I'm trying to use the message queue task in SSIS 2005 and not getting very far. Right off the bat I'm trying to create a Message Queue Connection Manager and when I enter the path, trying both "seawxxxx estq" (my local computer name) or ". estq" and test it, it comes back with "invalid path". Have done quite a bit of searching around and can't find anything on this particular error.
Suggestions? Thanks in advance.
In the following code, I received an error on
execInfo = rsReportExec.LoadReport(strReportPath, strHistoryID). The errro was "System.Web.Services.Protocols.SoapException: The path of the item "http://localhost/ReportServer/Pages/ReportViewer.aspx?/CAITReports/rptIssuesByRole&rs:Command=Render&intProjectID=119&nvchrWhoRan=DYW" is not valid. The path must be less than 260 characters long and must start with slash. Other restrictions apply. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InvalidItemPathException: The path of the item "http://localhost/ReportServer/Pages/ReportViewer.aspx?/CAITReports/rptIssuesByRole&rs:Command=Render&intProjectID=119&nvchrWhoRan=DYW" is not valid. The path must be less than 260 characters long and must start with slash. Other restrictions apply.
I copied and pasted the path on the URL and it worked. What did I miss in the code? Why strHistoryID is required as it is nothing? Please refer to http://msdn2.microsoft.com/en-us/library/microsoft.wssux.reportingserviceswebservice.rsexecutionservice2005.reportexecutionservice.render.aspx
Private Sub sExecuteReportingServicesReport()
Dim rsReportExec As ReportExecutionService = New ReportExecutionService
rsReportExec.Credentials = System.Net.CredentialCache.DefaultCredentials
'rsReportExec.Url = "http://localhost/reportserver/ReportExecution2005.asmx"
Dim byteResult() As Byte = Nothing
Dim strReportPath As String = "http://localhost/ReportServer/Pages/ReportViewer.aspx?/CAITReports/rptIssuesByRole&rs:Command=Render&intProjectID=" & Me.cboProject.SelectedValue & "&nvchrWhoRan=" & Session("strEmployeeName")
'Dim strReportPath As String = "/Pages/ReportViewer.aspx?/CAIT/rptIssuesByRole&rs:Command=Render&intProjectID=" & Me.cboProject.SelectedValue & "&nvchrWhoRan=" & Session("strEmployeeName")
Dim strFormat As String = "MSWord"
Dim strHistoryID As String = Nothing
Dim strEncoding As String = ""
Dim strMineType As String = ""
Dim strExtension As String = ""
Dim wrnWarnings() As Warning = Nothing
Dim strStreamIDs() As String = Nothing
Dim execInfo As New ExecutionInfo
Dim execHeader As New ExecutionHeader
rsReportExec.ExecutionHeaderValue = execHeader
execInfo = rsReportExec.LoadReport(strReportPath, strHistoryID)
Dim strSessionID As String = rsReportExec.ExecutionHeaderValue.ExecutionID
byteResult = rsReportExec.Render(strFormat, Nothing, strExtension, strEncoding, strMineType, wrnWarnings, strStreamIDs)
Response.ClearContent()
Response.AppendHeader("content-length", byteResult.Length.ToString)
Response.ContentType = "application/MSWord"
Response.BinaryWrite(byteResult)
Response.Flush()
Response.Close()
End Sub
Thanks.
DanYeung
Ok, im making some progress. So what i have is a Message Queue Task which is bound to a message queue connection manager (which 'tests' ok). The Message Queue Task is set to recieve, variable from string message (declared a variable of type string) and to remove the message from the queue. The output of that task is piped into the data flow task.
The data flow task expands into a XML Source which is configured to get its input from the string i declared in the Message Queue Task and i point the schemas path to an appropriate schema. I then pipe the output of that into a SQL server destination which ive mapped all the columns from the XML message to a table (which the SQL server destination created for me).
It all looks good on paper, and builds properly with no errors etc. There is already a message in the appropriate private queue. When i go to debug it, it just sits on the Message Queue Task node (its yellow) and goes no further. No data is put into the DB. I have put a watcher on the link between the XML Source and the SQL server destination, and can see no data being piped through.
