 2 Replies
View Related
Mar 27, 2008
Hi
My boss and I have recently started designing a new database, and we've got into a bit of a debate about creating status tables (e.g. order statuses).
It was my intial instinct to create a separate table for each kind of status (e.g. an OrderStatuses table, a JobStatuses table, etc), however my boss wanted to create one table containing all the statuses, with an extra field for defining what kind of status it is.
I was just wondering what others thought was the best approach.
Thanks
Tom
View 5 Replies
View Related
Jun 3, 2008
Hi Gurus,
While iam connecting to servers through management studio iam facing
iam seeing like few servers are connected with Green colour (like>)and few are connected with circle as white.Frm these how can i decide the server status.
Is there any comand to view server status ?
Thanks,
ServerTeam
View 3 Replies
View Related
Jun 5, 2008
Hello All,
Can someone help me with this query?
I have the following table and data structure
Table1: Orders
Field1: OrderID
Table2: OrderStatus
Field1: OrderStatusID
FIeld2: OrderID
Field3: StatusID
Field4: InsertDate
Sample Data:
Table1:
11
12
Table2:
1,11,1,6/1/2008
2,12,1,6/1/2008
3,11,2,6/2/2008
4,12,2,6/2/2008
5,11,3,6/3/2008
6,11,4,6/4/2008
Wanted Results:
11,4,6/4/2008
12,2,6/2/2008
View 3 Replies
View Related
Jul 16, 2013
How can i exclude those with more than one status? i tried using rows but it seems doesn't work.
ID status
1 new
1 new
1 close
2 new
2 close
3 close
3 close
4 new
4 close
the result should appear as:
ID status
2 new
2 close
4 new
4 close
View 4 Replies
View Related
Mar 7, 2015
I have a table of status_Master where the details are maintained by street name with status but I need the result of total count by each status against the street name.
Status_Master
Sl NoStreetNameStatus
1 Delhi Pending
2 Delhi Working
3 Delhi Working
4 Mumbai Pending
5 Mumbai Pending
6 Delhi Working
7 Delhi Problem
8 Mumbai Working
9 Mumbai Problem
50 . .
100 . .
200 . .
Result as below
StreetNameWorkingPendingProblem
Delhi 3 1 1
Mumbai 1 2 1
View 2 Replies
View Related
May 12, 2006
table1 has 3 fields:
bookNumber
123
234
345
status -- status defaul value is 0
partnerNumber
1
2
3
table 2 has 2 fields
bookNumber
234
345
567
789
partnerNumber
1
2
3
4
A stored procedure named remove_books, which remove books if the conditions are true.
If stored procedure is executed. That means, it removes the bookNumbers from table2 if the conditions are true. Lets say it removes 234 from table2
then
do update in table1 status = 1 for BookNumber 234.
View 19 Replies
View Related
Aug 6, 2007
I need to know how can i see the replication status. I have 4 servers with ms sql 200 standard server and hundreds of commnad to replicate. Sometime is important to know how mush of this commnads is replicated.
Thank You.
View 10 Replies
View Related
Sep 9, 2007
T-SQL for checking which jobs are currently running ?
And
what happen if index rebuild job overlap with shrink log file job
Is database wont allow to insert or update for other application
Thanks in Advance
Dina Satam
View 1 Replies
View Related
Sep 25, 2007
Hi All,
Using SQL Server 2005 w/ SP2 I have a simple select query with a parameterized WHERE clause that in Management Studio runs nearly instantly, everytime. Using the same login, when I run the same query using SQL RS the results (only 6 rows) takes upwards of 5 minutes. If I look at the Activity Monitor, it shows the process as suspended and indicates a CXPACKET. Everything I have read on the forums about this indicate it is an issue with not having SP2 , which I do. Or a 64 bit version, I have 32. Or for large bulk updates, I am doing a very simple select. Does anyone have any clue on this?
regards
Bill
View 3 Replies
View Related
Jun 28, 2006
Hi everyone,
while executing sp_who sub directory, I see a column which makes me totally confused. This column is status column.
I understood nothing about its usage. So would you please inform me ?
Thanks
View 1 Replies
View Related