Even if i send another message, the execution of my package doesnt step passed the Message Queue Task. Its just sitting there waiting for something? what? I thought it would block until there was a message on that queue, and then process it if and when it arrives. But it doesnt seem to do that.
Any ideas??
I read on MSDN that you need integration services installed. I have checked and i do, and its running. Is theres something else i need to configure?
Help!
Simple Question.
I have a requirement to read XML Messages from a Remote private MSMQ.
These messages are essentially Database records that will need cleaning up and insterting into a Local Database table.
Is this possible with SSIS?
Would Biztalk be a more suitable tool for this type of process?
If its possible, are there any resources taht can point me in the right direction?
Thanks for your help!
J.
I have a C# application that get data (i.e. select Firstname, LastName from person) to form a DataSet object (i.e. PersonName variable inside my code). Then I want to post this DataSet object into a local private queue (the path is: .privatemyTestQ). Note that I carefully labled the message to be "Variables Message" (as needed per anothre thread discussion here in this forum).
I created a receiving package, in which I want to use SSIS's Message Queue task to retreive the above DataSet object (from C# application). I got failure:
[Message Queue Task] Error: An error occurred with the following error message: "Root element is missing.".
However, As a comparison research, I created another SSIS sending-package. And I used ADO.NET provider to get the same data to store the sull result set in a package-level variable. Then I use Message Queue task to post this variable (i.e. object) to the same private queue above. Then I run my above receiving package. I was successful to read back the messge that I posted from SSIS sending package. (Please note that if I use OLEDB provider for sending package to get data from database, the MSMQ task for sending failed due to serializtion issue for __ComObject. With ADO.NET provider, the result set is represented as a type of DataSet).
I then curiously looked into message body from Computer Management Counsol. I found that message sent from SSIS is in SOAP format while message from my C# application is NOT in SOAP (but only in XML format). Obviously SSIS MSMQ task serialize objects into SOAP format.
Can anyone here please help on how to serialize my DataSet object from my C# app) in compliance with the MSMQ task's spec so that I can read message from Q using SSIS package.
I use Visual Studio 2005 and MSMQ 3.0 version.
Your help is appreciated.
How To Use Message Queue Task In Integration Services
I have a strange situation in an Message queue task in SSIS.
I serialize an object in a C# application and add that to an MSMQ as a string. I also ensure that I set the label to "String Message" so that my Message Queue Task can actually receive the message as a String message to variable.
I created an SSIS package that has an Message Queue listener that feeds into a Script task inside a for-each loop.
For each message that I obtain, I invoke a script task that retrieves the value of the variable and then processes this information.
When I enter the entry into the MSMQ, it goes in perfectly fine (since I also tested retrieving this entry from a C# app). However when I use the same logic on the SSIS package using the Script task, I get junk chinese characters.
Has this happened to anyone else?
Any feedback would be great!
Anup
Here is the code for the script task:
mports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Public Class ScriptMain
Public Sub Main()
Dim statusMessage As String
statusMessage = CType(ReadVariable("ReviewerHealthXmlMessage"), String)
System.Windows.Forms.MessageBox.Show(statusMessage)
Dts.TaskResult = Dts.Results.Success
End Sub
Private Function ReadVariable(ByVal varName As String) As Object
Dim result As Object
Try
Dim vars As Variables
Dts.VariableDispenser.LockForRead(varName)
Dts.VariableDispenser.GetVariables(vars)
Try
result = vars(varName).Value
Catch ex As Exception
Throw ex
Finally
vars.Unlock()
End Try
Catch ex As Exception
Throw ex
End Try
Return result
End Function
Private Sub WriteVariable(ByVal varName As String, ByVal varValue As Object)
Try
Dim vars As Variables
Dts.VariableDispenser.LockForWrite(varName)
Dts.VariableDispenser.GetVariables(vars)
Try
vars(varName).Value = varValue
Catch ex As Exception
Throw ex
Finally
vars.Unlock()
End Try
Catch ex As Exception
Throw ex
End Try
End Sub
End Class
Hello,
I'm using the Message Queuing task to create a local private queue message. Everything works great on a 32 bit machine. When I try this on a 64 bit Itanium Cluster I keep getting the message "Message queue service is not available" in my SSIS log. I've using this string as my path "ClusterNameprivate$QueueName". Does anyone know of any issues with the Message Queue task on 64 bit or a cluster? The Message Queue service is up and running, it doesn't make sense.
Thanks,
Andy
I am working on the SSIS FTP Task that transfer file from one FTP server to local location, rename the file name, and finally transfer the renamed file to another FTP server. So I defined 2 FTP tasks.
For the FTP file receive operation, I need the remote path to be updated by a script and pass to the user define variable. So I set TRUE to IsRemotePathVariable. In the RemoteVariable, I set User::FTPSourcePath where the variable is set in the script with "/DMFTP/filename1.jpg"
For the FTP file send operation, I set TRUE to IsRemotePathVariable. In the RemoteVariable, I set User::FTPDestPath where the variable is set in the script with "/DestFTP/"
After all the setting, the FTP Task box show me the error as "Variable "FTPSourcePath" doesn't start with "/". Another FTP box show me "Variable "FTPDestPath" doesn't start with "/"
Can anyone help me on this problem?? Thanks.
This is the first time I've used SQL Server Integration Services, and I have it installed with SP2 applied on my local machine. I have created a Package, and dropped a Message Queue Task on it. I have pointed the Message Queue Connection Manager at a private queue on my machine. I have set the "Message" property to "Send message", I have changed the message type to "String Message" and entered "Test string" into the StringMessage property. When I execute the package (by clicking the "Start debugging" button on the toolbar), I get the following error message in the Execution Results:
[Message Queue Task] Error: An error occurred with the following error message: "The ServicedComponent being invoked is not correctly configured (Use regsvcs to re-register).".
There is no more diagnostic data that I can see in the Execution Results. Can anyone please explain to me how I can get this working?
Thanks!
Bryan
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
In my SQL Server, I see the below message in the Application Event Viewer
"18265 :
Log backed up: Database: HSD, creation date(time): 2007/01/06(05:05:05), first LSN: 1439:495055:1, last LSN: 1439:496675:1, number of dump devices: 1, device information: (FILE=1, TYPE=DISK: {'D:MSSQLBACKUPHSDHSD_tlog_200707141300.TRN'})."
When I save the application event viewer and open it in another server, I do not see the above message, instead I get the following message:
" Can't find or load message DLL. Message DLL must be in path or in current directory."
Any thoughts to overcome this problem is appreciated.
Thanks
Santhosh
I run SB between 2 SQL servers. In profiler on an initiator side I see next error: 'This message could not be delivered because its message timestamp has expired or is invalid'. For the conversation we use best practice, i.e. target closes a conversation. Target side succeed to close conversation, but initiator still stay in DO (disconnect_outbound).
What is a reasone for the error? What to do?
I see in profiler this error: "This message could not be delivered because its message timestamp has expired or is invalid"
What is a reason for error?
Is it possible to modify the sequence of messages in a SSB queue? Or to create messages so that their sequence is based on a value in the message rather than the order in which they were sent to the queue?
I am trying to determine if SSB will help me solve a situation where BizTalk needs to process a prescribed sequence of messages that may not be received in the correct order. (i.e. I need to resequence the messages). Each message contains a field with the sequence number and also a field identifying the total number of messages in the sequence.
I realise that the Sequential Convoy Aggregrator EAI pattern can potentially provide a solution to this, or even the Sequence Guards pattern by McGeeky, but I guess I was hoping that SSB might provide a slightly more efficient solution(?)
Thanks,
Dan
Hi was wondering whether it is possible to log somewhere outside SB that there are messages in the transmission_queue because the Target queue was disabled.
I was testing this scenario:
try to send messages on a disabled queue and log the problem.
But the transmission_status from the trasmission_queue is always empty.
This is the code that I tried to execute between the send and the commit and after the commit:
WHILE (1=1)
BEGIN
BEGIN DIALOG CONVERSATION .....
SEND ON CONVERSATION ......
if select count(*) from sys.transmission_queue <> 0
BEGIN
set @transmission_status = (select transmission_status from sys.transmission_queue where conversation_handle=@dialog_handle);
if @transmission_status = ''
--Successful send - Exit the LOOP
BEGIN
UPDATE Mytable set isReceivedSuccessfully = 1 where ID = @IDMessageXML;
BREAK;
END
ELSE
raiserror(@transmission_status,1,1) with log;
END
ELSE
BEGIN
UPDATE [dbo].[tblDumpMsg] set isReceivedSuccessfully = 1 where ID = @IDMessageXML;
BREAK;
END
END
COMMIT TRANSACTION;
As I wrote before the @transmission_status variable is always empty and I have the same result even if I put the code after the commit transaction!
Maybe what I'm trying to reach has no sense?
With the event notification I can notify when the queue is disable because the receive rollsback 5 times but what if by mistake the target queue is disabled outside the SB environment? I can I catch it and handle it properly?
Thank you!Marina B
I need to determine the actual date/time that a message was placed on the queue. In my "activated" procedure I want to log this information and pass it along to further processing routines. From what I can tell, the Queue table itself does not have this information captured.
View 4 Replies View RelatedHi Folks,
I've found a pretty good code example on http://www.dotnetfun.com for a Asynchronous Trigger.
I've parsed through the Code, to understand how to wirte my own Async Trigger with a Service Broker, but the Code isn't working! It seems that the stored procedure don't receive the messages in the queue, but the queue get's filled.
MessageType
CREATE MESSAGE TYPE myMsgXML
VALIDATION = WELL_FORMED_XML;
Contract
CREATE CONTRACT myContractANY
(myMsgXML SENT BY ANY)
Queue
CREATE QUEUE myQueue
WITH STATUS = ON,
RETENTION = ON,
ACTIVATION
(
STATUS = ON,
PROCEDURE_NAME = sp_myServiceProgram,
MAX_QUEUE_READERS = 5,
EXECUTE AS SELF
)
Service
CREATE SERVICE myService ON QUEUE myQueue (myContractANY)
Procedure (greped from http://www.dotnetfun.com/)
CREATE PROC sp_myServiceProgram
AS
-- This procedure will get triggered automatically
-- when a message arrives at the
-- Let's retrieve any messages sent to us here:
DECLARE @XML XML,
@MessageBody VARBINARY(MAX),
@MessageTypeName SYSNAME,
@ID INT,
@COL2 VARCHAR(MAX);
DECLARE @Queue TABLE (
MessageBody VARBINARY(MAX),
MessageTypeName SYSNAME);
WHILE (1 = 1)
BEGIN
WAITFOR (
RECEIVE message_body, message_type_name
FROM myQueue INTO @Queue
), TIMEOUT 5000;
-- If no messages exist, then break out of the loop:
IF NOT EXISTS(SELECT * FROM @Queue) BREAK;
DECLARE c_Test CURSOR FAST_FORWARD
FOR SELECT * FROM @Queue;
OPEN c_Test;
FETCH NEXT FROM c_Test
INTO @MessageBody, @MessageTypeName;
WHILE @@FETCH_STATUS = 0
BEGIN
-- Let's only deal with messages of Message Type
-- myMsgXML:
IF @MessageTypeName = 'myMsgXML'
BEGIN
SET @XML = CAST(@MessageBody AS XML);
-- Now let's save the XML records into the
-- historical table:
INSERT INTO tblDotNetFunTriggerTestHistory
SELECT tbl.rows.value('@ID', 'INT') AS ID,
tbl.rows.value('@COL2', 'VARCHAR(MAX)') AS COL2,
GETDATE() AS UPDATED
FROM @XML.nodes('/inserted') tbl(rows);
END
FETCH NEXT FROM c_Test
INTO @MessageBody, @MessageTypeName;
END
CLOSE c_Test;
DEALLOCATE c_Test;
-- Purge the temporary in-proc table:
DELETE FROM @Queue;
END
Send Message in a Update Trigger
SELECT @XML = (SELECT * FROM inserted FOR XML AUTO);
-- Send the XML records to the Service Broker queue:
DECLARE @DialogHandle UNIQUEIDENTIFIER,
@ConversationID UNIQUEIDENTIFIER;
/*
The target Service Broker service is the same
service as the initiating service; however, you
can set up this type of trigger to send messages
to a remote server or another database.
*/
BEGIN DIALOG CONVERSATION @DialogHandle
FROM SERVICE myService
TO SERVICE 'myService'
ON CONTRACT myContractANY;
SEND ON CONVERSATION @DialogHandle
MESSAGE TYPE myMsgXML
(@XML);
-- Let's detect an error state for this dialog
-- and rollback the entire transaction if one is
-- detected:
IF EXISTS(SELECT * FROM sys.conversation_endpoints
WHERE conversation_handle = @DialogHandle
AND state = 'ER')
RAISERROR('Dialog in error state.', 18, 127);
ELSE
BEGIN
--I want to list the queue after the trigger so I disabled
--END CONVERSATION @DialogHandle;
COMMIT TRAN;
END
The Problem is, that the Procedure doesn't even get started! So I tried to receive the Queues manually
WAITFOR (
RECEIVE message_body, message_type_name
FROM myQueue INTO @Queue
), TIMEOUT 5000;
and I run always into the timeout and get nothing back. A Select * FROM myQueue gives me some results back. Why I can't recevie?
Would be grateful for help, or at least a good tutorial, I haven't found one yet....
thx and greez
Karsten
I am implementing a message queue system in SQL Server 2000. My queue table looks something like this:
[MessageId] [uniqueidentifier] NOT NULL,
[MessageType] [uniqueidentifier] NOT NULL,
[Status] [tinyint] NOT NULL,
[SubmittedTime] [datetime] NOT NULL,
[StartTime] [datetime] NOT NULL,
[DispatchedTime] [datetime] NULL,
[CompletedTime] [datetime] NULL,
[MessageData] [image] NULL
This is how I retrieve the next message for processing:
SELECT TOP 1 *
FROM [Queue].[MessageQueue] WITH (ROWLOCK, UPDLOCK, READPAST)
WHERE [StartTime]=@pStartTime AND [MessageType]=@pMessageType AND [Status]=@pStatus
ORDER BY [StartTime]
and mark it as being processed:
UPDATE [Queue].[MessageQueue] SET [Status]=1 WHERE [MessageId]=@pMessageId
After message has been processed I delete it from the queue:
DELETE FROM [Queue].[MessageQueue] WHERE [MessageId]=@pMessageId
All database accesses are transactional with default READ COMMITTED. The problems start when there are a few concurrent accesses: I get deadlocks when retrieving next message. If I do not delete message after processing then there is no deadlock. But this is not what I need.
I played with different isolation levels and locking hints and was able to avoid deadlock using TABLOCKX:
SELECT .... FROM [Queue].[MessageQueue] WITH (TABLOCKX)
But in this case you cannot concurrently retrieve messages which was my goal from the beginning. How do I achieve this?
Thank you,
Alex
I used the DTSmigration wizard to transfer DTS jobs from SQL2000 to SQL2005. The wizard transfered the old DTP packages without error but now I cannot access some of them. The old DTS packages had names of the form <program_name>**<output_type> for example JM-102**excell. When I try to access (or delete) the new packages in SSIS I get the error:
The path is not valid.
Parameter name: packagePath (MsDtsSrvr)
How can I delete these packages?
Hi,
I am using distributed transactions where in I start a TransactionScope in BLL and receive data from service broker queue in DAL, perform various actions in BLL and DAL and if everything is ok call TransactionScope.Commit().
I have a problem where in if i run multiple instances of the same app ( each app creates one thread ), the threads pop out the same message and I get a deadlock upon commit.
My dequeue SP is as follows:
CREATE PROC [dbo].[queue_dequeue]
@entryId int OUTPUT
AS
BEGIN
DECLARE @conversationHandle UNIQUEIDENTIFIER;
DECLARE @messageTypeName SYSNAME;
DECLARE @conversationGroupId UNIQUEIDENTIFIER;
GET CONVERSATION GROUP @conversationGroupId FROM ProcessingQueue;
if (@conversationGroupId is not null)
BEGIN
RECEIVE TOP(1) @entryId = CONVERT(INT, [message_body]), @conversationHandle = [conversation_handle], @messageTypeName = [message_type_name] FROM ProcessingQueue WHERE conversation_group_id=@conversationGroupId
END
if @messageTypeName in
(
'http://schemas.microsoft.com/SQL/ServiceBroker/EndDialog',
'http://schemas.microsoft.com/SQL/ServiceBroker/Error'
)
begin
end conversation @conversationHandle;
end
END
Can anyone explain to me why the threads are able to pop the same message ? I thought service broker made sure this cannot happen?
Hello,
I have almost finished to design my Service Broker application and I found out something strange.
I was tring to handle the Target queue disabled scenario, because I want to save to message that was not sent so I can create an alert to the user to say that some messages as not been sent.
To disable to queue I run:
Alter queue [dbo].[Receivedqueue] with status = off
I had the Event Viewer in front of me and I have seen the suddenly it appeared a lot of this informational events:
Event Type: Information
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 9724
Date: 15/06/2007
Time: 15:00:47
Description:
The activated proc [dbo].[OnReceived] running on queue TestReceiver.dbo.Receivedqueue output the following: 'The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction.'
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
What this message means?
I would like to avoid to have it because it appears a lot of time and I don't want to fill up my Event Viewer!!
I don't know of it is important but in the moment I executed the code there was not CONVERSING conversation and all the queues were empty.
Somebody has seen this error before or I have to send to the forum the [dbo].[OnReceived] code as well?
thankx
Marina B.
Hi
Hopefully someone can help me.
I'm trying to restore my DB to a new server and also a new instance of SQL 2005 SP2+ hotfix KB934458.
I've successfully restored my MSDB database and everything seems to be working fine, but now when I'm trying to do a restore of my Database RMc to the attached SAN,
I'm getting the error:
System.Data.SqlClient.SqlError: The path 'H:' has invalid attributes. It needs to be a directory. It must not be hidden, read-only, or on a removable drive. (Microsoft.SqlServer.Smo)
the H: is the Drive letter for my attached SAN.
The path I'm trying to give is H:\DBData for the MDF-file and the H:DBLog for the LDF-file.
I have the DB running on another server also with a SAN attached and there are no problems.
I also moved the MSDB to another drive on the SAN - a G-drive without any problems.
Is there someone who have a good idea?
TSloth :-)
Hello. I am attempting to add a distribution database to an instance of SQL Server on my local PC. I am using SQL 2005 Developer Edition. I am able to set the instance up as a distributor using the following command:
exec sp_adddistributor @distributor = N'computernameinstancename'
I use the following command to create the distribution database:
exec sp_adddistributiondb @database = N'distribution', @data_folder = N'C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLData',
@data_file_size = 4, @log_folder = N'C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLData',
I get the following error when executing that command:
Msg 14430, Level 16, State 1, Procedure sp_adddistributiondb, Line 214
Invalid destination path C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLData.
It's not due to permissions on that particular folder. I have tried using other folders, all with the same results. Also, I am an Administrator on the PC, so I have full permissions. I have tried running the SQL Server services as myself and Local System. Same results both times. Co-workers with apparently the same setup are able to create the distribution database without a problem.
Has anybody had this type of problem?
Thanks,
Evan
I have created a FTP Task which is returning the value, "Error: 0x0 at FTP Task, SFTP Task: Invalid local path."
In my DB Table, the table contains a field for the location of files to be Ftp'd which is: C:/temp/ftp/OB/*
I believe my settings are correct and am curious to know if the above string should work or if I need a different syntax for the local variable.
I am having difficulty restoring a database (DB_1) with 2 datafiles and one log file, DB Structure is as following:
Filegroup PRIMARY with file name 'fnm_data' with physical file name and location D:dbfile_1.mdf,
Filegroup 'FG1' with file name 'fgnm1_data1' with physical file name and location F:dbfile_FG1.mdf,
One log file with file name 'fnm_log' with physical file name and location (E:loglog_db.ldf)
{Note} Logfile resides on E drive whereas Datafiles reside on several other drives.
I need to restore the DB on another machine. And I need to move the log file to a drive other than E.In this case it is K drive. Hence I have used the following code,
restore log DB_1 from disk='M:kupccciclog.txt'
WITH RESTRICTED_USER , MOVE 'fnm_log'
TO 'K:DBlog_db.ldf', recovery, replace,RESTART
go
When I try to restore from backup files, I keep error message saying "Physical file name E:loglog_db.ldf may be incorrect." 'fnm_log' cannot be restored. Use Move command to identify a valid location for the file.
Even though I am using Move command to move the log file.
Then I found that if I create a drive with E: and a folder named 'log' then restore program runs alright. That is, when E:log exists then code does run smoothly. All the restore code is looking for the presence of path of the log file from where it is been backed up. In this case it is E:log folder. Once the database is restored I could kill that directory and nothing happens. Also log file has been restored on K:DB only.
Why the restore code is looking for the initial drive letter and path even though I have used Move command? Is there an issue in my code?
Any help will be highly appreciated.
i'm working on an application using vs 2005, sql server2000, with c# asp.net
i can access many tables in my db that the dbo is the dbowner for them, but when i access few tables that the owner for them is dswebwork, i recieved an error says, invalid object name tbluser...which tbluser is table name...this is the error message in details.....
Invalid object name 'tblUsers'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Invalid object name 'tblUsers'.Source Error:
Line 57: string passWord = txtPassword.Text;
Line 58:
Line 59: Users users = new Users(Constants.DB_CONNECTION,
Line 60: userName, passWord);
Line 61: Source File: e:web worksWebworksDSCWebWorksLoginMaster.master.cs Line: 59 Stack Trace:
[SqlException (0x80131904): Invalid object name 'tblUsers'.]
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +95
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +82
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +346
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +3244
System.Data.SqlClient.SqlDataReader.ConsumeMetaData() +52
System.Data.SqlClient.SqlDataReader.get_MetaData() +130
System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +371
System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +1121
System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +334
System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) +45
System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) +162
System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior) +35
System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior) +32
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +183
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +307
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet) +151
WebWorksBO.DBElements.BaseDataSQLClient.FillDataset(DataSet dsToFill) in C:DevelopmentMyWebWorks20WebWorksBODBElementsBaseDataSQLClient.cs:97
WebWorksBO.DBElements.dbUsers..ctor(String connStr, String loginname, String loginpassword) in C:DevelopmentMyWebWorks20WebWorksBODBElementsdbUsers.cs:38
WebWorksBO.AppElements.Users..ctor(String connStr, String loginname, String loginpassword) in C:DevelopmentMyWebWorks20WebWorksBOAppElementsUsers.cs:370
LoginMaster.LoginUser() in e:web worksWebworksDSCWebWorksLoginMaster.master.cs:59
LoginMaster.imgbtnOK_Click(Object sender, ImageClickEventArgs e) in e:web worksWebworksDSCWebWorksLoginMaster.master.cs:46
System.Web.UI.WebControls.ImageButton.OnClick(ImageClickEventArgs e) +102
System.Web.UI.WebControls.ImageButton.RaisePostBackEvent(String eventArgument) +141
System.Web.UI.WebControls.ImageButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +31
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +32
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +72
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3840
so..i hope to help me...i need to deploy this project soon...
Hi Friends,
I have the below procedure in my local system for sending automatic mails in sql server 2005.
Create Procedure dbo.SendEmail1@To VarChar(500), @From VarChar(100), @Subject VarChar(200), @Body VarChar(1000), @SMTPServer VarChar(50)ASDeclare @Object int, @Hr int, @Src VarChar(255), @Desc VarChar(255)--Create Message objectExec @Hr = sp_OACreate 'CDO.Message', @Object OUTIf @Hr <> 0BeginExec sp_OAGetErrorInfo @Object, @Src OUT, @Desc OUT SELECT hr=convert(varbinary(4),@Hr), Source=@Src, Description=@DescReturnEnd--set sEndusing propertyExec @Hr = sp_OASetProperty @Object, 'Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sEndusing")', '1'If @Hr <> 0BeginExec sp_OAGetErrorInfo @ObjectReturnEnd--set port propertyExec @Hr = sp_OASetProperty @Object, 'Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/SEndUsingMethod")', '25'If @Hr <> 0BeginExec sp_OAGetErrorInfo @ObjectReturnEnd--set smtp server propertyExec @Hr = sp_OASetProperty @Object, 'Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver")', @SMTPServerIf @Hr <> 0BeginExec sp_OAGetErrorInfo @ObjectReturnEnd--Update the configurationExec @Hr = sp_OAMethod @Object, 'Configuration.Fields.Update', NullIf @Hr <> 0BeginExec sp_OAGetErrorInfo @ObjectReturnEnd--set TO propertyExec @Hr = sp_OASetProperty @Object, 'To', @ToIf @Hr <> 0BeginExec sp_OAGetErrorInfo @ObjectReturnEnd--set FROM propertyExec @Hr = sp_OASetProperty @Object, 'From', @FromIf @Hr <> 0BeginExec sp_OAGetErrorInfo @ObjectReturnEnd--set Subject propertyExec @Hr = sp_OASetProperty @Object, 'Subject', @SubjectIf @Hr <> 0BeginExec sp_OAGetErrorInfo @ObjectReturnEnd--set HTMLBody propertyExec @Hr = sp_OASetProperty @Object, 'HTMLBody', @BodyIf @Hr <> 0BeginExec sp_OAGetErrorInfo @ObjectReturnEnd--SEnd the mailExec @Hr = sp_OAMethod @Object, 'SEnd', Null If @Hr <> 0BeginExec sp_OAGetErrorInfo @ObjectReturnEnd--No memory leaks!Exec @Hr = sp_OADestroy @ObjectIf @Hr <> 0BeginExec sp_OAGetErrorInfo @ObjectReturnEnd
and executed as
SendEMail1 'x@x.com','a@a.com', 'Sending email through Stored Procedure', 'Body : An Email can be sent through stored procedure... and this is SAMPLE', 'smtpservername' This is working fine when I excuted the above procedure in the local system.
Same procedure I have created in the developement machine and excute it the it is giving error as
0x80040220 CDO.Message.1 The "SendUsing" configuration value is invalid. NULL 0
I need the suggestions on the above error and how to solve this in our development server.
Thanks,
I'm having trouble with cube processing. While processing a code I'm getting a "Invalid column name MessageType" error.
I unfolded the cube, then I opened "measure groups", my failing dimension (ServiceRequestDim) and the partition.
In the partition I opened the "Source" attribute so it now includes my column which was missing. But it didn't solve the issue.
If I get the query used during the process I'm getting this :
SELECT
DISTINCT
[ServiceRequestDim].[MessageType] AS [ServiceRequestDimMessageType0_0]
FROM
(
Select IsNull(IsDeleted, 0) as IsDeleted, [ServiceRequestDimKey], IsNull([Status_ServiceRequestStatusId], 0) as [Status_ServiceRequestStatusId],[Status],IsNull([TemplateId_ServiceRequestTemplateId], 0) as
[Code] ....
In the nested query which defines ServiceRequestDim the messagetype attribute is still missing. In my source datamart the ServiceRequestDim has the "MessageType" column.
So the question is where do I change the nested request that the dim process use to reflect the actual columns in my datamart .
i was deleting a row from my gridview.this fail ("System.Data.SqlClient.SqlException: Invalid object name 'MESSAGE'.") consists what must i do ?My SQL query is "UPDATE MESSAGESET DELETIONSTATUSTO = 1,_LASTMODIFYDATE =getdate() WHERE (_ID = @ID)"
View 5 Replies View RelatedI am trying to run a query on my sql server and get the following error message:
"An error occurred while executing batch. Error message is: The directory name is invalid."
how do I fix?
I am trying to set up a ODBC connection to a remote database using the ODBC data source administrator. I am getting an error message complaining of an invalid instance(). The database I am trying to connect to does have a default instance and a named instance. Do I need to specify the instance name somewhere in the connection settings? I tried specifying the server name as <Remote computer IP Address>/<Instance Name> but this didn't work. Any ideas?
View 4 Replies View RelatedHi,
I need to download 3 specific files from an ftp site each day. The file names DO change, so I am I going to have to use a variable to specify the file names.
My questions are:
Q. Is it possible to specify three specific files names in the "remote path" for an FTP task, using variables? If so, how?
Q. Is it possible to specify three specific names NOT using variables? If so, how? (I would like to know for future)
Or am I going to have to use 3 separate ftp tasks in either case?
Thanks much